Develop Bugs

[Q] Phone stopped charging?

My phone just doesn't charge anymore.. I've googled and googled. I found one page where a guy said to push up on the tongue of the port to get it centered, but that didnt help at all. I've tried multiple cords with no luck. So I have two questions. What is better to go to for help. My verizon store? Or talk to them on the phone? And if i do, would i need to return to stock? No wait, 3.. if i do need to return to stock, how would i do that with a dead phone? I posted a question on rootz aswell with no solutions yet, maybe y'all will have some ideas. Thanks ahead!
-Justin

Had the same problem recently. It's a hardware issue, the only way to fix is to change the board inside the phone than contains the USB port.
And there is unfortunately no way of re-locking the bootloader, since your phone won't get a connection to a computer due to the dead port.
I looked around in an local Android forum and found someone who could fix my phone for a very fair price. The USB board is not expensive, you can get one on ebay for about 10 dollars
Hop this helps.

flx-grafix said:
Had the same problem recently. It's a hardware issue, the only way to fix is to change the board inside the phone than contains the USB port.
And there is unfortunately no way of re-locking the bootloader, since your phone won't get a connection to a computer due to the dead port.
I looked around in an local Android forum and found someone who could fix my phone for a very fair price. The USB board is not expensive, you can get one on ebay for about 10 dollars
Hop this helps.
Click to expand...
Click to collapse
Thanks for the response, Im chatting with samsung support right now. Do you have the link of the repair guy?

HALP, USB port is borked

My computer can't see my phone via ADB or anything else, and the phone won't charge. I'm positive it's a USB port issues, as I have been able to connect to my phone before, flash ROMS, move files back and forth, etc. I've tried different cables and different USB ports. USB debugging is turned on.
I want to return the phone to stock before I try returning it. Is there a way I can do this without a USB port? Maybe use a stock nandroid or something? (even if I could do this last step, I'm not sure how I'd relock the bootloader)

you could use this to lock the bootloader https://play.google.com/store/apps/...wsMSwyLDEsIm5ldC5zZWd2MTEuYm9vdHVubG9ja2VyIl0. flash a stock rom that you could download from a web browser and you should be good

Alex1123 said:
you could use this to lock the bootloader https://play.google.com/store/apps/...wsMSwyLDEsIm5ldC5zZWd2MTEuYm9vdHVubG9ja2VyIl0. flash a stock rom that you could download from a web browser and you should be good
Click to expand...
Click to collapse
Nice, thanks!
Also, I found this... would this work?
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro

probably

Alex1123 said:
probably
Click to expand...
Click to collapse
OK, thanks!

no problem

Post 3 of my guide has a link to return to stock and locked with no USB access.

If you want to do it without Mobile Odin, there is a (free) way. See here. I've set it up for maguro, but you can easily replace all the maguro images with the toro ones. Then use segv11's BootUnlocker app (linked earlier) to re-lock the bootloader.

Thanks guys, exactly the info I was looking for. I appreciate the speedy replies!

Also, there just seems to be a generalized hardware problem with the Galaxy Nexus' USB port, I myself sent my device in because of it, and they put in a new USB port which helped prevent the problem for a week and I was extremely frustrated when it came back, and of course XDA being the lifesaver Paradise, I learned that if you get a small object like a flat-head jewelry screwdriver and slide it under the tongue of the port and apply small amounts of upward pressure (But not too much, because if it breaks you could void your warranty) to the tongue. Apparently the Nexus' port shorts out when touching the bottom of the phone, I have been good for about a month with no problems. You could try this before warranty.
Sent from my Galaxy Nexus using xda app-developers app

[Q] Am I screwed?

So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks

Depends how the usb is broken. May be easily repaired yourself. Any chance you can get a pic up so we can help better?

Hotkeys said:
So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks
Click to expand...
Click to collapse
first try another usb cable
i faced the same problem and changed the cable and it worked

https://play.google.com/store/apps/details?id=net.segv11.bootunlocker
This app claims to unlock/lock the bootloader. I haven't used it,so can't say it works.

maschiosoosai said:
https://play.google.com/store/apps/details?id=net.segv11.bootunlocker
This app claims to unlock/lock the bootloader. I haven't used it,so can't say it works.
Click to expand...
Click to collapse
you need root to use that app

simms22 said:
you need root to use that app
Click to expand...
Click to collapse
Oops,didn't see that.Bad eyes,I guess.
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
https://lh6.ggpht.com/9un6zjZ7yQUs9_J9h_MVYfRPTD1HnDyvGx0425DFWgIagTpuKSgj35bNOg_kYQmVCTU
I'm not rooted now,but if you updated via OTA maybe OTA RootKeeper can help.

Hotkeys said:
So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks
Click to expand...
Click to collapse
Been having the same charging problem, can't get adb to recognize the nexus. I've uninstalled/reinstalled the drivers. Doesn't matter if I use another USB. If anyone has another solution I'd love to hear it.

Try cleaning the bottom of the opening with a sharpened toothpick or paperclip with the battery removed. If that doesn't help try gently prying the tongue inside the charging port away from the wall.
This worked for me.
Sent from my Galaxy Nexus using xda premium

Sorry for the lack of reply guys, been busy doing things with family due to Christmas and all that jazz.
063_XOBX said:
Depends how the usb is broken. May be easily repaired yourself. Any chance you can get a pic up so we can help better?
Click to expand...
Click to collapse
I don't have a camera nearby at the moment, but I'll do my best to get a picture up soon.
rabeaoghly said:
first try another usb cable
i faced the same problem and changed the cable and it worked
Click to expand...
Click to collapse
I already have tried 2 other cables, and have had no luck unfortunately. All exhibit the same issue, so it's most likely the port.
At the moment I'm able to charge my phone if I prop the cable on something or use some other method to sort of push the jack upwards slightly, so maybe something is loose?

Hotkeys said:
Sorry for the lack of reply guys, been busy doing things with family due to Christmas and all that jazz.
I don't have a camera nearby at the moment, but I'll do my best to get a picture up soon.
I already have tried 2 other cables, and have had no luck unfortunately. All exhibit the same issue, so it's most likely the port.
At the moment I'm able to charge my phone if I prop the cable on something or use some other method to sort of push the jack upwards slightly, so maybe something is loose?
Click to expand...
Click to collapse
google it....i'm finding a lot of info about it simply being dirty inside the charging port. makes sense when you think about it. mine's in my pocket all the time, the port doesn't ever get covered and lint/etc builds up. i watched a few youtube videos. one guy used a really small sewing needle. another used a bigger one but filed it down. both said their charger felt loose when they plugged it in and afterwards it would lock like it was brand new. haven't had a chance to see if i've got anything small enough to do this yet but i'm willing to bet that that's my problem, and maybe yours as well. soon as i get around to it i'll post back again. and if you try it, be careful not to damage the connection inside

Help! USB not working, alternate ways to flash stuff.

Hello!
I have a Z1 compact with:
model number: D5503
with android 4.4.4 14.4.A.0.157
Usb port aint working, I have no idea why, I bought the phone from a girl and she didnt know what caused it. I have a feeling that she updated from 4.4.3 and something stopped working. When I try to use the diagnostics app that comes with the phone, it crashes and closes itself. The phone also tells me that there is an update available, 14.5.A.0.270, but it wont let me update it, it says "computer required"... So you see, if I cant use the usb port, how am I supposed to update it with a computer
I managed to root it using KingRoot (damned thing installed me an app that made my vibrator go crazy.. it stopped after I uninstalled it)
Ive been trying to find out ways to install recovery and flash the update, but I cant seem to find a way. I found about flashify and tried to instal NUTs dual recovery but flashify just crashes when I choose "select zip" or even when I try "select image" at the install recovery menu. Any ideas on how to proceed?
Thanks!!

If it still has warranty, you should return it. Without a working USB, you're pretty much screwed, sorry to say...

Can't you install ROM Manager from the Play Store, then install CWM or TWRP recovery, transfer a known working ROM wirelessly to the SD card and flash that?

Be.Hold said:
Can't you install ROM Manager from the Play Store, then install CWM or TWRP recovery, transfer a known working ROM wirelessly to the SD card and flash that?
Click to expand...
Click to collapse
I tried, but it says that my device is not supported yet :/

Neferzil said:
I tried, but it says that my device is not supported yet :/
Click to expand...
Click to collapse
Ok, didn't check that. Are you sure there is a problem with the USB port on the device? Maybe try changing the USB cable, some are low quality and don't make good contact. Maybe something went wrong during the update and it is just a software problem that can be fixed with a factory reset. If there is no warranty left, you could open up the phone and check for physical damage.
And if all that doesn't work, see reply #1.

Be.Hold said:
Ok, didn't check that. Are you sure there is a problem with the USB port on the device? Maybe try changing the USB cable, some are low quality and don't make good contact. Maybe something went wrong during the update and it is just a software problem that can be fixed with a factory reset. If there is no warranty left, you could open up the phone and check for physical damage.
And if all that doesn't work, see reply #1.
Click to expand...
Click to collapse
I think it is.. I tried to charge it with an official sony cable and nothing happened, although I dunno if the cable is totally compatible because it came with my live with walkman phone. Maybe the jack is messed up. If everything fails I might buy a new one and change it, and see what happens. I did a factory reset but still nothing happened. I found out that theres another flash tool app called Rashr, I dunno if I could update to lollipop with it. For now I should find an .img file of a recovery that works for my device, any ideas?
thanks btw!

If the cable can transfer files and charge your Walkman it should work with your phone too.
You could try this one: http://forum.xda-developers.com/showthread.php?t=2620794 but I can't guarantee it will work. Maybe it is better to stick with what you have and not take the risk.

Be.Hold said:
If the cable can transfer files and charge your Walkman it should work with your phone too.
You could try this one: http://forum.xda-developers.com/showthread.php?t=2620794 but I can't guarantee it will work. Maybe it is better to stick with what you have and not take the risk.
Click to expand...
Click to collapse
Nope, doomlords recovery wont work with my version but hey! I guess you're right! At least the phone is fully functional, except for the usb thingy. I'll just seize the day haha, thanks!!

How're you going to charge it?
If it still charges you can use it how it is, if not you're screwed.
You can't use the ROM manager stuff on the Sony phones because they don't use a normal recovery like the rest of the Androids. It has it's advantages as it's hard to really brick it but if the USB socket doesn't work you've got nothing to work with.
So find out if it's in warranty, if it is get it fixed. If it isn't you might have to fix it yourself or pay to get it fixed.
Although if it charges you could just use it how it is until you can pick up another phone, probably the Z3 compact if you like this size.

Fortunately the magnetic charging port does work it takes its time to charge tho :/

Maybe I shouldn't tempt you but have you tried this one: http://forum.xda-developers.com/son.../stock-d550314-5-0-270customized-ce1-t3115487 with that Rashr app? It includes a recovery and is prerooted.

Ahh of course!
As you can tell I haven't had a Sony phone long, although I use the magnetic dock all the time!
It might be worth asking a few shops for a quote to fix it. I spoke to a guy who fixed phones for a living yesterday, he wouldn't give me many tips but he did let me know that Sony phones were all heat based to pull apart. Said they weren't easy, which is what I'd gathered.
I guess he doesn't want to answer questions as he'd rather do it for me and have me pay him!

Do a factory reset and teardown and clean the phone.
Sent from my SM-N910V using XDA Free mobile app

FYI, i recently opened mine with the help of a small travelling hair dryer and some prying tools. It was a 10 minute job. There are lots of videos on YouTube too. You just need some new adhesives or good double-sided sticky tape to put it back together. You will probably lose the waterproof sealing though.

Be.Hold said:
Maybe I shouldn't tempt you but have you tried this one: http://forum.xda-developers.com/son.../stock-d550314-5-0-270customized-ce1-t3115487 with that Rashr app? It includes a recovery and is prerooted.
Click to expand...
Click to collapse
I left a comment there to see if they know if its viable to do it with rashr
Cluey said:
Ahh of course!
As you can tell I haven't had a Sony phone long, although I use the magnetic dock all the time!
It might be worth asking a few shops for a quote to fix it. I spoke to a guy who fixed phones for a living yesterday, he wouldn't give me many tips but he did let me know that Sony phones were all heat based to pull apart. Said they weren't easy, which is what I'd gathered.
I guess he doesn't want to answer questions as he'd rather do it for me and have me pay him!
Click to expand...
Click to collapse
Yup! They used glue because of the waterproof feature. Ive been thinking about that as well, going to a service shop. I do know how to modify circuits but at least if they mess up, theyll have to answer for it .

Be.Hold said:
FYI, i recently opened mine with the help of a small travelling hair dryer and some prying tools. It was a 10 minute job. There are lots of videos on YouTube too. You just need some new adhesives or good double-sided sticky tape to put it back together. You will probably lose the waterproof sealing though.
Click to expand...
Click to collapse
Hair dryers ftw! I do need to open it up, to change the housing because its all girly pink.. Although after a quick look I cant tell the phone seals have already been broken, so someone tried to open it and didnt close it properly. Ive been looking for spare parts online and Ive found some pretty decent ones. Battery cover, frame and stickers. They come from china so I wouldnt risk figuring out if the phone is still waterproof after the "refurbishing".

If you're gonna replace the battery cover, might as well go for the japanese glass version (z1f).

Be.Hold said:
If you're gonna replace the battery cover, might as well go for the japanese glass version (z1f).
Click to expand...
Click to collapse
awesome!

USB Connector Connected / Disconnected

I have had my Note 10+ for about over a week now. Last night I used samsung pay and it started flashing
"Android System USB Connector Connected"
"Android System USB Connector Disconnected"
I have searched online and have tried a few different things.
I can reboot the phone and it will work fine for a few hours and then it starts doing it again. I do not have case on the phone and the USB port is fine. (From what I can see.)
Any Ideas
A link to the Video Click Here

blink8512 said:
I have had my Note 10+ for about over a week now. Last night I used samsung pay and it started flashing
"Android System USB Connector Connected"
"Android System USB Connector Disconnected"
I have searched online and have tried a few different things.
I can reboot the phone and it will work fine for a few hours and then it starts doing it again. I do not have case on the phone and the USB port is fine. (From what I can see.)
Any Ideas
A link to the Video Click Here
Click to expand...
Click to collapse
Use some compressed air and blow out the port, let's see if that helps.

rcobourn said:
Use some compressed air and blow out the port, let's see if that helps.
Click to expand...
Click to collapse
Thank you, I have tried that. I really dont think it is the port its self

blink8512 said:
Thank you, I have tried that. I really dont think it is the port its self
Click to expand...
Click to collapse
Yes, that's a weird one. I can't seem to download the video, may be bad data connection where I am at the moment.

blink8512 said:
Thank you, I have tried that. I really dont think it is the port its self
Click to expand...
Click to collapse
Hi, did you ever solve this?

Try clearing the system cache...

blackhawk said:
Try clearing the system cache...
Click to expand...
Click to collapse
Tried that justnow, no luck. Thanks. I tried a fresh install of my ROM, wiping everything, and still got the issue when rebooting. i would have no problem IF I could force Android to not wake when the USB is plugged in or out. Not sure how to set that. You can turn off the notification in settings.

asif9t9 said:
Tried that justnow, no luck. Thanks. I tried a fresh install of my ROM, wiping everything, and still got the issue when rebooting. i would have no problem IF I could force Android to not wake when the USB is plugged in or out. Not sure how to set that. You can turn off the notification in settings.
Click to expand...
Click to collapse
Try; Developer options>Default USB configuration

blackhawk said:
Try; Developer options>Default USB configuration
Click to expand...
Click to collapse
Tried that. When you first go in, nothing is selected. I chose a couple but nothing worked. Settled on charging only. No luck.
Also from Googling tried cleaning out the port. But it was pretty clean.

asif9t9 said:
Tried that. When you first go in, nothing is selected. I chose a couple but nothing worked. Settled on charging only. No luck.
Also from Googling tried cleaning out the port. But it was pretty clean.
Click to expand...
Click to collapse
The C port PCB maybe defective. A couple SM mosfets, caps and resistors on it.
Relatively easy to change out, a $20 part*. Make sure you ID it by the PN# on it. If you get the wrong one you'll lose your mobile connection... so I learned recently
There's at least 2 variants for the 10+ and some parts guys aren't too bright.
Make sure to try at least one known good cable first. A cable failure is more likely.
*always nice to have a spare one handy.

blackhawk said:
The C port PCB maybe defective. A couple SM mosfets, caps and resistors on it.
Relatively easy to change out, a $20 part*. Make sure you ID it by the PN# on it. If you get the wrong one you'll lose your mobile connection... so I learned recently
There's at least 2 variants for the 10+ and some parts guys aren't too bright.
Make sure to try at least one known good cable first. A cable failure is more likely.
*always nice to have a spare one handy.
Click to expand...
Click to collapse
Thanks. I definitely have tried different cables. Just fyi for whoever googles this next. You may have seen online that the error isn't rare. but other than the solutions you posted, there isn;t one answer for all. really weird.

blink8512 said:
Thank you, I have tried that. I really dont think it is the port its self
Click to expand...
Click to collapse
asif9t9 said:
Thanks. I definitely have tried different cables. Just fyi for whoever googles this next. You may have seen online that the error isn't rare. but other than the solutions you posted, there isn;t one answer for all. really weird.
Click to expand...
Click to collapse
Your welcome. What 10+ variant and OS?

blackhawk said:
Your welcome. What 10+ variant and OS?
Click to expand...
Click to collapse
I have a Note 9, Galaxy Project.
Looks like the old xposed had a module for "no wake on charge". I have magisk but nothing like that.

asif9t9 said:
I have a Note 9, Galaxy Project.
Looks like the old xposed had a module for "no wake on charge". I have magisk but nothing like that.
Click to expand...
Click to collapse
This is one of the reasons why I stay with the stock firmware.

blackhawk said:
This is one of the reasons why I stay with the stock firmware.
Click to expand...
Click to collapse
Which reason?

asif9t9 said:
Which reason?
Click to expand...
Click to collapse
Less questions that don't have any answers.
Larger adaptation means most of the bugs if not worked out are at least well known.
Stock Android are also nearly impossible to crash and burn barring acts of gross stupidity.
Lol, if I want to play with demons I still have W7.