Develop Bugs

[Huawei IDEOS U8150][DEVELOPERS] BootBuilder-U8150

Finally the script has done!!!!​
Unpack and repack of boot.img or recovery.img can be possible without errors!!
put boot.img in bootworkspace and use the scripts!...that's all!
http://www.mediafire.com/?rvnbbxgw0zzn46l
as always...if some1 liked my work and want donate me a beer, there is the link
Credits:
JackTheVendicator
m2te from modaco
Me

great work man

great work!
this script it's only for ideos or i can use it with any boot.img?
thanks!

Thank you

attached there are the tools compiled for windows users.
http://www.multiupload.com/AGJV3KXLDI
Have Fun!

it seems nice... Thanks!
Yet, i have some noob questions about this:
- is this useful to backup / restore entire phone content (kernel, apps, data, config, ...). That is what I am looking for. I tried Rom Manager but it seems that ClockworkMod does not work with the U8150...
- I guess scripts have to be launched from a linux terminal (Ubuntu OK?) after connecting the U8150 with USB? (should I mount it before?)
- User only has to launch Build-bootimg to create a backup?
- and Unpack-bootimg to restore??
- what about Build-ramdisk?
- I guess the tools mkboot* are called by the scripts and do not have to be launched manually, right?
Thanks for your work and help!

Hi, i've croos-compile new kernel with new modules and get new zImage. With this scripts i get new boot.img but when i flash the boot partition (with fastboot) the phone freezes at main screen.HELP!!!

Great post man. I've been looking for this.

Thanks, this is a big help. Compiling the Froyo kernel source from Huawei was easy, but I was pulling my hair out trying to generate a working boot.img. It's pretty confusing that there are so many unpack/extract/split scripts out there...
Thanks to both you and mt2e over at Modaco for doing the hard work on this one.

Thank you
Thanks for Bootbuilder That's too usefull for my project thanks again

bootworkspace
what is bootworkspace ?

Help!
Can anyone please explain me how to use it???
(Sorry for being a Noob)

bootworkspace is in the tarball...
ammarabbasi said:
Can anyone please explain me how to use it???
(Sorry for being a Noob)
Click to expand...
Click to collapse
bootworkspace is inside the tar file, see:
Code:
[[email protected]: ~/Downloads]$ tar ztf BootBuilder-U8150.tar.gz
BootBuilder-U8150/
BootBuilder-U8150/Tools/
BootBuilder-U8150/Scripts/
BootBuilder-U8150/bootworkspace/
...
...
BootBuilder-U8150/Tools/mkboot/sha.o
BootBuilder-U8150/Tools/mkboot/rsa.h
BootBuilder-U8150/Tools/mkboot/bootimg.h
You have to unzip the tarball and then you'll be able to see the folder. Place your boot.img in there and then you can unpack and repack it using the scripts in the Scripts directory.

aorth said:
bootworkspace is inside the tar file, see:
Code:
[[email protected]: ~/Downloads]$ tar ztf BootBuilder-U8150.tar.gz
BootBuilder-U8150/
BootBuilder-U8150/Tools/
BootBuilder-U8150/Scripts/
BootBuilder-U8150/bootworkspace/
...
...
BootBuilder-U8150/Tools/mkboot/sha.o
BootBuilder-U8150/Tools/mkboot/rsa.h
BootBuilder-U8150/Tools/mkboot/bootimg.h
You have to unzip the tarball and then you'll be able to see the folder. Place your boot.img in there and then you can unpack and repack it using the scripts in the Scripts directory.
Click to expand...
Click to collapse
can you post tutorial for windows users, thanks

[ROMs][ALL-IN-ONE] SPICE-MI 350n Super Thread !(18 Apr)

Spice Mi-350n Super thread !​
DISCLAIMER: I'm not responsible for any damage caused to your device by these instructions (though it may not happen!).
Hi everyone,
this thread will have everything for your Spice-Mi 350n.
Put you general discussions here (or) at Spice Mi-350n thread !
NEW Spice Mi-350n dedicated website !! Under development !! Have a look at it HERE
____________________________________________________________________________________________________________________________
SPICY MODS
____________________________________________________________________________________________________________________________
Go here: http://forum.xda-developers.com/showthread.php?p=24955301#post24955301
____________________________________________________________________________________________________________________________
NEW CUSTOM ROMs !
(alphabetical)
____________________________________________________________________________________________________________________________
1. ROM ATLANTIS (deodexed) : HERE !
Click to expand...
Click to collapse
2. BALA's ROM(odexed & deodexed): HERE !
Click to expand...
Click to collapse
Everyone try and reply !!
____________________________________________________________________________________________________________________________
I . ROOTING :
____________________________________________________________________________________________________________________________
First of all root your phone. Didn't root your phone yet ? Don't worry. Follow this guide here: http://forum.xda-developers.com/showthread.php?t=1472026
____________________________________________________________________________________________________________________________
FLASHING TUTORIAL - UNBRICKING GUIDE :
____________________________________________________________________________________________________________________________
Flashing Tutorial (also for Unbricking your phone) by yasirmujtaba : http://forum.xda-developers.com/showthread.php?p=24516131#post24516131
HIT THANKS IF IT HELPED YOU !!
___________________________________________________________________________________________________________________________
II . BACK-UP STOCK ROM/ ROM DUMP :
___________________________________________________________________________________________________________________________
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from Tools Box (scroll down) or attachments and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
______________________________________________________________________________________________________________________________
III . RECOVERY :
______________________________________________________________________________________________________________________________
Default android recovery lacks few important features such as 'Back-up/Restore', 'Partition SD' etc.
Here is a working recovery that can be replaced with your default recovery.
-- MODDED RECOVERY (4pda.ru):
[Working Successfully!]
Screen Shot
It is a very useful recovery with many features. It is a must if you want to mod your phone !
Downloads: download from the Tools Box or attachments.
Installation Instructions:
Extract the downloaded 'Modded Recovery.zip' to you SD card. It will have a *.img file.
Download and install MobileUncle Tools. Get it from Tools Box or attachments !
Install and open MobileUncle Tools -> Get Started -> Flash Recovery from SD -> Select the extracted *.img file. Allow it when it asks for SuperUser permission. It should take less than few minutes. Enjoy the new features !
IMPORTANT TIP: After installing modded recovery, do a full a nandroid backup.
Intructions: Go to Recovery mode[HOME button + Volume Up + Power Button] -> Backup/restore.
[IMP: NOT WORKING]ClockWorkMod [CWM] Recovery(China-Iphone.ru):
It is claimed that it works with every MTK6573, 650mhz, Android 2.3 (B63M) device.It is not working with our device. No problem. Modded recovery will do everything for you !
Download (AT YOUR OWN RISK): download from the Tools Box or attachments.
Same installation instructions. Even if you try this and it doesn't work, don't get afraid. Boot normally and flash MODDED RECOVERY through MobileUncle Tools ! Enjoy !
Well, if you think you can make it work, try and edit it !
____________________________________________________________________________________________________________________________________
TOOLS BOX :
____________________________________________________________________________________________________________________________________
ADB Drivers: Click HERE
Back Up Tools: Click HERE
Mobile Uncle Tools: Click HERE
Recovery:--Working Modded Recovery: Click HERE
--(Not Working) CWM Recovery: Click Click HERE
Super One Click v2.3.1: Click HERE

_____________________________________________________________________________________________________________________________
CREDITS:
_____________________________________________________________________________________________________________________________
Sincere credits to linerty, Highwaystar and all users of this phone, 4pda.ru, china-iphone.ru, moyfly.ru, more importantly GOOGLE TRANSLATE !! ! And cheers to all Spice Mi-350n users !
Few more to come !! Keep checking or subscribe this thread !!
Hit THANKS if i helped you

Flashing Tutorial ..........Coming Soon !

Last reserve !

awesome bro........
can you please provide
com.huan.launcher 's apk I deleted that mistakenly .....

good job... can you provide me build. prop. .. i seem to have messed up mine.

what is build.prop can you please explain

yasirmujtaba said:
what is build.prop can you please explain
Click to expand...
Click to collapse
it's one of the most important file. my video recording is not working because i messed up my build. prop. .. so don't mess with it if you don't know what you are doing. use root explorer and find it in system folder.. ..
copy the build. prop and give me if you can.

Im having a problem with Backing Up ROM
it shows close(Auto closing is canceled) instead of Disable
Now what should i do..
Plz help

yasirmujtaba said:
awesome bro........
can you please provide
com.huan.launcher 's apk I deleted that mistakenly .....
Click to expand...
Click to collapse
Default launcher error ?? Then here is the default launcher's [LauncherHQ] apk from /system/app !!

build.prop !
billamin said:
good job... can you provide me build. prop. .. i seem to have messed up mine.
Click to expand...
Click to collapse
build.prop from root !! Here it is !! (it is compressed as .rar and NOT renamed!)

Auto Closing is cancelled !
maitreyapatni said:
it shows close(Auto closing is canceled) instead of Disable
Now what should i do..
Plz help
Click to expand...
Click to collapse
Thanks man ! i had typed it wrong ! it is actually 'Auto Closing is cancelled' don't worry there's nothing in that....it is just a hint for you know that backing up is over !!

billamin said:
it's one of the most important file. my video recording is not working because i messed up my build. prop. .. so don't mess with it if you don't know what you are doing. use root explorer and find it in system folder.. ..
copy the build. prop and give me if you can.
Click to expand...
Click to collapse
Here it Is What You Want My New Firmware's Build.prop
Download It From Attachments

yasirmujtaba said:
Here it Is What You Want My New Firmware's Build.prop
Download It From Attachments
Click to expand...
Click to collapse
New Firmware ??????

balamu96m said:
New Firmware ??????
Click to expand...
Click to collapse
I mean the firmware just after Flashing...........
---------- Post added at 02:04 PM ---------- Previous post was at 01:48 PM ----------
yasirmujtaba said:
I mean the firmware just after Flashing...........
Click to expand...
Click to collapse
I Have A Gift For You Friends
Here -
http://forum.xda-developers.com/showthread.php?p=23246387

yasirmujtaba said:
I mean the firmware just after Flashing...........
---------- Post added at 02:04 PM ---------- Previous post was at 01:48 PM ----------
I Have A Gift For You Friends
Here -
http://forum.xda-developers.com/showthread.php?p=23246387
Click to expand...
Click to collapse
Is that working ??? i can't try because i'm always using Wi-fi in my home.....if someone tries n reply, it would be helpful !!

balamu96m said:
Is that working ??? i can't try because i'm always using Wi-fi in my home.....if someone tries n reply, it would be helpful !!
Click to expand...
Click to collapse
You Can Turn Off Your Wifi And Then Try
Balance Must be Under 30 paisa

yasirmujtaba said:
You Can Turn Off Your Wifi And Then Try
Balance Must be Under 30 paisa
Click to expand...
Click to collapse
Former Rokr e6 user?? Member in motorolafans.com forums??

yup I am..........

build. prop edited
hi, here is the modified build.prop. check it out

Can someone please! HTC 2.3.3 Sense 2.1

Can someone please copy all system files from HTC Wildfire S STOCK ROM: 2.3.3 Sense 2.1 or 2.3.5 ... not BACKUP (boot.img,system.img...) and upload it to mediafire,4shared???
I'm user of Xperia X8 and I need HTC Wildfire S system files,because I want to create sense for our x8 ,but I don't have htc .
Please HTC Wildfire S user,please upload system files not BACKUP!!!
Thank you!

2010matej said:
Can someone please copy all system files from HTC Wildfire S STOCK ROM: 2.3.3 Sense 2.1 or 2.3.5 ... not BACKUP (boot.img,system.img...) and upload it to mediafire,4shared???
I'm user of Xperia X8 and I need HTC Wildfire S system files,because I want to create sense for our x8 ,but I don't have htc .
Please HTC Wildfire S user,please upload system files not BACKUP!!!
Thank you!
Click to expand...
Click to collapse
Try any odex version of sense rom. Full versions will do. Look in the development section. Many roms are there, download one and unzip your required files. Its a pain to upload around 70 mb with slow network like mine. I'd suggest wildchild sense. Direct Download

finance.resat said:
Try any odex version of sense rom. Full versions will do. Look in the development section. Many roms are there. Id suggest kims mod, download that at unzip your required files. Its a pain to upload around 70 mb with slow network like mine. I'd suggest wildchild sense
Other roms are also there.
Click to expand...
Click to collapse
I know that there's a lot of rom,but all roms include boot.img,but our x8 doesn't have it !
Please upload all system files,please. I have very slow internet too and I must upload my ROM MV3 with 200mb (takes about 3hours).
Just 70mb??? I mean all system not just app folder!

2010matej said:
I know that there's a lot of rom,but all roms include boot.img,but our x8 doesn't have it !
Please upload all system files,please. I have very slow internet too and I must upload my ROM MV3 with 200mb (takes about 3hours).
Just 70mb??? I mean all system not just app folder!
Click to expand...
Click to collapse
extract the rom.zip from finance.resat links given, you will get all system apps
PS: Oh you mean system folder?
Sent from MARVEL

asdot said:
extract the rom.zip from finance.resat links given, you will get all system apps
Sent from MARVEL
Click to expand...
Click to collapse
Can you send me that link to rom please? And if I extract it,is there BOOT.IMG file?? Because our x8 doesn't have it

2010matej said:
Can you send me that link to rom please? And if I extract it,is there BOOT.IMG file?? Because our x8 doesn't have it
Click to expand...
Click to collapse
boot.img yes, system.img no. There are system app, lib, etc, font, media bla bla bla.... i dont remember
Sent from MARVEL

asdot said:
boot.img yes, system.img no. There are system app, lib, etc, font, media bla bla bla.... i dont remember
Sent from MARVEL
Click to expand...
Click to collapse
What is in boot.img? Will rom work without that?

Rom will not boot without that. But I thought you need only the system files. Download the rom from the direct download link. In that zip you will see a folder name system. And in that folder you'll see another folder named app. I know nothing about porting. So I don't know if you put these system apks in your mobile, it will work or not. I personally tried to put sense 3.5 system apks in sense 2.1. They never worked. I'll upload the sense 2.1 latest files. Wait a little as my upload rate is quite low.
Sent from my HTC Wildfire S A510e using Xparent ICS Tapatalk 2

How can i port sense to x8 that will boot normaly??? We have armv6 and 600MHz so I want to port from HTC Wildfire S!

2010matej said:
How can i port sense to x8 that will boot normaly??? We have armv6 and 600MHz so I want to port from HTC Wildfire S!
Click to expand...
Click to collapse
Trust me HTC sense 2.1 is total bullsheet. U r operating system is way better. I am always using either non-sense versions or sense 3.5.
I know nothing about porting. I am not a dev. There are posts about them in many places. I havent read those yet. U can research on google code/xda/youtube/wiki etc.

finance.resat said:
Trust me HTC sense 2.1 is total bullsheet. U r operating system is way better. I am always using either non-sense versions or sense 3.5.
I know nothing about porting. I am not a dev. There are posts about them in many places. I havent read those yet. U can research on google code/xda/youtube/wiki etc.
Click to expand...
Click to collapse
Believe me 2.1 Sense is better then our Eclair 2.1!
My father has wildfire s and how good it's touch on it,ohhh. We have fake dual touch on x8,because sony corporation didn't make dual touch on x8!

Simply use an ruu to restore it
Sent from my SGH-T959V using xda premium

rezo609 said:
Simply use an ruu to restore it
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Restore on x8??? In xrecovery???

Ok here it is. Uploaded from latest rom 2.26.401.3 download link

2010matej said:
Restore on x8??? In xrecovery???
Click to expand...
Click to collapse
Hi,
as rezo said simply download HTC Stock RUU, run it on PC while it starts, goto explorer type %temp% on navigator, you will see a long folder name with this { } , inside in a sub folder you will find Rom.zip. Copy it and unzip it. You can get all the system files of a HTC Stock ROM, including system.img, boot.img and recovery.img.
If you are achieved the task with Sony Ericsson, pls post it back.
Hope this may be useful. (if really press 'Thanks')

finance.resat said:
Ok here it is. Uploaded from latest rom 2.26.401.3 download link
Click to expand...
Click to collapse
Just app folder?

Senthamil said:
Hi,
as rezo said simply download HTC Stock RUU, run it on PC while it starts, goto explorer type %temp% on navigator, you will see a long folder name with this { } , inside in a sub folder you will find Rom.zip. Copy it and unzip it. You can get all the system files of a HTC Stock ROM, including system.img, boot.img and recovery.img.
If you are achieved the task with Sony Ericsson, pls post it back.
Hope this may be useful. (if really press 'Thanks')
Click to expand...
Click to collapse
But this doesn't help me I hate .img files) . Our x8 has cache.img data.img system.img if we made backup. But if we create flashable zip to flash in recovery,there's no .img files. There is just system folder and meta-inf!
Forget all,thanks for helping me. I'm just not guy for porting!

2010matej said:
Just app folder?
Click to expand...
Click to collapse
What do you need? Whole system folder?

finance.resat said:
What do you need? Whole system folder?
Click to expand...
Click to collapse
Forget,it's okay! I'l not port rom. I even don't know!

2010matej said:
Forget,it's okay! I'l not port rom. I even don't know!
Click to expand...
Click to collapse
Actually, what the purpose of this thread?
Sent from MARVEL

remix os for v820w ch no wifi&BT

onda v820w ch tablet has two version
V1 and V3V5
my tablet is V1 , after use official v820wch rom , no wifi& BT
wifi device is RTL8723BS ....
I see 8723bs.ko in system/lib/modules , but I can't find modprobe command to load this driver
please help ....

wgarnett said:
onda v820w ch tablet has two version
V1 and V3V5
my tablet is V1 , after use official v820wch rom , no wifi& BT
wifi device is RTL8723BS ....
I see 8723bs.ko in system/lib/modules , but I can't find modprobe command to load this driver
please help ....
Click to expand...
Click to collapse
What happens when you do insmod /system/lib/modules/8723bs.ko? I've got the ROM for V820W CH working on similar device (Cube iWork8 Ultimate) which also uses rtl8723bs.
You will also need to copy /system/vendor/lib/libbt-vendor.so, /system/etc/bluetooth and /system/etc/firmware/bt from your stock ROM.

copy and then ??????

re
Did you solve it? I have same problem no wifi :/

Raiper34 said:
Did you solve it? I have same problem no wifi :/
Click to expand...
Click to collapse
no modprobe command to load 8723bs.ko
it need linux to extract image
it need modify *init*.sh to load 8723bs.ko
and repack image

wgarnett said:
no modprobe command to load 8723bs.ko
it need linux to extract image
it need modify *init*.sh to load 8723bs.ko
and repack image
Click to expand...
Click to collapse
Can you copy paste, *init*.sh file or upload it here? I newer work with android roms...

Anyone tried this ROM with V3 version?

Raiper34 said:
Can you copy paste, *init*.sh file or upload it here? I newer work with android roms...
Click to expand...
Click to collapse
/etc/init.atomisp.sh
I think need to edit this .sh and add 8723bs.ko , path is lib\modules

NeKit1000 said:
What happens when you do insmod /system/lib/modules/8723bs.ko? I've got the ROM for V820W CH working on similar device (Cube iWork8 Ultimate) which also uses rtl8723bs.
You will also need to copy /system/vendor/lib/libbt-vendor.so, /system/etc/bluetooth and /system/etc/firmware/bt from your stock ROM.
Click to expand...
Click to collapse
Are you saying you have a Remix ROM for the Cube iWork8 Ultimate?
That's what I'm looking for all over the place!
I have a Cube i6 with Remix that is great, but got the Cube iWork8 Ultimate with Windows 10 that I hate hate hate. I don't know how people can function on that since the Windows buttons are so tiny and lots of screens wont resize. Even after using the Intel graphics manager to lower resolution to get bigger buttons it still sucks. And there is no decent Start menu, all them stupid tiles that I can't figure how to get rid of, can't find Control Panel without going to Settings and searching for it...yada yada. Did I mention I hate it?
So if you have Remix working on Cube iWork8 Ultimate, give it here boyo! I will write a haiku or put a picture of you as my background, whatever you want.

Hebekiah said:
Are you saying you have a Remix ROM for the Cube iWork8 Ultimate?
That's what I'm looking for all over the place!
Click to expand...
Click to collapse
Do you have Windows/Android dualboot installed on it? Contact me in PM, since that's probably for another topic.

wgarnett said:
/etc/init.atomisp.sh
I think need to edit this .sh and add 8723bs.ko , path is lib\modules
Click to expand...
Click to collapse
Do no have your system.img? Because my modification did not help me, bootloop, I only add module to init file...

Raiper34 said:
Do no have your system.img? Because my modification did not help me, bootloop, I only add module to init file...
Click to expand...
Click to collapse
I only has windows environment , it unpack/repack will damage system.img inside files permmision ....
so I don't have any modified version img files
I think this work need linux environment to repack

wgarnett said:
I only has windows environment , it unpack/repack will damage system.img inside files permmision ....
so I don't have any modified version img files
I think this work need linux environment to repack
Click to expand...
Click to collapse
I followed this tutorial to unpack it, add line inside init script and then again pack into img file. http://forum.xda-developers.com/showthread.php?t=1588461

Raiper34 said:
I followed this tutorial to unpack it, add line inside init script and then again pack into img file. http://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
so , do you success to flash this modified firmware and make wifi work ????
if it work , plz share to public

wgarnett said:
so , do you success to flash this modified firmware and make wifi work ????
if it work , plz share to public
Click to expand...
Click to collapse
Sadly no, bootloop :/

Raiper34 said:
Sadly no, bootloop :/
Click to expand...
Click to collapse
do you get android firmware with gapps included ?

wgarnett said:
do you get android firmware with gapps included ?
Click to expand...
Click to collapse
I modified original Remix rom.

Raiper34 said:
I modified original Remix rom.
Click to expand...
Click to collapse
do you success to make v820w ch v1 wifi working now ?

Raiper34 said:
Sadly no, bootloop :/
Click to expand...
Click to collapse
do you try to use RMXtools v1.7 Fix to unpack and repack ?

wgarnett said:
do you try to use RMXtools v1.7 Fix to unpack and repack ?
Click to expand...
Click to collapse
I will try it thanks, did you really have wifi now?

[TOOL]SplashInjector[OP5]

SplashInjector​splash injector is a tool created by me based on the work done by @makers_mark . it is a basic command line interface but it gets the job done. it supports all oneplus devices so far except the oneplus x :crying: i can add support once someone gets me the logo.bin file from that device. The tool is pretty simple its based on the work here https://forum.xda-developers.com/oneplus-3/themes/mod-splash-screen-image-injector-t3441999 this is where i got this all from. i know it can be kinda hacky and only supports unix systems i think you can get it working by using git bash on windows. In its current state it can decode and encode all oneplus logo.bins (Including the OnePlus 5!) it can also pack flashable zips for you automatically. all you need to do is run the decode option edit the file you want in the output folder. Then you can run the encode command and it will pack it all back up. Then package it with the package command. Once again major credit to @makers_mark he did all the leg work. i just made it a little more friendly. lmk if there is any issues you find
Telegram: @ethanbanker if you need anything contact me here.
Now lets get to it
follow the instructions here located here
https://github.com/ethanbanker2428/SplashInjector
Updates:
1.52: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
WARNING I AM NOT RESPONSIBLE FOR ANYTHING YOU DO. DO THIS AT YOUR OWN RISK

Excellent...... working great for OP5
Thanks

biohaz55 said:
Excellent...... working great for OP5
Thanks
Click to expand...
Click to collapse
Hi, I can't get it working on Windows. If I send you a PNG will you make me a zip?

Thanks! Here is the Windows binary and src for logoinjectorv1.52.

makers_mark said:
Thanks! Here is the Windows binary and src for logoinjectorv1.52.
Click to expand...
Click to collapse
thanks im gonna rebuild with the newest version and probably work on a windows version tonight :good:

Can you make a captain America one?

can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus

freakzapster said:
can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus
Click to expand...
Click to collapse
did u use option 3? package? that should make one after you edit the files

bobglaus said:
did u use option 3? package? that should make one after you edit the files
Click to expand...
Click to collapse
actually i dont know to edit files i am new to this thats why i am not understanding

freakzapster said:
actually i dont know to edit files i am new to this thats why i am not understanding
Click to expand...
Click to collapse
click the help option. i feel it explains it pretty well. to edit the png in the output folder use gimp or photoshop

Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push

bobglaus said:
Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push
Click to expand...
Click to collapse
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.

badtzo said:
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.
Click to expand...
Click to collapse
bgr does **** up the colors a bit or fixes it. its one of those things where you use it if you need it and you will know if you need it.
also update to anyone else that update will have to wait. im a perfectionist and im revamping the whole thing to alot cleaner code. windows should work tho and the oneplus x will be supported hopefully too

Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector

bobglaus said:
Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
Click to expand...
Click to collapse
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.

Bigs1985 said:
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.
Click to expand...
Click to collapse
use the tool i linked in the post you qouted

bobglaus said:
use the tool i linked in the post you qouted
Click to expand...
Click to collapse
I thought it didn't package the zips correctly? Is that fixed?

Bigs1985 said:
I thought it didn't package the zips correctly? Is that fixed?
Click to expand...
Click to collapse
No this one https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772

how can i pull LOGO.bin from my oneplus 5?
when i run:
adb shell dd if=/dev/block/sde17 of=/sdcard/partition/LOGO.bin
Click to expand...
Click to collapse
i get this error message:
dd: /dev/block/sde17: Permission denied
Click to expand...
Click to collapse
Please help
Thanks

spicemaster said:
how can i pull LOGO.bin from my oneplus 5?
when i run:
i get this error message:
Please help
Thanks
Click to expand...
Click to collapse
Of course you need root，The right command is
adb shell su -c dd if xxxx