Can anyone help me
I wan't Experienced Kernel for Note 3 Neo for version lollipop pleasee
N7505 lite
Me too plz
Mahmoudm.kamal said:
Can anyone help me
I wan't Experienced Kernel for Note 3 Neo for version lollipop pleasee
N7505 lite
Click to expand...
Click to collapse
I need it too
Up
I may start with a kernel project when I have time for it.
I am not that familiar with adding governors to kenrel source etc. and havnt done this since now but i will give my best for it.
also it will be only for n7505 untill samsung releases the LL sources of n750. I couldnt find them in samsung open source center when i searched last time
EDIT: first i will be releasing my Tab S Rom aftre that i may start with it :good:
timuralaskara said:
I may start with a kernel project when I have time for it.
I am not that familiar with adding governors to kenrel source etc. and havnt done this since now but i will give my best for it.
also it will be only for n7505 untill samsung releases the LL sources of n750. I couldnt find them in samsung open source center when i searched last time
Click to expand...
Click to collapse
Good Luck!
If possible, get rid of sec-battery-monitor kernel wakelock.
Please :fingers-crossed:
drivers\battery\sec_battery.c
Wait ..
I want it too!
Related
Tab3 7.0 ToolKit
Hey Folks i was wondering if guys would be interested a Tab3 7.0 ToolKit. (Windows) .
For all supported Tab 3 7.0 Variants: T110 / T111 / T210 / T210R / T211 / T217S
This would be new and fun project for me but would benefit you guys.
Features:
Root Your Tab
Install Custom Recoveries / ReFlash Stock recovery
Backup / Restore your Tab
Bring your device back to stock (Flash Stock + Unroot)
Logcat/ Bugreport
Let me know what you think? If anyone else would like to help me out that would be much appreciated.
That would be awesome
mkaymuzik said:
Tab3 7.0 ToolKit
Hey Folks i was wondering if guys would be interested a Tab3 7.0 ToolKit. (Windows) .
For all supported Tab 3 7.0 Variants: T110 / T111 / T210 / T210R / T211 / T217S
This would be new and fun project for me but would benefit you guys.
Features:
Root Your Tab
Install Custom Recoveries / ReFlash Stock recovery
Backup / Restore your Tab
Bring your device back to stock (Flash Stock + Unroot)
Logcat/ Bugreport
Let me know what you think? If anyone else would like to help me out that would be much appreciated.
Click to expand...
Click to collapse
waiting patiently
Very nice idea.
Gesendet von meinem SM-T210 mit Tapatalk
Awesome Idea! My little tablet has a lot of life left in it!
Tab 3 7.0 T217S
m,
sounds good, also including function to set up adb properly would be good. :good:
m
http://forum.xda-developers.com/sitesearch.php?q=toolkit
Would you folk want a muti platform toolkit?
Windows - Linux - OSX?
Windows please.
I use Windows myself.
Plus 1
Sent from my SM-T217S
Very Interested!
I recently received a t110 as a gift and I've already tried every custom ROM available (there aren't a ton of choices at the moment it seems). I'm still not done experimenting but all the flashing has introduced some issues and I find it hard to maintain a custom ROM and working custom recovery at the same time (without ending up in a recovery bootloop). I think a tool like yours would probably be very helpful and get a lot of use from me (guaranteed). I hope it's in the works! :good:
MarkChocolate said:
I recently received a t110 as a gift and I've already tried every custom ROM available (there aren't a ton of choices at the moment it seems). I'm still not done experimenting but all the flashing has introduced some issues and I find it hard to maintain a custom ROM and working custom recovery at the same time (without ending up in a recovery bootloop). I think a tool like yours would probably be very helpful and get a lot of use from me (guaranteed). I hope it's in the works! :good:
Click to expand...
Click to collapse
will be in the works. been busy with other these pass weeks -__-. i know keep saying it coming soon but not actually taking the time to do so.
Pretty much i need to do is get the lasted kernel, stock,recovery and rom for each devices also the custom recovery, kernel ect. This take a little time. Then create a script/menu to tell what to do ect
Thanks!
mkaymuzik said:
will be in the works. been busy with other these pass weeks -__-. i know keep saying it coming soon but not actually taking the time to do so.
Pretty much i need to do is get the lasted kernel, stock,recovery and rom for each devices also the custom recovery, kernel ect. This take a little time. Then create a script/menu to tell what to do ect
Click to expand...
Click to collapse
Hey no worries . The fact that you're taking the time out of your schedule to do it at all is enough for me to say thanks and wait patiently for whenever you're able to get it all done. I've got a lot of appreciation for any and every developer who takes time out of their lives to provide people with some of their hard work for free. I think everyone should. Cheers!
Mark :good:
Yes! This would be a great tool! For this neat tablet.
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Dudzzz576 said:
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Click to expand...
Click to collapse
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
x3m_zion said:
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
Click to expand...
Click to collapse
dont know, still testing
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
How is it going? Any news for us?
danny02 said:
How is it going? Any news for us?
Click to expand...
Click to collapse
i decided to suspend the project because of school though
Estamos presos no Android 4.4.4 =/
Maldito SM-T116BU
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
mmacedoc7 said:
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
Click to expand...
Click to collapse
hi! you can read here https://forum.xda-developers.com/galaxy-tab-3/development-7/rom-tab-3-lite-sm-t116-goyave-t3537793
pit file
Can anyone help me find pit file for galaxy sm-t116NU??????
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
deranche said:
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
Click to expand...
Click to collapse
What exactly are you trying to do?
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days ??
deranche said:
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days
Click to expand...
Click to collapse
Guys please give the firmware rom for TVRP on the TAB-3 Lite SM-T116 ! Cause when I for some reason flashed TVPP I realized that there are no custom firmwares for this device , But I need 100% working FI-WI, and cyanogen mod does not fit, cause Wi-Fi doesn't work there!
Good afternoon, I thought to work a custom rom based on cyanogenmod 11 (cm11) @wulsic in the fame lite gt-s6790l, Some developer here could lend a hand since for this device there is no rom.
ivankhalifaxd1 said:
Good afternoon, I thought to work a custom rom based on cyanogenmod 11 (cm11) @wulsic in the fame lite gt-s6790l, Some developer here could lend a hand since for this device there is no rom.
Click to expand...
Click to collapse
@ivankhalifaxd1 Sorry for the late response I'm busy with my school, internship, relationship and life things so I barely have time to work on it. I do know certain things,
The easiest and fastest way for a custom rom for the S6790 is ofcourse to debloat stock rom and tweak the stock kernel (Watchout this might be dangerous)
If the galaxy fame lite has multiple revisions watchout! I've also had some cases where the touchscreen stopped working as Samsung was such a DEV UNFRIENDLY provider by providing kernel sourcecode while sending out multiple revisions of the fame with same touch screen drivers, BUT probably found some cheaper way and or made some revisions a bit different while there source code matched when I compared it so put a notice if you start compiling such things and if people take the risk, well it got called development and a warning after all.
Since the Fame lite is pretty much different as it uses anoter chipset and I believe also another gpu it's not possible to use it sourcecode, maybe tiny bits if it equals much with things like ramdisk as budget models are mostly based of other budget models.
Fame lite uses BCM21654 chipset
Fame uses BCM21654G chipset
So there is a difference, the difference like with code god knows what as BCM21654G code is still disclosed and for jellybean etc it needs some dirty patches/back porting to get it working again.
My advice to save alot of unneeded efforts is to work together or politely ask as devs also have a life or he could also port it for you (Probably no). Find phones with the same chipset(bcm21654 SO NO bcm21654g to spare you some waste of time) and find out what custom roms exist and development and even contact the developer for further information/experiences.
Tiny bit of googling led to:
Similair devices Samsung Galaxy Pocket Plus & Samsung Galaxy Music?
https://github.com/Alonso1398/android_kernel_samsung_coriplus
https://www.raspberrypi.org/forums/viewtopic.php?f=73&t=71136
For further help needed I can help but might not respond 24/7 depends on rom flashing and free days/vacations
It's 00:07 so I'm out a here:good: enough xda 4 today
ivankhalifaxd1 said:
Good afternoon, I thought to work a custom rom based on cyanogenmod 11 (cm11) @wulsic in the fame lite gt-s6790l, Some developer here could lend a hand since for this device there is no rom.
Click to expand...
Click to collapse
Hello how are you?, i managed to install cwm custom recovery for the fame lite, there is any custom roms for this phone?
Hi,
I would like to know if I'm missing anything with the crossporting method I've seen for MT67xx devices. I've been trying to port MIUI 9/MIUIpro9 ROMs from Redmi Note 2 (hermes, MT6795) for Jiayu S3 Advanced (MT6752) but I can't seem to make it boot.
I've tried following this step from @sandeep.sethi and it didn't work. I tried adding a modification with some of the .rc files in ramdisk because I saw that there are still
HTML:
mount all/fstab.mt6795.rc
in them and replaced with
HTML:
mount all/fstab.mt6752.rc
and it still didn't work. I tried reaching out to the "Flare X (Same chipset, hardware with Jiayu S3 Advanced)" team in their facebook group but they're not willing to share their porting method.
Is there any other MT67xx porting method I could try? I'd really want to port a MIUI 9 ROM for Jiayu S3 and I've exhausted every porting method I know and I still can't make it boot.
I've been porting ROMs for MT6753/35 devices and I tried somehow doing the same thing with Jiayu S3a (MT6752) and they won't work.
Sandeep.sethi's MT67xx Porting Method: Here
MIUI 9
RuffneckFlex said:
Hi,
I would like to know if I'm missing anything with the crossporting method I've seen for MT67xx devices. I've been trying to port MIUI 9/MIUIpro9 ROMs from Redmi Note 2 (hermes, MT6795) for Jiayu S3 Advanced (MT6752) but I can't seem to make it boot................................................. I've been porting ROMs for MT6753/35 devices and I tried somehow doing the same thing with Jiayu S3a (MT6752) and they won't work.
Click to expand...
Click to collapse
well I guess you have a chance by contacting the developer of this ROM: MIUI V9 (needrom)
gorillaz_gr said:
well I guess you have a chance by contacting the developer of this ROM: MIUI V9 (needrom)
Click to expand...
Click to collapse
Thanks, I've already made contact with the one who ported that ROM prior to your response and he has given me some helpful information regarding the ROM.
http://en.miui.com/thread-208424-1-1.html
Does anyone have LineageOS for Samsung Galaxy Tab A6?
this tablet no new custom rom for this device to upgrade Android 10 or 11 , while Samsung Galaxy j5 has Lineage os 17 and 18
Please build custom rom for this device, anyone can do
Sorry that nobody replied.
You need to make your own custom ROM from scratch.
Besides, it's probably going to be a bit slow.
Hello, Thank you to answer my post about SM T280
I wanted to build this But I don't have complete guide to build ROM and I don't know how to start I have seen some videos and sites about building ROM but didn't helped and faced me some errors specially in REPO SYNC STEP
I'm a new member. You have a better chance of getting a good reply if you ask in this thread:
[ROM][LineageOS-14.1] Samsung Galaxy Tab A 7.0 - SM-T280 (gtexswifi)
Hello all! I've got the ROM working. Only problem is that once I add a google account and restart, I start to get the "Custom Binary blocked by FRP lock" message. Any way to disable FRP before the first reboot? Or force FRP to allow the custom...
forum.xda-developers.com
T2100-0 said:
I'm a new member. You have a better chance of getting a good reply if you ask in this thread:
[ROM][LineageOS-14.1] Samsung Galaxy Tab A 7.0 - SM-T280 (gtexswifi)
Hello all! I've got the ROM working. Only problem is that once I add a google account and restart, I start to get the "Custom Binary blocked by FRP lock" message. Any way to disable FRP before the first reboot? Or force FRP to allow the custom...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks I have seen this
Maybe I find a way to build Lineage OS 17.1 for this tablet
So Be patient...!
COMING SOON.....!
I'm using this rom
striker59 said:
I'm using this rom
Click to expand...
Click to collapse
Thanks but this is not enough Google no longer supports Android 5.1.1 We need to create new Android for this device to create this we must know how to create device and kernal tree for this device unfortunately there is no clear instructions to build for such devices and I have no knowledge
I asked for some developers but they said that the chipset of this tablet is speedtrum not Qualcomn and building device tree for these chispset is hard and so on
striker59 said:
I'm using this rom
Click to expand...
Click to collapse
The latest build is lineage 14 but this Rom has some bugs the best point for this Rom is that you can use your SD Card stoarge as your internal stoarge so you can install a lot of apps with large sizes it depends for your SDCard stoarge But the big problem is about Googleplay services some apps couldn't run without Google Play like Duolingo
As a result If you want install apps that need google play you should install official Rom with lack of stoarge if you want install alot of apps you should use lineage14 but no google play support and you have some bugs
I created new device tree for this tablet but has errors during the build I put my device tree link so please someone help to edit or upgrade it that is all I know maybe I continue it later
GitHub - Ali-Git-Official/android_device_samsung_gtexswifi
Contribute to Ali-Git-Official/android_device_samsung_gtexswifi development by creating an account on GitHub.
github.com
Zhao li said:
I created new device tree for this tablet but has errors during the build I put my device tree link so please someone help to edit or upgrade it that is all I know maybe I continue it later
GitHub - Ali-Git-Official/android_device_samsung_gtexswifi
Contribute to Ali-Git-Official/android_device_samsung_gtexswifi development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Use _mone's tree or something.
I'm trying to port the A 10.1 (2016)'s ROM to the T280, building a ROM from scratch is hard for me.
T2100-0 said:
Use _mone's tree or something.
I'm trying to port the A 10.1 (2016)'s ROM to the T280, building a ROM from scratch is hard for me.
Click to expand...
Click to collapse
Good luck Thanks
Please add option to select SD card as internal Stoarge .It is Mandatory option for this tablet
T2100-0 said:
Use _mone's tree or something.
I'm trying to port the A 10.1 (2016)'s ROM to the T280, building a ROM from scratch is hard for me
Click to expand...
Click to collapse
Yes also for me is hard because we have no complete guide for creating dt .
I am trying to build Android N lineage or other projects first then build for higher versions. we have also some bugs for cm14 however I have solved mone's rom issue about Restarting Randomly it was very effective .The tablet will not restart anymore
Lineage OS 14 T280 bug: Prevent from Restarting Randomly
Hello I find a way to show you about the bug I'm using CM14 for Samsung Galaxy Tab A6 (T280)that was created by mone the last version of android for this tab I don't know you have faced this error before but when I'm using this Rom and work...
forum.xda-developers.com
Zhao li said:
The tablet will not restart anymore
Lineage OS 14 T280 bug: Prevent from Restarting Randomly
Hello I find a way to show you about the bug I'm using CM14 for Samsung Galaxy Tab A6 (T280)that was created by mone the last version of android for this tab I don't know you have faced this error before but when I'm using this Rom and work...
forum.xda-developers.com
Click to expand...
Click to collapse
Mine only restarts if it's doing a hard task. In _mone's first build, the red lines stopped it restarting.
Zhao Li:
Click to expand...
Click to collapse
Good luck Thanks
Please add option to select SD card as internal Stoarge .It is Mandatory option for this tablet
Click to expand...
Click to collapse
I'm not the best at porting. It's just easier to do.
If you want, you could make a version with an option like that.
T2100-0 said:
Mine only restarts if it's doing a hard task. In _mone's first build, the red lines stopped it restarting.
Click to expand...
Click to collapse
Yes you're right My tablet restarted again and the method did not work either
So I returned to lollipop.
T2100-0 said:
the red lines stopped it restarting
Click to expand...
Click to collapse
What is the red line that you mentioned?
T2100-0 said:
If you want, you could make a version with an option like that
Click to expand...
Click to collapse
How?
Zhao li said:
What is the red line that you mentioned?
Click to expand...
Click to collapse
In _mone'sold LOS 14 builds, sometimes red lines flashed around the edges around the screen.
Zhao li said:
How?
Click to expand...
Click to collapse
I'm going back to building. I'm just going to build LOS 16 for the T280. I don't want to put too much strain on this tablet.
T2100-0 said:
I'm going back to building. I'm just going to build LOS 16 for the T280. I don't want to put too much strain on this tablet.
Click to expand...
Click to collapse
Any progress my dude?
Zhao li said:
Thanks I have seen this
Maybe I find a way to build Lineage OS 17.1 for this tablet
So Be patient...!
COMING SOON.
Click to expand...
Click to collapse
Some months later ..and ?