Related
OK.. Folks... after all the hard time i am facing with my unit. And all the love and care i spend on my BA. I came to the conclusion that the problem with the "No Sound" issues is link to the bluetooth.
What happened to the "No Sound" issue is that when making/receiving a call, the unit will try to connect to the BlueTooth Handfree profile (even if the Bluetooth is turn off!!!!). So, when this happens, the speaker and mic is disable because the unit "thinks" is connected to the Bluetooth Handfree profile.
Some user suggested that when the "no sound" issues occur, you can either soft reest or you can turn on/off your bluetooth and that will cure the problem for a while units it happens again.
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Procedures:
On root "Windows/StartUp" remove the file "Run_BTTrayCE" (same it somewhere else) then reset your unit.
Once the unit is reset, the bluetooth will not load on startup, that means the bluetooth is disable.
if you want your bluetooth to run again. you can either place the "Run_BTTrayCE" back on "Windows/StartUp" or to run the "BTTrayCE" in the Windows dir.
I hope some experts here can take this advice and see if they have any clue with what's going on..
BTW: Upgrading Radio Rom, or Bluetooth stack will not do anything so pls. don't waste your time on it.
I hope i have helped someone out there who is piss with this problem.
Derek
HappyGoat EDIT: I took a typo out of the title so it reads better, hope you don't mind...
Hey there!
I like your solution but I personally think it might be a bit overkill! I used to use the Bluetooth all the time on my XDAII but on my XDAIIs I only use it for my bluetooth GPS. I am going to try deleting the profile for my Bluetooth headset and see if that makes any difference (seen as I don't use it because the sound quality is terrible).
I'll post back with results!
Dom
@Derek, pls find my comment here: http://forum.xda-developers.com/viewtopic.php?p=118412#118412
Still dont work even take away the file!
Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset
"No sound no voice " problem still exist
Should i just delete the file entirely instead of just cut and paste it some where?
I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?
Please help this problem make me sick for almost 5 days already
Umm, creamcream, there is no reason to worry. In the worst case scenario where you lose the file, you can just re-flash your rom, or ask another forum member to send you the file. I would gladly do so.
creamcream: Is your bluetooth disabled? And, if so, you are still experiencing the no-sound problem? Because if you are, then you have discredited this theory.
thanks the lastone
Hi, i solve the problem at this time
I just want to knwo how u update 1.40 rom?
is it stable?
Official?
I am worry that if that is not official it will be very dangerous for my Xda IIS
by the way is it fit for all model
such as
sx 66, ppc 6600 and Xda IIs
is it simple to do so?
can i have the link where to download thankyou "thelastone"
If you are planning on upgrading your rom to the current highest version, 1.40.00, then I recommend you check out wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
If you do it properly, it is perfectly safe.
Re: Still dont work even take away the file!
creamcream said:
Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset
"No sound no voice " problem still exist
Should i just delete the file entirely instead of just cut and paste it some where?
I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?
Please help this problem make me sick for almost 5 days already
Click to expand...
Click to collapse
Hi Creamcream
I just want to know when you move "Run_BTTrayCE" to your SD Card and follow by a soft reset. When you unit boots up, do you see the BT icon on the bottom right hand corner? If the icon is still there, that mean you haven't successfully disable your Bluetooth from startup.
Also, the other way to try it is try running your bluetooth manager. if your bluetooth is turn off, it will give you a errors message saying your Bluetooth fail to turn on.. somthing like that.
Pls let me know your result....
Derek
rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure
stachoo said:
rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure
Click to expand...
Click to collapse
@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.
It has been almost 24 hrs since I disabled the hands free service... and I did about 5 calls, and until now I havnt experienced any "no sound" problem...I hope this is it!!!! Thanks!!! :lol:
GUYS
what about this problem :
The bluetooth turns off when you power off the screen ??
My findings so far:
If I keep Bletooth on all the time "nosound" never happens. At least not for about a week and did no softresets. However after some time something brakes regarding bletooth serial. The GPS thinks it´s online but nothing gets through. Closing and opening the serial port cures it momentarily. (This was with handfree services enabled). This never happend when I toogled Bluetooth on/off regulary.
Tried the trick to disable handsfree service yesterday but without unchecking "use handsfree for telephone calls". With Bluetooth turned off tonight the nosound reappeared, so just disable the main handfree service is not enough.
Have now also unchecked "use handsfree for telephone calls" and will report back if nosound occurs again.
(To the guy whos Bluetooth turns off: You probably have an old sw version where our nosound problem had not been introduced yet. 1.12.00 or soo...)
2 phat said:
stachoo said:
rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure
Click to expand...
Click to collapse
@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.
Click to expand...
Click to collapse
Disabled BT handfree and unchecked "Telephone calls" yesterday but unfortunately the nosound bug hit anyway tonight.
The idea to disable the handsfree service was a nice one but no, it did not prevent the nosound bug to strike!
Back to my own solution that sofar has prevented the nosound bug: Keep Blutooth on all the time.
i have tested all this but the only thing that wrked was...
right guys I have been reading and trying but the only thing thats worked for ME was radio rom upgrade seriously. I have an SPV m2000, i have tried all ROM updates, and at the moment I am on is...
by the way I upgraded to radio version 1.12 but this never solved it so i went back to 1.10 which works,
ROM version: 1.40.00 WWE
ROM date: 03/10/05
radio version: 1.10.00
protocol version:1337.391
ExtROM version:1.31.124
I dont know but i managed to only install what I wanted of this (orange rubbish ext rom)
NOW FOR THE DOWNSIDE MY UNIT USED TO BE SOFT RESETTED EVERYDAY, but now i only reset very very LESS times, its definetly better than before I can vouch for that. BUT WE NEED SOMETHING SOLID.
Product recall????? :lol:
Such problem as creamcream has
I have no sound from speaker (only on incoming call - it rings)
But in all other cases it keeps silence.
Flashing new ROM doesn't helps too.
It didn't helps for me.
Nor Bluetooth disabling, nor Flashing.
You say that you solve that issue.
Sorry - but I don't understand how did you do it?
Answer please -
What to do?
Thanx in advance.
OK, just to say I'm having the same problem for too long time now. No sound on calls nor the other party can hear me.
I've opened another thread:
http://forum.xda-developers.com/viewtopic.php?t=44440
And, like I said there, I'm desperated.
Hello,
I just installed Tomtom7 on my pro2. but now the bluetooth stack is broken.
On other websites they say that tomtom replaces BtCoreIf.dll and BtSdkCE30.dll I already removed them and soft reset, but that doesn't work.
Can someone with a Pro2 upload those 2 files so that i can replace them on my phone? That will be the fastest solution i think... Thanks!
When this happened to me I had to hard reset, then re-install TomTom without the BT files. I'm still not entirely clear what the problem was, though, or how to correct it without hard resetting, but those files seemed to have corrupted something.
had The same problem had to hard reset. teach me to get a pirate version
I'm having the same issue. So removing the files from the cab fixes it?
______________________________________
Watch my full in-depth review of Touch Pro 2
http://www.youtube.com/watch?v=VgTjSbpFDhQ&feature=channel_page
No problems on my site... Using tt7.915
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Corell said:
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Click to expand...
Click to collapse
Runing gr8 with internal GPS
Roberto79 said:
Runing gr8 with internal GPS
Click to expand...
Click to collapse
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Roberto79 said:
No problems on my site... Using tt7.915
Click to expand...
Click to collapse
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
RMU said:
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
Hmm dont have any of posted problems looks like i was just lucky lol but maybe that somthing jumps up later when i'll "really need it"...
Corell said:
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Click to expand...
Click to collapse
Its the latest release of tomtom7 so it has to work at least a bit older version works gr8 on my TP2, resolution is superb. I have tryed Amigo but it didnt work even with multi resolution .gro file
RMU said:
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
now i see that is not a tomtom problem, because i've hard reset my pro2 and not yet installed tomtom, so i've made another thread for this.
but the bluetooth problem is still there when i install tomtom
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
It seems to be. It corrupts the files.
_________________________________________________
Check out my full in-depth videoreview of the Touch Pro2: http://www.fuzemobility.com/excellent-htc-touch-pro-ii-video-review/
dicko99 said:
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
Click to expand...
Click to collapse
Uninstalling tomtom does not help for me.
The files are replaced on the device so a hard reset is the easiest way back.
TT 7.910.9185 is running fine on mine, I did have the same issue with another version of TT7 though, but simply hard reset to recover and started again.
I think (although have not verified) that the BT Stack on the Rhodium has been updated to a Broadcom stack.
Can confirm that the above version works fine, great resolution and no issues using BT after install and with the new BT Stack you can now route all audio from the Rhodium through your hands free / car kit
Cheers,
Beasty
I did have a problem with v7.915.9196 where the device bootup was delayed by about a minute and a half (from 1m20 to about 3m from cold to starting Mobile Shell) which I had to get around by not installing the TomTom BT files.
I used TT7_915.9196_VGA__Negro.cab which does not appear to have the bluetooth files in it.
and this version could also be purchased on tomtom with ur chosen map on an sd-card? just to avoid having to hard reset and stuff after trying to install
thx.
I removed the bluetooth files from the cab with WinCE CAB Manager and installed tomtom agian, now everything works fine.
I'm now using tomtom version 7.450.9028 , i think it will work with other versions to
Thanks!
wonderful, great info now i have one less thing to worry about when my TP2 gets here thanks dude!
EDIT.: Pardon the perhaps n00b question, but i get an error while trying to run the .exe. is it meant for running on the phone or on the pc? i use winxp
All;
I've tried several ROMs (including my stock one for my Tilt 2) and I still can't seem to get my phone to work correctly with my car. The phone will dial, connect for about 2 minutes, then the sound will stop coming from my car and go back to the phone. It still says the call is connected from the car, but no more sound and the phone won't reconnect by telling it to use hands-free. It also takes a good minute or so to kill the connection when I hit end on my car.
Any ideas/tweaks/registry hacks you guys can think of? I looked at the MS site for registry changes and those only messed up the phone My car worked fine with other phones and my phone will work fine with other bluetooth devices (headsets, other cars, computer, etc), its just this unholy union seems to be causing problems. I've tried bitpool changes, profile tweaks, etc to no avail. The car manufacturer says my phone 'should' work, but of course, they won't troubleshoot it...
Thanks!
J
Have the same problem with my volvo carkit. Manual switching off the data connection in con.man. may solve your problem temporaly. Bluetooth on HTC really sucks......
same here with vw premium phone with touch adapter and rns 510 all new but not able to connect with my tp2 all other phones work can somebody produce a solution i am happy to donate for it
Dunno if this helps, but I have a TomTom GO 750 and connect to it with the TP2 for handsfree. Im running stock wm6.5
Most of the time its OK. Occasionally the phone wont allow connections, so I have to disable/re-enable Bluetooth on the phone and all is good.
Also, sometimes, every 25 secs or so there is a beep while on a call. Kinda weird. But acceptable.
Well, at least it's not just me
Is there anyway we can change out bluetooth stacks or 'downgrade' the Bluetooth version through software/registry hack? I don't need any fancy bluetooth features, I would just really like my car to work with it!
I'll try the data connection and see, but you're right, not really a long-term fix. Thanks for the idea, I think I tried everything else and option in the gui...
looking-g said:
same here with vw premium phone with touch adapter and rns 510 all new but not able to connect with my tp2 all other phones work can somebody produce a solution i am happy to donate for it
Click to expand...
Click to collapse
I had this same issue where it wouldn't connect. What it ended up being was mis-matched bluetooth names in the various places. Check your bluetooth configuration as well as any tweak programs that may allow bluetooth tweaks, mine were set differently and freaked my car out.
Had the same issues: connection seems fine, but most of the time no sound at all.
I tried different solutions found on different websites, but for me, this one fixed all my bluetooth issues: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
I applied the registry settings (not all reg keys mentioned did exist on my phone), re-paired (renault built-in carkit), and bluetooth is working fine now.
Similar Problems on GM
I wonder if we are having problems stemming from the same root cause or multiple root causes.
Regardless, I'm having similar problems on a 2009 GMC Yukon with built in Bluetooth. The phone is connected and rings through the auto, but when I hit the off hook to answer, I get no sound and the caller gets no sound. It appears everything connects and the phone says the call is connected, but no good. Usually if I initiate the call from the phone it will work correctly and sometimes not.
I solve it be deleting the phone from the car and the car from the phone and re-pairing, but it only works well for a short while then it fails again.
I'm hoping someone comes up with a great solution(s).
farhope said:
Have the same problem with my volvo carkit. Manual switching off the data connection in con.man. may solve your problem temporaly. Bluetooth on HTC really sucks......
Click to expand...
Click to collapse
Well I'll be... That is what fixed it! Well, not really a fix as I have to disable my data, but actually makes it usable.
Do you know if there is an app out there for this? NoData, while great, doesn't shut down the connection. There is a donation if someone will write one for me
aert said:
Had the same issues: connection seems fine, but most of the time no sound at all.
I tried different solutions found on different websites, but for me, this one fixed all my bluetooth issues: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
I applied the registry settings (not all reg keys mentioned did exist on my phone), re-paired (renault built-in carkit), and bluetooth is working fine now.
Click to expand...
Click to collapse
Did you create the missing keys/folders or just make changes to the keys you had?
I'm willing to try anything to not have to disable my data everytime I want my phone to work! Yes, I'm that lazy to expect things to work right the first time
All right! Got it fixed, thanks guys.
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
3. Reboot device
I tested it for a few minutes and it was solid and sounded good, no freaky occurances. We should sticky these for other people having BT issues...
Credit to EverythingWM and aert for the pointers!
thats good news loki but some values i can not find in my registry i will try to add them and then give it a go
looking-g said:
thats good news loki but some values i can not find in my registry i will try to add them and then give it a go
Click to expand...
Click to collapse
Yes, I added the missing ones, restarted the phone, re-paired with my car and, so far, works great. I'll give it a week before I start doing the happy dance.
is it possible to make a cab or reg key file for it
I can create a reg for all the keys except the HFBDA key. That should match the LastConnectedBDA key which may be different on our phones. What is yours set to? Mine is 00,1e,ae,20,c2,80. I wouldn't want to have someone import it when the setting isn't right for their particular build/version/etc.
Loki007 said:
All right! Got it fixed, thanks guys.
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
3. Reboot device
I tested it for a few minutes and it was solid and sounded good, no freaky occurances. We should sticky these for other people having BT issues...
Credit to EverythingWM and aert for the pointers!
Click to expand...
Click to collapse
Could anyone explain what these settings mean? There is no point of tweakin something if I do not know what each of setting does, well of course it has a point of tweaking it, but I would really like to know what it means. Does anyone has a problem syncing the phonebook after aplying that tweak or it is just me?
Thanks for help!
Can someone explain what all of these REG changes do?? I dont want to end up like before. There was a CAB floating around that was supposed to fix the BT issues and while it made it better it drained my battery VERY VERY quick.
Do these changes have any effect on battery life???
aert said:
Had the same issues: connection seems fine, but most of the time no sound at all.
I tried different solutions found on different websites, but for me, this one fixed all my bluetooth issues: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
I applied the registry settings (not all reg keys mentioned did exist on my phone), re-paired (renault built-in carkit), and bluetooth is working fine now.
Click to expand...
Click to collapse
WOW.. now when my TP2 rings, I actually get the custom RINGTONE out of my GARMIN NUVI SPEAKERPHONE and it doesnt DROP calls right after the first ring AND I can answer and hangup fine.. the phone book is still a little messed up in that any contact with ONLY a COMPANY NAME and not a first and last name loads as a phone number in the name field...
Does anyone know if any of these REG changes degrade battery life? I am asking because a while back I had a CAB that was supposed to fix the bluetooth and while it improved the paring, it drained my battery live very very fast.
Also can someone explain WHAT these reg changes and additions do? I would really like to know what I am doing to fix the issue...
-- Dave
One more thing, now with the fix, it appears on my garmin, when I press LAST DIALER, LAST RECEIVED or MISSED, I get NO DATA AVAILABLE .. I didnt have this problem before the fix.. Is there a solution??
Thanks....
Loki007 said:
I can create a reg for all the keys except the HFBDA key. That should match the LastConnectedBDA key which may be different on our phones. What is yours set to? Mine is 00,1e,ae,20,c2,80. I wouldn't want to have someone import it when the setting isn't right for their particular build/version/etc.
Click to expand...
Click to collapse
correct; mine is different from that.
also, the bdaddr key keeps resetting itself when I reboot my phone.
I even tried changing the key type to something other than binary, and it still reset itself to binary, and changed back tot he default value.
These hacks did not work at all.
I came across this cab that changes some BT settings, but at least one guy reported it draining the battery very quickly (not enough posts to post links...sheesh):
forum.ppcgeeks.com/showthread.php?t=90155&highlight=bluetooth
hi i've just bought the htc desire and need advice on apps, whats the best free apps for the following
1. skype
2. sky + remote record
also i would like speak to text to work for texts but dont no how to do it
For Skype, I use Fring or Nimbuzz
For Sky+ it looks like you'll have to pay, either £2.89 for Record It or £1.43 for Remote Recorder
Everything you need for voice input is here: http://forum.xda-developers.com/showthread.php?t=663608
Remote recorder has a free trial version.
thanks i cant pay for apps, i followed the link and can use voice search but dnt know how to use voice to text for texts, sorry for the dum questions
Did you install the tweaked keyboard? When you're in a text entry field you just hit the mic.
Aitese said:
Did you install the tweaked keyboard? When you're in a text entry field you just hit the mic.
Click to expand...
Click to collapse
i installed the kb but theres no mic
whats the easyist way to disable data connections, i know about the power button but thought there may be a widget to stop my phone downloading data when i done need it too
Did you install the tweaked keyboard? When you're in a text entry field you just hit the mic.
Click to expand...
Click to collapse
i installed the kb but theres no mic
Click to expand...
Click to collapse
after you installed keyboard did you go into menu - settings - language & keyboard and enable HTC_IME?
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
i got the kb workin
PAULRYAN52 said:
i got the kb workin
Click to expand...
Click to collapse
did you get the voice to txt working?
I just installed Jonas's keyboard and all works fine but if I click on the mic button nothing seems to happen. If I hold down the mic button it shows the settings symbol and when you release it, it goes to settings.....
PAULRYAN52 said:
whats the easyist way to disable data connections, i know about the power button but thought there may be a widget to stop my phone downloading data when i done need it too
Click to expand...
Click to collapse
There's a widget for that. If you go to add a widget, look for SETTINGS - in there you'll find one for mobile network.
Bandare said:
did you get the voice to txt working?
I just installed Jonas's keyboard and all works fine but if I click on the mic button nothing seems to happen. If I hold down the mic button it shows the settings symbol and when you release it, it goes to settings.....
Click to expand...
Click to collapse
my voice to txt works fine, are you connected to the internet as i believe you need to be for it too work, also did you install the voice search thing
Bandare said:
There's a widget for that. If you go to add a widget, look for SETTINGS - in there you'll find one for mobile network.
Click to expand...
Click to collapse
thanks never knew about that, it works great
A little help required guys...
When I turn bluetooth on & make it DISCOVERABLE, there is a timer which makes it DISCOVERABLE for only 120seconds... How can I make it DISCOVERABLE without timer 4 as long as I want to... (bcaz when I want 2 use my bluettooth headset I want this 2 stay DISCOVERABLE) or is there something I m missing...
Thanks in advance...
K7
K 7 said:
A little help required guys...
When I turn bluetooth on & make it DISCOVERABLE, there is a timer which makes it DISCOVERABLE for only 120seconds... How can I make it DISCOVERABLE without timer 4 as long as I want to... (bcaz when I want 2 use my bluettooth headset I want this 2 stay DISCOVERABLE) or is there something I m missing...
Thanks in advance...
K7
Click to expand...
Click to collapse
You DON'T want your phone discoverable permanently. For what you said you want to do, use a headset, you don't need it to be. Once you're paired that's it.
Hello,
I just bought a G3, and I can not synchronize the contacts with the Metavoice bluetooth kit installed on my Volkswagen Golf. I've never had any problem with the previous iPhone and Galaxy S3 and S4. Anyone have some ideas to solve the problem?
Thank you,
Fulvio
Solved.
Fulvio_61 said:
Solved.
Click to expand...
Click to collapse
OK I have the same issue please tell me what the fix was
jmrenshaw said:
OK I have the same issue please tell me what the fix was
Click to expand...
Click to collapse
Hi,
sorry for the delay in the response. When I tried to synchronize the address book, I did it with the phone in my pocket, using the buttons on steering wheel of the car. That way I did not realize that the first time he gets this operation, the device asks for permission to download, and not receiving it then refused the operation!
Hope this helps.
Fulvio.
Fulvio_61 said:
Hi,
sorry for the delay in the response. When I tried to synchronize the address book, I did it with the phone in my pocket, using the buttons on steering wheel of the car. That way I did not realize that the first time he gets this operation, the device asks for permission to download, and not receiving it then refused the operation!
Hope this helps.
Fulvio.
Click to expand...
Click to collapse
Rats mine has never asked for permission.
Thanks for the reply though.