Develop Bugs

[Q] TWRP 2.4.1.0 can't flash ROMs

Ok, so I was on CM10.1 and I wanted to update my nightly, so I downloaded the newest one. I had it on my computer and checked the md5SUM it was clean. Every time I boot into recovery, TWRP 2.4.1.0, and I go to flash any ROM it just says "FAIL" and I can't flash. I've already tried reflashing TWRP but no luck. Any hep?

jamcar said:
Ok, so I was on CM10.1 and I wanted to update my nightly, so I downloaded the newest one. I had it on my computer and checked the md5SUM it was clean. Every time I boot into recovery, TWRP 2.4.1.0, and I go to flash any ROM it just says "FAIL" and I can't flash. I've already tried reflashing TWRP but no luck. Any hep?
Click to expand...
Click to collapse
This happens to me often, by rebooting my recovery, it fixes the issue for me. I'm also on 2.4.1.0.

Wildfire S recovery error

NEED some help. I had TWRP loaded on my Htc Wildfire S. I tried to Flash CM 7.2 but it said FAILED. So I installed CWM through ROM manager. The problem is now I cant get into recovery. When I try to boot in recovery the phone starts up normally. I tried it a lot of times. Still no success. PLEASE help me.!!!

Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here

csoulr666 said:
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
Click to expand...
Click to collapse
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)

ij345 said:
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
Click to expand...
Click to collapse
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager

csoulr666 said:
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
Click to expand...
Click to collapse
Yeah. I did that. I must have only CWM in my cell. I had flashed it through ROM manager.

[Q] rom flashing frustration

Finally rooted my s3, when I first tried to flash cm 10 I was getting an install aborted message. A post on this forum suggested tryong twrp instead of clockwork so I downloaded goo manager. I downloaded cm 10 and gapps through twrp and started by wiping. When I went to flash couldnt find the files for cm 10 so went to restore so I could start over...discovered my clockwork backup wouldnt work with twrp(rookie mistake lol) so reflashed clockwork so I could restore and start over. Redownloaded cm 10 and gapps with twrp checking the filepath for the save this time. Problem is I cant get twrp to be my boot recovery so that I can save a nandroid with it and try flashing the rom.ive tried setting the boot recovery to twrp with clockwork itself,tried rebooting through goo, tried setting twrp to default with rom toolbox, tried rebooting with twrp manager and finally uninstalled clockwork ....no matter what my boot recovery is clockwork .how can I get twrp to load as boot recovery so I can save a backup with twrp and try flashing cm 10? Flashed roms on old devices before and never had this much trouble.

tenpin416 said:
Finally rooted my s3, when I first tried to flash cm 10 I was getting an install aborted message. A post on this forum suggested tryong twrp instead of clockwork so I downloaded goo manager. I downloaded cm 10 and gapps through twrp and started by wiping. When I went to flash couldnt find the files for cm 10 so went to restore so I could start over...discovered my clockwork backup wouldnt work with twrp(rookie mistake lol) so reflashed clockwork so I could restore and start over. Redownloaded cm 10 and gapps with twrp checking the filepath for the save this time. Problem is I cant get twrp to be my boot recovery so that I can save a nandroid with it and try flashing the rom.ive tried setting the boot recovery to twrp with clockwork itself,tried rebooting through goo, tried setting twrp to default with rom toolbox, tried rebooting with twrp manager and finally uninstalled clockwork ....no matter what my boot recovery is clockwork .how can I get twrp to load as boot recovery so I can save a backup with twrp and try flashing cm 10? Flashed roms on old devices before and never had this much trouble.
Click to expand...
Click to collapse
Did u have the latest cwm recovery (6.0.3.6) installed when u originally tried to flash? I have never had an issue with cwm, and until I do, I'm not switching to twrp. Which version of cm 10 specifically were u trying to flash?

DMF1977 said:
Did u have the latest cwm recovery (6.0.3.6) installed when u originally tried to flash? I have never had an issue with cwm, and until I do, I'm not switching to twrp. Which version of cm 10 specifically were u trying to flash?
Click to expand...
Click to collapse
I had the latest version of cwm and I am trying to flash the latest stable release of cm 10, 10.1.2 I believe

tenpin416 said:
I had the latest version of cwm and I am trying to flash the latest stable release of cm 10, 10.1.2 I believe
Click to expand...
Click to collapse
Is it android 4.2.2 or 4.3? Pretty sure u have to update to the latest bootloader for 4.3...

DMF1977 said:
Is it android 4.2.2 or 4.3? Pretty sure u have to update to the latest bootloader for 4.3...
Click to expand...
Click to collapse
After doing some reading I think the abort is caused by having the older ics bootlaoder.ive never had to update one before so im a bit hesitant. ..do you know if I update and try to switch back to my original restore or to a different rom (other than cm 10) Will I have to change the bootloader back again or will I run into a greater chance of problems in the future?

[Q] Won't boot rom or cwm recovery - only download mode

Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?

No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app

Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?

Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?

This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".

vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards

How to keep DualRecovery after flashing CM based rom?

I just noticed a few things. The stock based roms are using the Dual Recovery in their rom, but CM based roms, like Resurrection Remix, uses Cyanogen Recovery.
So when I flash RR, it automatically replaces my recoveries with the Cyanogen Recovery.
Is there any way to avoid that? Or is there any way I can flash my Duel Recovery back after installing RR?

SethPDA said:
I just noticed a few things. The stock based roms are using the Dual Recovery in their rom, but CM based roms, like Resurrection Remix, uses Cyanogen Recovery.
So when I flash RR, it automatically replaces my recoveries with the Cyanogen Recovery.
Is there any way to avoid that? Or is there any way I can flash my Duel Recovery back after installing RR?
Click to expand...
Click to collapse
It's not all cm-based ROMs that use cm recovery. Each ROM is different. It's discussed in the RR thread, and it's in the 2nd post that cm recovery is built in to that ROM. There's links there for other recovery options. I like to always have Rashr on hand to easily flash IMGs, so I can access my backups from other recoveries. Dual recovery is just not going to work on every ROM.

levone1 said:
It's not all cm-based ROMs that use cm recovery. Each ROM is different. It's discussed in the RR thread, and it's in the 2nd post that cm recovery is built in to that ROM. There's links there for other recovery options. I like to always have Rashr on hand to easily flash IMGs, so I can access my backups from other recoveries. Dual recovery is just not going to work on every ROM.
Click to expand...
Click to collapse
Okay so here is what I did:
I flashed latest RR rom
This of course, overwrote my TWRP recovery so right now I have Cyanogen recovery.
Now I flash with Flashtool, the FOTA TWRP recovery which you pointed me at.
Device does not boot
I flash CM kernel from the multirom thread, which gives me acces to the previously flashed FOTA recovery BUT!
Device boots, Stuck at boot
What am I doing wrong?
EDIT: I tried flashing recovery with Rashr, it does nothing.

SethPDA said:
Okay so here is what I did:
I flashed latest RR rom
This of course, overwrote my TWRP recovery so right now I have Cyanogen recovery.
Now I flash with Flashtool, the FOTA TWRP recovery which you pointed me at.
Device does not boot
I flash CM kernel from the multirom thread, which gives me acces to the previously flashed FOTA recovery BUT!
Device boots, Stuck at boot
What am I doing wrong?
EDIT: I tried flashing recovery with Rashr, it does nothing.[/QUOTE
I haven't used RR since 1st build, but I know it's been addressed in the thread. I would be glad to try it out to help. Meanwhile, I would try to flash twrp with fastboot, (you said you used Flashtool - maybe the same, but worth a try), and also try flashing M5, (which you need recovery to do, but you could use a temp. boot.img to get into recovery, then flash M5), which may work better with recovery. There's also Nut's PC installer. And search the RR thread.
I'll attach a copy of twrp 2.8.7.0 to try. Hope this helps.
(File too big to attach. Let me know if you want it and I'll send a link)
Click to expand...
Click to collapse

levone1 said:
SethPDA said:
Okay so here is what I did:
I flashed latest RR rom
This of course, overwrote my TWRP recovery so right now I have Cyanogen recovery.
Now I flash with Flashtool, the FOTA TWRP recovery which you pointed me at.
Device does not boot
I flash CM kernel from the multirom thread, which gives me acces to the previously flashed FOTA recovery BUT!
Device boots, Stuck at boot
What am I doing wrong?
EDIT: I tried flashing recovery with Rashr, it does nothing.[/QUOTE
I haven't used RR since 1st build, but I know it's been addressed in the thread. I would be glad to try it out to help. Meanwhile, I would try to flash twrp with fastboot, (you said you used Flashtool - maybe the same, but worth a try), and also try flashing M5, (which you need recovery to do, but you could use a temp. boot.img to get into recovery, then flash M5), which may work better with recovery. There's also Nut's PC installer. And search the RR thread.
I'll attach a copy of twrp 2.8.7.0 to try. Hope this helps.
(File too big to attach. Let me know if you want it and I'll send a link)
Click to expand...
Click to collapse
You can't because CyanogenMod uses its own Recovery based of CWM ( I think? ). You could try however, using a custom kernel that has its own Dual recovery ( for e.g. PhilzTouch and TWRP )
Click to expand...
Click to collapse

SethPDA said:
Okay so here is what I did:
I flashed latest RR rom
This of course, overwrote my TWRP recovery so right now I have Cyanogen recovery.
Now I flash with Flashtool, the FOTA TWRP recovery which you pointed me at.
Device does not boot
I flash CM kernel from the multirom thread, which gives me acces to the previously flashed FOTA recovery BUT!
Device boots, Stuck at boot
What am I doing wrong?
EDIT: I tried flashing recovery with Rashr, it does nothing.
Click to expand...
Click to collapse
I just remembered something else. See my post here- http://forum.xda-developers.com/showpost.php?p=62114382&postcount=534 - latest version of Rashr doesn't seem to work on some ROMs. Try this one...
Edit - I just successfully flashed twrp 2.8.7.0 on latest RR using Rashr. Make sure to use this version, not the latest Play Store.

Okay so I tried what @levone1 said. I installed that Rashr which you uploaded. I tried flashing the recovery with this, and it worked! Thank you very much guys for your help!

hey thanks to levone1 i got twrp running on crDroid rom.:good::good::good:
i did it like he said: Use his Version of rashr and flash his twrp. done!