In my searching for a charging stand, I came across these that I thought may be of interest to others here but I hadn't seen anyone post them.
http://www.cbworldwideproducts.com/product/huawei-watch-charging-stand-copy/ DO NOT BUY, SEE POST 18
http://www.cbworldwideproducts.com/product/huawei-watch-charging-stand/ DO NOT BUY, SEE POST 20
http://www.shapeways.com/product/64...rging-stand?li=shareProduct&optionId=58838652
I went with the first one, but only ordered it today.
I was interested to the first product until i see the 30$ of shipping to Canada...
30$ for a small lightweight part, really???
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
duchkata said:
I was interested to the first product until i see the 30$ of shipping to Canada...
30$ for a small lightweight part, really???
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah $30 to Canada. No thanks
If anyone is looking for a nice stand for this watch, check out our design at artifexdesign3d.com
Not bad...
Artifexdesign said:
If anyone is looking for a nice stand for this watch, check out our design at artifexdesign3d.com
Click to expand...
Click to collapse
Looks nice, but the one the OP posted is priced better. Plus shipping is only $8.00 for California so I'm thinking about going with the one OP posted and save some money.
That last one looks really nice, but with shipping is very pricey
Unfortunately the prices listed are the best we can do. After everything that we put into this including shipping supplies, material, rubber feet and Microsuede, and then we get hit with high services charges there isn't much we can do. Remember you get what you pay for. Thanks!
jaimerod said:
Looks nice, but the one the OP posted is priced better. Plus shipping is only $8.00 for California so I'm thinking about going with the one OP posted and save some money.
Click to expand...
Click to collapse
I got this stand today from Amazon. a few minutes with an exacto knife and it's a perfect fit for my Huawei watch and nexus 6p
edit for pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, how much did you have to shave? Was it difficult?
D.
maybe a cm? it was fairly easy, just traced around the charger then took an exacto knife to it. might have taken me 10m or so. the charger sits up a few mm from flush, and I have to say the watch has aligned properly and started charging on the first try every time. I would only get it to charge 2 out of 3 times before
beartrap said:
In my searching for a charging stand, I came across these that I thought may be of interest to others here but I hadn't seen anyone post them.
http://www.cbworldwideproducts.com/product/huawei-watch-charging-stand-copy/
http://www.cbworldwideproducts.com/product/huawei-watch-charging-stand/
http://www.shapeways.com/product/64...rging-stand?li=shareProduct&optionId=58838652
I went with the first one, but only ordered it today.
Click to expand...
Click to collapse
I have the first one. works perfect for my night stand. Been using it for months now.:good:
kpjimmy said:
I have the first one. works perfect for my night stand. Been using it for months now.:good:
Click to expand...
Click to collapse
How long did it take for you to get yours after ordering it? I've not even got an email letting me know when it'll be coming.
Sent from my SAMSUNG-SM-T707A using XDA Premium HD app
I got mine from the subreddit directly from the creator. Got mine in a week, maybe less iirc
Been using this stand for a week now. Perfect for both my phone and Hwatch.
http://www.ebay.co.uk/itm/351608119...49&var=620609447795&ssPageName=STRK:MEBIDX:IT
Got it for about $8 free shipping!
lekeyboard said:
Been using this stand for a week now. Perfect for both my phone and Hwatch.
http://www.ebay.co.uk/itm/351608119...49&var=620609447795&ssPageName=STRK:MEBIDX:IT
Got it for about $8 free shipping!
Click to expand...
Click to collapse
how does the charger attach to the stand? do you mind taking some pictures of it without the watch and phone? is there any padding where the phone rests? I'd worry that bare aluminum would scratch the phone. lastly,is that a case or skin on your phone? love the red sides
kellybrf said:
how does the charger attach to the stand? do you mind taking some pictures of it without the watch and phone? is there any padding where the phone rests? I'd worry that bare aluminum would scratch the phone. lastly,is that a case or skin on your phone? love the red sides
Click to expand...
Click to collapse
I've literally just blu-tacked the puck onto the stand. There is padding for the phone support, a little bit of rubber. The padding for the watch area I added myself using a bit of felt type material. And yes that is a skin on my phone I have attached an image, the back is a black matte dbrand and the size are red true color. The stand is completely modular as well so you can add any phone in any orientation.
lekeyboard said:
Been using this stand for a week now. Perfect for both my phone and Hwatch.
Got it for about $8 free shipping!
Click to expand...
Click to collapse
I received this stand yesterday and I love it. It is great to have my phone and watch on the same stand. It took 2 weeks to arrive from China to the U.S. The watch stand is made to hold an Apple Watch charging puck. The hole in the metal is surrounded by a rubber grommet. The Huawei charging puck is too big to even begin to fit the hole so I temporarily fastened the puck using blue tape to the stand in the position I wanted . I then turned the stand over and filled the opening in the back with hot glue. I left the grommet in the opening which, if necessary, allows me to rotate the position of the charger if needed. Positioning the watch to attach properly to the charger is easy since if it doesn't connect on the first touch, you can slightly tweak the watch while the puck is held in place.
beartrap said:
I went with the first one, but only ordered it today.
Click to expand...
Click to collapse
After 3 weeks, no stand and no response from the seller. Opened a PayPal dispute several days ago and the seller has not responded. Do not buy the first item in the OP!
beartrap said:
After 3 weeks, no stand and no response from the seller. Opened a PayPal dispute several days ago and the seller has not responded. Do not buy the first item in the OP!
Click to expand...
Click to collapse
Thats really sad to hear, makes all of us selling online look bad. I knew that price was too good to be true as the seller is making very little if any profit, and probably doesn't care about his customers. Lesson learned
The same exact thing happened to me last week but with the second stand listed (same seller) - after 3 weeks, no stand and no response from the seller. I opened a PayPal dispute last week and the seller has not responded.
Do not buy the second item in the OP!
Really unfortunate because I have not seen another stand that has those notches to keep the watch aligned.
Related
Photos of the RED case next to the BLACK....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
silly video:
http://www.youtube.com/watch?v=scAkZWIv8ZA
the red case is worth it! they indeed saved the best for last....
I ordered mine yesterday. Kinda surprised I haven't received a shipping notification for it yet. How long after you ordered did it ship?
Looks good, btw.
I ordered mine day before yesterday (afternoon) and it just shipped today. I think they were buried with orders. At least it didn't take as long as Otterbox did.
yeah when they were sending out the gray ones during christmas week, that and the bad weather caused a LOT of delays.
if you placed an order in the morning with these guys, they ship out the next day. i have purchased all 3 cases from them and that is exactly how they shipped to me.
i didnt get any bubble wrap in this one though..
Demand your money back. Or a free case of bubble wrap. Glad I waited for the red,it looks great!
now you just need to mod it for the 2600mah batt...
WOW that is hot! how'd the kick stand turn out? better than the defenders I hope
dmc971989 said:
now you just need to mod it for the 2600mah batt...
Click to expand...
Click to collapse
+1
10 characters
the kickstand on these cases is nice. i posted a vid on the gray one i first received and the stand snapped off.. but due to the design of the stand, it seems to "detach" from its connection point rather than break in half like the otterbox.
http://www.youtube.com/user/marctronixx?feature=mhum#p/u/4/Rf2KqPLR8oA
corzo002 said:
WOW that is hot! how'd the kick stand turn out? better than the defenders I hope
Click to expand...
Click to collapse
Just ordered mine off eBay brand new red/black shipped from California 29.99!
Sent from my PC36100 using XDA App
tinybfk said:
Just ordered mine off eBay brand new red/black shipped from California 29.99!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Dang, guess I should have waited a few more days and saved a few bucks. Thought it would be a little longer before they hit ebay so I ordered directly from Ballistic as soon as I got the email that they were available. I didn't get mine yet, hopefully it comes on Monday.
kd0axs said:
Dang, guess I should have waited a few more days and saved a few bucks. Thought it would be a little longer before they hit ebay so I ordered directly from Ballistic as soon as I got the email that they were available. I didn't get mine yet, hopefully it comes on Monday.
Click to expand...
Click to collapse
I'm going to hold out for some reviews before I buy from ebay, just to make sure it's not a knock off.
Yeah, that's always a possibility with ebay.
Looks like they are on Amazon too.
http://www.amazon.com/gp/offer-list...rect=true&qid=1293892730&sr=8-5&condition=all
I will update if its legit when I receive it and take some pics. I mainly bought it because its shipped from California so it should only take a day or 2 to get here. I'm hoping by Tuesday. I'm pretty sure they're legit though judging from the feedback and all.
Sent from my PC36100 using XDA App
tinybfk said:
I will update if its legit when I receive it and take some pics. I mainly bought it because its shipped from California so it should only take a day or 2 to get here. I'm hoping by Tuesday. I'm pretty sure they're legit though judging from the feedback and all.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
My guess is that you're probably right. I'm still glad you're the one taking the risk on the first one
I'll get one once as you give the thumbs up!
this company likely purchased these direct form Ballistic. since the amazon company is a wholesaler, they can sell this at reduced costs. this is one reason why an item you see online is cheaper than seeing it in a brick and mortar... i would imagine its totally legit...
but if you are in doubt, just call up Ballistic and just ask them if this company is legit...
I'm pretty sure the eBay ones ad amazon ones are from the same company by the way
Sent from my PC36100 using XDA App
marctronixx said:
this company likely purchased these direct form Ballistic. since the amazon company is a wholesaler, they can sell this at reduced costs. this is one reason why an item you see online is cheaper than seeing it in a brick and mortar... i would imagine its totally legit...
but if you are in doubt, just call up Ballistic and just ask them if this company is legit...
Click to expand...
Click to collapse
I'll definitely buy from Amazon, free Prime shipping!!!
Do you have a link to the case being sold directly from Amazon. I can only find a 3rd party seller on Amazon(G.I.N DEALS Storefront on Amazon.com)
firemedic1343 said:
I'll definitely buy from Amazon, free Prime shipping!!!
Do you have a link to the case being sold directly from Amazon. I can only find a 3rd party seller on Amazon(G.I.N DEALS Storefront on Amazon.com)
Click to expand...
Click to collapse
I went ahead and just ordered the red/black through Amazon's 3rd party seller "G.I.N. Deals". Can't beat it for $30.99 and free shipping. Worst case at least Amazon is in the middle so if anything goes wrong they will intervene. I must say the seller does have very high rating/reviews so they seem very legit. Ballistic got my money on the grey/black case so I couldn't pass this deal up!
Got mine today, much better than my broken Seidio "Rugged" case. My only 2 complaints are that the headphone port cover could snap closed a little better, and the case is extremely difficult to remove once you put it on. I guess that's good in a way because I know it won't just pop off if I drop it, but I definitely would't recommend this case to anyone that does frequent battery changes.
This is yet another awesome case from pyroskins guys. I like it better than the popular clip case. Which I never thought would happen. Build quality is excellent. Usability is great. It feels really strong and durable. Check out the video....
VIDEO REVIEW
http://youtu.be/o9wErQqIcNU?hd=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nice review. Pyro must be giving you sweet swag for these reviews.
"I love the hole" ... made me laugh.
|flyte| said:
nice review. Pyro must be giving you sweet swag for these reviews.
"I love the hole" ... made me laugh.
Click to expand...
Click to collapse
lol. yeah greg is an awesome guy. he's all about the customer service. probably the best I've seen yet. i love when I find companies like this. fast shipping, all questions are answered in no time, and always willing to make the customer happy. its a great company to deal with bro.
task650 said:
lol. yeah greg is an awesome guy. he's all about the customer service. probably the best I've seen yet. i love when I find companies like this. fast shipping, all questions are answered in no time, and always willing to make the customer happy. its a great company to deal with bro.
Click to expand...
Click to collapse
Dear "Greg":
Please send me one of your cases. I promise to spam every GT10 website with gushing reviews. I PROMISE TO TITLE EVERY POST WITH CAPS-LOCK ON, and I will use a minimum of 14 exclamation points!!!!!!!!!!!!!! I will also create video reviews with weird little glitches that make anyone watching feel like having a seizure.
Just kidding. Couldn't help myself
BTW- love the custom firmware Task650. Best one I've used, especially when paired with pershoot's kernel.
LOL...
10char
task650 said:
lol. yeah greg is an awesome guy. he's all about the customer service. probably the best I've seen yet. i love when I find companies like this. fast shipping, all questions are answered in no time, and always willing to make the customer happy. its a great company to deal with bro.
Click to expand...
Click to collapse
+1 to that, when they ran out of the clip case and were waiting to get new ones in, he made sure mine got shipped asap so I could receive it before I left the country. Looks like I've got another case to purchase lol.
@Pyro,
If you read this, i have a question for you. What are the chances of you having any say in the design process of these cases? I would love to get a hybrid clip/360 version that doesn't need that elastic band to stay closed. I am gonna get the new one anyways, but I was just wondering.
Thanks for the awesome cases
Has anyone elase gotten this case? Mine is still in flight, but just wondering how others are getting on with theirs.
Sent from my GT-P7510 using xda premium
I order the 360 last Monday or Tue. I am paying by check so my delivery time will be a little bit. I will post my review, hopefully this week.
Sent from xda premium app
Just ordered mine
Just ordered mine, but from a different seller/merchant. Will report back how I find it.
SO you're at home making cookbook holders instead of working on your ROM?
lmao im jus messin wit ya bro
Are you for real? $18.99??????????
Omg I should just order this
;;
Just ordered . 2 - 5 weeks ahaha luckily I'm not in a rush for it.
I got this case before going to europe. Its been 2 weeks so far and its been pretty good. The only issue i have is that the groove farthest from the binding doesnt hold the tab up. My tab always falls down immediatley even on a flat even surface.
HybridHB said:
I got this case before going to europe. Its been 2 weeks so far and its been pretty good. The only issue i have is that the groove farthest from the binding doesnt hold the tab up. My tab always falls down immediatley even on a flat even surface.
Click to expand...
Click to collapse
That would completely defeats the purpose of the case wouldn't it...... ;x
used2hvatreo said:
+1 to that, when they ran out of the clip case and were waiting to get new ones in, he made sure mine got shipped asap so I could receive it before I left the country. Looks like I've got another case to purchase lol.
@Pyro,
If you read this, i have a question for you. What are the chances of you having any say in the design process of these cases? I would love to get a hybrid clip/360 version that doesn't need that elastic band to stay closed. I am gonna get the new one anyways, but I was just wondering.
Thanks for the awesome cases
Click to expand...
Click to collapse
Questions like this, feel free to send me an email or PM. I've been asked not to actively talk about the cases on the forums ... so I stick to lurking here and commenting in the general and Q&A threads.
email is pyroskins at gmail
But ya, I can do anything development wise ... I just have to order a qty of 500 at a time.
Sighx said:
That would completely defeats the purpose of the case wouldn't it...... ;x
Click to expand...
Click to collapse
The groove closest to the binding works for landscape and portrait modes. It happens to be the groove i want to use most of the time so it is acceptable to me
Pyro ships fast! I ordered the 360 case last Monday by personal check and in today's (sat) mail was the case. Been playing around with it and I must say that it is a solid case. I researched for a long time and Tasks video review convinced me. I bought the tab for its slim design and weight compared to other tegra 2 tablets. The case feels very light before you put the tab in it. IMO even with the case on it, I believe it is still lighter than my wife's ipad 1 or my friends xoom. I love that you can charge it with the case on it. I have three cats that think my computer desk is a good place to take a nap. Now I will never have to worry again. Price is amazing. The case and shipping to NY was under $24. I wasn't ever going to get a case for my tab, liked the feel and weight, but I had a couple close calls carrying it or just holding it under my arm if I had other things to carry. Overall, very satisfied!
As far as tab not staying in farthest groove, if you use the stretchy band that holds the case closed for travelling and just slide it up over the bottom lip of the case it should hold it in place in that last groove. Works for me anyways.
Sent from xda premium app
Stardate Tab 10.1 said:
Pyro ships fast! I ordered the 360 case last Monday by personal check and in today's (sat) mail was the case. Been playing around with it and I must say that it is a solid case. I researched for a long time and Tasks video review convinced me. I bought the tab for its slim design and weight compared to other tegra 2 tablets. The case feels very light before you put the tab in it. IMO even with the case on it, I believe it is still lighter than my wife's ipad 1 or my friends xoom. I love that you can charge it with the case on it. I have three cats that think my computer desk is a good place to take a nap. Now I will never have to worry again. Price is amazing. The case and shipping to NY was under $24. I wasn't ever going to get a case for my tab, liked the feel and weight, but I had a couple close calls carrying it or just holding it under my arm if I had other things to carry. Overall, very satisfied!
As far as tab not staying in farthest groove, if you use the stretchy band that holds the case closed for travelling and just slide it up over the bottom lip of the case it should hold it in place in that last groove. Works for me anyways.
Sent from xda premium app
Click to expand...
Click to collapse
Sadly, for me it has not arrived yet. I'm going to see how long this takes. But so you know.. I am in Toronto Canada.. so it'll be a little longer with customs and stuff
Just received the 360 yesterday. I couldnt be happier... the case is extremely well made. The tab stays up in every position, and the tab fits very well into the case and it doesnt add to much bulk. As someone else mentioned i wish they had a hybrid between the 360 and the clip, not a deal breaker just not a big fan of the elastic band that keeps the case closed. Just a tad bit of ocd on my end the hole on the back side of the case doesnt bother me, but i wish that the samsung logo was lined up in the center of the hole All in all great case and fast shipping
Ordered mine this morning and they shipped it this afternoon. That is service. Can't wait to get home and hopefully it will be there by Friday
Ordered one last night. *waits by the door*
EDIT; I am placing all of the pics I've posted in this thread below and removing them from later posts. This needed cleaned up plus it should make it easier for people to get a better idea of how they look when you get more than one and trade out the parts. More colors and pictures in the next few days...
I just got one of these and so far I have to say that I am impressed. The plugs that fit the earphone jack and the hdmi/micro usb ports fit remarkably well. I think that I would like it more if the colored plastic piece were a little less slippery. But it is the 'rubberized' plastic so it isn't that bad.
Another EDIT; After owning this for a few months I have to say that the plastic hasn't turned out to be that slippery at all. Just about right for staying on the dash (ish) and getting it in and out of my pocket. And I've decided it is more of a 9/10 to me. And for 10 to 12 bucks shipped, what's not to like.
Thanks garrett_tx for this Amazon link.
garrett_tx said:
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks goto Obartuckc for this photo...
Obartuckc said:
I have this case as well--white under with black gray outside--and love it. I've had it bout 2 weeks now and it's holding up quite nicely. =)
Click to expand...
Click to collapse
(Thanks to my Wife for holding the phones for me.)
Awesome, thanks for the review. I was just looking at this case maybe like 2 days ago.
Could you answer a couple of questions? -
- how good is it in protecting the phone if i drop it for example?
- how much thicker does it make the phone look?
- is it possible that the part of the case which "clips on" on the front of the phone can leave scratches?
- does it come with a screen protector?
THANKS!
xploited said:
Could you answer a couple of questions?
Click to expand...
Click to collapse
Edit; Pics moved to original post.
- how good is it in protecting the phone if i drop it for example?
Not sure. Haven't dropped it yet. But as you can see it is a two piece case.
The corners are doubled up with both the plastic and silicone. So I expect the case to take the hit, and not the phone.
- how much thicker does it make the phone look?
Not much.
- is it possible that the part of the case which "clips on" on the front of the phone can leave scratches?
The silicone is between the outer case and the phone, so not a problem.
- does it come with a screen protector?
Nope.
On a side note. I am ordering another one, maybe two. I like the fact that the pieces can be mixed and matched.
Also, It is a little more difficult to use with the docks because of the flap, but not impossible.
Hope that helps.
looks like a good case and there are many cool colors combinations...
i might take one of these.
thanks!
Great review, thanks a lot. And for 2 bucks I will definitely have to try it.
Interesting. Does the silicone case feel good without the hard part?
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.
thomorph said:
Interesting. Does the silicone case feel good without the hard part?
Click to expand...
Click to collapse
I removed the hard part and messed with it a little. I guess it feels ok. Without the molded plastic the silicon part is pretty loose. The sides are extra loose. The ends seem ok at best. I don't think that it would just fall off or anything while holding it. But going in and out of a pocket might be a drag.
thanks I think I will buy one on amazon, price seems more interesting
thomorph said:
thanks I think I will buy one on amazon, price seems more interesting
Click to expand...
Click to collapse
Yeah, the price looks good there too. I don't have Amazon Prime so the shipping would add 3 bucks to the total. Makes it around a dollar more than the ebay price for me. Another example of why I really need to kick Netflix and get Prime...
only certain items get "prime" status, on the case i would have to pay the 3 dollars even though i have prime
just depends on the seller on amazon
I've got this case since 4days.
Good quality/price, the silicone alone feet not so good but with the hard part it's ok.
I have this case as well--white under with black gray outside--and love it. I've had it bout 2 weeks now and it's holding up quite nicely. =)
~Sent from My Unlocked, Rooted, Shady Blued, and Pi-Crusted 1.3gHz Atrix 4G~
garrett_tx said:
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.
Click to expand...
Click to collapse
Forget a case, I'm gonna get some tricked out speakers for my huffy at the bottom of the page!
Sent from my MB860 using Tapatalk
just got this case ordered today cant wait to get it it looks nice
fleurdelisxliv said:
just got this case ordered today cant wait to get it it looks nice
Click to expand...
Click to collapse
You'll like it unless you are docking the phone constantly. It will dock, just not very well. I don't dock mine much so it isn't an issue. I ended up getting the black/red and the red/black cases. Now I can mix and match, and have a totally red or black case or leave them as they are. I really dig it all red or all black tho.
so this case can be use with the HD dock too?
neotekz said:
so this case can be use with the HD dock too?
Click to expand...
Click to collapse
Well sort of... You have to hold the rubber thingy that covers the mini usb and hdmi sockets. And once you get it in the dock the fit isn't that great. Loose and wobbly, but functional. Other than that it's a great case.
I do love this case alot i have the all black one
I got an outterbox... was actually disappointed in it. I dropped my phone from about 5 feet, bobbled it till it dropped, and it ended up landing on the top side. I picked it up and saw no physical damage, but the digitizer was not responding toward the top. The notification still works, but just underneath it to about a half inch below all the way across doesn't work. Screw you outterbox!
Sent from my MB860 using xda premium
$35 w/ overnight shipping. I'll have it monday morning
http://www.amazon.com/Poetic-Slimline-Samsung-Manufacturer-Warranty/dp/B00FLO8LFQ/ref=sr_1_1?s=electronics&ie=UTF8&qid=1381942546&sr=1-1&keywords=Poetic+Slimline+Case+for+Samsung+Galaxy+Note+10.1+2014+Edition+Black+%283+Year+Manufacturer+Warranty+From+Poetic%29&tag=androidcentral00-20
I'll let you know how it turns out. :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Poetic is being discussed in different threads in this forum, with many pictures, people have it for few weeks already. It's a good case at great price.
http://forum.xda-developers.com/showthread.php?p=47526831
Thanks!
Thanks! :good:
I'm excited :laugh:
You paid $35? I only paid $9.95 for it, with $3.95 overnight shipping.
californiarailroader said:
You paid $35? I only paid $9.95 for it, with $3.95 overnight shipping.
Click to expand...
Click to collapse
Got a link?
Pedro2NR said:
Got a link?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B00FLO8LXS/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
It's $14.95 now, that's still a lot better than $35.
I made a mistake on the shipping, it was $4.95, and not overnight, I was thinking of another order.
Item(s) Subtotal: $9.95
Shipping & Handling: $4.95
-----
Total before tax: $14.90
Sales Tax: $1.14
-----
Total for This Shipment: $16.04
californiarailroader said:
You paid $35? I only paid $9.95 for it, with $3.95 overnight shipping.
Click to expand...
Click to collapse
I paid $14.95 + 18.95 Next Day Shipping
Case works great so far for me, no digitizer probs. Will keep an eye on it though.
Apache0c said:
I paid $14.95 + 18.95 Next Day Shipping
Click to expand...
Click to collapse
Oh, you're original post says $35.
You risk damaging your digitizer if you use this case. It is really not worth it. Try writing near the top of your screen and see if you can draw a straight line. Bet you cant.
red321red321 said:
You risk damaging your digitizer if you use this case. It is really not worth it. Try writing near the top of your screen and see if you can draw a straight line. Bet you cant.
Click to expand...
Click to collapse
Can draw a straight line no problem
Sent from my SM-P600 using XDA Premium 4 mobile app
I have this case too, no problem with S Pen.
Mine was fine the first week, but soon developed problems.
red321red321 said:
Mine was fine the first week, but soon developed problems.
Click to expand...
Click to collapse
Is that with the s pen or another stylus?
I have a different magnetic case. The s pen works perfectly around the edges but the surface pen definitely loses accuracy.
red321red321 said:
You risk damaging your digitizer if you use this case. It is really not worth it. Try writing near the top of your screen and see if you can draw a straight line. Bet you cant.
Click to expand...
Click to collapse
Actually, I can.
Sent from my SM-P600 using XDA Premium 4 mobile app
californiarailroader said:
Actually, I can.
Sent from my SM-P600 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yup, me too.
See
I have to support what red321red321 is saying. Everything was good and fine for a week or so, then it absolutely ruined my digitizer and the damage this case does is irreparable. Thankfully, I am a premier silver customer at BB, so I had the extended return period and got my Note 10.1 2014 replaced with a new one.
Maybe I was unlucky, but I would not recommend rolling the dice with this case. Just trying to help.
cardinalryan said:
I have to support what red321red321 is saying. Everything was good and fine for a week or so, then it absolutely ruined my digitizer and the damage this case does is irreparable. Thankfully, I am a premier silver customer at BB, so I had the extended return period and got my Note 10.1 2014 replaced with a new one.
Maybe I was unlucky, but I would not recommend rolling the dice with this case. Just trying to help.
Click to expand...
Click to collapse
So what's the story with that case? Magent too strong? I googled this and pretty much found just this thread...
I keep reading about how these magnetic cases cause problems. Are there no non magnetic cases available for this?
I started a thread specific to non magnetic cases - no replies yet. Not sure if that means there are none or something else.
I had the poetic case and switched to the samsung book cover. The poetic magnet is much stronger. Seems like some are having problems and some aren't. I dont think the risk is worth it. Plus, the Samsung case is much thinner and lighter, and actually has the buttons in the correct orientation when you use it in landscape.
Anyone have any experience with these? They just released the Nexus 5 version http://toastmade.com/Android.html
Tempting! Here is a video review:
http://www.youtube.com/watch?v=3HxLBz4piM4
The edges look terrible though... ugh.
If it’s a 3M, how come it is a REAL wood?
kong said:
If it’s a 3M, how come it is a REAL wood?
Click to expand...
Click to collapse
Because it uses 3M adhesive to adhere it to the phone its not vinyl
Nocturnal86 said:
Because it uses 3M adhesive to adhere it to the phone its not vinyl
Click to expand...
Click to collapse
Now that sounds interesting :highfive:
I actually like my Nexus logo running landscape on the phone like stock. I wonder if they can cut that out?
Since screen protectors usually cover those top and bottom areas, would you basically not be able to take off the screen protector without taking off the skin? Would you even be able to use a screen protector underneath? I feel like it might be elevated.
I have many leather bound books. And my phone smells of rich mahogany.
I couldnt resist. lol
Must-not-tap-buy..
Sh*t, I'll gonna take one
Btw, it reminds me of some locals here whose specialty is making bamboo case for phones
It only costs $20-30 each and you can put whatever pic/text you want
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dunno if they can make one for N5
I pulled the trigger this morning and order the white ash one. I ordered the front piece too, but not certain if I will install that piece. Will keep you guys posted when mine comes in.
Lootes said:
I pulled the trigger this morning and order the white ash one. I ordered the front piece too, but not certain if I will install that piece. Will keep you guys posted when mine comes in.
Click to expand...
Click to collapse
Yes, please post pictures!
Hey guys, got the cover this morning and below is a link to the photos. I haven't put the front face cover on yet but placed it on the phone for the pictures so you can get an idea. The white ash color works well with my white Nexus as it isn't that visible at the seems.
Installation was straight forward and wasn't too challenging. One concern is if I will be able to pop out the sim tray, but will test that when I get home tonight.
let me know if you have any questions.
https://plus.google.com/u/0/photos/+AlexanderLuton/albums/5981882660137349729
Lootes said:
Hey guys, got the cover this morning and below is a link to the photos. I haven't put the front face cover on yet but placed it on the phone for the pictures so you can get an idea. The white ash color works well with my white Nexus as it isn't that visible at the seems.
Installation was straight forward and wasn't too challenging. One concern is if I will be able to pop out the sim tray, but will test that when I get home tonight.
let me know if you have any questions.
https://plus.google.com/u/0/photos/+AlexanderLuton/albums/5981882660137349729
Click to expand...
Click to collapse
Lookds good. How is the feel in the hand? do you feel the edges and all that?
The feel is good. It is less slick than the stock white back, so I don't feel like it is going to slide out of my hand. Also, although subtle, you do feel the grain in the wood which is a nice touch.
Regarding the edges, there is a small seam between the back piece and the side pieces that breaks the continuity but it is something that after some use I doubt I will even notice. The edge of the side that is facing the screen is a bit more noticeable, but nothing too concerning, it is a piece of wood after all.
All in all, it is very well made, I especially like how the single back piece is designed to wrap over the curves of the back plate.
Just bit the bullet on a bamboo front and back for my black N5 will update with a post when it arrives!
Lootes said:
The feel is good. It is less slick than the stock white back, so I don't feel like it is going to slide out of my hand. Also, although subtle, you do feel the grain in the wood which is a nice touch.
Regarding the edges, there is a small seam between the back piece and the side pieces that breaks the continuity but it is something that after some use I doubt I will even notice. The edge of the side that is facing the screen is a bit more noticeable, but nothing too concerning, it is a piece of wood after all.
All in all, it is very well made, I especially like how the single back piece is designed to wrap over the curves of the back plate.
Click to expand...
Click to collapse
How long did it take for them to ship it out for you? I'm a bit anxious, and I ordered it Saturday night and paid for priority shipping, do you think it'd be wrong to expect it by Friday?
Sent from my Nexus 5 using xda app-developers app
rudydimacali said:
How long did it take for them to ship it out for you? I'm a bit anxious, and I ordered it Saturday night and paid for priority shipping, do you think it'd be wrong to expect it by Friday?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I ordered mine on the 5th of February and it shipped on the 12th, which was 5 business days. I didn't do priority shipping and it was delivered on the 15th. When I ordered mine, covers for the white nexus were shipping in 3 to 5 business days which is what I got. I do recall there was a message that said black nexus covers were taking a little longer to fulfill, not sure if that is still the case.
Lootes said:
I ordered mine on the 5th of February and it shipped on the 12th, which was 5 business days. I didn't do priority shipping and it was delivered on the 15th. When I ordered mine, covers for the white nexus were shipping in 3 to 5 business days which is what I got. I do recall there was a message that said black nexus covers were taking a little longer to fulfill, not sure if that is still the case.
Click to expand...
Click to collapse
Yep. Did say 3-5 days Guess it'll be sometime next week then. Thanks!
Sent from my Nexus 5 using xda app-developers app
Just installed mine and am very pleased with it. It has a really nice feel even if the edges on the wood are a bit sharp, not too sharp though. I installed the front cover on top of a glass screen protector with zero issues.
heres mine with ebony ..looks and feel great in my hands