Related
Hi all, long time lurker here.
Just for some background, I used to have a HTC Desire & was successful in installing Cyanogenmod 7.
So to my problem.
I have a HTC One X with Software 1.29.751.12. Initially I rooted my phone to install Titanium Backup so I could remove the bloatware (Yes I deleted rather than Freeze)
I have system update 2.17.751.2 that keeps asking me to install. I can download the update fine, when I try to run it, the phone reboots, the bar gets a quarter of the way then I get the red triangle error & phone reboots again.
After some searching I think this is because I removed the installed apps that came with the phone, therefore I'm attempting to re-install a stock rom.
Initially I downloaded this: RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.29.980.11_Radio_1.1204.105.14_release_260560_signed.exe however when I ran it the installer errors & advises me to use the correct update.
Going by this guide: http://forum.xda-developers.com/showthread.php?t=1660807
I found out my CID & other info by using fastboot cmd "fastboot oem readCID"
HTC CID HTC__621 = TWM-TW
Version 4.0.3
Sense Version 4.0
Software 1.29.751.12
HTC SDK API 4.12
HTCExtention HTCExtention_403_1_GA_7
Kernal 2.6.39.4-gc9932b1
From this I gather I have to use a specific RUU so I downloaded the following:
RUU_ENDEAVOR_U_ICS_40_TWM_TW_1.29.921.7_Radio_1.1204.104.14_release_259286_signed
RUU_ENDEAVOR_U_ICS_40_TWM_TW_1.26.921.3_Radio_1.1204.90.13_release_251851_signed
When I run either of these files I get the same problem as when I was using the optus RUU:
Installer Runs
Verifies Information - Here it shows Image version 1.29.751.12 & I only get the option to Update
Click update to version <version number>
Phone reboots to bootloader (Here phone just displays HTC)
Software shows Sending.......
At this point I get the error 155:Unknown Error - Rom Update cannot update phone.
I do remember seeing somewhere on my phone the word "Chunghwa" I think this is when I received an error on my phone & this word was in the error report, so I tried downloading this RUU_ENDEAVOR_U_ICS_40_Chunghwa_1.26.751.3_Radio_1.1204.90.13_release_251852_signed
However I can't even run this update as I get a windows error:
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 1 (7601)
IE Version: 9.0.8112.16421
At this point I kind of gave up with installing a stock RUU & tried installing a Cyanogenmod 10 nightly. I managed to get the clockwork recoverymod installed, I copy the cm nightly rom to my sd card & when I try to run it I get error status 7. I think this may because I'm not doing something with boot.img or clearing files????
Ultimatly I'd like to install a stock RUU as I like using Sense & I want the latest Sense update.
I'd like to think I know what I'm doing when it comes to ROM's but as you know a little information is dangerous! It could be I'm missing a basic step, or the phone has a hardware issue. I'm going to put it down to being a problem with me missing something.
Any help would be appreciated.
Thanks,
I would extract the recovery_signed.img and the boot_signed.img from the 751 ruu using winzip. You can do this by loading the ruu, typing %temp% in your search bar and looking for the most recent folder. It will not have a name but it will have a bunch or letters and numbers. Once you have extracted the .img files place them in your fastboot folder.
Close the ruu.
Put your phone into fastboot and connect it by usb. Type the following commands one at a time "fastboot erase cache", fastboot flash recovery recovery_signed.img" and "fastboot flash boot boot_signed.img"
You should get a ok or something simmilar after every command.
Leave the phone in fastboot and start the ruu.
If that does not work download the 2.17. Ruu and repeat the steps.
Hope it helps
Sent from my HTC One X using xda app-developers app
note: Unable to open Rom.zip with Winzip, had to use WinRar.
Winzip showed error:central directory not found.
Tried with:
RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.29.980.11_Radio_1.1204.105.14_release_260560_signed
Verifying info.
click update
click next
checking....
rebooting to bootloader
waiting for bootloader
htc appears on phone
erasing user data
sending
Error [155] unknown Error, The ROM update utility cannot update your android phone, please get thecorrect ROM update utility & try again
---
RUU_ENDEAVOR_U_ICS_40_TWM_TW_1.29.921.7_Radio_1.1204.104.14_release_259286_signed
Verifying info.
click update
click next
checking....
rebooting to bootloader
waiting for bootloader
htc appears on phone
erasing user data
sending
Error [155] unknown Error, The ROM update utility cannot
update your android phone, please get the correct ROM update utility & try again
---
Checked on Error 155 found this http://forum.xda-developers.com/showthread.php?t=1835373
relocked phone with command fastboot oem lock. Even though I got the following:
C:\Android>fastboot oem lock
...
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.243s
phone now shows RELOCKED when im in fast boot.
Ran file
RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.29.980.11_Radio_1.1204.105.14_release_260560_signed
Verifying info.
click update
click next
checking....
rebooting to bootloader
waiting for bootloader
htc appears on phone
erasing user data
sending
updating signature
Error 131: Customer ID Error, The ROM update utility cannot update your android phone, please get the correct ROM update utility & try again
Tried file
RUU_ENDEAVOR_U_ICS_40_TWM_TW_1.29.921.7_Radio_1.1204.104.14_release_259286_signed
As this is the one I think I should be using due to my CID - HTC__621 = TWM-TW
Verifying info.
click update
click next
checking....
rebooting to bootloader
waiting for bootloader
htc appears on phone
erasing user data
sending
Updating Signature
Error 155 Unknown Error
Tried
RUU_ENDEAVOR_U_ICS_40_Chunghwa_1.26.751.3_Radio_1.1204.90.13_release_251852_signed
Error 140 Bootloader Version Error
RUU_ENDEAVOR_U_ICS_40_Chunghwa_1.29.751.7_Radio_1.1204.104.14_release_259285_signed
Error 155 Unknown Error
So it seems I need version 1.29.751.12 exactly. Search last night & couldn't find it anywhere.
Could someone help me find the Chunghwa 1.29.751.12 RUU please?
It would seem that the 1.29.751.12 update isn't for download anywhere.
I guess this leaves me with two options. Attempt to get Cyanogen Mod install (Or other, its just I've used this one before)
Or, would it be possible to find out what are the stock apps installed on this RUU? I know that Chunghwa is Taiwanese for China & I did remove the apps with Chinese names.
If someone has this ROM & could provide links for the stock apps for me to download that would be awesome.
Or, if there is anyone that has a solution to install any stock ROM on my HTC One X it would be appreciated.
Using google play & searching through My Apps I've so far found that the following apps were installed when I had my phone:
Hami Apps 軟體商店
TL334WG
Hami Book
SPRING HOUSE ENTERTAINMENT INC.
HamiMusic
SPRING HOUSE ENTERTAINMENT INC.
ebuddy XMS
KKBOX Player Widget
HamiMusic
中華至尊股票機
三竹資訊
Just tried the OTA update to 2.17.751.2 & it still failed though, maybe I'm missing one?
found more apps that were installed as stock on 1.29.751.12
bubue Books Reader
bubue.com
IM+
Shape
Path
Path, Inc.
Update still failed... Searching for more solutions
I'm now using Cyanogenmod 10.
I would still like to go back to a stock RUU at some point so if anyone can help please let me know.
Well, my friend i am kind of stuck in the same situation i suppose.
i foolishly took no backup and installed a custom rom 1st of all... My 1st and biggest mistake.
Anyway, i am unable to install any of the sense based roms on my HTC ONE X, and after googling and reading through xda i found out that i have to have a exact version of stock rom and if i want custom sense based rom, it should also be baked/based upon stock ROM. which left me with no options, i install cm10 which i hate by the way. it sucks! has too many bug for me to use... i ended up flashing my HOX with MIUI Jellybean Version, which seems to be working good with me but has a few bugs here and there. still so much better than the CM10.
And eventually i want the HTC Sense back! custom or stock, whatever it can be....
so if im missing something here... can anyone help me out if RUU for HTC ONE X version 2.17.709.7 available anywhere ?
if there is pls share it with us!
Thanks!
I have finally found the 1.29.751.12 RUU for HTC__621
I've successfully installed it on my phone & I'm now back on stock, also the OTA updates are installing fine.
I've put this on my drop-box account for now, will try & get a more permanent link soon.
https://dl.dropbox.com/u/20212969/R...Radio_1.1204.107.14_release_261363_signed.exe
(Just a quick note, as of this post, its still uploading & as its 600Mb try again in a few hours)
EllisDee80 said:
I have finally found the 1.29.751.12 RUU for HTC__621
I've successfully installed it on my phone & I'm now back on stock, also the OTA updates are installing fine.
I've put this on my drop-box account for now, will try & get a more permanent link soon.
https://dl.dropbox.com/u/20212969/R...Radio_1.1204.107.14_release_261363_signed.exe
(Just a quick note, as of this post, its still uploading & as its 600Mb try again in a few hours)
Click to expand...
Click to collapse
Hi, I have also same CID number HTC__621. I just want to ask how did you return your m8 to stock? What tools did you used, is External Sd card needed? I really need to return my m8 to stock so that I can update my phone to OTA. How is it done?
Because I got a problem, when i was in the process of software update thru ota it got interrupted, as a result I lost access to my main camera. So I'm thinking that returning my m8 to stock and update my m8 to the latest OTA would solve my problem.
Thank you!
First thing to note is I had a HTC One X.
The process is simple, download the file on a Windows computer, connect the phone via usb run the exe.
Simples
My z00ad (ze551ml) dead severals days ago. Right now it just showing 4 colors bar after 2 times vibration.
Why dead?
Upgrade to MM by manual update (placing MM firmware in internal storage and automatically update OS) then after I found many bugs in wifi connection & bad performance, I decide to downgrade it to LL again using xFSTK downloader using 3 files which is fnx dwr, ifwi, image os files from amtech.vn. The proces was success until FW & OS download,, but not directly go to bootloader screen after 4 colors bar.
Trying button combinations, replug power pin, trying different cable & PC and OS (win7, XP, win8) trials for 5 days straight but still fail (300~ trials).
I surrender to ubrick with xFSTK 1.7.0 and trying to use Intel Phone Flash Tool 5.5.2.0. Because this software also have xFSTK feature and GPflash setting
I already try to flash with RAW files (open it with winrar, unrar and found flash-ramdump.xml) but unfortunatelly Intel Phone Flash Tool say:
02/09/17 12:15:53.597 ERROR : Automatic reboot is not supported on this device, please reboot the device manually
02/09/17 12:15:53.597 ERROR : [Port 0/1/1] Failed to reboot the device
preview error using Phone Flash Tool 5.5.2.0
i.imgur[dot]com/xLbJFci.jpg
Maybe I have to flash using firmware.zip not raw files. But I cant find flash.xml in severals firmware from asustek.
I need an information about what firmware which have flash.xml in the zip file? (not RAW firmware), because I need this file for flashing.
Please help
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !
Hello together,
after many tries to get my nokia 3.2 rooted, i end up now with a black screen.
Only the Qulacomm mode is working.
Get anyone managed to flash the stock firmware with QFIL provided from the rooting thread?
I always end up with "sahara fails".
Every help is welcome!
Thanks!!!!
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
page1875 said:
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
Click to expand...
Click to collapse
please do, i encountered a similar problem.
HowTo Flash STOCK 00WW
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
page1875 said:
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
Click to expand...
Click to collapse
Thank you for your reply, it seems that your problem is more complicated than mine.
I have a global variant with 00WW software and i attempt to root the phone. I successfully flash the patched boot.img and had root access. However wi-fi didn't work after that.
Since before flashing the patched boot.img my phone was running on a different firmware from the one that boot.img was extracted from, so i think that was the problem.
I attempted to use QFIL to flash my phone back to 00WW_15 and it failed half way, bricked my phone.
Normally you can use the EDL Mode every time.
My phone only showed black screen and it was always possible to connect in EDL Mode and flash again.
Did you try to flash again? What happens then?
Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
Click to expand...
Click to collapse
What did you mean by Flash the given image ? Was it flash the firmware package with QFIL ?
My main problem is flashing, it always failed half-way and the error log reported that needed files were missing from the package.
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
page1875 said:
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
Click to expand...
Click to collapse
@update:
Also the files "demoapp.img", "dp_AP_signed.mbn" and "dp_MSA_signed.mbn" are missing.
Remove them from the XML file and try again!
@update
Okay QFIL still failed half-way but i manually flash the user images and my phone boots normally now
Hello,
my nokia 3.2 europe variant wont boot up its stuck in fastboot mode. What can i do to bring it back?
I get this: FAILED (remote: partition table doesn't exist)
P.S. if i do a fastboot reboot it boots back into bootloader
I also had this problems for many many times and don't know what went wrong when this happens.
The only thing that helped was flashing the complete firmware again in EDL-mode.
You can try first to flash only the 5 user-images with fastboot, which i mentioned before in this thread.
I uploaded this files for you, because you don't will find the europe files in internet yet.
Here is the link:
https://transfernow.net/81iti7q21s0s
Good luck!
Hi,
Thank you very much. Is this the complete Firmware? (All Images from Device) Another question: I couldnt Access the recovery System. Did you have the same Problem when your Nokia didnt boot up and was stuck in Bootloader? So is this normal that the recovery is unaccessible?
Yes, that also happens sometimes with my phone.
No, that are not all firmware files, which you need to do a full EDL-Flash.
But with this files you can first try a fastboot flash!
If it does not work, you can take all the other files from the Global-Stock-Firmware, given in the thread https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206.
Delete the 5 files with the same names, flash the Global-Stock-Firmware in EDL-Mode, with QFIL or QDL, (without the 5 files) and in the following flash the 5 europe-image files with fastboot.
Thanks, ive sent it in and got Friday a 00WW Variant of the device back. I will upload those User images for 00EEA to my Google drive so that anyone who needs those files can download them
hello
i wanted to install custom rom and i bricked my phone. i lost recovery mode and i have only fastboot mode .but can not write any img file for example twrp.img beacuse show this error : FAILED (remote: partition table doesn't exist). can please anyone help me.
thank you very much
thanks so much i was able to put my phone back to life. i had almost given up.
smure said:
thanks so much i was able to put my phone back to life. i had almost given up.
Click to expand...
Click to collapse
Hello to ervery one
how you flashed your phone. can you please guide?
i am also stucked in fastboot mode after rooting.
damn... I've been finding on how to restore the wifi and sound because I uninstalled magisk and it failed. I don't think I can thank you enough for this post.
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Did you got the solution? Please help me!!!!!!!
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Hi,
I have the same problem.
Any chance you could share the method of how you managed to connect otg to transfer the ozip file? I also only have access to stock recovery and the fastboot mode.
I have the stock rom in zip file version which i am absolutely certain works because i have used it before but i can't install a custom recovery no matter what i try.
If possible could you also share the ozip file and the odp file?
Thank You!
I just wrote unbrick instruction here:
[GUIDE] [RMX1901] Unbrick & Install Android 13 Custom ROM
The guide is for a Chinese version of the phone. But might give you an idea for the global version. History: I was on the latest official ROM. But I was already unlocked the boot. Then I tried to install a custom ROM and failed. Because TWRP for...
forum.xda-developers.com
And you could find some information that I found from there.