lg g3 error entering recovery mode - G3 Q&A, Help & Troubleshooting

just in case my thread is at the wrong place please move it to the right place thanks in advance.
i just installed twrp recovery recently, but every time i'll try to boot into it it gives an error and then i need to remove the accu to reboot.
can someone tell me how to install a new version and may be a version that might work
Thanks in so much advance

Related

[Q&A] [REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975,

[Q&A] [REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975,
Q&A for [REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Unlocked & relocked with freegee ...
Hi guys
problem is when I tried to connect the charger while phone was off,didnt charge!
just phone started to boot!
so I restored the EFS backups & then Relocked bootloader!ALL on the stock 4.4.2a.
but after restart I got Secure booting error on the first lg logo!why that happend?
will flashing kdz fix that error???
Phone still stuck in boot
I tried this with my e975 but the stucks in boot just as before. What should i do?
I flashed the recommended files through LGNPST and at 85% or so the phone restarted. I went into Bootloader, then into Recovery and flashed my ROM with adb.
The phone now doesn't stop to boot. What am I doing wrong?
Please help me out,
Brabbel135
brabbel135 said:
I tried this with my e975 but the stucks in boot just as before. What should i do?
I flashed the recommended files through LGNPST and at 85% or so the phone restarted. I went into Bootloader, then into Recovery and flashed my ROM with adb.
The phone now doesn't stop to boot. What am I doing wrong?
Please help me out,
Brabbel135
Click to expand...
Click to collapse
you need to make a full wipe, including internal storage, you can do that in recovery mode after flashing your rom with sideload.
good luck and sorry for my bad english.
Coming from soft bricked Bell E973 (geeb) with CM10.1
I tried this method after having issues with KDZ updater / LG Flash Tool / LG Support Tool. Worked great!! Except when I tried to sideload a rom my device apparently had an identity crisis and thought it was a geehrc4g. Oops. There's not much information that I could find about whether this was applicable for my device but the OP seems to indicate as much. I suspect I would have been able to flash a geehrc4g rom and boot ok, but probably would have had a bunch of stuff not work...?
Anyway, somehow LG Flash Tool managed to work after that.
Thanx
Luv u so much..... i m very very thankful to you ....... bcz u solved my big problem.......... again thank you so much......... if anyone wana solve secure booting error in F180L in Pakistan contact me 03334180141 or mail me on [email protected]
Getting an error while using LGNPST-AGC
Hi people of XDA,
At first, my phone was non modified (original rom).
I was taking pictures with it when multiple apps crashed one after the others.
I decided to reboot it by holding the power button.
After the restart, my phone was like a brand new one. Asking me to reenter my Gmail and set it up each time I reboot the phone.
The "scan media files" icon keeps showing in the notif bar. I was able to use the phone but not taking pics or install apps.
My internal memory had 3 Go of free space before the crash, shows 0 bytes free after...
1) I try to hard reset it but when I confirmed the operation, the phone doesn't reboot as supposed.
2)I try the LG support tool to put back an original rom as the phone was still able to boot and connect to a computer.
But this step changed nothing.
3) As a third try, I used KDZ to flash a file (rom for E971) to find if it was a software or hardware problem.
After this step, my phone don't even want to boot anymore... I am stock to a steady LG logo which is normally animated few seconds before the boot.
Finally, as no recovery mode available, I try to put TeenyBin file (E971.E973.E975.F180 Original TeenyBin) from this procedure (http://forum.xda-developers.com/showthread.php?t=2249500) to my LGOG E971 and I got this error message. (see capture).
FYI : I have done this procedure without any sim card inside.
All the install process for LGNPST-AGC went fine.
My phone doesn't boot. Only the LG logo. I am able to put it in download mode.
This phone has never been rooted or unlock.
Anybody got this kind of error before??
Thanks for your hints in advance
Snowflake
I have briked lg f180k im able to go into download mode but it is not detected by computer. Is there any solution for this
Sent from my SM-J700F using Tapatalk
---------- Post added at 03:58 PM ---------- Previous post was at 03:54 PM ----------
Recovery isn't working either.
Sent from my SM-J700F using Tapatalk
Hi guys, i need some help here... I tried this method, and now my phone doesn't boot up... I can boot to download mode, it boots to fastboot too, but it doesn't load the recovery... It just appear that Google screen and then it just shuts down again... My phone is LG E950 europe model... Help needed here, please...

[Solution] if you flashed the wrong firmware on your LG G2

First of all I want to Thank cybertag (a member at reddit.com) whose help made me find this solution. And sorry if my English is not good, it is not my first language. As I don't have enough posts here, XDA restricts me to post external links so this is the best I could do. I will add links to the files needed once i am allowed.
A few days ago I was tinkering with after my lg g2 ls-980, the sprint version of lg g2, rooted but no custom recovery installed and I made my first mistake of changing the model number from ls-980 to D802 in built.prop file thinking that it will only change the model number shown in the hardware information and restarted the phone. Once my phone booted up after that restart everything was crashing. There was a huge number of crash reports popping on the screen and I was not able to use anything. So I downloaded the .tot files of the stock firmwares LS980ZVC and LS980ZVE (don't know why but I downloaded both) along with the .dll file needed to flash the firmware for ls980 and when I tried to flash the firmware booting the phone in download mode and using the LG Flash tool but it gave me an error saying that the firmware does not match with model number of my phone. Both firmwares gave the same error. My phone and the flash tool both were thinking it was D802 while it was not.
Now i made my second mistake and downloaded the stock firmware for D802 and flashed it using LG flash tool. The firmware was flashed successfully without any error, but when the phone booted up after the flash the touch screen was behaving funny and phone restarted every 15-20 seconds because this firmware was not meant to be used with LS-980. I was unable to do anything the way touch screen was behaving.
I spent most of my time for the next few days googling for the solution and searching on XDA and also on reddit. I found multiple threads reporting that a generic no-check DLL file is the savior in this situation, but when I tried to run it I get continuous errors telling me the following: "CrossDL [D8012] to [LS-980]". Then i found this thread by cybertag on reddit which lead me to the right direction. It suggested to hex edit the .tot file for ls-980 so that the flash tool thinks that it is for D802. So I grabbed a hex editor and found the first mention of LS-980 and changed it to D802, saved the file and tried o flash it but it was still giving different errors. Then someone suggested it only works if you edit the .tot firmware in linux based OS. So i installed ubuntu OS on a virtual machine and tried editing the firmware in that OS using Bless Hex editor, still no success in flashing. Then I tried editing in pinguy OS but in vain. Then I found FlexHex for windows and used it for editing the LS980ZVC.tot firmware did the same thing, found the first mention of LS-980 and changed it to D802, saved the file, flashed it and bingo! the flash tool gave no error this time and flashed the phone successfully.
Now there was another problem. When the phone rebooted after flashing the firmware it got stuck on LG logo forever. And when I tried to boot it into download mode, the download mode was gone and it took me to fastboot mode. The phone was stuck in bootloop and there was no download mode anymore. Now after more searching i found a method to resolve this problem. Downloaded the aboot.img and laf.img partitons for LS980ZVC and flashed both using fastboot commands. Tried to boot into the download mode again and it worked and i was in download mode one again. When I checked the phone model was changed back to LS-980, the original one. Flashed the LS980ZVE firmware from original .tot file as it was the latest version available to date and it flashed without any error. When the phone rebooted after completing the flashing process, it was as good as new, up and running the original stock kitkat rom for this model. Tested and tried everything and never noticed any issue.
Thank you @tauheed that will help a lot of people I'm sure.
Thank reddit member cybertag out there to.
please help
Hi sir!
i think i got just the problems with yours, but i not sure how to get my phone into fastboot mode no matter how many i press the [power+volume up] it just start up and stay at lg logo screen forever.
Can you explain how to get my LS980 into fastboot mode step by step, if i can put it in fastboot mode, i think i can fix it. please help
secret.animal said:
Thank you @tauheed that will help a lot of people I'm sure.
Thank reddit member cybertag out there to.
Click to expand...
Click to collapse
First of all, i'm sorry for my bad english.
i having the same problems as him. my LS980 is stuck at LG logo screen (not rebooting) it just stay there forever!
when i tried to boot it into download mode, at first i thought gonna successfully boot into download mode, but it DID NOT.
Please refer to my picture below to get better understanding what i'm trying to explain and again i'm sorry for my bad english.
My pc can detect my LS980 but not in fastboot mode, i mean if i try to boot into download mode then my pc won't detect it.
I really NEED some videos if possible of how to fix this, a million thanks!!!
[email protected] said:
Hi sir!
i think i got just the problems with yours, but i not sure how to get my phone into fastboot mode no matter how many i press the [power+volume up] it just start up and stay at lg logo screen forever.
Can you explain how to get my LS980 into fastboot mode step by step, if i can put it in fastboot mode, i think i can fix it. please help
Click to expand...
Click to collapse
what happens when you try to boot in to download mode?
it it stuck at download mode or something else happens?
Looks to be stuck with a broken download mode. His laf partition is broken.
tauheed90 said:
what happens when you try to boot in to download mode?
it it stuck at download mode or something else happens?
Click to expand...
Click to collapse
its just stuck like the picture that i attached below . it won't go any future.
Can you help fix this?
or what can i do to fix it?
i got a LG G2 LS980
secret.animal said:
Looks to be stuck with a broken download mode. His laf partition is broken.
Click to expand...
Click to collapse
hi m8, do you know how can i fix this?
please i really need some HELP over here, thank for reply
I'm looking into seeing how we can replace that laf partition that is broken. So we can fix this.
secret.animal said:
I'm looking into seeing how we can replace that laf partition that is broken. So we can fix this.
Click to expand...
Click to collapse
it sound like i'm in big problem right?
i'm total noob with this, sorry.
[email protected] said:
it sound like i'm in big problem right?
i'm total noob with this, sorry.
Click to expand...
Click to collapse
No problem, this is how we learn. One from the broken side and one from the fixing side. It's all good.
[email protected] said:
it sound like i'm in big problem right?
i'm total noob with this, sorry.
Click to expand...
Click to collapse
the only possible option is to flash the aboot.img and laf.img partitions. But we need to find a way to do so in your phone's current state. Things can be a lot easier if you could manage to get into fastboot mode.
tauheed90 said:
the only possible option is to flash the aboot.img and laf.img partitions. But we need to find a way to do so in your phone's current state. Things can be a lot easier if you could manage to get into fastboot mode.
Click to expand...
Click to collapse
Please help me out! i already bricked it for nearly 1 month already T_T
helo sir i am on window 7 i dont know how to edit modal number from hex can you please post a screen shots, i will be thanful to you plz sir help me otherwise my best will be just a plastic piece
i have wrongly flash lg g2 ls980 to d802 because the phone was refurbished
now phone is reboot and imei and baseband is unknown
so i am trying ur method but what do i have to edit in the hex editor
in flastool imei is getting shown but flash fails
please reply need urgent help
secret.animal said:
No problem, this is how we learn. One from the broken side and one from the fixing side. It's all good.
Click to expand...
Click to collapse
dear sir, i have lg d802 or d800, i dont know exactly bcoz seller sold me as d802.when i flashed stock kdz of d802 , its touch screen start weired behaviour, sometime stop reposnding or some thime i touch some thing else but some thing else selected.to check i opened the back of phone, its touch strips were written with d800 /801 and 803. but d800 was marked.so i flashed d800 tot file.after flashing phone boot but in boot loop.i can enter stock recovery to hard reset, but after that still boot loop.i can access download mode, but pc do not detect phone in download mode.when i power on in normal way than device manager shows modem and lg android net. but in download mode no detection.
what can i do in this situation? do this short capacitor method will work for me? or what else i can do to get it to life again,
plz waiting for response . it is same like attached pic of download mode in starting page of this thread
afzalcool said:
i have wrongly flash lg g2 ls980 to d802 because the phone was refurbished
now phone is reboot and imei and baseband is unknown
so i am trying ur method but what do i have to edit in the hex editor
in flastool imei is getting shown but flash fails
please reply need urgent help
Click to expand...
Click to collapse
majid.ayub999 said:
helo sir i am on window 7 i dont know how to edit modal number from hex can you please post a screen shots, i will be thanful to you plz sir help me otherwise my best will be just a plastic piece
Click to expand...
Click to collapse
You have to edit the first mention of the model number in the hex editor. Don't mess with anything else.
i was able to sole the problem.
have you found any solution?
[email protected] said:
its just stuck like the picture that i attached below . it won't go any future.
Can you help fix this?
or what can i do to fix it?
i got a LG G2 LS980
Click to expand...
Click to collapse
Have you found any solution to this problem?
I am the same problem as yours with another phone I have. It is a D800 which was wrongly flashed to D802. After flashing the D800 firmware with the model name edited, it is stuck on LG logo and it won't go to download mode either.
Not yet. I'm still waiting...total dead phone now.

GT N7100 no start error. No recovery. No Logo

Hello. I have been using Note 2 GT N7100 for over 3 years now. Have rooted the phone and was running a Crdroid custom ROM on it. It did not give me any problem. Nor did I update the ROM since it was running good.
Suddenly yesterday it got stuck on the Samsung logo. Tried restarting it, but it didn't move ahead of the logo.
Today, it shows a grey and white screen. Fully blurred and can't see the Samsung logo too.
Tried going into the recovery mode, but same grey screen appears.
If I take it in download mode, it goes there. But when I try to install any stock ROM, it doesn't work. It shows failed in Odin.
Please help what can be the possible problem?
If any more information is needed, I will provide it.
Any ROM to install or custom recovery?
Please guide what to do?
Also, I am sorry if there is already some post like this. Please let me know
Thanks in Advance!
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
harsh09046 said:
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
Click to expand...
Click to collapse
Hey thanks for the quick reply. Will try and get back to you.
Need a valid link for Recovery Package
[I moved this post to this section that's more apropriate http://forum.xda-developers.com/showthread.php?t=2154890 ]
Hi guys,
Is there a link for the Recovery Package/ROM ? (the one above doens't work)
My phone is stuck on the boot logo and I need to fix it... (I'm a bit noobish..)
I've had already downloaded those files but i'm not sure that there are the correct files to use in the step 4 of this tutorial (Recovery Package/ROM).
- N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
- N7100XXUFND3_N7100OXAFND3_XEF.zip
Thank you a lot !
Mimo_0

LG G3 D851 10f at Zero stage Help.. Urgent Please someone

hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....
GeekYagami said:
hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....
Click to expand...
Click to collapse
Personally i don't really like flashify or any other similar apps.But as you are a beginner at all these follow this simple steps.
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.[/QUOTE]
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started
GeekYagami said:
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.
Click to expand...
Click to collapse
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started[/QUOTE]
Try re-flashing your Stock ROM.
Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.
GeekYagami said:
Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.
Click to expand...
Click to collapse
I'll link you and a guide on how to reflash dl mode.
Edit: Here https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120
First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.
GeekYagami said:
First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.
Click to expand...
Click to collapse
I see that you have messed a lot with your system partitions.
I'll try to find something helpful.
Till then try checking if you can use system upgrade.(To go for example to lollipop while it may save your phone and also be able to flash the correct laf.img)
Question:After you finished the procedure on flashing the laf.img(for d851)(also you can flash the 10d laf.img as the OP said in the guide)did you pull the battery out and Boot to download mode(manually)?
How to get to Download Mode
yes i did try to boot into dl mode manually..
GeekYagami said:
yes i did try to boot into dl mode manually..
Click to expand...
Click to collapse
You also did pull the battery after flashing laf.img(10d) for D851 Model?
So... I think that after you tried doing all these and nothing worked, you'll be unable to get Download mode back,but let me check some of the system partitions and check if you can manually insert the laf.img file.
Somehow you can insert the laf file to your phone but it needs extracting (the laf.img) to get the proper file.
I found the location of the laf file.
But if anyone can be found with D851 can send the laf file here for you.
Two other solutions are:
1.Staying without dl mode? Maybe.
2.Buying a new motherboard.
Links to LAF files in this post:
https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120
Specifically, here's the download site for stock partitions:
http://downloads.codefi.re/autoprime/LG/LG_G3/D851/stock_partitions
hey there ...
mate there is some serious trouble im into.. my software said its D851 but when i opened the case i've found LS990 on the motherboard.my phone is now in Qualcomm HS-USB Qdload 9008 mode..what should i do now.. help me on this..i've tried board diag its says device not found in dload mode try flsh programmer.something like that.. what to do i've bricked my phone..and the repairing guy is asking for around 90$.. what should i do now..
Try using the LAF for the LS990, here:
http://downloads.codefi.re/autoprime/LG/LG_G3/LS990
I'm not familiar with the Qdload mode, or what to do there, so sadly other's will have to help you out.
@GeekYagami
Check here:
https://forum.xda-developers.com/lg-g3/help/how-to-hard-unbricked-lg-g3-variants-t3394575
It discusses the mode you seem to be in.

Update from P2a42_S233_170404_ROW when OTA is not working

Hi,
My Lenovo P2 uses the stock rom in P2a42_S233_170404_ROW version.
I can't download any OTA updates, maybe because my phone is rooted and its bootloader is unlocked.
Could you please tell me how to update it to its last version, without losing any data?
Thanks for your kind help
It's Ok..
https://forum.xda-developers.com/lenovo-p2/development/lenovo-p2-lenovo-p2a42-stock-nougat-t3661024
Thanks for your quick answer.
Unfortunately the S251 link is broken/offline.
Would you please tell me where I can find it?
Thanks for your quick answer.
Unfortunately the S251 link is broken/offline.
Would you please tell me where I can find it?
https://drive.google.com/file/d/11h3YizvxUvFElBiMwqY2vjCMvvKATxBA/view?usp=drivesdk
Wipe cache and system, after installation I made root, I have not deleted data .. But if you want a clean installation ..
Hi, my device is not detected in pc, please help, it is stuck at boot. In pc, it is showing as adb device as emty
jahan18 said:
Hi, my device is not detected in pc, please help, it is stuck at boot. In pc, it is showing as adb device as emty
Click to expand...
Click to collapse
When phone is in boot it is not adb hence obviously it will show empty type fastboot devices and see

Categories

Resources