i recently stepped on my G2 and sent it in to tmobile. It was rooted running CM7. im not completely sure but is the old way (visionary temp root, then some files, some commands, then perm root through visionary) still working with new G2's? im getting my new one soon and want to be able to root it the hour i get it. I have little or no experience with ADB but I can pick up on things fast if someone is willing to guide me through it.
I am not responsible if this bricks your phone but it did work fine for me.
It takes much less than an hour to complete and is very easy to do.
Uses an updated visionary plus so there is no longer a need for inputting commands.
1) go the the android market search for and download Astro File Manger. The free version will work fine.
2) Download the file I have attached. Credit to modaco.
3) Plug your phone into your computer via the usb cable and put the file you just downloaded onto the sd card not any sub folder.
4) On your phone go to settings > application and check the bo off that reads unknown sources.
5) Go to the Astro app the home button should take you to the SD card. Browse through the list and find com.modaco.visionaryplus.r14.apk click the file and then click open app manager. Follow the on screen instructions.
6) go to the visionary plus app (its a yellow triangle) and press temproot now. Wait for it to finish.
7) once temp root is finished (if visionary exited go back to the app) and now press attempt perm root now. This may take several minutes and once your phone reboots you will have a rooted g2.
I'd recommend this guide: http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision
theSpam said:
I'd recommend this guide: http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision
Click to expand...
Click to collapse
More specifically on that page...
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2
Ive been through alsorts of the posts all the guides i can find, even ones that say they are for unrooted phones and all of them fail.
Does anyone know if there is acutaly any way that works to get the USB functions to work again?
all the guides ive found need to copy the files to the phone, which cant be done on a none rooted phone because you cant enable SU to move the files.
There must be some way of fixing this.
Tools i have
a windows PC
a linux Laptop
a working rooted desire
and a USB bricked none rooted desire
Have you read this?
To use this tutorial you should already have some skills, anyway, here's my translation:
1. Turn on your Desire holding Back+Power buttons, you will enter Fastboot (drivers should be installed).
2. Download fastboot.zip from here , unzip and execute sdcard_repair.cmd from fastboot folder.
3. Press reboot on your device and wait for it to be fully loaded.
4. In Android Market search for Android Terminal and install it.
5. Search for z4root (it doesn't support Desire but it will give you temporary root (until you reboot your device)).
6. Go to here , read it carefully, download files, necessarily edit the CID in mtd0.img,
put in SDCARD root folder (using cardreader or via internet, cos it's USB Brick )
7. Launch z4root, choose temporary root, close it.
8. Launch Android Terminal, write in it su, agree with root rights and now follow the usual UnBrick process. (for ex. this (use translator)).
9. Reboot.
well im getting somewhere now, usb functions are working again, sadly not getting anywhere with http://unrevoked.com/ just isnt seeing my phone, thanks for at least getting usb up again; )
* okay seems the unrevoked problem is my Hboot, currently downgrading it, fingers crossed
Okay, semi-newb here. I've been able to replace the ROM on an Arnova tablet a year ago, and sideloaded Google play on a Polaroid tablet. I've been researching the simplest way to turn my Mom's Kindle Fire V1 into a simple android tablet with access to Google Play. If I can accomplish this, then I'm hoping to repeat the process on my son's Kindle Fire HD. I'd like to load one of the Nexus 7 Roms. Unfortunately, there's a /lot/ of different Nexus ROMs and methods, each with links to other software that I'm trying to understand. Please forgive my questions...
I've downloaded these apps:
-gapps-jb-20130813-signed.zip
-GooManager_2.1.3.apk
-Kindle Fire Utility v0.9.9.zip
-SmoothROM-1.7_otter.zip
-Smirkit.apk
I started at this thread: http://forum.xda-developers.com/showthread.php?t=2265999
Which led me to this thread: http://forum.xda-developers.com/showthread.php?t=2103278
"Installation
-Make sure you have the latest TWRP"
Is this in the goomanager file? I downloaded from this link, http://forum.xda-developers.com/showthread.php?t=1592681, but I don't see the screen that shows up in the OP, and I'm not entirely sure what to do with this program.
"-I suggest you make a backup"
Is this what TWRP is for? I've copied all the KF files onto my computer already, but I don't have an .img file. And if I want to reflash with the original files, do I need to create an .img of my existing files, or do I download one from the list of files that I see in the goomanager?
"-Wipe data, cache, system, and dalvik cache"
Do I use one of these files to do this, or do I go into the KF settings to do this?
-Install ROM
Do I just copy the boot.img over to the root directory of the KF. I recall doing this for the Arnova.
-Install the latest gapps for CM10.1.x
Again, do I use one of these programs to do so, or copy files over (side-load)? I don't see .apk files in this package
-Reboot
I think I can do this one.
Again, sorry for being a newb...I just want to make sure I'm doing everything right. Haven't bricked a tablet yet, but I've probably just been lucky so far.
Thanks in advance. (Oh, do I need the fastboot cable for any of this? Is it recommended to get one just in case?)
Ok lemme get to things straight, this is the kfhd forum, if you have a kindle fire 1 then this is technically the wrong forum but i will point you in the right direction becasue theres some things you need to understand. First off the kindle fire 1 is very very easy to do what you want to do to it. Basically you download kindle fire utility and it will root and install whatever recovery you want onto it and from there you grab rom's from the kindle fire 1's development section and you can flash them with the corresponding gapps.
Here's where the important thing is, if you want to do this to a hd model it isnt the same process, if you attempt to use kindle fire utility on a hd model you are likely to hard brick it because the hd has a locked bootloader. The hd has a simple enough method to flash it though, as long its not the 2013 model you can install roms on it, theres a tutorial for installing with fireflash that i think is the easiest method as long as you make sure to downgrade the bootloader, somehow people tend to miss the checkbox for it.
If you mention which hd you have i cna link you to the tutorial for it but i don't wanna send you the wrong one even though there really isnt much of a difference since its the same program and inlcudes the files in teh apk.
Now to answer some questions:
First off the backup in twrp is useful yes, but only if you have twrp installed, lets say something happens and you no longer can access recovery and are forced to use fastboot, in that case you would need the image files that you mentioned, those images can be downloaded off the internet or you can jsut backup up your kindle and use those images.
Second: The wipe options are in twrp once you have it working
Third: You don't copy the boot.img over, you hit install in twrp and select the zip file that is the rom and tell it to flash.
Fourth: do as said in previous step, just do it after you flash teh rom though.
and finally yes its kinda recommended to have a fastboot cable, though i am one to talk since i don't have one but i have the means to make one at any time. Hope this helps!
Also thought i'd mention if it turned out to be a kindle fire 2 that its process is similar to the hd's so dont use kindle fire utility on it either. You can always check software version that it has installed an i can tell you for sure what model it is.
I have 4.6.4 AT&T OS and I want to downgrade to 4.6.3 unlock OS. In recovery mode the phone is connected with computer, I see serial number and "sideload" next, the update.bin file is in ADB folder, but at next step I get the message
"cannot read update.bin" . I run Win 10 on computer, I try also on Win 7, same problem. I downloaded
4.6.3 unlock OS first with Microsoft Edge, it has .zip extension, then downloaded with Chrome it came with .bin extension, neither one work. Any ideas ? Because I ran out.
That sounds confusing and frustrating. Where did you get the .bin from? I downloaded the one linked in this post and had no problems: http://forum.xda-developers.com/showpost.php?p=62768812&postcount=2
You definitely want a .bin file, not a zip (the .bin should be around 1.2gb). There's also the distinct possibility that ADB is improperly installed. If that's the case, there should be more info in that link that will help you.
In my signature, I link to a walkthrough describing everything I did to get my phone downgraded, rooted, etc. Maybe take a look and see if you missed any steps.
munkymack said:
That sounds confusing and frustrating. Where did you get the .bin from? I downloaded the one linked in this post and had no problems: http://forum.xda-developers.com/showpost.php?p=62768812&postcount=2
You definitely want a .bin file, not a zip (the .bin should be around 1.2gb). There's also the distinct possibility that ADB is improperly installed. If that's the case, there should be more info in that link that will help you.
In my signature, I link to a walkthrough describing everything I did to get my phone downgraded, rooted, etc. Maybe take a look and see if you missed any steps.
Click to expand...
Click to collapse
I downloaded 4.6.3 OS from 3-4 diffrent links from forum including that in your post, also direct from amazon. With Microsoft Edge, Internet Explorer the file is downloaded with .zip, no matter the link I used, so I thought that's the problem so I used Mozzila and Chrome, it came with .bin extension. The .bin file seems to be ok, I can open and extract folders and files from it with WinRAR so it's not corrupt.
About ADB, I read before how to deal with it, seems to work correctly, I can connect the phone in windows with phone on, also in recovery mode the phone appear sideload like it should. So at this point I don't no what to do.
markmm said:
I have 4.6.4 AT&T OS and I want to downgrade to 4.6.3 unlock OS. In recovery mode the phone is connected with computer, I see serial number and "sideload" next, the update.bin file is in ADB folder, but at next step I get the message
"cannot read update.bin" . I run Win 10 on computer, I try also on Win 7, same problem. I downloaded
4.6.3 unlock OS first with Microsoft Edge, it has .zip extension, then downloaded with Chrome it came with .bin extension, neither one work. Any ideas ? Because I ran out.
Click to expand...
Click to collapse
Microsoft Edge and Internet Explorer downloaded the 4.6.3 update as a zip file for me also. I've had the same error (cannot read update.bin) once when trying to sideload an update.bin. I never could figure out what the problem was, so I downgraded my phone using Safestrap. It is not recommended that you use Safestrap to update or downgrade your phone, but a few people including me have updated or downgraded their phone with Safestrap without any problems.
You will need to root your phone if you want to use Safestrap for the downgrade:
See Installing Root, Safestrap, CM11 for how to root and install Safestrap on your phone. You do not need to install CM11.
Launch Safestrap and select Install Recovery.
Download the 4.6.3 flashable-stock-image you will need for the downgrade and put the file on your phone.
Power your phone off, then power it back on.
When Safestrap starts, select RECOVERY> Install>
Browse to and select ss_update-fire-phone-35.4.6.3_user_463001620.zip.
Swipe to the right Swipe to Confirm Flash.
When the flash is complete, select Reboot System> CONTINUE>.
If you don’t want your phone rooted, launch Safestrap and uninstall Recovery, launch Kingroot and unroot your phone. I would also do a factory reset.
Edited to add: To unroot Kingroot 4.0, launch Kinguser, tap gear icon> Root authorization settings> Remove Root permission> Clear>. For Kingroot 4.5, launch Kingroot, tap gear icon> Root authorization settings> Remove Root permission> Continue> OK>. Manually uninstall any Kingroot apps that are still installed on your phone.
jack9955 said:
Microsoft Edge and Internet Explorer downloaded the 4.6.3 update as a zip file for me also. I've had the same error (cannot read update.bin) once when trying to sideload an update.bin. I never could figure out what the problem was, so I downgraded my phone using Safestrap. It is not recommended that you use Safestrap to update or downgrade your phone, but a few people including me have updated or downgraded their phone with Safestrap without any problems.
You will need to root your phone if you want to use Safestrap for the downgrade:
See Installing Root, Safestrap, CM11 for how to root and install Safestrap on your phone. You do not need to install CM11.
Launch Safestrap and select Install Recovery.
Download the 4.6.3 flashable-stock-image you will need for the downgrade and put the file on your phone.
Power your phone off, then power it back on.
When Safestrap starts, select RECOVERY> Install>
Browse to and select ss_update-fire-phone-35.4.6.3_user_463001620.zip.
Swipe to the right Swipe to Confirm Flash.
When the flash is complete, select Reboot System> CONTINUE>.
If you don’t want your phone rooted, launch Safestrap and uninstall Recovery, launch Kingroot and unroot your phone. I would also do a factory reset.
Click to expand...
Click to collapse
Thank you for your reply, I read about root/safestrap method but initially I did not want to root the phone.
Now seems to be the only choice, so thank you for info about this.
If you just type "adb devices" on the PC with the phone connected, do you see the phone? If not, then you have a driver issue. If that is the issue, the Amazon Dev. Service "Connecting your device" page may help.
Yes, at adb devices command the phone appear with serial number........ sideload. Appear connected whith phone on, I can copy on it and also in recovery mode after "apply update from ADB" . I belive that's not the problem.
I'm having the same problem. Cannot read update.bin when trying to sideload 4.6.3.
vkramac said:
I'm having the same problem. Cannot read update.bin when trying to sideload 4.6.3.
Click to expand...
Click to collapse
See this post, on how you may be able to correct your problem.
jack9955 said:
See this post, on how you may be able to correct your problem.
Click to expand...
Click to collapse
Thanks for linking this post. Regrettably, it still doesn't work...no worries though
vkramac said:
Thanks for linking this post. Regrettably, it still doesn't work...no worries though
Click to expand...
Click to collapse
I have had the exact same problem when trying to install the 4.6.3 update (cannot read update.bin), I had to use Safestrap to downgrade my phone. When you downloaded the update, was the extension a .bin or a .zip? When you say "it still doesn't work", do mean Safestrap doesn't work as well?
jack9955 said:
I have had the exact same problem when trying to install the 4.6.3 update (cannot read update.bin), I had to use Safestrap to downgrade my phone. When you downloaded the update, was the extension a .bin or a .zip? When you say "it still doesn't work", do mean Safestrap doesn't work as well?
Click to expand...
Click to collapse
I've been trying to do this through stock recovery. The file extension was .bin retrieved from Amazon's website.
I'm not interested in using Safestrap.
vkramac said:
I've been trying to do this through stock recovery. The file extension was .bin retrieved from Amazon's website.
I'm not interested in using Safestrap.
Click to expand...
Click to collapse
Yep. Can't figure this out at all. Most adb commands are working fine. ADB kill-server. ADB start-server. ADB devices. ADB reboot recovery.
Its just the ADB sideload that gets the error. Cannot read update.bin.
I'm starting to think this is WIN 10 ****ing with me.
vkramac said:
Yep. Can't figure this out at all. Most adb commands are working fine. ADB kill-server. ADB start-server. ADB devices. ADB reboot recovery.
Its just the ADB sideload that gets the error. Cannot read update.bin.
I'm starting to think this is WIN 10 ****ing with me.
Click to expand...
Click to collapse
OK, should you find a solution to the "cannot read update.bin", please post how you was able to fix the problem, your fix may help others. From an internet search, I see the most common reason for the "cannot read . . ." error is the file has a double extension of .zip.zip, bin.bin, or bin.zip.
vkramac said:
Yep. Can't figure this out at all. Most adb commands are working fine. ADB kill-server. ADB start-server. ADB devices. ADB reboot recovery.
Its just the ADB sideload that gets the error. Cannot read update.bin.
I'm starting to think this is WIN 10 ****ing with me.
Click to expand...
Click to collapse
Maybe a stupid question- But did you change the name of the downloaded bin file to "update.bin"?
Years later, but maybe it'll help. For me, it was a combo of WIndows and Bitdefender: Under properties of the update file, it said access was blocked due to the file being from another PC - checking the box there and disabling Bitdefender (only one at a time didn't help) solves the issue.
jack9955 said:
Microsoft Edge and Internet Explorer downloaded the 4.6.3 update as a zip file for me also. I've had the same error (cannot read update.bin) once when trying to sideload an update.bin. I never could figure out what the problem was, so I downgraded my phone using Safestrap. It is not recommended that you use Safestrap to update or downgrade your phone, but a few people including me have updated or downgraded their phone with Safestrap without any problems.
You will need to root your phone if you want to use Safestrap for the downgrade:
See Installing Root, Safestrap, CM11 for how to root and install Safestrap on your phone. You do not need to install CM11.
Launch Safestrap and select Install Recovery.
Download the 4.6.3 flashable-stock-image you will need for the downgrade and put the file on your phone.
Power your phone off, then power it back on.
When Safestrap starts, select RECOVERY> Install>
Browse to and select ss_update-fire-phone-35.4.6.3_user_463001620.zip.
Swipe to the right Swipe to Confirm Flash.
When the flash is complete, select Reboot System> CONTINUE>.
If you don’t want your phone rooted, launch Safestrap and uninstall Recovery, launch Kingroot and unroot your phone. I would also do a factory reset.
Edited to add: To unroot Kingroot 4.0, launch Kinguser, tap gear icon> Root authorization settings> Remove Root permission> Clear>. For Kingroot 4.5, launch Kingroot, tap gear icon> Root authorization settings> Remove Root permission> Continue> OK>. Manually uninstall any Kingroot apps that are still installed on your phone.
Click to expand...
Click to collapse
i am facing the same issue but the problem is i cant turn my phone on because it get bricked when i was trying to install MIUI 7 in it. Now it is just stuck to the amazon logo and i tried to do all these stuff to download amazon latest and installing it through adb but in command prompt it says *cannot read update.bin i cant understand what is going over here please help me out to solve this issue or i will not be able to buy a new phone dew to some financial conditions.
hamza said:
i am facing the same issue but the problem is i cant turn my phone on because it get bricked when i was trying to install MIUI 7 in it. Now it is just stuck to the amazon logo and i tried to do all these stuff to download amazon latest and installing it through adb but in command prompt it says *cannot read update.bin i cant understand what is going over here please help me out to solve this issue or i will not be able to buy a new phone dew to some financial conditions.
Click to expand...
Click to collapse
Hi, I found out your computer may block files that appears to be malicious. See this thread for information on how to unblock it.
Got it to work
I was having the same problem. I kept getting the message" cannot read file"
I was able to get it to work by typing "adb sideload" and then dragging the file in the command window right behind "adb sideload". the string will look like this
"PS C:\Users\Ryan\Desktop> adb sideload C:\Users\Ryan\Desktop\update.bin.bin
and then press enter.