Related
Hi
I have a t-mobile D851 LG G3, for which i was trying to restore to STOCK software, through one of the guides elsewhere on the forum. My first try FAILED, and now the phone is stuck on the "FIRMWARE UPDATE - Do not unplug the USB connection until the process is finished - USER B51" screen
No matter what i do (all key combinations for recovery mode, download mode), plugging, unplugging the phone, taking the battery out for 30 mins or so, and putting it back - NOTHING is working. It all goes back to the screen mentioned above.
I tried running the LG Flash tool again, but it fails.
Any ideas? Any help would be greatly appreciated. This phone is my daily driver, and I am in a major fix without it.
link for the guide I used to flash
http://forum.xda-developers.com/tmob...lg-g3-t2818667
EDITED: LINK HERE
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
EDIT - SOLVED
Thanks to everyone who chipped but especially to pside15 and one other person (but i can't find his post)
The solution was very simple - I was making the idiotic mistake of looking at just the computer screen and NOT the phone screen. The computer kept giving me all sorts of errors saying 'update failed - can't connect to server, yada yada' etc. I just left the phone alone - came back 10 mins later to working phone.
Moral of the story - Watch BOTH the phone screen and the computer while doing these things, because my computer had me believe that this is not gonna work - the phone obviously disagreed
When the flashtool fails, whats the error? Its not hardbricked if it still comes on and goes into download mode. Look at THIS image and see if you set action mode the same. This one mistake caused me a headache last night for 6 hours.
Your link doesn't work.
I use this LG Flashtool when I soft-bricked my G3.
http://forum.xda-developers.com/showthread.php?t=2797190
joeyhdownsouth said:
When the flashtool fails, whats the error? Its not hardbricked if it still comes on and goes into download mode. Look at THIS image and see if you set action mode the same. This one mistake caused me a headache last night for 6 hours.
Click to expand...
Click to collapse
it doesn't come into download mode - its just stuck at the 'firmware update' mode at 0%
And does it matter that its a D851 (the t-mobile) version?
inshadesofgrey said:
it doesn't come into download mode - its just stuck at the 'firmware update' mode at 0%
And does it matter that its a D851 (the t-mobile) version?
Click to expand...
Click to collapse
Firmware update is dl mode. Does your computer recognize phone when its plugged in?
sent from my LG G3
joeyhdownsouth said:
Firmware update is dl mode. Does your computer recognize phone when its plugged in?
sent from my LG G3
Click to expand...
Click to collapse
The computer does recognize it. But when it comes to the point of verifying connection between phone and LG software update tool, it fails saying 'make sure the phone is connected to the computer, etc'
inshadesofgrey said:
The computer does recognize it. But when it comes to the point of verifying connection between phone and LG software update tool, it fails saying 'make sure the phone is connected to the computer, etc'
Click to expand...
Click to collapse
Uninstall drivers from device manager in computer, reinstall. Make sure to change com port to 41. Also board dl in action mode is a complete overhaul of firmware, the other setting in action mode is to update firmware.
sent from my LG G3
If your phone can turn on an go into download mode you can flash it. Just try w different computers
Same thing happened to me
joeyhdownsouth said:
Uninstall drivers from device manager in computer, reinstall. Make sure to change com port to 41. Also board dl in action mode is a complete overhaul of firmware, the other setting in action mode is to update firmware.
sent from my LG G3
Click to expand...
Click to collapse
Can i use this guide? - http://forum.xda-developers.com/showthread.php?t=2772199
If yes, what would be the relevant file for the black T-MOBILE LG G3 (D851)?
the only options i see are:
F400K V10B
Files. DLL F400K
F400L V10A
Files. DLL F400L
F400S V10B
Files. DLL F400S
inshadesofgrey said:
Can i use this guide? - http://forum.xda-developers.com/showthread.php?t=2772199
If yes, what would be the relevant file for the black T-MOBILE LG G3 (D851)?
the only options i see are:
F400K V10B
Files. DLL F400K
F400L V10A
Files. DLL F400L
F400S V10B
Files. DLL F400S
Click to expand...
Click to collapse
Im not 100% sure, because I have the Sprint LS990. As far as the model # goes, it has to be the exact one, which should be under your battery. I'll look into it more in a few hours when I get off work. Try HERE for tots and dlls
sent from my LG G3
FIXED IT!
Thanks to everyone who chipped but especially to pside15
The solution was very simple - I was making the idiotic mistake of looking at just the computer screen and NOT the phone screen. The computer kept giving me all sorts of errors saying 'update failed - can't connect to server, yada yada' etc. I just left the phone alone - came back 10 mins later to working phone.
Moral of the story - Watch BOTH the phone screen and the computer while doing these things, because my computer had me believe that this is not gonna work - the phone obviously disagreed
SOLVED!
SOLVED
Thanks to everyone who chipped but especially to pside15 and one other person, whose post i can't find now
The solution was very simple - I was making the idiotic mistake of looking at just the computer screen and NOT the phone screen. The computer kept giving me all sorts of errors saying 'update failed - can't connect to server, yada yada' etc. I just left the phone alone - came back 10 mins later to working phone.
Moral of the story - Watch BOTH the phone screen and the computer while doing these things, because my computer had me believe that this is not gonna work - the phone obviously disagreed
Bricked Sprint G3
Does this method work for the LS990 and if so where can I find the firmware files for ZV4? PLEASE NEED THE HELP! Thanks
LG G3 D855 - Firmware upgrade
Hi,
I am in the same situation here. I have used the following tutorial and successfully flashed the firmware
I am not allowed to add the link yet.. Sorry
Type the following on YouTube
How to Unroot/Unbrick LG G3!
My Phone was up and running and I forgot to close the LG Flash tool on my PC. The flash tool started to flash my phone again, at about 80%, when the tool restart the phone , it never came back and since then I am sitting at the firmware upgrade screen.
I can see a yellow mark in device manager under Portable device.... I can see under port LG Mobile Serial port which i set it to 41. I read about something called wipe cache partition. I have used few different PC but it is not downloading the firmware at all.......... Please help!!!!!!! Can I use Linux ADB to flash the firmware .... Any tutorial ......
I have really searched and searched whatever i could but could not achieve any thing sorry for opening a new tread but i am really desperate for fixing my G.
So to start i was on Art Mod v7 and i saw that he posted a black theme so i installed it after installing some system stop responding what i guessed that it might be i didn't wipe cache, well i did that and got into soft brick, i am not blaming him for any thing it was all me , so i should have flashed new kdz but i didn't do that i flashed teenybin Files i dont know why i did that but i did resulted in a different kind of brick.
So problem is i have fastboot i have download mode but device some times get detected on download some times it doesn't when it did i tried flashing kdz through lg kdz flasher but resulted in continuous operation break also no driver is detected in fastboot and more over no recovery as it is in secure boot. I am a noob so please do bear my questions.
do kindly help LGOG is in continous bootloop more to add.
some what LGNPST detects phone in download mode the same application given with teenybin.
Kindly do help i know about android i just read silently but this time i am unable to solve it.
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
thank you for replying
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?
Irazor73 said:
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?
Click to expand...
Click to collapse
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help
Thank you bro for agian replying
malimukk said:
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help
Click to expand...
Click to collapse
But it didnt help either
i am getting this error
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something
I got it, done it
malimukk said:
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something
Click to expand...
Click to collapse
Well i have retrieved my mobile from qusb_dmode means from hardbrick :victory:
alot of info trust me alot of it
Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I have the same problem, at around 10% of flashing i get the same error:
"please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu "
What did you end up doing? I've been trying for weeks to unbrick my phone i even took it to 3 cellphone repair guys in my town and no one knows how to unbrick it.
Please get back to me! Im stuck.
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Stiffmeistro said:
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Click to expand...
Click to collapse
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Fluffywolf said:
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Click to expand...
Click to collapse
engmia said:
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
Click to expand...
Click to collapse
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Stiffmeistro said:
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Click to expand...
Click to collapse
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
1SouthernCanuck said:
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
Click to expand...
Click to collapse
Just read over the thread, it's what it's here for.
Stiffmeistro said:
i dont have time to explained what i did but it works
Click to expand...
Click to collapse
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
exactly
leandeganis said:
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
Click to expand...
Click to collapse
Exactly, here I am running around in circles over this BOOST Stylo 2, just got it with MM 6.0.1 out of the box 2 days ago. I caught the 454.4mb update it has been trying to do! Got that baby downloaded! 1.02gb unzipped and renamed to kdz. Got a script for Terminal that will replace Kingroot's temp root with SuperSU but I am not going to attempt any further until I know LGUP will recognize and flash my .zip the bas****s deem not worth enough to put up for download on LG's site!
I got LGUP to recognize it in download mode, reads out LGLS775 but still says it cannot open it...............
His info on how he got it to work would prolly have solved this dillema..............
oh well
zach
ok had a LG G3 that's done this- as long as you can get download mode it should recover, YOU need to use the LG mobile support tool from LG website ( LG UP sees phone as unknown model ) run LG mobile Support tool and in option choose UPGRADE RECOVERY . follow instructions and allow to start process, it took 57 minutes to repair my phone - it will seem frozen anywhere from 0% to about 22% JUST WAIT IT OUT!! lg up / twrp flashes in 5 to 10 mins -- the LG m.s.t writes block by block and takes 1 hour +
so hints and info took 3 goes to find and start upgrade recovery - error on a couple of attempts. phone seems frozen around 10% and 15% of firmware upload -- go make a coffee drink it, go pee then come back and worry! A watched pot never boils!....
Stiffmeistro said:
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
Click to expand...
Click to collapse
please tell me how to solved your problem my D682 deivce is always opening on recovery but there is no recovery menu just android robot
I have same issue as op described .After unbrick my g3 f400s by short wire method i get error at 94% in tot method and red screen show these word error wrong qem =0 .After remove and put battery again mobile runing but without baseband and null imei .Plz help i need really help
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
---------- Post added at 03:33 AM ---------- Previous post was at 03:22 AM ----------
Sedado77 said:
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
Click to expand...
Click to collapse
It didn't. It's EVEN MORE broken :'(
I figured out how to get my PC to recognize my D851. Apparently all the LG software didn't like how many COM ports I have. As soon as I unplugged everything else from my PC, the software worked. In this case, it was LG Flash Tool 2014, but I couldn't get any of them to work before.
Try running LGUP as Admin!!! For me it worked!
Try running LGUP as Admin!!! For me it worked!
Thankx Bro Its Work
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Hope someone can help me. I flashed a rom for a d855, d855g30 I think, and although I can access download mode all aps for flashing fail saying it's the wrong model number. Even the generic DLL file cant trick it. It still starts booting the rom but boot loops before entering. I no longer have twrp and when I try to do safe mode or factory reset I get a boot validation error or something similar. Just seem to be stuck. Im using a VS985.
One cause of LGUP "UNKNOWN"
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11. After installing LGUP, make sure that the "model" subdirectory in the LGUP program directory is the same number as the processor in your phone, in my case c:\Program Files (x86)\LG Electronics\LGUP\model\8974 (was 8994 with the "LGUP for G3" I downloaded).
HTH
Hi everyone
I having this problem with my lg g3 d855 ... My phone was at 5% then i wanted to remove kingroot because i wanted to flash super su. After uninstalling kingroot (in the app) the app crashed ant after few seconds my phone turned off... i was thinking my phones battery just died, but i was wrong. My phone wont turn on now :/... Only response i get from it then i plug it in the charger without battery (it show no battery error)... then i put battery in, screen goes blank.
And also i installed twrp using app from store (Forgot the name, but for d855 model)
*LG G3 D855 Android 6.0 official* (if needed.)
i tried:
holding power button for 15sec without battery and then charging it... Didn't work :/.
Putting another battery (Galaxy s3... Charged to 30% at least. I don't have another lg battery ), same result.
New battery also doesn't do anything...
EDIT:
i tried method in http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 but i can't find nor make .tot file :/ anyone can link mby?
and there's exclamation mark near Qualcomm HS-USB QDLoader 9008(COM13) in device manager. Maybe there's a problem with that?
Help guys
EDIT V2!!:
Thanks for nothing
i fixed my lgg3 with this tutorial http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
and flashed files in this order http://forum.xda-developers.com/spr...very-guide-t3132359/post65291398#post65291398
after that i put phone into download mode and flashed kdz file i had
at least someone responded to this post :/
It works now!..
The problem was autorec... i tried to install recovery using autorec for lollipop and that screwed everything
I have exactly the same problem.
Hamtero said:
I have exactly the same problem.
Click to expand...
Click to collapse
i fixed my lgg3 with this http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
and flashed files in this order http://forum.xda-developers.com/spr...very-guide-t3132359/post65291398#post65291398
(i installed slb1 without battery and then unpluged phone, put battery, hold volume up, putted usb back into phone and tried to put phone into download mode. IT WORKED!! )
And Thanks for replay
I was in the middle of unbrick my g3 from hard brick to soft brick. I flash firmware using lg up at 99% then the phone died as it tried to reboot. It won't boot at all. As you said when remove the battery and connect charger, i can see my motherboard working with exclamation mark. As soon as i put the battery, motherboard out and no sign of life. Is this sign of bad battery or what. I don't have spared battery
I recommend first, to users with similar problems, to try first my guide in following link and after the pins in motherboard-tot files
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268/page116
Superuser_ said:
I recommend first, to users with similar problems, to try first my guide in following link and after the pins in motherboard-tot files
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268/page116
Click to expand...
Click to collapse
I have D858HK hard bricked for 2 month and i use v10d to flash every partition. Then it won't boot into recovery. When i use v985 .tot, it successfully boot into recovery. Also on LG Smart Board diagnostic, my model not detected. Even if i manually select, nothing happen when it reboot. Right now, i have no idea whats wrong as i spent countless of hour on google and XDA.
anip_aniki said:
I have D858HK hard bricked for 2 month and i use v10d to flash every partition. Then it won't boot into recovery. When i use v985 .tot, it successfully boot into recovery. Also on LG Smart Board diagnostic, my model not detected. Even if i manually select, nothing happen when it reboot. Right now, i have no idea whats wrong as i spent countless of hour on google and XDA.
Click to expand...
Click to collapse
Have you try my guide?
Superuser_ said:
Have you try my guide?
Click to expand...
Click to collapse
I already follow your guide. The thing is, my device not detected on LG Smart Board Diagnostic. When i manually select my device, everything ok then it boot with blank screen with red and blue led. I can't even enter download mode. I use win 10 64bit with all driver installed and disable integrity checks and everything
Hello there pals, I have a problem, I have an Lg H815P (Mexico Version), and i was using it normally for about 15 days, then suddenly the home screen freezed, and then the phone restarted, i thougt it was just a lagging issue, but then, when the phone booted up again, after like 5 secs it freezed up again and restart, a infinte loop, then i said, this Rom must be corrupted (Stock TELCEL Rom v20b Android MM), and decided to do a hardware keys factory reset, then the phone restarted but when it was android upgrading apps, it kept restarting, at last it booted up but the problem persist. So im kinda worried, how a problem cant be fixed at a full hard reset? When im trying to flash a KDZ file From lg flash tool, the program fails because cant find phone, a kinda weird thing because the adb detects it sometimes, others not, i booted the phone in safe mode and the problem persist anyway, what can I do? I already have the drivers, the lg up, and the lg bridge apps, they all said that im running the last software for my mobile device, i´ve tried another battery as well, so im kinda lost, another thing, after the hard reset, the phone was able to stay on like 15 mins, sometimes 5, sometimes just secs, dunno what is happening but i really need some ideas, can you help me to work this out?
Greetings pals!
Delintg2 said:
Hello there pals, I have a problem, I have an Lg H815P (Mexico Version), and i was using it normally for about 15 days, then suddenly the home screen freezed, and then the phone restarted, i thougt it was just a lagging issue, but then, when the phone booted up again, after like 5 secs it freezed up again and restart, a infinte loop, then i said, this Rom must be corrupted (Stock TELCEL Rom v20b Android MM), and decided to do a hardware keys factory reset, then the phone restarted but when it was android upgrading apps, it kept restarting, at last it booted up but the problem persist. So im kinda worried, how a problem cant be fixed at a full hard reset? When im trying to flash a KDZ file From lg flash tool, the program fails because cant find phone, a kinda weird thing because the adb detects it sometimes, others not, i booted the phone in safe mode and the problem persist anyway, what can I do? I already have the drivers, the lg up, and the lg bridge apps, they all said that im running the last software for my mobile device, i´ve tried another battery as well, so im kinda lost, another thing, after the hard reset, the phone was able to stay on like 15 mins, sometimes 5, sometimes just secs, dunno what is happening but i really need some ideas, can you help me to work this out?
Greetings pals!
Click to expand...
Click to collapse
I have had this problem occur because of the launcher. Try cleaning the cache and data and see whether an updated version is available. You could also try a 3rd party one and see if that helps or simply re-install the LG launcher.
If no luck, you could try flashing another kdz with LGUP-NEW: https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
There are a couple of TCL kdz's listed on this site: https://lg-firmwares.com/lg-h815p-firmwares/
Scroll sown to LG H815P Firmware List.
Back up everything first.
sdembiske said:
I have had this problem occur because of the launcher. Try cleaning the cache and data and see whether an updated version is available. You could also try a 3rd party one and see if that helps or simply re-install the LG launcher.
If no luck, you could try flashing another kdz with LGUP-NEW: https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
There are a couple of TCL kdz's listed on this site: https://lg-firmwares.com/lg-h815p-firmwares/
Scroll sown to LG H815P Firmware List.
Back up everything first.
Click to expand...
Click to collapse
Ty pal, I´ve tried with nova launcher, but no dice, still restarting, perhaps because i cant disable lg launcher from apps menu, actually i´ve been trying with flashtool and kdz files but i think the program doesnt recognize phone, cuz it show the message in lg mobile support tool: error required info cannot be found, contact administrator. I have the drivers, the pc in download mode and connected to pc, full charged, what else im missing?
Delintg2 said:
Ty pal, I´ve tried with nova launcher, but no dice, still restarting, perhaps because i cant disable lg launcher from apps menu, actually i´ve been trying with flashtool and kdz files but i think the program doesnt recognize phone, cuz it show the message in lg mobile support tool: error required info cannot be found, contact administrator. I have the drivers, the pc in download mode and connected to pc, full charged, what else im missing?
Click to expand...
Click to collapse
seems to me that you got the bootloop.
send it to repair if warranty.. if not try LG mexico.
Delintg2 said:
Ty pal, I´ve tried with nova launcher, but no dice, still restarting, perhaps because i cant disable lg launcher from apps menu, actually i´ve been trying with flashtool and kdz files but i think the program doesnt recognize phone, cuz it show the message in lg mobile support tool: error required info cannot be found, contact administrator. I have the drivers, the pc in download mode and connected to pc, full charged, what else im missing?
Click to expand...
Click to collapse
Make sure you are using the correct LG Mobile Driver on your PC: LGMobileDriver_WHQL_Ver_4.2.0
If you are using the drivers your PC installs, you will have issues. Check in Device Manager on your PC.
Use LGUP-NEW to install a kdz.
sdembiske said:
Make sure you are using the correct LG Mobile Driver on your PC: LGMobileDriver_WHQL_Ver_4.2.0
If you are using the drivers your PC installs, you will have issues. Check in Device Manager on your PC.
Use LGUP-NEW to install a kdz.
Click to expand...
Click to collapse
Delintg2 said:
Ty pal, I´ve tried with nova launcher, but no dice, still restarting, perhaps because i cant disable lg launcher from apps menu, actually i´ve been trying with flashtool and kdz files but i think the program doesnt recognize phone, cuz it show the message in lg mobile support tool: error required info cannot be found, contact administrator. I have the drivers, the pc in download mode and connected to pc, full charged, what else im missing?
Click to expand...
Click to collapse
sdembiske said:
I have had this problem occur because of the launcher. Try cleaning the cache and data and see whether an updated version is available. You could also try a 3rd party one and see if that helps or simply re-install the LG launcher.
If no luck, you could try flashing another kdz with LGUP-NEW: https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
There are a couple of TCL kdz's listed on this site: https://lg-firmwares.com/lg-h815p-firmwares/
Scroll sown to LG H815P Firmware List.
Back up everything first.
Click to expand...
Click to collapse
I found the correct drivers and installed a DLL for lg up, so the program now detects my phone, the problem is that i install as Refurbish the same version that i was running, the h815p v20a, but when it finishes it says rebooting, but in the device is boot looped at lg logo and powered by android, the phne used to boot and show desktop, now is bootlooped, what else can I do to make him boot?
Cheers buddies
Delintg2 said:
I found the correct drivers and installed a DLL for lg up, so the program now detects my phone, the problem is that i install as Refurbish the same version that i was running, the h815p v20a, but when it finishes it says rebooting, but in the device is boot looped at lg logo and powered by android, the phne used to boot and show desktop, now is bootlooped, what else can I do to make him boot?
Cheers buddies
Click to expand...
Click to collapse
If the phone is still recognized on your PC, see if you can get into download mode. If you can, try re-installing the KDZ from there. Make double sure it is the same kdz that was installed on your phone when it worked.
The other option is to see if you can get into recovery mode and try a factory reset.
It is possible that the freezing you were experiencing before when it booted up was, as raptordd suggested above in post #4, an early sign of the hardware bootloop issue that has now manifested fully. The only real option then is to send it in to LG for repair and tell them your phone, you believe, has developed the hardware bootloop issue. Even if out of official warranty, they should replace the motherboard in that case, at no cost to you.
sdembiske said:
If the phone is still recognized on your PC, see if you can get into download mode. If you can, try re-installing the KDZ from there. Make double sure it is the same kdz that was installed on your phone when it worked.
The other option is to see if you can get into recovery mode and try a factory reset.
It is possible that the freezing you were experiencing before when it booted up was, as raptordd suggested above in post #4, an early sign of the hardware bootloop issue that has now manifested fully. The only real option then is to send it in to LG for repair and tell them your phone, you believe, has developed the hardware bootloop issue. Even if out of official warranty, they should replace the motherboard in that case, at no cost to you.
Click to expand...
Click to collapse
Now that u mention that, the phone was recognized by pc, but i installed a lot of kdzs, and none of them made the phone boot, every one of them were for h815p v20a, the one that was installed, but now i connect it to pc and then says download mode but doesnt enter and then the lg logo appears again, even the charge is meesed up now, i think i screwed the download mode and the charge mode, is that possible? but i tried the factory reset when i had the working firmware but the problem persists. Now im thinkin my only option is to use a octoplus box to revive it, but dunno if that will fix the restart problem, about that warranty stuff, i can send it to lg mexico and they should change my motherboard for free? That sound too good to be true.
Salute! pals
Delintg2 said:
Now that u mention that, the phone was recognized by pc, but i installed a lot of kdzs, and none of them made the phone boot, every one of them were for h815p v20a, the one that was installed, but now i connect it to pc and then says download mode but doesnt enter and then the lg logo appears again, even the charge is meesed up now, i think i screwed the download mode and the charge mode, is that possible? but i tried the factory reset when i had the working firmware but the problem persists. Now im thinkin my only option is to use a octoplus box to revive it, but dunno if that will fix the restart problem, about that warranty stuff, i can send it to lg mexico and they should change my motherboard for free? That sound too good to be true.
Salute! pals
Click to expand...
Click to collapse
See if you can enter recovery using the hardware buttons and try executing it again.
LG has been replacing motherboards in a lot of cases where the issue is attributable to their own hardware issue (ILAPO). You don't really want to discuss the things you have done to get it working again with them ... if you get my drift, i.e., play dumb ...
sdembiske said:
See if you can enter recovery using the hardware buttons and try executing it again.
LG has been replacing motherboards in a lot of cases where the issue is attributable to their own hardware issue (ILAPO). You don't really want to discuss the things you have done to get it working again with them ... if you get my drift, i.e., play dumb ...
Click to expand...
Click to collapse
Ok if none of the baove works, ill do that, but no, it has no recovery neither, not even stock, i read about a bootloader way to fix the download mode, im gonna try that but i doubt i can cuz bootloader is factory locked cuz is latin version.
No luck at all, phone is still bricked, is there any way to flash stuff via bootloader or abd without bootloader unlocked or root?