Develop Bugs

|GUIDE| PC Does Not Recognize Note 2

If you get the errors that state that your phone is not recognizable or the drivers on your new PC is
A. Cannot be found
B. Any other message that doesnt state "Your Device Is Ready To Be Used"
Then follow this guide
1. This is really simple and easy, CHANGE THE CABLE. Maybe the cable you are using cannot transfer data correctly or its just broken or it just doesn't like you.
2. Some have reported that using a USB 3.0 port on the PC in question may not work correctly. Try using a USB 2.0 port instead if possible.
3. Now this is what works the best if you use custom cooked roms.
-Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!)
-When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
-At the bottom there is a button that says Qualcomm USB. Click on it.
-In that menu click on MTP + ADB option.
-Save and reset.
-Wait for your phone to restart.
-Plug the micro USB cable to the Note 2 and the the other end to your PC or Mac
-Let your computer down load and install drivers.
-Once installing is done, unplug then replug phone.
-There should be a USB symbol on your phone in the status bar - click on it. It should ask if you wsnd to use mtp or ptp. Click MTP
-At this point your PC should open the phone’s folders in explorer similar to the screenshot above.
Do a little dance, make a little love, get down tonight.
i do not take credit finding all of this by my own, i used google.

Cant access USB debugging

As stated, I cant acess usb debugging.. I've already connect my phone to pc but it just only show charging.. I also cant copy file to my pc.. what is the problem here? :crying::crying::crying:

panha510 said:
As stated, I cant acess usb debugging.. I've already connect my phone to pc but it just only show charging.. I also cant copy file to my pc.. what is the problem here? :crying::crying::crying:
Click to expand...
Click to collapse
HTC manager also wont recognize my phone..

panha510 said:
HTC manager also wont recognize my phone..
Click to expand...
Click to collapse
It was written so many times on XDA Forums, that your question is quite a surprise:
Open Settings, then go to phone details (where u can see kernel, Android-version etc) then just tap your Build number enough times until you're developer! Then enable USB Debugging...

bratusm said:
It was written so many times on XDA Forums, that your question is quite a surprise:
Open Settings, then go to phone details (where u can see kernel, Android-version etc) then just tap your Build number enough times until you're developer! Then enable USB Debugging...
Click to expand...
Click to collapse
I've already know that, it is when I plugged my phone into the computer, the battery indicator is charging, but the USB connection never happens.

panha510 said:
I've already know that, it is when I plugged my phone into the computer, the battery indicator is charging, but the USB connection never happens.
Click to expand...
Click to collapse
System? Win XXX, Linux...
HTC Drivers?

bratusm said:
System? Win XXX, Linux...
HTC Drivers?
Click to expand...
Click to collapse
windows 7, i already installed the htc driver..

If you can't access it, go into your settings app on your phone
Open Developer Options and click the checkbox that says
Code:
USB Debugging
If it still doesn't work, install HTC Sync Manager (if not installed already)
Restart your phone into the bootloader (by holding [Vol Down] + pressing [Power] for a second, still holding [Vol Down]
Select 'Fastboot' at the menu that shows up
Plug in your phone, ignore HTC Sync Manager, open a command prompt (admin) by hitting [WIN] + [X], then select
Code:
Command Prompt (Admin)
Once you have done that, cd to your directory of the adb and fastboot executables, like this:
Code:
cd "C:/[your directory]/"
Then
Code:
adb devices
If adb detects that the service isn't running, it'll start it then search for your device. If it finds it, you're set to use the fastboot commands for whatever you want
Good luck guys!

Z1C power button is broken, need to turn on the phone

Hello,
My Z1C's power button have stpped working and currently my phone is off. I'm not sure if debuggin is enabled (and can't find proper guide how to turn it on using debugging)
Can anybody help me please!

my power button is also broken and here is how I boot the phone when it turns off
* debugging should be turned on and ADB drivers installed on the PC
while pressing the vol up button connect the usb cable to the phone (other end already connected to the PC)
the notification light should turn blue
start the ADB prompt on PC
run command adb reboot

karamancho said:
my power button is also broken and here is how I boot the phone when it turns off
* debugging should be turned on and ADB drivers installed on the PC
while pressing the vol up button connect the usb cable to the phone (other end already connected to the PC)
the notification light should turn blue
start the ADB prompt on PC
run command adb reboot
Click to expand...
Click to collapse
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: no devices/emulators found
It get's blue light, I make a location adress to platform-tools, then adb reboot and get this message
I got this message. Can it be it doesn't recognise my phone?
i've used file transfer quite a lot, it should have autoinstalled drivers of my phone

TasKitas said:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: no devices/emulators found
It get's blue light, I make a location adress to platform-tools, then adb reboot and get this message
I got this message. Can it be it doesn't recognise my phone?
i've used file transfer quite a lot, it should have autoinstalled drivers of my phone
Click to expand...
Click to collapse
Maybe it's because you didn't enable debuging in the dev options but thats another problem.
Try googling the error message, maybe you'll find a solution

karamancho said:
Maybe it's because you didn't enable debuging in the dev options but thats another problem.
Try googling the error message, maybe you'll find a solution
Click to expand...
Click to collapse
Probably it's off, thanks for suggestion

TasKitas said:
Probably it's off, thanks for suggestion
Click to expand...
Click to collapse
you should also try the fastboot reboot command

Can anybody help with my 'bricked' LG G Pro Optimus?

I followed all the instructions on the Internet by donwloading the flash tool, kmz file, and everything else. I followed all methods and none of them work! When I press Install button when everything is set up in the flash tool, the support tool window does appear, and it always says 'The computer and your phone has been disconnected. Please try again by plugging your phone again." Are there any solutions to this?
p.s. my phone is currently bricked which means that I cannot boot, and I did not enable USB Debugging in Developer Options.

You need to install LG drivers on PC, then you need to enter download mode on your phone. Phone turned off then hold volume up + volume down and connect it to PC via USB cable. It will show download mode on the screen. Only then you can flash new kdz file using LG Flash Tool. If I remember correctly flash tool will show error connecting to server but just ignore it (do not press ok) and just wait for it to finish. It will finish when your phone will power itself on into language configuration etc.

Doesn't work
The message does pop up saying that the USB connection is not properly plugged with my LG G Pro. It says nothing like Server Error

Can you see this on phone screen?
http://tech2mech.com/wp-content/uploads/2015/03/download-mode-lg-g-pro-f240.jpg
---------- Post added at 08:23 AM ---------- Previous post was at 08:19 AM ----------
second thing you need LG USB drivers install on your PC:
http://www.lg.com/us/support-mobile/lg-LGE980

1. Run flash tools under administrative mode and Windows 7 compatibility mode if on windows 8+. Even better, use it on Windows 7 machine.
2. don't use USB3 ports.
And make sure you're in download mode, it doesn't need usb debugging to work, but you have to boot it into download mode to be able to use flash tool.

Fastboot mode Troubleshooting [windows users]

Troubleshoot guide for updating the adb and fastboot drivers manually in a PC running any version of windows​
First, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
Pre-requisites:
* PC running windows 7/8/10
* Internet connection (just 20MB)
* Working USB cable
Steps:
(1) Download the [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 from XDA
Link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) Install it with "Y" confirmation for all 3 options and reboot the PC
(3) Disable the internet connection of your pc
(4) Reboot your phone to fastboot mode and plug it to your PC's USB 2.0 port (important)
(5) Open device manager on PC and scan for hardware changes from the option if your device is not listed already
(6) If it shows 'Asus android device' -> "ASUS Android Bootloader Interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) Now scan for hardware changes (magnifying glass icon)
(8) It will show 'Android' with an ! symbol
(screenshot 3)
(9) Right click -> Update driver -> Browse my computer for driver software
(10) Choose "Let me pick from a list of available drivers on my computer"
(11) Choose "Android device" or "Asus android device" or similar option and confirm it with Yes or Next option
(screenshot 4)
(12) A warning will pop up, press 'Yes'
Done
(13) Go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.

Nice... Thanks for the guide... Many people needed it... Was about to make one myself...

Great. Many many thanks bro

kickyvivi said:
troubleshoot guide for updating the adb and fastboot drivers manually in a pc running any version of windows​
first, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
pre-requisites:
* pc running windows 7/8/10
* internet connection (just 20mb)
* working usb cable
steps:
(1) download the [official][tool][windows] adb, fastboot and drivers - 15 seconds adb installer v1.4.3 from xda
link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) install it with "y" confirmation for all 3 options and reboot the pc
(3) disable the internet connection of your pc
(4) reboot your phone to fastboot mode and plug it to your pc's usb 2.0 port (important)
(5) open device manager on pc and scan for hardware changes from the option if your device is not listed already
(6) if it shows 'asus android device' -> "asus android bootloader interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) now scan for hardware changes (magnifying glass icon)
(8) it will show 'android' with an ! Symbol
(screenshot 3)
(9) right click -> update driver -> browse my computer for driver software
(10) choose "let me pick from a list of available drivers on my computer"
(11) choose "android device" or "asus android device" or similar option and confirm it with yes or next option
(screenshot 4)
(12) a warning will pop up, press 'yes'
done
(13) go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.
Click to expand...
Click to collapse
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )

Divyajeet90 said:
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )
Click to expand...
Click to collapse
I am having same problem... Did you find any solution for it?

kickyvivi said:
Troubleshoot guide for updating the adb and fastboot drivers manually in a PC running any version of windows​
First, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
Pre-requisites:
* PC running windows 7/8/10
* Internet connection (just 20MB)
* Working USB cable
Steps:
(1) Download the [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 from XDA
Link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) Install it with "Y" confirmation for all 3 options and reboot the PC
(3) Disable the internet connection of your pc
(4) Reboot your phone to fastboot mode and plug it to your PC's USB 2.0 port (important)
(5) Open device manager on PC and scan for hardware changes from the option if your device is not listed already
(6) If it shows 'Asus android device' -> "ASUS Android Bootloader Interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) Now scan for hardware changes (magnifying glass icon)
(8) It will show 'Android' with an ! symbol
(screenshot 3)
(9) Right click -> Update driver -> Browse my computer for driver software
(10) Choose "Let me pick from a list of available drivers on my computer"
(11) Choose "Android device" or "Asus android device" or similar option and confirm it with Yes or Next option
(screenshot 4)
(12) A warning will pop up, press 'Yes'
Done
(13) Go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.
Click to expand...
Click to collapse
Hello, I followed your mentioned steps but in my drivers its showing "Samsung Android Device" is that okay for my asus zenfone max pro m1 device? Or there is one portable device option, is that it?

Hi guys, specially opened an account because of this issue. I am unable to run the fastboot devices command even after following all the aforementioned steps. Phone screen turns black and a message appears on the top left stating "press any key to shutdown", while the fastboot devices command gives a "??????? fastboot" response on my PC. PLEASE HELP!

kickyvivi said:
(12) A warning will pop up, press 'Yes'
Done
Click to expand...
Click to collapse
After I completed all the steps, my phone showed on screen "press any key to shutdown" and even in device manager it shows android ADB interface as hidden. Help please. Rebooting again to fastboot mode doesn't help because it shows the same screen "press any key to shutdown" on reconnecting with PC.

May Asus x01bd can't in to the mode fastboot..how to solved it?

Kajin660 said:
May Asus x01bd can't in to the mode fastboot..how to solved it?
Click to expand...
Click to collapse
Well i learned this from somewhere but actually you need to turn off the secure boot in your PC from the BIOS. That's what helped me do it

D0CT0RFATE said:
Hi guys, specially opened an account because of this issue. I am unable to run the fastboot devices command even after following all the aforementioned steps. Phone screen turns black and a message appears on the top left stating "press any key to shutdown", while the fastboot devices command gives a "??????? fastboot" response on my PC. PLEASE HELP!
Click to expand...
Click to collapse
this same with me,, n i donk know how it is??
my phone asus x01bd

Nightmonkeyps said:
Well i learned this from somewhere but actually you need to turn off the secure boot in your PC from the BIOS. That's what helped me do it
Click to expand...
Click to collapse
can u explaining me?? sorry i dont understand what u mean??

Kajin660 said:
can u explaining me?? sorry i dont understand what u mean??
Click to expand...
Click to collapse
Well you know how there's a BIOS in your PC which contains the basic commands required to run a computer. There is a setting called secure boot inside your BIOS. You need to turn it off and then install fastboot tools. To open the BIOS, repeatedly press F10 or F8 on your computer while it is opening. This is how it worked for me atleast

Divyajeet90 said:
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )
Click to expand...
Click to collapse
this happen to me,, and i have solved this,,
step:
1. U must flash ur Phone via qfil,(*)
,than u will lost ur IMEI and SN will Change to 111111,, but dont worry thats can be back again
2. next step is u must recover ur IMEI and SN back (in tele group u wil found the step) after that U just flash stock firmware modified (via TWRP/ORFOX)n then ur phne willl back normally
Note : (*) in firmware for flash via qfil replace the recovery.img with twrp/orfox (rename To "recovery.img") this will bring u a twrp/orfox recovery after flash via qvil
i hope this can help..