Hello there,
I am looking for a new Headphone Jack since I only receive sound on one ear only. Seems to be the only thing you can't buy on the internet....
I had the soldering problem as well and fixed it a month ago, worked good so far. Now I can only listen to it on one ear. I've rechecked all soldering points and it's still not working. I guess it's broken.:crying:
So has anybody found the Headphone Jack anywhere or a fitting part from another model?
Just solder the dry joints. Read some threads here.
thundermuppet said:
Just solder the dry joints. Read some threads here.
Click to expand...
Click to collapse
Have you read the whole post or just the title?
Whoops sorry, my fault. I just read first paragraph..
Personally, I would still try to re solder again. Problem is, add you know is the very small distance between the joints.
thundermuppet said:
Whoops sorry, my fault. I just read first paragraph..
Personally, I would still try to re solder again. Problem is, add you know is the very small distance between the joints.
Click to expand...
Click to collapse
No problem
Well, I have resoldered every one of them again, just to make sure
Try this, http://m.aliexpress.com/item/32480030576.html I can't make out on my phone off it's speaker or headphone jack.
Have seen this offer, yep. But it looks definitely like a speaker
Related
If anyone can find me a vibrator motor for the dash, that would be great. mine seems to have died and my phone is not under warranty since march. please!
Thats what my GF said, but I knew better!
Sorry couldnt resist.
inb4 Spam war.
are you shure the problem is the motor, cause the cable is really fragile, mine get cut every time i open my phone.
is there a picutre of what this thing looks like? so if i decide to take it apart, i know what it looks like?
torade said:
are you shure the problem is the motor, cause the cable is really fragile, mine get cut every time i open my phone.
Click to expand...
Click to collapse
was their an easy fix to fix the cut wire? you just solder it back together?
.animal said:
is there a picutre of what this thing looks like? so if i decide to take it apart, i know what it looks like?
Click to expand...
Click to collapse
I dont have any picture, but, when you take apart your phone, the only cable that conects the back part is the one for the vibrator and this is what always get cut on the end (close to the circuit)
There´s no need to solder anything, the connection is similar to the phone line or net cable, joust have to take apart the connector pulling from the ends. its one connector for each cable, so you have to pull from each point at a time.
is this the vibrator motor i need?
http://cgi.ebay.com/HTC-DASH-S620-S...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That's it. I had the wires from mine pull out of the little plug so I replaced the whole thing.
So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.
brycestejskal said:
So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.
Click to expand...
Click to collapse
It's a common issue with these phones. I went through the same thing you did, ended up replacing the jack multiple times to no avail. Eventually just cashed in on my phone insurance and had them send me a new one. As far as I could find, no one was able to resolve the issue once it began happening, but it would gradually get worse.
Sorry to be the bearer of bad news, but I'd hate for you to chase your tail around as I did. Temporary fix is putting pressure from the front of the phone to the back in a pinch fashion about where the headphone jack is. Goodluck!
Try using a hair dryer on it for a few minutes (medium to no heat with a fast sweeping motion... not concentrating the air on it 100% of the time). There may be some moisture in the connection that might be messing with it (happened a few times with my portable devices and it helped all the time).
brycestejskal said:
So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.
Click to expand...
Click to collapse
I have fixed tons of these on our phones. Common issue. That part is like 5 bucks the you need to replace. Taking the phone apart to do so, its pretty simple. on a scale of 1-10 10 being hardest i give it a 3. I can assure you wont void warranty because there's nothing to void, lol. If you need help advice or want me to do it for ya, send me a message.
nidnarb said:
I have fixed tons of these on our phones. Common issue. That part is like 5 bucks the you need to replace. Taking the phone apart to do so, its pretty simple. on a scale of 1-10 10 being hardest i give it a 3. I can assure you wont void warranty because there's nothing to void, lol. If you need help advice or want me to do it for ya, send me a message.
Click to expand...
Click to collapse
What is the part you are referring too? I have already replaced The headphone jack and it did not fix it.
If you replaced the internal jack. Then 1 you ordered a defective one or 2 your main board is fried. If you bought the part from China its probably bad. Edit: did you actually replace the headphones yet?
Sent from my SGH-I317 using Tapatalk
nidnarb said:
If you replaced the internal jack. Then 1 you ordered a defective one or 2 your main board is fried. If you bought the part from China its probably bad. Edit: did you actually replace the headphones yet?
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I ordered it from a US seller. And yes the headphones were the first thing I replaced. The headphone circuitry must be fried. Oh well. Thanks for the help guys.
Did you clean the area with 99% alcohol?
Sent from my SGH-I317 using Tapatalk
The 3.5mm jack on my Elephone P8000 has already stopped working properly after only one day. It just stopped working in one ear and I tried wiggling the 3.5mm plug it a bit to see if that would bring the sound in both ears back and I felt something click a little when I tried pushing the plug down, it sounded like I pushed something further down. The wiggling helped for like one second but after that tiny click, I couldn't bring the sound back in both ears. When I do wiggle the 3.5mm plug, the sound gets louder in the ear that it already works in.
hello unfortunately have the same problem I am communicating with my salesperson , I hope you can help
same thing here, due to bad soldering, fixed it by soldering it myself
+1 also. I couldn't see where it needed soldering. Glass is coming off as well. probably can't send it back because I opened it. Would be too much hassle anyway. But that's the risk when not purchasing from a bricks and mortar shop..
her0yne said:
same thing here, due to bad soldering, fixed it by soldering it myself
Click to expand...
Click to collapse
Can you tell me where you soldered it exactly? I soldered it too. It improved the overall sound but it is still only on one ear.
I have the same problem. Could someone make a tuturial to fix this problem?
http://bbs.elephone.hk/thread-8206-2-1.html
a little fix-tut ... for me too complicate
Hey people, I was wondering if anyone has had the faulty headphones issue. After a few days, my headphones stopped working properly, there was a lot of static and they need to be pushed and held towards the screen to function again. This is going on with 3 pairs so it's a phone fault.Maybe all the tech savvy experts here can chime in and propose something.
Thanks!
I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.
shadowseed said:
I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.
Click to expand...
Click to collapse
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar
therealtry said:
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar
Click to expand...
Click to collapse
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.
shadowseed said:
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.
Click to expand...
Click to collapse
Hey shadowseed,
I took it to a couple of guys in downtown Athens and none said they wanna take a look at an Elephone. And these were techie Asian guys lol. Let me know if you find anything via pm or through here. Thanks. I'll keep looking myself otherwise I'll buy bluetooth headphones.
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Put some solder on every point now. That fixed the problems for me, looked like there was no solder there.
Same on my phone >.< seems that the headphone jack has been horribly designed/built then!
The design is excellent, but there are multiple points with no solder on top, just glued or something. That can obviously not work in the long term.. The fix is very easy if you have a soldering iron, you don't need precision tools.
Hello
I have the same problem. I've bought it a few days ago (it has not one month).
What can I do? This phone is warranted?
Thanks,
Diego
shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Could you please give us a detailed tutorial on how to open up the elephone?
I've tried it today (got the same problem) and failed on removing the white case from the fingerprint scanner.
You can see here: KlickKlack
I've tried soldering the points today and the connection seems more stable for now.
No more bzzing in idle when using headphones (Teufel Aureol), but the quality still sounds like some bad compressed mp3.
Pushing the plug (display frontfacing) to the back left seems to fix the problem.
I've tried putting cardboard between the 3.5mm port and the casing of the phone but no luck.
When using in-ears (some cheap philips) there is still a semi-loud bzzing in the backgroud and since the cable goes sideways there is no way of getting a stable connction.
Did I do faulty soldering or might I've broken the port with the soldering iron?
puu(.)sh/ltJDW/ea70467ca2.JPG - Image 1 (Note: I already resolded the point that seems unstable.)
puu(.)sh/ltJNx/08d0ead27a.JPG - Image 2
shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Thanks!!!
i'm in the business too, since two days, bought a bt dongle, with eragon rom no bad sound issue, but the asycronious in videos of sound and lips movement is bad, so i have to solder...i need an iron, tomorrow i will try, i hope i will fix it. what about warranty??
thanks for the solutions
I don't care much for warranty on a china phone...
I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?
schakalakka said:
I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?
Click to expand...
Click to collapse
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?
Romeo76 said:
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?
Click to expand...
Click to collapse
Unfortunately it is still the same.
Well looks like im sticking to bluetooth headphones, was hoping someone would confirm the soldering would fix it.
Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks
nnila said:
Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks
Click to expand...
Click to collapse
First of all don't buy any other headphones try to lend headphones from friend or family that are working and they can confirm they're work...
next try to clean headphone jack with isopropylealcohol like in this video (before cleaning just pull out battery just for safety, after cleaning give it some time to dry out, it's really important)
https://www.youtube.com/watch?v=hZL9MFKJQec
and test it and you'll see, if there will be still same problem your jack connector is gone and need repair