Related
Good Morning,
I picked up a fire tv box yesterday and I am having trouble connecting it to my onkyo amp.
I plug it directly into my TV and it works fine, but when plugging it into my amp, all i get is a blue screen.
I tried altering the display from auto down to 1080p 50/60hz, but still nothing.
The box came pre loaded with xbmc, would it be something in there that is causing it ?
Has anyone else had this issue ? Any ideas on how i can get round it ?
Pete
I have just noticed that i put this in the wrong forum, please can a mod move it to the correct one. Thanks
theINSKIP said:
Good Morning,
I picked up a fire tv box yesterday and I am having trouble connecting it to my onkyo amp.
I plug it directly into my TV and it works fine, but when plugging it into my amp, all i get is a blue screen.
I tried altering the display from auto down to 1080p 50/60hz, but still nothing.
The box came pre loaded with xbmc, would it be something in there that is causing it ?
Has anyone else had this issue ? Any ideas on how i can get round it ?
Pete
I have just noticed that i put this in the wrong forum, please can a mod move it to the correct one. Thanks
Click to expand...
Click to collapse
I just noticed the part about xbmc being preloaded on your firetv? I'm guessing you bought this used?!? If so, that might be part of the problem.
expose11 said:
I just noticed the part about xbmc being preloaded on your firetv? I'm guessing you bought this used?!? If so, that might be part of the problem.
Click to expand...
Click to collapse
I run mine thru an Onkyo and it works fine. I pass thru DTS via XBMC. Great. You should really ask this question on the Onkyo forums and provide way more information about your setup.
jmerrilljr2 said:
I run mine thru an Onkyo and it works fine. I pass thru DTS via XBMC. Great. You should really ask this question on the Onkyo forums and provide way more information about your setup.
Click to expand...
Click to collapse
Not sure if there is some confusion but I was responding to the OP. I was asking him if he might have bought his AFTV used since it does not come with XBMC installed. And not to keep this going or anything, but I can guarantee if he asked his question in Onkyo forums their response would be for him to go to AFTV, XBMC, or possibly XDA (although I doubt it) forums for an answer.
expose11 said:
it does not come with XBMC installed.
Click to expand...
Click to collapse
Right the FireTV doesn't come with XBMC stock.
I have mine hooked up to an Onkyo NR414 (I believe) and it works fine. ALTHOUGH there were one or two HDMI cables that would give me a screen about HDCP, not sure if it was a blue screen. Try different HDMI cables.
Hi guys
Thanks for your help.... Spend this morning swapping hdmi cables round. Now it works a treat !!
theINSKIP said:
Hi guys
Thanks for your help.... Spend this morning swapping hdmi cables round. Now it works a treat !!
Click to expand...
Click to collapse
excellent. Another thing to pay attention to is which box is powered up first. The order that seems to work best for me is TV, then amp, then FireTV.
I have the FireTV box. I installed the wireless remote app for my android and it worked ok. Then I realized the remote itself isn't working at all. I tried unplugging the cord and rebooting. Nothing.
Any suggestions?
Fresh batteries. The remote is a battery hog. Sometimes the screen will tell yo when the batteries are low, but several times I have had to switch batteries without being warned of low batteries.
you didn;t happen to turn off bluetooth by accident, did you?
I have the same problem. I have replaced the batteries but still no bueno. The remote status is battery offline. Reboot the Box, still no dice. Where can I check to see that the bluetooth is still enabled?
spyder3 said:
I have the same problem. I have replaced the batteries but still no bueno. The remote status is battery offline. Reboot the Box, still no dice. Where can I check to see that the bluetooth is still enabled?
Click to expand...
Click to collapse
Maybe you need to re-pair the remote. Just a guess. Anyway, see this: http://www.amazon.com/gp/help/customer/display.html?nodeId=201452760.
Yeah, I tried that. No dice. I contacted Amazon and they are sending me a replacement remote. Apparently this problem is becoming common and a replacement remote fixes it.
Have you tried pairing another bluetooth device like a keyboard, mouse, headphones, gamepads or speakers to ensure your bluetooth controller on the Amazon device hasn't died?
Sent from a Freedompop HTC Evo 4G
I contacted Amazon and they sent me a replacement remote, next day. It works perfectly. I guess the remotes just die sometimes.
spyder3 said:
I contacted Amazon and they sent me a replacement remote, next day. It works perfectly. I guess the remotes just die sometimes.
Click to expand...
Click to collapse
do you still have that remote? the same thing happened to me, and I was able to fix it.
shutterslaps said:
do you still have that remote? the same thing happened to me, and I was able to fix it.
Click to expand...
Click to collapse
Can you let us know what the issue was and how you fixed your remote? It could be helpful to myself and others who may run into a non working Fire TV remote.
i had same issue, i had to get another remote
mjbxx said:
Can you let us know what the issue was and how you fixed your remote? It could be helpful to myself and others who may run into a non working Fire TV remote.
Click to expand...
Click to collapse
I was trying to pair a ps4 controller with the sixaxis app. That's exactly when the remote stopped working. I'm assuming it was because the app was messing with the systems bluetooth connection. Luckily I had another remote already setup (a Rii Mini 2.4GHz Wireless Touchpad Keyboard.) I went back into the sixaxis app, clicked on STOP, and exited the program. I then went into the settings.apk (not the one that came with the system) went into BLUETOOTH, and unpaired the Amazon Fire TV Remote. Then I repaired the Amazon Fire Tv Remote through BLUETOOTH in settings. The remote still didn't work, but I was now able to go into the stock settings app that came with the system, click on CONTROLLERS then Amazon Fire TV Remotes, Add New Remote, and hold down the Home button on the remote for about 5 seconds, and it showed up in the list of Discovered Remotes. Once I clicked on the remote, it started working.
Now I may or may not have added extra, unnecessary steps, but that's exactly what I did to get it working again.
Oh and I highly recommend the Rii Mini Wireless Touchpad Keyboard. It's small, has a full keyboard & touchpad that is perfect for using as a mouse pointer. It also comes with a wireless dongle. I only wish I could map a HOME button press to one of the keys on it. Oh and it was plug and play! I connected the dongle, turned on the remote, and worked right away. No pairing was needed.
**I take back the recommendation for the Rii Mini Wireless Touchpad Keyboard. Now it's sporadically acting like I'm holding down buttons and it's really quite annoying. For example, I would type out TEST, and when I would get to the 'E', it'll input 'EEEEEEEEE' until I press another button. I have a clear line of sight to the dongle, and it's two feet away. After scouring the internets, I read some good reviews about the FAVI Wireless Keyboard, and ordered it. ($35.57)
Help! I lost the remote for my fire stick, so I downloaded the remote app on my iPhone. It worked great for a day, then couldn't find the fire tv stick at all. I tried everything to fix it, restarting my phone, unplugging the fire stick, restarting wifi, deleting and renown loading the app, and nothing worked. I tried using some different remote apps, and none of them picked up the fire stick, so I'm assuming it's a problem with the fire stick itself. If the Bluetooth on the fire stick stopped working, how do I fix it? A friend bought this for me and set it all up so I don't have a clue how to work it without the remote, please help!
I have similar problems with the Amazon Fire TV and Fire Stick remotes. There is a known issue that other Bluetooth-enabled devices within range of the Amazon hardware can disrupt the connection with the remote (like a laptop, tablet, etc.). I learned this directly from Amazon Tech Service. They also sent me a second remote which still has the same problem.
I keep a Logitech Unifying dongle plugged into the USB port on the Fire TV and use a mini-keyboard remote or a wireless full-size keyboard made for Google TV, which works all the time even when the Amazon remotes stop working. Unfortunately, this "fix" won't work with the FireStick since there is no USB port.
I have a Logitech Revue, Amazon Fire TV, Amazon Fire Stick and a Roku3 box. The Roku3 is the only one that has no real issues, always works and the best features. Other than that, my Vizio M-series TV has Yahoo! Smart TV and is sufficient for most streaming without a box.
Wukong romote app should work since it works over wifi. You probably need to just toggle bluetooth off and on.
Sent from my LG-LS980 using Tapatalk
spyder3 said:
Yeah, I tried that. No dice. I contacted Amazon and they are sending me a replacement remote. Apparently this problem is becoming common and a replacement remote fixes it.
Click to expand...
Click to collapse
Seems to be a very common problem. I had this problem with my first-gen FTV as well. Customer service didn't even bother asking any questions and had it replaced promptly. Hopefully it doesn't happen with my FTV2 remote.
I fixiti removing the remote from the bluetooth devices and leting the firetv connect again. So far 2 month and no issues
mjbxx said:
Can you let us know what the issue was and how you fixed your remote? It could be helpful to myself and others who may run into a non working Fire TV remote.
Click to expand...
Click to collapse
When I spoke with the Amazon CSR, he had me do the following
1) Remove the batteries from the remote
2) Hold the middle circle button AND the home button at the same time (keep holding for the next steps)
3) Disconnect HDMI and power cable from Fire TV
4) wait 30 seconds
5) Reconnect HDMI and Power Cable
6) Let go of remote buttons, re-insert batteries into remote
7) voila, remote worked again.
These steps basically reset the bluetooth settings on the Fire TV. After troubleshooting, I think the issue may be because of bluetooth interference from my Amazon Echo, cell phone and laptop that are all connected in the same room. Hope this helps! :highfive:
Is the FireTV remote the same as the FireTV Stick remote? I've ordered a new TV box to replace my stick and want to reuse the old remote. I'm not bothered about the voice features.
Good third party remote for android tv and amazon fire tv, and I find the mouse can be use in this app called CetusPlay, you can find it on google play store
and there is another on called wukong tv remote, but know it seems not working in the mouse.
I put this on the Kodi Genesis forum but have had no luck so thought I would see if anyone here has come across this.
Ok guys, have a fire TV running genesis 5 and kodi 14.1 with no problems at all. Decided yesterday I would buy a fire TV stick. Installed kodi 15.1 on to it and genesis 5. Went to a tv show I watch and came up no streams available. Went to the exact same tv show on my fire TV and instantly all links came up! They are both in the same room connected to the same router.
I decided I would try downgrading the fire stick to kodi 14.1 so I had the exact same setup as the fire TV box. Still no streams available! How can this be happening? It's doing my head in! Any help guys would be greatly appreciated. By the way I have a very strong wifi signal on my stick.
Thanks
Darren
I have a similar problem! Except it's with IceFilms. When clicking on a movie, all I see are three dots (one up folder). I'll keep an eye on this thread. I hope you get it working!
I just got my fourth fire stick yesterday and have the same exact problem. All the other sticks work great, I don't know what they have done. I tried uninstalling and reinstalling with no luck.
Answer Genesis
nitrobanshee said:
I just got my fourth fire stick yesterday and have the same exact problem. All the other sticks work great, I don't know what they have done. I tried uninstalling and reinstalling with no luck.
Click to expand...
Click to collapse
I think I know what the problem is, try changing the view to say a list or poster or go through the view types until the list appears properly.
I have tried changing the views with no luck. It has to be down to the stick. What I have noticed is the stick comes up with "no stream available" in Genesis but it still says working for another 15-20 seconds. I know there are streams available because they come up on my fire TV for this particular TV show. It seems to be timing out or something like that, like it is not finding the streams quick enough then just shows "no stream available". May something to do with speed or memory of the fire stick?
DD33 said:
I have tried changing the views with no luck. It has to be down to the stick. What I have noticed is the stick comes up with "no stream available" in Genesis but it still says working for another 15-20 seconds. I know there are streams available because they come up on my fire TV for this particular TV show. It seems to be timing out or something like that, like it is not finding the streams quick enough then just shows "no stream available". May something to do with speed or memory of the fire stick?
Click to expand...
Click to collapse
I uninstalled everything and hooked it to my other TV using the power cord that came with it. Every thing is great now, I put it on the other TV that had USB for power and it still works on that TV. So I'm not shure if you used the power cable that cane with it or not but use it to program it.
nitrobanshee said:
I uninstalled everything and hooked it to my other TV using the power cord that came with it. Every thing is great now, I put it on the other TV that had USB for power and it still works on that TV. So I'm not shure if you used the power cable that cane with it or not but use it to program it.
Click to expand...
Click to collapse
Do you mean delete kodi from the fire stick then use the power cable to the stick and then reinstall kodi & genesis?
DD33 said:
Do you mean delete kodi from the fire stick then use the power cable to the stick and then reinstall kodi & genesis?
Click to expand...
Click to collapse
I have done this myself, even factory reset the Fire TV Stick and it hasn't worked. So don't be disheartened if this doesn't work! You're not the only one.
I had this same problem and solved it here:
http://forum.xda-developers.com/fire-tv/help/kodi-fire-stick-fewer-steams-kodi-t3370586
Hi I am currently using a gen 2 fire TV and recently signed up to sky. I sideloaded the sky go app using the app from my note 4 and anytime I try to play something on my fire tv I get the HDMI not supported error. I saw the list of working apps thread and it said sky go does work but I always keep getting this error. Any way to solve this?? Maybe a previous version of the app can be uploaded? Any help would be great!
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
mirayge said:
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
Click to expand...
Click to collapse
My fire tv is connected through wifi
i use this apk on my aftv2 (germany)
http://www.netzwelt.de/software-download/37855-sky-go-android-apk.html
Just googled: sky go for android tv
device is connected via lan and it is working, but u need a mouse (btw. it's more easy to navigate)
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
http://gavin-blake.store.aptoide.com/app/market/com.bskyb.skygo/50400000/18293366/Sky+Go
callanish said:
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
can you post a link to the apk you have working please callanish as im having that hdmi not supported message on my amazon 4k fire tv yet my first generation fire tv has the same sky go version and its working
Click to expand...
Click to collapse
Hi can someone please post a working sky go apk
Guys, just install Aptoide It's not a questionable website. It's an alternative to the Google app store and works well with the fire tv. Been using it for years.
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
mollygeorge66 said:
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
Click to expand...
Click to collapse
Just guessing, but I wonder if it's an HDMI HDCP issue you're coming across due to the copyright protection handshake between the fire tv and your tv. I've got two fire TV 1st gen's running on two Sony TV's and 1 fire stick running on a Vizio bedroom tv and need to use a bluetooth keyboard / touchpad with the stick and usb wireless keyboard / touchpad for the Fire TV's in order to make skygo function properly since there's no official Fire TV version, but my only HDMI 'not supported' issue I consistently get with Skygo on the Fire TV boxes and stick is when trying to access Sky news. Every movie, sports, other channels available on Skygo work fine.....except for sky news, and like you, I get that HDMI not supported message when I try to stream it. Also using a proxy to make it all work, but I'm not experiencing a channel wide HDMI 'not supported message' in the app like you're coming across. 5.1.0.47 is the latest app version of Skygo. Hopefully it works for you or you figure out where the problem might be.
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
I'm having to send it back now as i got a system update today and following the update i couldn't connect a bluetooth mouse the powerlight kept blinking or not appearing even when the fire tv was on and then the remote started going mental contacted amazon and they are sending a replacement tomorrow and added bonus I'm getting to keep the remote and they are giving me a £10 credit following the problems hopefully the new one is better
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Comalley2016 said:
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Click to expand...
Click to collapse
just open es file explorer on both the firestick and fire tv which ever has the file you want to send long press it until a tick appears and select send and it will transfer it over
Replacement 4k fire tv arrived today tried sky go again same message hdmi not supported tried it in the tv which original fire tv is and sky go is working but still getting the damn message also can anyone confirm wether the powerlight should be on when using the 4k fire tv as a light only appears when i use the remote just confused as the original fire tv powerlight is on constantly
mollygeorge66 said:
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
Click to expand...
Click to collapse
So, basically what we can surmise from all this is that the Fire TV 2 boxes have aggressive HDCP copyright protection built in to prevent apps like Skygo from functioning. The options remaining, imho, are either A) purchase another Fire TV 1 box used or new if you can find one B) purchase a new Fire TV stick as it's still a version 1 device and I can vouch that it still works with Skygo 2 C) run one of the many Android boxes out there, sideload skygo and do some testing, or D) Do what I did and run a Intel Nuc; (a windows type box) or something similar, and hook it up to a usb Wireless keyboard and run skygo through a browser. That's what I use as a backup option. Yes, you could also use a computer connected with an hdmi cable to a tv, but the Intel NUC, for me, streamlines the process. Probably impractical for your needs, but just want to point out another option. The Point is, unless some other people on the forum chime in telling you that they've gotten skygo to work on the Fire TV 2, and how they've done it, then it might be time to throw in the towel on this one and think about some other options. You know Amazon and Sky are going to continue to make it harder to do what we want, so it might be better to just find a box, like the Fire TV 1 or Fire TV stick and at least get Skygo working again.
For the record, I've got my Fire Tv boxes and stick blocked for any future Amazon firmware updates. I'm thinking that Amazon could introduce an update that prevents the Fire TV 1 and Stick from working with Skygo as well, so better safe than sorry.
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
mollygeorge66 said:
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
Click to expand...
Click to collapse
Sorry. Wish I could have been more helpful.
sry for the 2 years late answer:
you need to set "auto" in display-settings - not 4k/1080pX0/720pX0
Hi guys,
I have a weird problem I cannot solve and it drives me crazy.
My girlfriend and I have an older Philips TV (t315xw02vf). As we enjoy watching Amazon Prime and Netflix, we bought the new FireTV 3rd gen. Not that we needed the newest version, it just wasn't possible to buy an older one via Amazon Germany.
Now the problem: the TV won't recognize the FireTV. It keeps showing "No signal". All HDMI inputs of the TV work, I tried with my laptop and an HDMI cable. The FireTV itself works, too, I tried at my parents house (they have a newer TV). Of course, the FireTV is active, it even gets slightly warm. I also tried to set the resolution to the lowest possible (via my parents TV), but even then the problem stays.
I consulted Google, and it seems there are known problems with HDCP 2.2, but I thought that was only a problem with 4k streaming. Or does the FireTV 3rd Gen use HDMI 2.0 and my TV has only 1.0? Does anybody know a solution? As we are students, the FireTV was quite expensive for us, and buying a new TV is no solution either...
I'd be really grateful for help. Thanks in advance.
Spaceoid