Finally figured out the right settings for H2O Wireless. Works perfect on my 1520 running W10M.
Internet Settings
Profile Name: H2O Wireless Internet
APN: att.mvno
User name:
Password:
Type of sign-in info: None
-Enable "Use this APN for LTE and replace the one from my mobile operator"
Proxy server (URL):
Proxy port:
MMS Settings
Profile name: H2O Wireless MMS
APN: att.mvno
User name:
Password:
Type of sign-in info: None
IP Type: IPv4
Proxy Server: 66.209.11.33
Proxy Port: 80
MMSC (URL): http://mmsc.cingular.com
MMSC Port:
Maximum MMS size (KB): 2048
I hope this helps somebody out. I spent a long time on W10M without MMS.
Related
Ive been looking for this forever and cant find the correct verizon apn settings to put into my android build.This is what I see so far, but when android reboots i cant make calls or get any internet connection. Reason why I need the correct apn settings.
APN
internet
Proxy
<not set>
Port
<not set>
Username
<not set>
Password
****
Server
*
MMSC
null
MMS proxy
<not set>
MCC
310
MNC
995
APN type
<not set>
This is all I could find through Google
Verizon 1
Gateway IP: 12.168.70.74
Port: 9201
Verizon 2
Gateway IP: 153.114.115.100
Port 9203
Verizon 3
APN: No configuration needed
Username for APN: No configuration needed
Password for APN: No configuration needed
WAP Gateway IP: 153.114.115.100
WAP Gateway Port: 9203
how does this apply to putting it into the apn config
not sure if you still need the information.....
but i have only been able to send thus far. not receive.
your settings are not bad just name the
apn name=Verizon
apn=internet
mmsc=http://mms.vtext.com/servlets/mms
type=mms
the rest leave alone and save. you are able to send. not receive same with sprint. they cant receive
Hi, I recently unlocked my Incredible 2 and I'm in India. It seems that the new SIM card allows me to make voice calls fine, but I can't seem to get 3G data even after signing up for the plan here etc. It shows Airtel (service provider) in the networks list and is active, but I still cannot get it to connect. Any ideas?
Have you confirmed your APN is entered correctly?
Some help for ya: http://forum.xda-developers.com/showthread.php?t=550673
Read below instructions for Airtel Mobile Office and Airtel MMS APN Settings:
1. Delete all APN
2. Create New APN with followint Settings
Name: Internet
APN: airtelgprs.com
Proxy:
Port:
Username:
Password
Server: *
MMSC: http://100.1.201.171:10021/mmsc
MMS Proxy: 100.001.201.172
MMS Port: 8799
MCC: 404
MNC: 92
APN Type: default
3. Save and then create one more APN with following Settings:
Name: mms
APN: airtelmms.com
Proxy: 100.001.201.172
Port:8799
Username:
Password
Server: *
MMSC: http://100.1.201.171:10021/mmsc
MMS Proxy: 100.001.201.172
MMS Port: 8799
MCC: 404
MNC: 92
APN Type: mms
Click to expand...
Click to collapse
Thank you guys very much. This got me on the net with Airtel!
To keep the development threads clean, you can post your APN data and steps taken to remedy any LTE data related issues.
Thanks,
Trem
TELUS originally posted by: yeahitsgotahemii
NAME : TELUS SP
APN : SP.TELUS.COM
PROXY : NOT SET
PORT : NOT SET
USERNAME: NOT SET
PASSWORD : NOT SET
SERVER : NOT SET
MMSC : HTTP://ALIASREDIRECT.NET/PROXY/MMSC
MMS PROXY: 74.49.0.18
MMS PORT: 80
MCC: 302
MNC: 220
AUTHENTICATION TYPE: NONE
APN TYPE : INTERNET + MMS
APN PROTOCOL : IPV4
ENABLE/DISABLE APN: APN ENABLED (CHECKED)
BEARER: UNSPECIFIED
NAME: TELUS ISP
APN: ISP.TELUS.COM
PROXY NOT SET
PORT NOT SET
USERNAME NOT SET
PASSWORD NTO SET
SERVER NOT SET
MMSC NOT SET
MMS PROXY NOT SET
MMS PORT NOT SET
MCC 302
MNC 220
AUTHENTICATION TYPE NONE
APN TYPE DUN
APN PROTOCOL IPV4
ENABLE/DISABLE APN APN ENABLED (CHECKED)
BEARER UNSPECIFIED
If you encounter issues with this apn, try (posted by MaverickHHH):
"APN TYPE : INTERNET + MMS" should be "APN TYPE : DEFAULT,MMS".
Also that thread set the following proxy, port:
Proxy: 74.49.0.18
Port: 80
BELL/VIRGIN
NAME: BELL INTERNET
APN: PDA.BELL.CA
PROXY: NOT SET
PORT: NOT SET
USERNAME: NOT SET
PASSWORD: NOT SET
SERVER: NOT SET
MMSC: HTTP://MMS.BELL.CA/MMS/WAPENC
MMS PROXY: WEB.WIRELESS.BELL.CA
MMS PORT: 80
MCC: 322
MNC: 610
AUTHENTICATION TYPE: NOT SET
APN TYPE: INTERNET + MMS
APN PROTOCOL: IPV4
BEARER: UNSPECIFIED
I am on Bell and I found repeating the MMS proxy setting in the main proxy window allowed me get LTE back.
Sent from my SGH-I317M using xda premium
Edit..after multiple test with different apn types am getting the same speed around 10-12 mpbs
Mine is Rogers LTE works on and off aftet flashing custom rom and fixed it by deleting all apn settings and just reset it to default. It pick up my networks apn settings automatically.
Sent from my SGH-I317M using xda premium
jon3sh said:
Mine is Rogers LTE works on and off aftet flashing custom rom and fixed it by deleting all apn settings and just reset it to default. It pick up my networks apn settings automatically.
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
Can I get the APN for Rogers and I'll add it to the op?!
TREMER said:
Can I get the APN for Rogers and I'll add it to the op?!
Click to expand...
Click to collapse
Name: Rogers LTE
APN: ltemobile.apn
MMSC:*http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
Mns port: 80
Mcc: 302
Mcc: 720
Authentication Type: none
Apn type: internet + mms
Bearer: unspecified
Name: LTE Tethering
Apn: ltedata.apn
Mcc: 302
Mnc: 720
Authentication type: none
Apn type: dun
Bearer: unspecified
jon3sh said:
Name: Rogers LTE
APN: ltemobile.apn
MMSC:*http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
Mns port: 80
Mcc: 302
Mcc: 720
Authentication Type: none
Apn type: internet + mms
Bearer: unspecified
Name: LTE Tethering
Apn: ltedata.apn
Mcc: 302
Mnc: 720
Authentication type: none
Apn type: dun
Bearer: unspecified
Click to expand...
Click to collapse
For the longest time while on Fido (Fido is a Rogers Sub-brand), I could not get the Tethering to work. It seems that (at least for Fido guys) the the APN for LTE Tethering should be 'ltemobile.apn' just like the regular data one.
Telus APN update
Thanks OP for starting this thread.
I finally got my LTE working. You can remove the following:
"Also that thread set the following proxy, port:
Proxy: 74.49.0.18
Port: 80"
I left that as <NOT SET> and it was fine.
I recently rooted my Nexus 4, which I use on the Aio network, and despite what I thought was a complete user data backup my network settings were reset. Aio doesn't have them posted anywhere on their website, so I had to call and get them from some dude in India. Here they are. Not sure if any of this is device dependent, but I doubt it.
In KitKat: Settings->More->Mobile networks->Access Point Names->+ (new)
Name: Internet
APN: ndo
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http: / / mmsc . aiowireless . net (without spaces. this is not a link, this is the text that goes there)
MMS proxy: proxy . aiowireless . net (without spaces)
MMS port: 80
MCC: 310
MNC: 150
Authentication type: Not set
APN type: default,mms,foda,hipri,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: unspecified
MVNO type: None
I got the native Hotspot working on gsm-unlocked RAZR M with Straighttalk/ATT sim!
(Not sure if this has already been posted, but I struggled with this for awhile, so I wanted to share).
It would always fail, and tell me to activate this feature call ATT.
All I had to do was edit the APN settings to include "dun"...and boom, it worked!
My APN settings:
Name: straight talk
APN: tfdata
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mms-tf.net
MMS proxy: mm3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,admin,fota,mms,hipri,dun (and no spaces after commas)
APN protocal: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: none