Help! USB not working, alternate ways to flash stuff. - Xperia Z1 Compact Q&A, Help & Troubleshooting

Hello!
I have a Z1 compact with:
model number: D5503
with android 4.4.4 14.4.A.0.157
Usb port aint working, I have no idea why, I bought the phone from a girl and she didnt know what caused it. I have a feeling that she updated from 4.4.3 and something stopped working. When I try to use the diagnostics app that comes with the phone, it crashes and closes itself. The phone also tells me that there is an update available, 14.5.A.0.270, but it wont let me update it, it says "computer required"... So you see, if I cant use the usb port, how am I supposed to update it with a computer
I managed to root it using KingRoot (damned thing installed me an app that made my vibrator go crazy.. it stopped after I uninstalled it)
Ive been trying to find out ways to install recovery and flash the update, but I cant seem to find a way. I found about flashify and tried to instal NUTs dual recovery but flashify just crashes when I choose "select zip" or even when I try "select image" at the install recovery menu. Any ideas on how to proceed?
Thanks!!

If it still has warranty, you should return it. Without a working USB, you're pretty much screwed, sorry to say...

Can't you install ROM Manager from the Play Store, then install CWM or TWRP recovery, transfer a known working ROM wirelessly to the SD card and flash that?

Be.Hold said:
Can't you install ROM Manager from the Play Store, then install CWM or TWRP recovery, transfer a known working ROM wirelessly to the SD card and flash that?
Click to expand...
Click to collapse
I tried, but it says that my device is not supported yet :/

Neferzil said:
I tried, but it says that my device is not supported yet :/
Click to expand...
Click to collapse
Ok, didn't check that. Are you sure there is a problem with the USB port on the device? Maybe try changing the USB cable, some are low quality and don't make good contact. Maybe something went wrong during the update and it is just a software problem that can be fixed with a factory reset. If there is no warranty left, you could open up the phone and check for physical damage.
And if all that doesn't work, see reply #1.

Be.Hold said:
Ok, didn't check that. Are you sure there is a problem with the USB port on the device? Maybe try changing the USB cable, some are low quality and don't make good contact. Maybe something went wrong during the update and it is just a software problem that can be fixed with a factory reset. If there is no warranty left, you could open up the phone and check for physical damage.
And if all that doesn't work, see reply #1.
Click to expand...
Click to collapse
I think it is.. I tried to charge it with an official sony cable and nothing happened, although I dunno if the cable is totally compatible because it came with my live with walkman phone. Maybe the jack is messed up. If everything fails I might buy a new one and change it, and see what happens. I did a factory reset but still nothing happened. I found out that theres another flash tool app called Rashr, I dunno if I could update to lollipop with it. For now I should find an .img file of a recovery that works for my device, any ideas?
thanks btw!

If the cable can transfer files and charge your Walkman it should work with your phone too.
You could try this one: http://forum.xda-developers.com/showthread.php?t=2620794 but I can't guarantee it will work. Maybe it is better to stick with what you have and not take the risk.

Be.Hold said:
If the cable can transfer files and charge your Walkman it should work with your phone too.
You could try this one: http://forum.xda-developers.com/showthread.php?t=2620794 but I can't guarantee it will work. Maybe it is better to stick with what you have and not take the risk.
Click to expand...
Click to collapse
Nope, doomlords recovery wont work with my version but hey! I guess you're right! At least the phone is fully functional, except for the usb thingy. I'll just seize the day haha, thanks!!

How're you going to charge it?
If it still charges you can use it how it is, if not you're screwed.
You can't use the ROM manager stuff on the Sony phones because they don't use a normal recovery like the rest of the Androids. It has it's advantages as it's hard to really brick it but if the USB socket doesn't work you've got nothing to work with.
So find out if it's in warranty, if it is get it fixed. If it isn't you might have to fix it yourself or pay to get it fixed.
Although if it charges you could just use it how it is until you can pick up another phone, probably the Z3 compact if you like this size.

Fortunately the magnetic charging port does work it takes its time to charge tho :/

Maybe I shouldn't tempt you but have you tried this one: http://forum.xda-developers.com/son.../stock-d550314-5-0-270customized-ce1-t3115487 with that Rashr app? It includes a recovery and is prerooted.

Ahh of course!
As you can tell I haven't had a Sony phone long, although I use the magnetic dock all the time!
It might be worth asking a few shops for a quote to fix it. I spoke to a guy who fixed phones for a living yesterday, he wouldn't give me many tips but he did let me know that Sony phones were all heat based to pull apart. Said they weren't easy, which is what I'd gathered.
I guess he doesn't want to answer questions as he'd rather do it for me and have me pay him!

Do a factory reset and teardown and clean the phone.
Sent from my SM-N910V using XDA Free mobile app

FYI, i recently opened mine with the help of a small travelling hair dryer and some prying tools. It was a 10 minute job. There are lots of videos on YouTube too. You just need some new adhesives or good double-sided sticky tape to put it back together. You will probably lose the waterproof sealing though.

Be.Hold said:
Maybe I shouldn't tempt you but have you tried this one: http://forum.xda-developers.com/son.../stock-d550314-5-0-270customized-ce1-t3115487 with that Rashr app? It includes a recovery and is prerooted.
Click to expand...
Click to collapse
I left a comment there to see if they know if its viable to do it with rashr
Cluey said:
Ahh of course!
As you can tell I haven't had a Sony phone long, although I use the magnetic dock all the time!
It might be worth asking a few shops for a quote to fix it. I spoke to a guy who fixed phones for a living yesterday, he wouldn't give me many tips but he did let me know that Sony phones were all heat based to pull apart. Said they weren't easy, which is what I'd gathered.
I guess he doesn't want to answer questions as he'd rather do it for me and have me pay him!
Click to expand...
Click to collapse
Yup! They used glue because of the waterproof feature. Ive been thinking about that as well, going to a service shop. I do know how to modify circuits but at least if they mess up, theyll have to answer for it .

Be.Hold said:
FYI, i recently opened mine with the help of a small travelling hair dryer and some prying tools. It was a 10 minute job. There are lots of videos on YouTube too. You just need some new adhesives or good double-sided sticky tape to put it back together. You will probably lose the waterproof sealing though.
Click to expand...
Click to collapse
Hair dryers ftw! I do need to open it up, to change the housing because its all girly pink.. Although after a quick look I cant tell the phone seals have already been broken, so someone tried to open it and didnt close it properly. Ive been looking for spare parts online and Ive found some pretty decent ones. Battery cover, frame and stickers. They come from china so I wouldnt risk figuring out if the phone is still waterproof after the "refurbishing".

If you're gonna replace the battery cover, might as well go for the japanese glass version (z1f).

Be.Hold said:
If you're gonna replace the battery cover, might as well go for the japanese glass version (z1f).
Click to expand...
Click to collapse
awesome!

Related

well i guess i just did another something stupid

hello all,
let me first say how much i have really appreciated all that i have learned by reading the forums here. I have enjoyed learning about how to customize my epic experience, but i fear i have made a ghastly mistake.
i was reading the thread about how to make an odin tar file as a means of backing up my current setup (which is srf 1.1.0, genocide kerenel 1.0, and erebos port theme) and thought i might try odin to see if it would work to write that tar back to the phone. well now i believe i am staring at a brick. it will not boot even to dl mode. no lights appear when attempting to charge. i have pulled the battery and even swapped in a fresh battery. any advice or help is appreciated.
Maybe using a different usb cord while having your phone (without battery) plugged into a computer/laptop might help.
Yes, try another cable with the battery out, plug into the computer and try to attain download mode. If that works you can pop the fully charged battery in.
You can also try the magic button that may or may not exist inside the back next to the camera lens.
tried a different usb cable with battery out. no luck. saw a thread a few days ago about the "magic button" so i tried that. no sure i did it right. still no life of any kind in my phone. looks like i bricked it good.
sorry, for your brick : (
But I'm sure you can get a replacement phone if you say you were trying update your firmware via update.zip and your phone dropped by accident leaving it as an result of what it is now
jarcher1971 said:
tried a different usb cable with battery out. no luck. saw a thread a few days ago about the "magic button" so i tried that. no sure i did it right. still no life of any kind in my phone. looks like i bricked it good.
Click to expand...
Click to collapse
I saw the hole (pinsize) next to the camera lens. I was wondering if this was more of a circuit breaker type reset that only works if it pops. Or that some phones have nothing there depending on board revisions.
The good news is Sprint will probably replace it for free. It should still be under warranty.
kennyglass123 said:
The good news is Sprint will probably replace it for free. It should still be under warranty.
Click to expand...
Click to collapse
what is the best way to get that done. since i messed the phone up with a non-compatible tar?
jarcher1971 said:
what is the best way to get that done. since i messed the phone up with a non-compatible tar?
Click to expand...
Click to collapse
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
thanks for the help kennyglass i will be trying that soon.
jarcher1971 said:
thanks for the help kennyglass i will be trying that soon.
Click to expand...
Click to collapse
You are welcome, and I am sorry for your loss. Hopefully you have a recent backup on your sd card.
since i seem to be a "flash-a-holic" always trying some new tweak i do the nandroid backup thing like every other day. so with a new phone i should be up and running again soon.
well, looks like i will be getting a new epic, under warranty thankfully -- store tech says that the usb port and a battery connector look bad. but they are out of stock on the phone and the replacement will not be in for 3-5 days. so for now i have to go back to my old webOS phone. man i already miss my epic. guess i'm jonesin' for a flash. maybe i'll head over to the webOS forums and see what they've got.
jarcher1971 said:
well, looks like i will be getting a new epic, under warranty thankfully -- store tech says that the usb port and a battery connector look bad. but they are out of stock on the phone and the replacement will not be in for 3-5 days. so for now i have to go back to my old webOS phone. man i already miss my epic. guess i'm jonesin' for a flash. maybe i'll head over to the webOS forums and see what they've got.
Click to expand...
Click to collapse
HAHA. I still have my Palm Pre for a backup and saw somewhere that somebody was able to put Android on it.
cool!! might have to look that up!
@jarcher1971, I have unfortunately bricked my device as well (story here: http://forum.xda-developers.com/showthread.php?t=1090822) and I was wondering, what exactly did you tell the repair tech?
I'm planning to go with the story that it was working fine and then at one point it just wouldn't turn on. Maybe I should include it was after taking the phone off the charger?
Thanks, any help is appreciated!
Yeah, I listed all that a few posts back in this thread.
Here:
kennyglass123 said:
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
Click to expand...
Click to collapse
Was like 6 posts back
kennyglass123 said:
Here:
Originally Posted by kennyglass123
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
Was like 6 posts back
Click to expand...
Click to collapse
yep that was about how it went at the store too

nexus not charging

i know it is already posted but my issue is different. Some can charge their phone when it is off but mine cant charge even if its off.
When its off and i plug the charger the lightning logo appears, it indicates that its charging but when i turn it on the percentage of the battery remained the same. it didnt charge at all. Also my pc does not recognize my phone whether if its off or on.
i tried with no luck changing rom, kernel, used different cables and chargers (i even used one from LG).
i want to take it back to samsung but my bootloader is unlocked, im using costume rom, and rooted. They will not accept or repair it
EDIT: i want to install the stock rom and relock bootloader but how? since my pc doesnt connect to my phone
Look in the development section and download the nexus toolkit.
Sent from my Galaxy Nexus using xda app-developers app
ticholas said:
Look in the development section and download the nexus toolkit.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
How can i use it if my pc can't recognize my phone? Driver is already installed and it was working before
Sent from my Galaxy Nexus using xda app-developers app
Use a cocktail stick and try push the chipinside your phone slot upwards a little (if the phone were laid faceup on a table). Be delicate as you dont want to force it, but a little nudge up and your problems should aaaaall be resolved.
ive already done that no luck.
bump!
if i can restore my phone to stock recovery, stock rom, stock kernel, remove root will they accept it(warranty)? or do they have something to know that i modified my phone?
EDIT: because im planning to return in back to samsung
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM
Is it a play store model or international? If it is international and you are located in the USA, Samsung will not do it. You can replace the usb port yourself..
mine too
Mine did the exact same thing. Good luck sending it in and having them actually fix it. I'm beginning to think their tech guys are really just a room full of chimps randomly putting stuff together.
I told them exactly what the problem was (because I looked it up before sending it in and my problem was the exact same as everyone else's) and they ignored me and just switched out the battery. That didn't work, so I sent it back again. Then, they updated the software. Since it's a hardware issue, obviously that did nothing. Now, they have repaired the PBA. I don't know what a PBA is or what it has to do with my USB port, but I'm betting the issue still will not be fixed and I'll have to send it back, yet again. After all this mess, I think I'm done with Samsung entirely.
turtlemama said:
Mine did the exact same thing. Good luck sending it in and having them actually fix it. I'm beginning to think their tech guys are really just a room full of chimps randomly putting stuff together.
I told them exactly what the problem was (because I looked it up before sending it in and my problem was the exact same as everyone else's) and they ignored me and just switched out the battery. That didn't work, so I sent it back again. Then, they updated the software. Since it's a hardware issue, obviously that did nothing. Now, they have repaired the PBA. I don't know what a PBA is or what it has to do with my USB port, but I'm betting the issue still will not be fixed and I'll have to send it back, yet again. After all this mess, I think I'm done with Samsung entirely.
Click to expand...
Click to collapse
i have sent it already. fortunately i was able to return to stock without USB. Hope they cant detect that ive done a mess on my phone.
probably the repair shop where you took your phone are just too lazy to repair. I hope they wont do the mess they did to you but i think it depends on tech guys if they are lazy enough to repair.
lowandbehold said:
Is it a play store model or international? If it is international and you are located in the USA, Samsung will not do it. You can replace the usb port yourself..
Click to expand...
Click to collapse
it is international and im in Italy. i took it back to the shop where ive bought and they'ce accepted it. The problem is that this shop will send my phone to samsung and i afraid that they will call me and ask me if i did something that voids my warranty
silverhunk said:
i have sent it already. fortunately i was able to return to stock without USB. Hope they cant detect that ive done a mess on my phone.
probably the repair shop where you took your phone are just too lazy to repair. I hope they wont do the mess they did to you but i think it depends on tech guys if they are lazy enough to repair.
it is international and im in Italy. i took it back to the shop where ive bought and they'ce accepted it. The problem is that this shop will send my phone to samsung and i afraid that they will call me and ask me if i did something that voids my warranty
Click to expand...
Click to collapse
Did you get it fixed?
This is kind of what my phone is doing too (here's the thread i've made)
http://forum.xda-developers.com/showthread.php?t=2059289
It will charge, but only to a certain point, regardless of rom, kernel, on or off, etc
over the past few days the maximum charge has gone down and down. Now it only charges to a max of 82%. I have 2 batteries and it does the same thing on each. My (hopeful) solution is that i bought an external wall battery charger and will charge batteries that way. I have the verizon model so if i wanted to do some sort of warranty work i'd probably have to go through them (not even sure if im still covered). I really dont want to deal with it. It boggles my mind why my phone is doing this though, charges fine but not to full. Oh well c'est la vie.
cymru said:
Use a cocktail stick and try push the chipinside your phone slot upwards a little (if the phone were laid faceup on a table). Be delicate as you dont want to force it, but a little nudge up and your problems should aaaaall be resolved.
Click to expand...
Click to collapse
i wouldnt recommend that to people, for me it went from a phone with "phantom charging" (ie flashing on and off for charging) and issues charging to a short circuit on the usb connection, so that the phone switches off when a usb cable is plugged in. What is well worth trying first is simply giving the port a good clean, a little bit of alcohol and that same cocktail stick may well solve your issue. I've been left charging via a chopped up usb cable to the dock connectors.
i dont doubt that forcing the tab in the port may have worked for you, but it has failed badly for others (ie me), so just be careful suggesting it
I had a similar problem as my micro usb socket was damaged. Don't worry about sending it for repair, do it yourself. The circuit board with a new micro usb socket is available on ebay, I paid £5 for mine. Watch a tear-down video or 2 on youtube and you will be sorted.
The GNex is easy to take apart requiring just a small philips head screwdriver and a pry tool, i used a guitar pik, and these are also available on ebay for just a few ££'s.
Can do the whole job in 15 minutes.

[Q] Looping + Volume down not working

Hi
I have a serious problem. In short, my phone is starting normally until it reaches to the Lock Screen it hangs there for a sec then it will restart and keeps like this until it is out of battery. Also for me the volume down button doesnt work at all meaning I cant reach to Bootloader.
Details:
One day my HOX fall into my fish tank but I was able to take it out immediately and put it into bag of rice and it survived with two things not working: headset input and the Volume Down button.
Ok. I had no problems without them until last night. I have Android Revolution HD but dont know which version I dont remember. I wanted to go back to stock. And here what I did as much as I can remember:
- Flashed secure BOOT.IMG. I took it out from RUU 1.29.415.
- Flashed Recovery also took it from RUU.
- Relocked it.
Until now I had no problem I was able to use HTC Quick Root to restart to bootloader. Actually After relocking it was rebooting always to bootloader. I was never able to go to Recovery at all.
The real problems started when UNLOCKED it again.
Now what is going on is that it is looping as I mentioned at the beginning. I CANT go to bootloader because of the button problem. And Mainly the HTC Quick Root cant recognize it when I connect it to My Laptop although I'm sure the laptop does.
I tried RUU a time and it showed me version error.
Please advise. I am desperate I cant afford buying a new phone.What should I do?
Hope those fishies didnt fry !
Wilks3y said:
Hope those fishies didnt fry !
Click to expand...
Click to collapse
No the tank was empty I was filling the tank only.
Update:
I have just uninstalled HTC drivers from my laptop and installed them again. When I connect my HOX - it is turned off- I got the following :
USB Composite Device --- Ready to use.
USB Mass storage --- Ready to use.
MyHTC -- Ready to use.
HTC Android Phone USB Device --- Ready to use.
But the problem remains as it is.
You seem to have (re)discovered that electronics and water don't mix.
BenPope said:
You seem to have (re)discovered that electronics and water don't mix.
Click to expand...
Click to collapse
Please with all due respect. I am burning in hell to solve my problem. We can laugh about my actions later but please if you can help do otherwise keep it until later.
AALJAM said:
Please with all due respect. I am burning in hell to solve my problem. We can laugh about my actions later but please if you can help do otherwise keep it until later.
Click to expand...
Click to collapse
Take it apart and wash it with isopropyl alcohol. You should be able to find some guides for this type of thing.
BenPope said:
Take it apart and wash it with isopropyl alcohol. You should be able to find some guides for this type of thing.
Click to expand...
Click to collapse
I will look for it and give it a try. Thanks.
AALJAM said:
I will look for it and give it a try. Thanks.
Click to expand...
Click to collapse
OH no man. Just looking at the video scared me out. I dont have the skill doing that I know I will damage it.
Well, the question is Why the program wont see it connected while it will be recognized by the laptop even if the mobile is off ? I just need a way somehow to go to the bootloaders.
AALJAM said:
I will look for it and give it a try. Thanks.
Click to expand...
Click to collapse
The more you use it, the less likely you'll be able to fix it. You need to disconnect the battery.
Impurities in the water will short the electronics and fry them.
The alcohol will help dissolve the impurities and clean the components, it will evaporate without leaving a nasty residue.
Good luck, but don't hold out too much hope.
BenPope said:
The more you use it, the less likely you'll be able to fix it. You need to disconnect the battery.
Impurities in the water will short the electronics and fry them.
The alcohol will help dissolve the impurities and clean the components, it will evaporate without leaving a nasty residue.
Good luck, but don't hold out too much hope.
Click to expand...
Click to collapse
Well, the water accident happened months ago. So I guess it is too late to do that.
AALJAM said:
Well, the water accident happened months ago. So I guess it is too late to do that.
Click to expand...
Click to collapse
Find a repair shop and see if they'll take on a water-damage repair. If they dont seem confident (like they've done it before - they might confidently express doubt!), try another.
WOW. I was able to go to Fastboot simply by pressing the Volume down hard, REALLY HARD.
So now I am confused and scared what to do.
flash a rom!!
AALJAM said:
WOW. I was able to go to Fastboot simply by pressing the Volume down hard, REALLY HARD.
So now I am confused and scared what to do.
Click to expand...
Click to collapse
I suggest to flash a new rom,( if your hox bootloop or stucks at bootloader)... if battery is empty, charge it with a charge script.
hope it help you.
sorry for my bad english.

[Q] Am I screwed?

So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks
Depends how the usb is broken. May be easily repaired yourself. Any chance you can get a pic up so we can help better?
Hotkeys said:
So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks
Click to expand...
Click to collapse
first try another usb cable
i faced the same problem and changed the cable and it worked
https://play.google.com/store/apps/details?id=net.segv11.bootunlocker
This app claims to unlock/lock the bootloader. I haven't used it,so can't say it works.
maschiosoosai said:
https://play.google.com/store/apps/details?id=net.segv11.bootunlocker
This app claims to unlock/lock the bootloader. I haven't used it,so can't say it works.
Click to expand...
Click to collapse
you need root to use that app
simms22 said:
you need root to use that app
Click to expand...
Click to collapse
Oops,didn't see that.Bad eyes,I guess.
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
https://lh6.ggpht.com/9un6zjZ7yQUs9_J9h_MVYfRPTD1HnDyvGx0425DFWgIagTpuKSgj35bNOg_kYQmVCTU
I'm not rooted now,but if you updated via OTA maybe OTA RootKeeper can help.
Hotkeys said:
So I am having an issue with my USB port, it seems loose, and will only charge if the cable is pushed upwards a bit. It is also unable to connect to a computer. My question is, is it possible for me to lock my bootloader without having usb access, or root (root got messed up when I decided to update without attempting to preserve it)? Or gain root without usb? I feel like I'll have to send it in to get repaired/replaced, and from what I've read it will need to be fully stock for that. Thanks
Click to expand...
Click to collapse
Been having the same charging problem, can't get adb to recognize the nexus. I've uninstalled/reinstalled the drivers. Doesn't matter if I use another USB. If anyone has another solution I'd love to hear it.
Try cleaning the bottom of the opening with a sharpened toothpick or paperclip with the battery removed. If that doesn't help try gently prying the tongue inside the charging port away from the wall.
This worked for me.
Sent from my Galaxy Nexus using xda premium
Sorry for the lack of reply guys, been busy doing things with family due to Christmas and all that jazz.
063_XOBX said:
Depends how the usb is broken. May be easily repaired yourself. Any chance you can get a pic up so we can help better?
Click to expand...
Click to collapse
I don't have a camera nearby at the moment, but I'll do my best to get a picture up soon.
rabeaoghly said:
first try another usb cable
i faced the same problem and changed the cable and it worked
Click to expand...
Click to collapse
I already have tried 2 other cables, and have had no luck unfortunately. All exhibit the same issue, so it's most likely the port.
At the moment I'm able to charge my phone if I prop the cable on something or use some other method to sort of push the jack upwards slightly, so maybe something is loose?
Hotkeys said:
Sorry for the lack of reply guys, been busy doing things with family due to Christmas and all that jazz.
I don't have a camera nearby at the moment, but I'll do my best to get a picture up soon.
I already have tried 2 other cables, and have had no luck unfortunately. All exhibit the same issue, so it's most likely the port.
At the moment I'm able to charge my phone if I prop the cable on something or use some other method to sort of push the jack upwards slightly, so maybe something is loose?
Click to expand...
Click to collapse
google it....i'm finding a lot of info about it simply being dirty inside the charging port. makes sense when you think about it. mine's in my pocket all the time, the port doesn't ever get covered and lint/etc builds up. i watched a few youtube videos. one guy used a really small sewing needle. another used a bigger one but filed it down. both said their charger felt loose when they plugged it in and afterwards it would lock like it was brand new. haven't had a chance to see if i've got anything small enough to do this yet but i'm willing to bet that that's my problem, and maybe yours as well. soon as i get around to it i'll post back again. and if you try it, be careful not to damage the connection inside

Persistent sound issue no matter what

I've done just about everything. There's a log cat below. EVERY ROM, EVERY KERNEL STOCK OR CUSTOM, this issue is there after the first reboot. Im only going to answer every question that goes like "have you tried...." With a full rundown of what I did and results. I will remind I've tried every custom nougat rom, stock or custom and I've tried stock marshmallow rom to. Also some roms haven't even had sound on first boot. Some roms will work for a bit then they will do a soft reboot that takes 30-45 minutes to complete. Then have no sound. I'm open to taking my phone apart since my screen is fu*ked up. Im begging at this point I love this phone, I've had it for 2 months, I don't want to have to buy another one.
Tried unbrick tool yet? That may have a slightly different effect than just flashing stock ROM (as it completely nukes the device and installs everything again).
Anyways, you may have a hardware issue. In that case taking the phone apart won't do much ... You can only check the connections, that's about it.
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Tried unbrick tool yet? That may have a slightly different effect than just flashing stock ROM (as it completely nukes the device and installs everything again).
Anyways, you may have a hardware issue. In that case taking the phone apart won't do much ... You can only check the connections, that's about it.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
I did actually brick it awhile back trying to solve that damn sound issue. I used the mega unbrick guide to fix it, I can try again. Cause hell who knows it might fix it. Thanks for the recommendations.
Found out it is hardware i narrowed it to the aux port board which is what the fingerprint sensor, microphone, speaker connect to. I'm ordering a new part tomorrow for it
Did you find any solution? Im having the same issue and trying to figure out how to fix tihs
Dlind said:
Found out it is hardware i narrowed it to the aux port board which is what the fingerprint sensor, microphone, speaker connect to. I'm ordering a new part tomorrow for it
Click to expand...
Click to collapse
Please give me the link to buy. Im having same issue too. And i think its hardware
xsetiadi said:
Please give me the link to buy. Im having same issue too. And i think its hardware
Click to expand...
Click to collapse
Well, when I bought the new part and replaced it, it didn't do anything. But I can still give you a link, I need up getting a htc 10 cause I was sick of the phones bs. https://m.ebay.com/itm/OEM-Earphone...%3Ac0cbdf2615e0ab10a81ff986ffd94c65%7Ciid%3A6
Dlind said:
Well, when I bought the new part and replaced it, it didn't do anything. But I can still give you a link, I need up getting a htc 10 cause I was sick of the phones bs. https://m.ebay.com/itm/OEM-Earphone...%3Ac0cbdf2615e0ab10a81ff986ffd94c65%7Ciid%3A6
Click to expand...
Click to collapse
You mean this not rix the problem?
I
xsetiadi said:
You mean this not rix the problem?
Click to expand...
Click to collapse
It could for you, but it didn't change a thing for me. Every phones diffrent.

Categories

Resources