Samsung Galaxy Tab 3.0 SM-T217A - Galaxy Tab 3 Q&A, Help & Troubleshooting

hello, a while back i messed with my build prop file, if anyone can send a screenshot of all their build prop for the SM-T217A variant info so i can fix mine, that would be great. i messed with the build prop to change my model name and stuff but tweaked it a bit much. now gapps is trying to install its version for the samsung galaxy 4 and i deleted the build prop backup file. thanks

Related

[TING] Flashable Zip - Fixed LTE/eHRPD for CyanogenMod

**EDIT** Unless you're running an older version of CM, use the version 3 zip.
I just wanted to share this in case it helps anyone else with a GNex on Ting service.
I noticed the stock Google 4.2.1 rom on my GNex connected fine to eHRPD and LTE, but when I flashed CM10.1 I could only get EVDO. So I used an APN backup utility to get the proper APN settings from stock, tweaked them to work with CM, and created a recovery-flashable zip file.
These APNs fixed both LTE and eHRPD for me. It also sets the Ting MMS URL.
The zip file is attached to this post. Flash it over an already-installed CM rom, and again any time after you flash a rom update. I don't know if these APNs will work for other LTE devices on Ting besides the Galaxy Nexus, but I suspect they will.
Uninstall is as simple as re-flashing your CM rom, or restoring your original "/system/etc/apns-conf.xml" file with a root file explorer app (if you saved a backup before flashing this).
Another thing I did was set eHRPD to "On" under *#*#3282#*#* -> Edit -> Others/More, though I'm not sure how much difference it makes.
**EDIT**
The zip here:
https://help.ting.com/entries/423580...d-4-4-Kit-Kat-
... fixed my 3g issues in the latest CM11 nightlies. He's got some extra lines for bare CDMA (non-LTE/eHRPD).
New version for Android 4.3. Credit to @poo706 for figuring out the new APN version number change. Very little testing on this but seems to work for me. YMMV!
t3rmin said:
New version for Android 4.3. Credit to @poo706 for figuring out the new APN version number change. Very little testing on this but seems to work for me. YMMV!
Click to expand...
Click to collapse
I appreciate the shout out!
[poo]
After 3 different calls to Ting trying to figure out why my Note 2 could not connect to LTE, this zip did it! Thank you!
Version 3
Here's my latest Ting APN zip. This reflects some cleanup CM did with Sprint APNs in recent months. Works great on my GSIII and my wife's Gnex.
Hello.
Would you be so kind as to assist me with something like this for the carrier Ringplus?
t3rmin said:
Here's my latest Ting APN zip. This reflects some cleanup CM did with Sprint APNs in recent months. Works great on my GSIII and my wife's Gnex.
Click to expand...
Click to collapse
That also works great on a Nexus 5 running an early unofficial CM.
booda3000 said:
Hello.
Would you be so kind as to assist me with something like this for the carrier Ringplus?
Click to expand...
Click to collapse
Copy the APN here into System > etc and replace the current apns-conf.xml
Be sure to set the permissions to rw-r--r--
wstout12 said:
That also works great on a Nexus 5 running an early unofficial CM.
Click to expand...
Click to collapse
Awesome! It worked/works!
CM 10.2 with LTE on Ringplus.
Long story but back to using my samsung epic 4g. Does anyone know where i can get apns to restore data for it. Running cyanogen mod 10.2
t3rmin said:
**EDIT** Unless you're running an older version of CM, use the version 3 zip.
Click to expand...
Click to collapse
Can you make an updated flashable zip for CM11 ( Android 4.4 KitKat )?
madsc13n41s4 said:
Can you make an updated flashable zip for CM11 ( Android 4.4 KitKat )?
Click to expand...
Click to collapse
4.3 zips will work on 4.4.
[poo]
Try this for March 2014 CM11 nightlies
The zip here:
https://help.ting.com/entries/42358068-LTE-MMS-APN-Fix-Android-4-4-Kit-Kat-
... fixed my 3g issues in the latest CM11 nightlies. He's got some extra lines for bare CDMA (non-LTE/eHRPD).

[Q] Unified Toolkit v7.0

This is concerning the AT&T Version JRO03L.I747UCDK3 on Android 4.1.1. After the initial steps of selecting your device and typing the number, it takes you to that downloading screen. Here it says that the file I747.zip could not be opened as an archive. Try again later. I thought it could be my program so I uninstaled 7 Zip and installed Winrar but the same error message consistently comes up and I dont know how to fix it. If anyone else has had this happen to them, I would appreciate the help. Thanks.
ATT Galaxy S3 Unified toolkit 7.0 for 4.1.2
Not sure if I'm in the right place to post this? But here goes, Is there Unified toolkit 7.0 for ATT Galaxy S3 running 4.1.2?
Version 7.5.0
Badfish63 said:
Not sure if I'm in the right place to post this? But here goes, Is there Unified toolkit 7.0 for ATT Galaxy S3 running 4.1.2?
Click to expand...
Click to collapse
Version 7.5.0
http://www.skipsoft.net/?p=969

how to root s4 mini gt i9190?

hi where do i find the files to root this phone? i found the files for it on hxxps://autoroot.chainfire.eu/ but the build number is different than mine. does my phone haveing a different build number than "KOT49H.I9190UBUCNG1" make a difference? havint rooted anything before any help would be great thanks
If you want a easy root try http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 install for android and press root.i rooted my 9195 and its work
Follow the link - http://forum.xda-developers.com/showthread.php?t=2398143

Need help editing build prop for memory editor(s) and PIE error

Hello I'm using:
ASUS ZenFone2 (fully rooted w/ SuperSU Pro)
2GB RAM/16GB HD
Android Lollipop 5.0
Model: ASUS_Z00AD
CPU: Quad Intel 1.8 GHz
I'm trying to use a game memory editor called SB Game Hacker. I tried using the latest version 3.1 and the app crashes as soon as you try to open it. I then tried to get version 3.0 and then it hangs on the "requesting root privileges". I went into SuperSU to check logs and it states "error: only position independent executables (PIE) are supported. I then tried version 2.6.3 and then it says I need root privledges...Lol
Is there anyway I can edit my build prop to make this app to work or bypass the PIE error on zenfone2? also which is the correct build prop I make edits to?
build.prop OR build.ze551.dual.1p8GHz.prop ?
If anyone can help me make this work I would greatly appreciate it. :good:
Thanks for your time,
Jay

Unable to purchase Themes in Samsung store

I recieve error cose S2000/P/75ZRD/U400000
I have an G928T from TMO and am running Nexify Rom for the Note 5 and SkyHigh kernel for the for g928T. I have made the changes to the buildprop so the model shows the correct number. Everytime I try to purchase a theme I get that error code.
Any way to fix this?

Categories

Resources