Related
At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Eagle-no1 said:
At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Click to expand...
Click to collapse
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
mele80 said:
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
hi i want this tablet the 8.0 version do you recommend it and is this android 6 official for 8.0 version?
So does this mean somebody could actually make a Marshmallow custom ROM for the M2?
:good: excellent news,
nice news.. hopefully someone generates and m10 version from this
It is a full-featured Android 6 or what it is ?Thanks
stosun said:
It is a full-featured Android 6 or what it is ?Thanks
Click to expand...
Click to collapse
1st post has all what I know of the package.
Hello, what is the procedure to update my M8?
Guys this isn't an update per se. It is open source kernel and drivers which (hopefully) will allow somebody to create a custom ROM from.
Anyone able to develop something like cm or if these kernel sources?? Have been waiting for this for ages. I'll start using my m2 8.0 again! Stupid emui 3!!!
Seconded. Would love to get an update. The hardware is good but the OS feels so old!!
How about the M2 10" (M2 A01L) for update ?
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Caelestiel said:
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Click to expand...
Click to collapse
What did you flash?
Mxplorer said:
What did you flash?
Click to expand...
Click to collapse
i did something wrong in formatting. I didnt flash anything
(see my last reply for updated status)
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Mxplorer said:
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Click to expand...
Click to collapse
I didnt flash anything, I accidentally wiped system partition, all I need is a stock rom to be flashed again
All I can find is firmware zip with dload and UPDATE.app inside.
-I can only boot into recovery...
-Stock Rom of 801L is ALL I need.
https://www.youtube.com/watch?v=DyUainEJwLM
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Mxplorer said:
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Click to expand...
Click to collapse
thank you but, I think I already downloaded it, What I need is a flashable zip... because I have no OS
btw what model of M2 are you using? may I ask for a TWRP backup ofcourse without your data, only the needed ones to regain my os...
Hi All,
I have install Miui 7 Beta in my phone Nokia X.
All the system is Ok but I can not connect my wifi and when the system start he show this message ~You need to install a developper version to activate root permission~.
Some one have an idea to resolve this issue?
Thanks
MohamedAliGarouachi said:
Hi All,
I have install Miui 7 Beta in my phone Nokia X.
All the system is Ok but I can not connect my wifi and when the system start he show this message ~You need to install a developper version to activate root permission~.
Some one have an idea to resolve this issue?
Thanks
Click to expand...
Click to collapse
link to.that rom?
MohamedAliGarouachi said:
Hi All,
I have install Miui 7 Beta in my phone Nokia X.
All the system is Ok but I can not connect my wifi and when the system start he show this message ~You need to install a developper version to activate root permission~.
Some one have an idea to resolve this issue?
Thanks
Click to expand...
Click to collapse
where's the rom??? why r u not sharing it??
MohamedAliGarouachi said:
Hi All,
I have install Miui 7 Beta in my phone Nokia X.
All the system is Ok but I can not connect my wifi and when the system start he show this message ~You need to install a developper version to activate root permission~.
Some one have an idea to resolve this issue?
Thanks
Click to expand...
Click to collapse
We don't have the ROM. If you give us a downloadable link to the ROM, it will be helpful to fix the bugs.
abhijit1998 said:
We don't have the ROM. If you give us a downloadable link to the ROM, it will be helpful to fix the bugs.
Click to expand...
Click to collapse
its fake
ani00 said:
its fake
Click to expand...
Click to collapse
I think so. The Miui 7 which is shown in YouTube for our devices is also fake I think. When tried to download it told me to complete a survey. Not sure if survey complete will help me download the ROM. But it is paid. I used some bypass the survey trick but failed. Also the size shown in the page is 270MB(approximately).
I was searching for Xperia T3 custom ROMs and I didn't find any ROMs for it except for the stock ROM and the other ROM that I found, the guy said it wasn't tested if it was buggy. Also I never found a 7.0 ROM for it but I also found duplicate vids which were fake, because people said it in the comments. Guys will you develop a ROM for it or can I find the stable 6.0 ROM?
Written on the Xperia T3
I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you ?
rmnhg said:
I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you
Click to expand...
Click to collapse
I think those phones are cheap. Mines unlocked.
SonyXperiaUser14 said:
I think those phones are cheap. Mines unlocked.
Click to expand...
Click to collapse
? What do you mean?
rmnhg said:
? What do you mean?
Click to expand...
Click to collapse
I don't know. I can wait until someone makes a rom for it
Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!
ramitjames said:
Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!
Click to expand...
Click to collapse
I've started to port kernel on https://github.com/Sony-Yukon/android_kernel_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM
rmnhg said:
I've started to port kernel on https://GitHub.com/Sony-Yukon/android_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM
Click to expand...
Click to collapse
Awesome!! Thank you...
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.
btdat2506 said:
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.
Click to expand...
Click to collapse
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Here
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Is there anything else you need?
btdat2506 said:
Here
Click to expand...
Click to collapse
Ok, that's the info I wanted.
Thank you.
btdat2506 said:
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?
Click to expand...
Click to collapse
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
btdat2506 said:
Is there anything else you need?
Click to expand...
Click to collapse
Right now no, but maybe later I need more.
Thanks for helping
rmnhg said:
Ok, that's the info I wanted.
Thank you.
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
Right now no, but maybe later I need more.
Thanks for helping
Click to expand...
Click to collapse
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?
btdat2506 said:
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?
Click to expand...
Click to collapse
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.
rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Mine is d5102 as well.
Here are the screenshots.
Thanx.
rmnhg said:
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.
Click to expand...
Click to collapse
How's it going? Is it ok?
btdat2506 said:
How's it going? Is it ok?
Click to expand...
Click to collapse
I've not ported some drivers yet, this weekend I'll try to finish kernel.
EDIT: I will wait to start Christmas to continue the work because I'm a bit busy these days, I'm sorry.
Hello to all devs, since I can't mount system rw, so I want to flash Android 9 on my OP 7t.
Can anyone plz guide if I can flash OP 7 firmware on 7t?
vyaskd said:
Hello to all devs, since I can't mount system rw, so I want to flash Android 9 on my OP 7t.
Can anyone plz guide if I can flash OP 7 firmware on 7t?
Click to expand...
Click to collapse
I see you are looking for a brick....
You can't.
Sent from my OnePlus7TPro using XDA Labs
you can flash a android 9 gsi xd
ChrisFeiveel84 said:
you can flash a android 9 gsi xd
Click to expand...
Click to collapse
Plz tell in details or any thread link?
lol what do you want with android 9 on the oneplus 7t? Android 10 runs great
we just need twrp or a way to modify system
ecompton59 said:
we just need twrp or a way to modify system
Click to expand...
Click to collapse
1. Maybe in the far future
2. Will never happen
Sent from my OnePlus7TPro using XDA Labs
Android 10's twrp is being worked on guy who made it has less time new baby but everyone who can is working on it and twrp lets you modify system with built in file manager
ecompton59 said:
Android 10's twrp is being worked on guy who made it has less time new baby but everyone who can is working on it and twrp lets you modify system with built in file manager
Click to expand...
Click to collapse
Can u plz share the link of twrp for op 7t?
Perhaps u haven't read op ?
ecompton59 said:
Android 10's twrp is being worked on guy who made it has less time new baby but everyone who can is working on it and twrp lets you modify system with built in file manager
Click to expand...
Click to collapse
Still won't happen, it's impossible to modify /system because of read only partition.
Sent from my OnePlus7TPro using XDA Labs
ive modified my system not scared of bricks i unlocked the tether pcweb apn for my tether hack but twrp may never work again on any phone with Android Q + out the box but devs will find a way we always have
ecompton59 said:
ive modified my system not scared of bricks i unlocked the tether pcweb apn for my tether hack but twrp may never work again on any phone with Android Q + out the box but devs will find a way we always have
Click to expand...
Click to collapse
What kind of modifications u've done in system? Any file delete/replace? If so, thn plz share the process.
Hope u r not talking abt systemless modd with magisk.
heres what im doing but under a test to make sure it works https://forum.xda-developers.com/oneplus-7t/how-to/volte-op7t-t4007085/page4 post 40 why would i use system-less and say that i cant own a phone unless i can modify hotspot to be unseen and this may help understanding root https://source.android.com/devices/bootloader/system-as-root
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
my other idea was to decompress system.img and product.img then put mods in and flash it after making changes
vyaskd said:
Can u plz share the link of twrp for op 7t?
Click to expand...
Click to collapse
It doesn't work, that's what he is saying. No one has twrp working for devices that LAUNCHED with Android 10. Devices with pie or lower have fully functional twrp
ecompton59 said:
heres what im doing but under a test to make sure it works https://forum.xda-developers.com/oneplus-7t/how-to/volte-op7t-t4007085/page4 post 40 why would i use system-less and say that i cant own a phone unless i can modify hotspot to be unseen and this may help understanding root https://source.android.com/devices/bootloader/system-as-root
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
my other idea was to decompress system.img and product.img then put mods in and flash it after making changes
Click to expand...
Click to collapse
Have u done any work on ur other idea about extracting system.img n product.img for modding and compress back to flash?
vyaskd said:
Have u done any work on ur other idea about extracting system.img n product.img for modding and compress back to flash?
Click to expand...
Click to collapse
starting now but had to seen if i could enable the tethering apn in system that sticks and it works great had to prove you can modify system and i did easy as you see in pictures
ecompton59 said:
starting now but had to seen if i could enable the tethering apn in system that sticks and it works great had to prove you can modify system and i did easy as you see in pictures
Click to expand...
Click to collapse
What you are doing is different from actually modifying the system partition, which is what the OP is hinting at.
Sent from my OnePlus7TPro using XDA Labs
no i modified system just a different way because of userspace and ramdisk changes init mounts first way different but thats all i needed to mod in system is hotspot apn but there are ways
Hi,
Does anyone have Chinese Reno 6 PEQM00 firmware
did you find chinese stock rom? can you share it if do
mamomia said:
did you find chinese stock rom? can you share it if do
Click to expand...
Click to collapse
Nope. Still not got Chinese Stock rom
i flashed my oppo to global version, everything is working fine but baseband is null.
is there any help anything regarding that on how to fix that atleast.
phone is not even going in Preloader VCom mode. it just turned on when i connect it to computer with cable.
dont know what to do now
mamomia said:
i flashed my oppo to global version, everything is working fine but baseband is null.
is there any help anything regarding that on how to fix that atleast.
Click to expand...
Click to collapse
How did you flashed. If flashed using sp tool, untick opporeserve2,
cdt_engineering &
md1mg.
And Tell me worked or not
The Gj said:
How did you flashed. If flashed using sp tool, untick opporeserve2,
cdt_engineering &
md1mg.
And Tell me worked or not
Click to expand...
Click to collapse
I flashed it using mtk client from github. I followed a tutorial from xda this one
Flash stock ROM or downgrade ColorOS 12 on OPPO Reno6 5g(CPH2251-MT6877 chip) by using free MTK client GitHub tool.
Hey Guys, After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not...
forum.xda-developers.com
If you are still on chinese rom can you take full backup using this tutorial
https://forum.xda-developers.com/t/...sing-mtk-client-oppo-reno6-5g-mt6877.4406069/
And share that backup with me it would help me.
I unknowingly deleted my backup otherwise i would have used that to restore baseband for GSM module to work. Now im on baseband unknown and imei null.
mamomia said:
I flashed it using mtk client from github. I followed a tutorial from xda this one
Flash stock ROM or downgrade ColorOS 12 on OPPO Reno6 5g(CPH2251-MT6877 chip) by using free MTK client GitHub tool.
Hey Guys, After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not...
forum.xda-developers.com
If you are still on chinese rom can you take full backup using this tutorial
https://forum.xda-developers.com/t/...sing-mtk-client-oppo-reno6-5g-mt6877.4406069/
And share that backup with me it would help me.
I unknowingly deleted my backup otherwise i would have used that to restore baseband for GSM module to work. Now im on baseband unknown and imei null.
Click to expand...
Click to collapse
Remove those 3 files from your rom folder and try flashing using mtk client.
And I am not a Chinese user. (Global)
The Gj said:
Remove those 3 files from your rom folder and try flashing using mtk client.
And I am not a Chinese user. (Global)
Click to expand...
Click to collapse
Even though i flashed with all files first time?
I dnt even have the chinese stock rom now meaning its origional files.
If i flashed without those 3 files it will use previously flashed files which are of global model.
But i will try what you said and will see if it works and get back to you.
There is 1 thing i did find on chinese official site of oppo there are chinese rom available in ColorOS section but only of older models before Reno 4 i thnk.
Yeah
The Gj said:
Yeah
Click to expand...
Click to collapse
I removed those 3 files and now phone is not even turning on.
finally was able to reinstall coloros12(CPH2251) rom using mtk client github.
phone turned on now but still baseband unknown.
mamomia said:
finally was able to reinstall coloros12(CPH2251) rom using mtk client github.
phone turned on now but still baseband unknown.
Click to expand...
Click to collapse
Hey in my pc , mtkclient showing lib-30m error, could you please share drivers and mtkclient files
The Gj said:
Hey in my pc , mtkclient showing lib-30m error, could you please share drivers and mtkclient files
Click to expand...
Click to collapse
Sure I will share tonight its on my other laptop which i dnt have on me right now.
Did u run install script after downloading from github? mtkclient
mamomia said:
Sure I will share tonight its on my other laptop which i dnt have on me right now.
Did u run install script after downloading from github? mtkclient
Click to expand...
Click to collapse
What script. I don't know
The Gj said:
What script. I don't know
Click to expand...
Click to collapse
Read the readme file on github repo its stated there
The Gj said:
What script. I don't know
Click to expand...
Click to collapse
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
mamomia said:
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
Click to expand...
Click to collapse
Any drivers required or not
mamomia said:
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
Click to expand...
Click to collapse
You are on which version of coloros