Develop Bugs

Help me guys.. "secure boot error"

somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks

shirish893 said:
somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks
Click to expand...
Click to collapse
Try flashing the rom less than 1 GB using the KDZ_FW_UPD.exe with CS_Emergancy mode it should work if your phone have enough battery power to keep it on in download mode for 10 minutes or so, if not then try through LGNPST using tot file. Or check if it charges in the custom recovery.
Correct me if I am wrong

hackenggr said:
Try flashing the rom less than 1 GB using the KDZ_FW_UPD.exe with CS_Emergancy mode it should work if your phone have enough battery power to keep it on in download mode for 10 minutes or so, if not then try through LGNPST using tot file. Or check if it charges in the custom recovery.
Correct me if I am wrong
Click to expand...
Click to collapse
i cant neither go to recovery nor bootloader..
and i tired using kdz updater.. it shows to charge ur battery
see the pictures below

shirish893 said:
i cant neither go to recovery nor bootloader..
and i tired using kdz updater.. it shows to charge ur battery
see the pictures below
Click to expand...
Click to collapse
Turn off your phone and put it in download mode by pressing and holding ‘Volume Up’ + ‘Volume Down’ and inserting USB and use the software to flash KDZ that I attached the screetshot, KDZ_FW_UPD.exe, this one can't flash the KDZ file bigger than 1 GB so if your KDZ is more than ! GB in size then download one that is less then 1 GB recover your phone charge it then flash your desired one. You are using the R & D Tool it always check the battery level and not allow you to flash if battery is less than 50%.
Note: If you have the mako bootloader install this tool might not flash the kdz (It never did for me) to come back to full stock you will have to use the LGNPST

hackenggr said:
Turn off your phone and put it in download mode by pressing and holding ‘Volume Up’ + ‘Volume Down’ and inserting USB and use the software to flash KDZ that I attached the screetshot, KDZ_FW_UPD.exe, this one can't flash the KDZ file bigger than 1 GB so if your KDZ is more than ! GB in size then download one that is less then 1 GB recover your phone charge it then flash your desired one. You are using the R & D Tool it always check the battery level and not allow you to flash if battery is less than 50%.
Note: If you have the mako bootloader install this tool might not flash the kdz (It never did for me) to come back to full stock you will have to use the LGNPST
Click to expand...
Click to collapse
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?

shirish893 said:
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?
Click to expand...
Click to collapse
Have you tried using teenybin? http://forum.xda-developers.com/showthread.php?t=2249500

shirish893 said:
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?
Click to expand...
Click to collapse
grunch21 said:
Have you tried using teenybin? http://forum.xda-developers.com/showthread.php?t=2249500
Click to expand...
Click to collapse
Yeah try the teenybin to recover detailed instructions are on the thread. Thanks grunch21
I once seen the more easy understanding guide to setup the LGNPST software that is instructed to use in the above thread if I found it again I will post the link here for your convenience.
EDIT:
A little simple step by step instructions to use the LGNPST here How to use LGNPST on Windows 8

shirish893 said:
somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks
Click to expand...
Click to collapse
If it's of any help, I had exactly the same problem just a few days ago... Read from this post further down, there were some suggestions from folks, and the final solution to my issue. Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
As mentioned, TeenyBin and LGNPST might be another solution, but I have no first-hand experience with it, so I can't comment...
Oh, and BTW, you are saying you "tried to use KDZ Updater", but your screenshot shows the LG Mobile Support Tool -- that's a different application, and a different process. Look at a screenshot by @hackenggr a couple of posts above -- that's KDZ Updater.

kt-Froggy said:
If it's of any help, I had exactly the same problem just a few days ago... Read from this post further down, there were some suggestions from folks, and the final solution to my issue. Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
As mentioned, TeenyBin and LGNPST might be another solution, but I have no first-hand experience with it, so I can't comment...
Oh, and BTW, you are saying you "tried to use KDZ Updater", but your screenshot shows the LG Mobile Support Tool -- that's a different application, and a different process. Look at a screenshot by @hackenggr a couple of posts above -- that's KDZ Updater.
Click to expand...
Click to collapse
dude its and r and d tool... anyway..wat u did to solve this problem?? can u tell me?? I,cant get wat u talking about from ur given link

shirish893 said:
wat u did to solve this problem?? can u tell me?? I,cant get wat u talking about from ur given link
Click to expand...
Click to collapse
Hate to quote my own previous post, but here:
Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
Click to expand...
Click to collapse
That's exactly what I did. Flashed a KDZ (1.17GB in size, the smallest I could find) with a KDZ Updater. Low battery didn't matter.

kt-Froggy said:
Hate to quote my own previous post, but here:
That's exactly what I did. Flashed a KDZ (1.17GB in size, the smallest I could find) with a KDZ Updater. Low battery didn't matter.
Click to expand...
Click to collapse
but i am getting an extraction error... what should i do?

shirish893 said:
but i am getting an extraction error... what should i do?
Click to expand...
Click to collapse
Then I don't know... I told you what fixed the problem for me -- finding the smallest KDZ that could be flashed. If it doesn't work in your case, look into something else, like TeenyBin.

kt-Froggy said:
Then I don't know... I told you what fixed the problem for me -- finding the smallest KDZ that could be flashed. If it doesn't work in your case, look into something else, like TeenyBin.
Click to expand...
Click to collapse
okay,, im trying teenybin

Thanx a lot guys... teenybin solved my problem :good:

wait a sec guys, i thought it was solved.. now see this problem...what shall i do? :crying:

shirish893 said:
wait a sec guys, i thought it was solved.. now see this problem...what shall i do? :crying:
Click to expand...
Click to collapse
I think because you decive is converted with mako bootloader LG software not found the LG phone so they stop.
Use the LGNPST to flash the E975 tot file same way you did with teenybin just rename the .tot to .bin and you will be on the LG stock and software will work fine to your desire KDZ

[Q] And I mannage to soft brick....

Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473

maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.

You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.

maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?

lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again

all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again

lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.

maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed

Good luck :good:

maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s

DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:

lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.

porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again

lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards

porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?

maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards

D851 Wont Boot into TWRP or Into Android after flashing Fulmics D855 ROM

As the title says, i mistakenly selected D855 in Fulmic ROM(Noob mistake). Just this morning my friends suggested Fulmic ROM so i decided to download and flash it. I already had root and TWRP 3.0.0-0 installed. After the download was done, i copied it onto my SD Card and booted into TWRP. In TWRP, i backed up my data as i had already done a full backup a month a go. I was on Stock KK 10C.
When i selected Fulmic's zip, it asked me to select my device but i noticed there was no D851, but there was the at&t version, Verizon version, D855 etc... So i selected the D855 as i taught somehow the D855 and the D851 were somewhat similar and that it would run on my D851, (yea... i now know it was such a stupid assumption i made). So i flashed the D855 onto my D851 and once it was done, i hit the reboot button and the device went off and never came on. I tried booting into TWRP but nothing worked, then i took out the battery and pressed vol up and inserted the USB and it showed me an empty battery sign with a yellow triangle on the lower right side of the empty battery.
When i connect the device to Windows, it shows up as LGE AndroidNet USB Serial Port.
I am pretty lost here, i dont know what to do right now. I have been reading lots of threads but i havent found any thread that explains how to deal with such a situation.
Any Help is appreciated.
Regards Mickey.

Wow! No replies so far?
People, i am loosing it here. Any suggestions are welcomed. I have no idea what i should do

Cry...and be very angry. Jk
You more than likely hard bricked like others are doing because they're flashing the wrong things...
It's like using diesel in a petrol motor and vice versa. You're gonna have a bad time.
Honestly I don't know how to help because I don't flash things that don't go with my device, I am not being a jerk but just saying, i'd take a look at the hard brick Q&A's ive seen a few of them. They might have what you are looking for ?

Gytole said:
Cry...and be very angry. Jk
You more than likely hard bricked like others are doing because they're flashing the wrong things...
It's like using diesel in a petrol motor and vice versa. You're gonna have a bad time.
Honestly I don't know how to help because I don't flash things that don't go with my device, I am not being a jerk but just saying, i'd take a look at the hard brick Q&A's ive seen a few of them. They might have what you are looking for ��
Click to expand...
Click to collapse
Thanks man, I need all the help i can get.
Getting really desperate here.

Hey amigow
Are you able to get into download mode?.. If so you can always flash back to stock kk using lg flash tool ... Search how to downgrade here on xda that'll get you back to normal as long as you're able to get into download mode

djgyo12 said:
Are you able to get into download mode?.. If so you can always flash back to stock kk using lg flash tool ... Search how to downgrade here on xda that'll get you back to normal as long as you're able to get into download mode
Click to expand...
Click to collapse
Thanks but i cant get into download mode.

mickeyasamoah said:
Thanks but i cant get into download mode.
Click to expand...
Click to collapse
If all else fails, you should be able to restore by following the instructions for a hard brick recovery. I warn you it is not a procedure for the faint of heart, but it saved my bacon (AKA, LG D850).
It involves shorting two pins on a chip (can't remember if it's the SOC or not, but it hardly matters). I managed it with a pair of needlepoint tweezers, but the guide instructs you to use a fine wire. I can't imagine doing it that way, but maybe you can.
In any case, the guide that worked for me is here, "http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359" . Just follow it to the letter and don't compound your earlier mistake. (Not trying to be a jerk; just advising against rushing the process or second guessing any steps. You might think it can't get any worse or you've got nothing to lose, but it's still possible to make it worse by doing something wrong.)
Good luck!

LG G4 H810 Doesn't power up

Hello there, First of all i am new here, This is my first post here... well let's continue with my problem.
I bought a LG G4 about 1 month ago, everything was going perfectly, but 2 days ago it start to install a new android version on the phone, it says a new update was there, so i tried to download it... Everything goes ok and then my phone start with problems, i can't unistall any app because my phone restart, can't do a password because it close, can't use my phone like always...
So i tried to downgrade my phone to a previous android version, i tried this method: http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
I used the kdz method using LG UP, i downloaded the firmware (PR H810PR10a_04.kdz) so i decided to follow the step in the thread mentioned before, everything was ok, it show up 100% and say complete, so i decide to unplug my phone and tried to power up, so what's up? My phone died, i can't make it power up, can't access download mode, can't acess factory reset or anything else, It doesn't power up using power on button, tried to charge and does nothing, PC don't reconigze it...
So maybe i bricked it, Is there any solution to this? As i need help... I am afraid of losing my phone as it was working amazing before.
Thanks you in advance.

moises1012 said:
Hello there, First of all i am new here, This is my first post here... well let's continue with my problem.
I bought a LG G4 about 1 month ago, everything was going perfectly, but 2 days ago it start to install a new android version on the phone, it says a new update was there, so i tried to download it... Everything goes ok and then my phone start with problems, i can't unistall any app because my phone restart, can't do a password because it close, can't use my phone like always...
So i tried to downgrade my phone to a previous android version, i tried this method: http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
I used the kdz method using LG UP, i downloaded the firmware (PR H810PR10a_04.kdz) so i decided to follow the step in the thread mentioned before, everything was ok, it show up 100% and say complete, so i decide to unplug my phone and tried to power up, so what's up? My phone died, i can't make it power up, can't access download mode, can't acess factory reset or anything else, It doesn't power up using power on button, tried to charge and does nothing, PC don't reconigze it...
So maybe i bricked it, Is there any solution to this? As i need help... I am afraid of losing my phone as it was working amazing before.
Thanks you in advance.
Click to expand...
Click to collapse
Anyone can help me please? I really need help with this!

moises1012 said:
Anyone can help me please? I really need help with this!
Click to expand...
Click to collapse
Just give another cable a try. Maybe it's just the charger. Otherwise you may be another victim of the motherboard issue. Which serial? 5xx?

steadfasterX said:
Just give another cable a try. Maybe it's just the charger. Otherwise you may be another victim of the motherboard issue. Which serial? 5xx?
Click to expand...
Click to collapse
Where can i find the serial number? Sorry i am just newbie in this.
About your solution it doesn't work, I have tried diferrent cables chargers and still don't work, It don't make any sign of life, it's dead completely.

Anyone please help me....

moises1012 said:
Where can i find the serial number? Sorry i am just newbie in this.
About your solution it doesn't work, I have tried diferrent cables chargers and still don't work, It don't make any sign of life, it's dead completely.
Click to expand...
Click to collapse
Pull out he battery and you will see the serial. If it starts with 5xx your chances are big that you're another victim of the main board issue.
Check the other threads regarding bootloop and if you wanna recover your data try the freezer or oven method (search for those here)
.

steadfasterX said:
Pull out he battery and you will see the serial. If it starts with 5xx your chances are big that you're another victim of the main board issue.
Check the other threads regarding bootloop and if you wanna recover your data try the freezer or oven method (search for those here)
.
Click to expand...
Click to collapse
No, My serial number don't start with 5, it's 404kxxxxx
Anyways i am going to give those threads a look, thanks you so much.

steadfasterX said:
Pull out he battery and you will see the serial. If it starts with 5xx your chances are big that you're another victim of the main board issue.
Check the other threads regarding bootloop and if you wanna recover your data try the freezer or oven method (search for those here)
.
Click to expand...
Click to collapse
I have read others thread regarding the bootloop issue but it's not my problem... The main problem is my phone is dead... I can't make PC to recognize it, can't put chargers, don't even give any sign of life to power up, LED don't power up... So how can i do any of these methods when i can't make it awake?
Thanks you.

Me too, my phone doesn't turn on anymore, please help

Any solution to this please?

Your phone is proably refurbrished, and it have no all h810 parts inside. So proably it's not H810, and you flashed image for this, that's can be problem. you have to disassembly your phone and check parts.

I buyed it new so it's not refurbrished

Where you bought

Ganjax said:
Where you bought
Click to expand...
Click to collapse
Amazon, I bought it new. I know in amazon are some refurbrished phones but i am sure i bought it new.

moises1012 said:
Amazon, I bought it new. I know in amazon are some refurbrished phones but i am sure i bought it new.
Click to expand...
Click to collapse
Amazon? It's same as aliexpress or even wish

It's an Online shop, I bought it directly of a trusted seller so i am sure it's new... The problem come when it start updating.

LG is having a hard time with dead phones, one of my Nexus 5x just died... It just died and will need to send it to repair.
Enviado desde mi Nexus 5X mediante Tapatalk

Question Hard bricked - help needed

Hello,
In the rush of flashing the january update I've flashed by mistake the Pixel 5 image bootloader (my wife's phone)
Yest that's stupid, I've done this every months for years with several Pixel phones, but I was listening to music at the same time and did dl the wrong image...
Anyway my phone is now hard bricked but I'm sure there must be a way to enter the other bootlader slot and/or entering a special recovery tool.
I cannot enter bootloader anymore
Requesting some help as I'd avoid to send it for a reflash...
Thanks !

Try: https://pixelrepair.withgoogle.com/carrier_selection
(I've never personally used this)

foobar66 said:
Try: https://pixelrepair.withgoogle.com/carrier_selection
(I've never personally used this)
Click to expand...
Click to collapse
Unfortunately the phone is supposed to have a working bootloader

Thibale said:
Unfortunately the phone is supposed to have a working bootloader
Click to expand...
Click to collapse
Ouch ...

Thibale said:
Unfortunately the phone is supposed to have a working bootloader
Click to expand...
Click to collapse
Android Flash Tool
flash.android.com
Also doesn't work?

Morgrain said:
Android Flash Tool
flash.android.com
Also doesn't work?
Click to expand...
Click to collapse
Nope...

Thibale said:
Nope...
Click to expand...
Click to collapse
Can you still access Fastboot Mode?
(pressing and holding both Power and Volume Down simultaneously. You should see a green android on his back)

Morgrain said:
Can you still access Fastboot Mode?
(pressing and holding both Power and Volume Down simultaneously. You should see a green android on his back)
Click to expand...
Click to collapse
No that's the problem.
But there are 2 bootloader slots (a and b) and I'm pretty sure there is way to switch from one to another with a special tool or button sequence.
I've already tried many button combinaison with no luck.
This kind of error is so stupid that I hope there is a way to force a rescue bootloader or something on boot.

yes but you need to be able to communicate with your phone from your pc.....if you cant access fastboot then how will you change partition?

Thibale said:
No that's the problem.
But there are 2 bootloader slots (a and b) and I'm pretty sure there is way to switch from one to another with a special tool or button sequence.
I've already tried many button combinaison with no luck.
This kind of error is so stupid that I hope there is a way to force a rescue bootloader or something on boot.
Click to expand...
Click to collapse
The only special tools we have are either the pixel repair tool or the android flash tool. If both can't get you fastboot / firmware flashing, that's it. Hardbrick. Google Pixels don't have "special" hardbrick solving tools, like older OnePlus had. You need to contact Google.

Ok I'll get in touch with my local reseller on Monday then...

Thibale said:
Ok I'll get in touch with my local reseller on Monday then...
Click to expand...
Click to collapse
Do you remember what went wrong?
EDIT: Uh, never mind. So you accidentally used the P5 fw. Why on hell would the device accept the P5 fw at all?!

Same problem here: downloaded from a blog the latest firmware. They have linked the pixel 5 firmware and named it as Pixel 6 pro full firmware. Just flashed without looking and now the phone wont boot. No reaction at all, no fast boot or whatsoever. Have filled in a repair request in my google account, because I’ve bought it directly in their store.
Do you think they have a way to find out what went wrong? I meant the phone is not giving any signal, regardless of which button combination I press. Worst case: I have to pay for the repair…

Psfanboy88 said:
Same problem here: downloaded from a blog the latest firmware. They have linked the pixel 5 firmware and named it as Pixel 6 pro full firmware. Just flashed without looking and now the phone wont boot. No reaction at all, no fast boot or whatsoever. Have filled in a repair request in my google account, because I’ve bought it directly in their store.
Do you think they have a way to find out what went wrong? I meant the phone is not giving any signal, regardless of which button combination I press. Worst case: I have to pay for the repair…
Click to expand...
Click to collapse
WOW. So even holding volume down and power until you see the fastboot screen wont work? sometimes you have to hold it for a while. I say that because when the December firmware came out I accidentally flashed the wrong region but was able to access bootloader and so was able to rescue myself. So sorry dude. That really sucks.

Psfanboy88 said:
Same problem here: downloaded from a blog the latest firmware. They have linked the pixel 5 firmware and named it as Pixel 6 pro full firmware. Just flashed without looking and now the phone wont boot. No reaction at all, no fast boot or whatsoever. Have filled in a repair request in my google account, because I’ve bought it directly in their store.
Do you think they have a way to find out what went wrong? I meant the phone is not giving any signal, regardless of which button combination I press. Worst case: I have to pay for the repair…
Click to expand...
Click to collapse
Yes worst case we'll have for repair but they could have implemented a simple device id check on their script prior flashing anything, especially for the bootloader.
Anyway, I'm alive, in a good health and it's just a phone

niko26 said:
Do you remember what went wrong?
EDIT: Uh, never mind. So you accidentally used the P5 fw. Why on hell would the device accept the P5 fw at all?!
Click to expand...
Click to collapse
You can flash gobbledygook to your phone if you're not careful. You can flash a non-Google phone's image. Flashing just flashes what you tell it to flash.
Psfanboy88 said:
Same problem here: downloaded from a blog the latest firmware. They have linked the pixel 5 firmware and named it as Pixel 6 pro full firmware. Just flashed without looking and now the phone wont boot. No reaction at all, no fast boot or whatsoever. Have filled in a repair request in my google account, because I’ve bought it directly in their store.
Do you think they have a way to find out what went wrong? I meant the phone is not giving any signal, regardless of which button combination I press. Worst case: I have to pay for the repair…
Click to expand...
Click to collapse
That sucks. I'm sure you know now, always go straight to the source for everything if possible, firmware, platform tools, drivers, BIOS / UEFI (for computer).
SDK Platform Tools
Get the Google USB Driver
Pixel 6 Pro Factory Images
You can also Google for official pixel firmware and the top search result is what the want. I know it doesn't help you now. Good luck with your phone!
Morgrain said:
After having played around with the January patch (came from December Europe A4 firmware that was pulled), it seems that the FP scanner got even faster and more reliable, even though it's not stated in the patchnotes. Maybe it's just placebo.
Click to expand...
Click to collapse
So many folks have reported the exact same thing, I'm really, really curious just how much faster it will seem when I get around to updating.

roirraW edor ehT said:
So many folks have reported the exact same thing, I'm really, really curious just how much faster it will seem when I get around to updating.
Click to expand...
Click to collapse
I noticed how faster it was before I saw everyone else posting about it, so at least no placebo on my end. Hope you find the same.

I know that you tried to get into Fastboot. Pixel 6/6P also has a Recovery mode. I can get to it from a working phone.
I would think that there is someway to boot into Recovery mode from a dead phone via button combos.

Thibale said:
Hello,
In the rush of flashing the january update I've flashed by mistake the Pixel 5 image bootloader (my wife's phone)
Yest that's stupid, I've done this every months for years with several Pixel phones, but I was listening to music at the same time and did dl the wrong image...
Anyway my phone is now hard bricked but I'm sure there must be a way to enter the other bootlader slot and/or entering a special recovery tool.
I cannot enter bootloader anymore
Requesting some help as I'd avoid to send it for a reflash...
Thanks !
Click to expand...
Click to collapse
Hy, how did you flashed? Via adb sideload or?

vrda08 said:
Hy, how did you flashed? Via adb sideload or?
Click to expand...
Click to collapse
factory image with modified flash-all.bat
I'll do the exact same process when I'll get my phone back but this time I'll check the image name at least 3 times