AT&T Tab S 10.5 (SM-T807A) manual Lollipop update?? - Galaxy Tab S Q&A, Help & Troubleshooting

I bought an AT&T Tab S on ebay, but it has a bad ESN and is not connected to a mobile network (I was looking for the wifi model initially, but I got this for a pretty good deal for obvious reasons). Whenever I try looking for an update, I get a message saying that the update search was interrupted, and it doesn't let me try again for another 24 hours. I plugged the device into my computer and Kies says that the firmware is up to date. Is there any way to manually update to lollipop? I've done some searching around and haven't found anything helpful.

Related

Using a voice 'three' network sim in a Galaxy Tab 3 8.0 4g

Hi, I have the UK 4G galaxy tab 3 8.0. I've been using a Three network voice/text/data sim in it for a few months, till I tried to go on the the browser and it said 'Your Sim Will Only Work in Your Phone'. Tried everything I could think of to get it to work. I called the network explained that my tab was a phone because I've been making calls off of it. They was having none of it and said my sim will no longer work for data inside my tab....killer!! It's my only source of internet and I haven't got another device to use it with. I was thinking possibly if I root it, there may be a utility which allows me to change what my tab is seen as. For example change it so it's recognised as a phone and then my sim will start working again. It's never going to work again as it is at the moment. I've rooted it before and didn't really want to do it again, because it kept screwing my data connection, I unrooted and it's been fine for weeks. Please someone help! If I have missed any details, sorry.
P.s the tab came from Vodafone UK with a sim contract that is not being used anymore, I bought the tab near enough brand new but still pre-owned.
Thanks anyway

Software Update with a different Sim Card?

Hello everyone,
I bought an AT&T 64 GB S6 edge plus and got it unlocked while in Canada by contacting them. The problem is, I have not gotten a single update from them since I got the phone. Whenever I check for an update, it says that the software is up to date which is not true because when you go their website, they had 3 updates since september, one of them being for the Gear VR, and I got none of those. Is there a way to get my phone updated without going to US?
Thanks
Not sure if its setup like this in Canada, but go to the Samsung dept. in Bestbuy that's where I get my unlocked Samsung phones updated. Takes about 5-10 mins because they already have the software downloaded on their Samsung PC, and it's FREE!!!

LM-G820UM on AT&T - Android 10 Firmware

I recently purchased a LG G8 (LM-G820UM) from China. It is an AT&T branded phone, but works perfectly with my current UK SIM. It is running Android 9 (Software Version: G820UM10m), but when I try to update to Android 10 it says, "Current software is up to date."
I am used to updating the firmware on Samsung tablets and didn't realise the firmware would be tied to AT&T, so when I tried to install the firmware from another carrier using LGUP, I was surprised to find it just wouldn't work and always gave up before it hit 10%. (I tried using the LG Flash Tool, but couldn't get it to work on my Windows 10 PC.)
Reading through the forum, I appreciate buying a pre-paid AT&T SIM might - only might - work, but I'd much prefer to source an AT&T Android 10 image or else use software that will let me install an Android 10 image from another carrier.
Given that an AT&T Android 10 firmware does exist, I'm surprised it is not available to download from somewhere. Or that I can't just install a non-AT&T firmware.
Does anyone know of any further avenues I might be able to explore?
pfhastie said:
I recently purchased a LG G8 (LM-G820UM) from China. It is an AT&T branded phone, but works perfectly with my current UK SIM. It is running Android 9 (Software Version: G820UM10m), but when I try to update to Android 10 it says, "Current software is up to date."
I am used to updating the firmware on Samsung tablets and didn't realise the firmware would be tied to AT&T, so when I tried to install the firmware from another carrier using LGUP, I was surprised to find it just wouldn't work and always gave up before it hit 10%. (I tried using the LG Flash Tool, but couldn't get it to work on my Windows 10 PC.)
Reading through the forum, I appreciate buying a pre-paid AT&T SIM might - only might - work, but I'd much prefer to source an AT&T Android 10 image or else use software that will let me install an Android 10 image from another carrier.
Given that an AT&T Android 10 firmware does exist, I'm surprised it is not available to download from somewhere. Or that I can't just install a non-AT&T firmware.
Does anyone know of any further avenues I might be able to explore?
Click to expand...
Click to collapse
I saw on here if you remove your Sim card, then factory reset and don't connect to anything including wifi, so skip everything to get to the home screen. Then connect to WiFi and check for updates it works. I did it and boom, I had to go through about 5 updates, but it all worked. Not sure if it will work outside of the US, but it's worth a shot.
That sounds interesting. I'll give it a go and let you know. I am in the UK, but perhaps a US VPN might do the trick if it doesn't work for me.
pfhastie said:
That sounds interesting. I'll give it a go and let you know. I am in the UK, but perhaps a US VPN might do the trick if it doesn't work for me.
Click to expand...
Click to collapse
Good luck, it seems there some issue when it has a connection and it looks for updates during the setup and it breaks updates afterwards. So this is a workaround. I did all the updates consecutively, then rebooted and inserted my sim.
Gave it a good go. Full reset, skipped the intro pages, connected WiFi, but Software Update said I was up to date. Installed ThunderVPN (for apps & browsers), set it to USA and tried again, but same story. Then tried the whole thing again from scratch this time making sure I was on a US VPN prior to initiating the Software Update, but it was still the same ("Current software is up to date").
It is so disappointing not being able to bring this otherwise near-perfect phone up to the latest Android version, but I'm too short of cash to spend £10 on a SIM that only has a small chance of working in the UK. I'll just get on with my life and check back every now and then to see if one of the resident geniuses has come up with a fix.
pfhastie said:
Gave it a good go. Full reset, skipped the intro pages, connected WiFi, but Software Update said I was up to date. Installed ThunderVPN (for apps & browsers), set it to USA and tried again, but same story. Then tried the whole thing again from scratch this time making sure I was on a US VPN prior to initiating the Software Update, but it was still the same ("Current software is up to date").
It is so disappointing not being able to bring this otherwise near-perfect phone up to the latest Android version, but I'm too short of cash to spend £10 on a SIM that only has a small chance of working in the UK. I'll just get on with my life and check back every now and then to see if one of the resident geniuses has come up with a fix.
Click to expand...
Click to collapse
Did you ever got the update to Android 10 and if yes, how?
hugoprh said:
Did you ever got the update to Android 10 and if yes, how?
Click to expand...
Click to collapse
No, I never did. Planning on checking back every few months or so to see if there is firmware available, but I rather doubt there will as AT&T seem to have the phone tied down pretty well. On the plus side, coming from an Xperia Z5, Android 9 is excellent, especially battery life, and although Android 10 adds a desktop mode, I've heard of some people having problems, so I'm not worried I'm missing all that much. So many tech issues, so little time.
update lg g8 ATT
pfhastie said:
No, I never did. Planning on checking back every few months or so to see if there is firmware available, but I rather doubt there will as AT&T seem to have the phone tied down pretty well. On the plus side, coming from an Xperia Z5, Android 9 is excellent, especially battery life, and although Android 10 adds a desktop mode, I've heard of some people having problems, so I'm not worried I'm missing all that much. So many tech issues, so little time.
Click to expand...
Click to collapse
133/5000
You could find a solution, I have the same problem and I don't know how to update, I don't know if it would work if I bought the sim card
Likewise, got a deal on eBay and starting to feel I should've found out about the AT&T update troubles before purchasing smh
Did anyone ever figure this out? I'm in the same boat
BWA_Dallas said:
Did anyone ever figure this out? I'm in the same boat
Click to expand...
Click to collapse
I'd suggest looking in the 'guides' forum and following the 'how to cross flash' guide. Essentially, if you're using an at&t rom outside the us, then it's almost certain you're missing a few of the bands needed for you to have full coverage. It might be working, but there are probably some bands you're not getting.
So, the software / rom for your region is always the better one. If you successfully cross flash to that rom, you'll be better off.

No AT&T OTA Since May on S20 Ultra

I haven't received any OTA since I got the phone in May. My son's phone is stuck on July. I called AT&T and they said they sent an update to my phone, but it keeps saying it is up to date. AT&T pushed the update 2 days ago. I've tried Smart Switch on Windows and it says it is up to date. I've set the date forward 1, 2, 3 days and it still says up to date. It won't even check. It just comes back and says up to date. Any tips?
vincentw56 said:
I haven't received any OTA since I got the phone in May. My son's phone is stuck on July. I called AT&T and they said they sent an update to my phone, but it keeps saying it is up to date. AT&T pushed the update 2 days ago. I've tried Smart Switch on Windows and it says it is up to date. I've set the date forward 1, 2, 3 days and it still says up to date. It won't even check. It just comes back and says up to date. Any tips?
Click to expand...
Click to collapse
Download the latest firmware from samfw.com and flash with Odin
Or download using Frija here on XDA
*Detection* said:
Download the latest firmware from samfw.com and flash with Odin
Or download using Frija here on XDA
Click to expand...
Click to collapse
The issue is you cannot get AT&T firmware to flash. One of the AT&T features I need (only one actually) is Wi-Fi calling because I don't have great service inside the house. Outside the house isn't an issue.
vincentw56 said:
The issue is you cannot get AT&T firmware to flash. One of the AT&T features I need (only one actually) is Wi-Fi calling because I don't have great service inside the house. Outside the house isn't an issue.
Click to expand...
Click to collapse
Exactly it needs wifi. You can manually force it to look for updates in settings too when you have wifi.
AT&T also has special "update cell towers" can't recall what they call them. They're few but they are there.
All that said updates are overrated and can cripple your phone especially AT&T's junk.
You been warned.
I've run dinosaur Android's for years and never did a forced reload due to virus or trojan.
I'm still on Pie on my 10+ and it likey will never be updated as it runs well and looks great.
Q's scoped storage really sucks...
vincentw56 said:
I haven't received any OTA since I got the phone in May. My son's phone is stuck on July. I called AT&T and they said they sent an update to my phone, but it keeps saying it is up to date. AT&T pushed the update 2 days ago. I've tried Smart Switch on Windows and it says it is up to date. I've set the date forward 1, 2, 3 days and it still says up to date. It won't even check. It just comes back and says up to date. Any tips?
Click to expand...
Click to collapse
Well ATT suck un updates I have s20 ultra on ATT and I receive sep 1 update and I cheeked everyday for the updates and I gut it like 3 to 4 days ago. If you use smart switch it will always say is up to date the best thing y can say is just wait a bit more maybe in your area is a bit delayed in updates and also use the ATT sim card that was included in the box when you gut the phone that's my best advice since is hard to find the ATT Firmware's online
I used this post to flash with AT&T and I am now getting all the updates.
https://forum.xda-developers.com/galaxy-s20/how-to/g988u-g988u1-firmware-links-flashing-t4054133

I have been out of the game for a while but I was hoping one of y'all could help

My son had a T-Mobile branded S20 5G and I moved our service to Verizon. I paid his phone off and got it unlocked. Everything was working fine up until a couple of weeks ago. He did an update (didnt pay attention to what kind of update) and now he cant make or recieved calls or text (keepin mind the phone was working fine before this update). Attempts to call result in a message from Verizon saying that they cant authenticate his phone.
I *****ed at Samsung for a bit since his phone isnt rooted and even though its over a year old if a software update bricked it, I felt like they should have some ownership of the issue. It was a waste of time so now I'm back on the phone waiting for VZW tech support.
I think the issue is that its a TMO branded phone on VZW's network and everyone is pointing the finger at everyone else. My question is 2 fold.
1) has anyone ever experienced this before, and if so what did you do to resolve it and
2) I will attempt to root it and flash a ROm on it before I entertain buuying another phone.....hes got enough other **** hes dealign with financially he doesnt need to add a new phone purchase to his plate.
Any help would be much appreciated because I'm pissed the eff off at this point.
Yes we tried different APN settings...he walked into a VWZ store and they were able to get his data working but not voice or text....seems like something is out of whack with his radios). We also did a full factory reset.....same issue persists
I am not an expert on ROMs but I will give you my two cents. When I was playing with my unlocked phone, I realized that mine updated some CSC binaries as soon as I inserted the SIM. I saw some message for it updating the CSC code from XAA to TMB when I inserted TMO SIM on stock firmware. So my suggestion would be to try downloading VZW stock firmware from samfw.com and installing that.

Categories

Resources