Develop Bugs

ZTE n721 recovery required

hello sir,
first of all sorry for my bad english as i dont knew too much and m not professionnal...
I have a ZTE n721 android 2.2.2 froyo with
Baseband :- ZTE-U N721_H3_Z11_E_TSECD213B
KERNEL :- [email protected] #2698-
i want to know how can i root my phone phone and please tell me a suitable custom recovery for it..... and a custom rom as i am bored with my rom or if i can upgrade it android 2.3 gingerbread..... also send me download link....... pls rply fast as it is very urgent..
Thank U

rjrishab said:
hello sir,
first of all sorry for my bad english as i dont knew too much and m not professionnal...
I have a ZTE n721 android 2.2.2 froyo with
Baseband :- ZTE-U N721_H3_Z11_E_TSECD213B
KERNEL :- [email protected] #2698-
i want to know how can i root my phone phone and please tell me a suitable custom recovery for it..... and a custom rom as i am bored with my rom or if i can upgrade it android 2.3 gingerbread..... also send me download link....... pls rply fast as it is very urgent..
Thank U
Click to expand...
Click to collapse
unfortunately there are no custom ROMs for your phone
all you can do is to root remove/add your apps and make a nandroid backup
this will be your "custom rom" I understand your frustration
you can try to root it by SuperOneClick
activate USB debugging on phone before better read thread above

thanks i have done rooting but how can i install a custom recovery for it..?
pls tell sir ... rply fast

rjrishab said:
thanks i have done rooting but how can i install a custom recovery for it..?
pls tell sir ... rply fast
Click to expand...
Click to collapse
did you use SuperOneClick or other tool to root?
believe me there is no CWM or custom ROM for your phone
I understand your frustration I was the same situation a few months ago when I buyed an Alcatel phone similar with yours in specs..but no custom ROM there..what to do ..so I made a custom ROM here
but believe me this is not easy at all because ZTE/ Alcatel are not well-known so no tools to prepare custom ROMs for these phones !
I will tell you the most important thing
never flash ROMs not made for your phone because these ROMs have a kernel that can affect/destroy your phone !

that means sir i cant install any recovery so i can went to recovery .... pls tell if there is if only if one recovery for my model is there... ?? pls tell pls tell sir..
Thnku

rjrishab said:
that means sir i cant install any recovery so i can went to recovery .... pls tell if there is if only if one recovery for my model is there... ?? pls tell pls tell sir..
Thnku
Click to expand...
Click to collapse
but you should have a recovery mode on your phone shutdown phone then press power +vol down and wait even 1 min if nothing on screen touch it or press a button (if this is not working remove battery put it back and start again but with power button+ volume up )
this is recovery mode but not CWM recovery and I think you do not need CWM because this is used to flash custom ROMs so what to do with CWM if you do not have a custom ROM to flash it by CWM ?
I do not want to tell you how to flash a CMW by fastboot because you will make a mistake and flash a CWM that is not made for your phone ...
believe me CWM is not useful you don't have a custom ROM to flash it by CWM and I do not know one !

sir i have tried both the method for going into recovery but in the first method of pressing vol down+ power button makes my phone stick on boot logo but does not go into recovery mode...... and the next method when i press vol up+ power button i start getting vibrated continuesly until battery is taken out so sir pls tell me any method of installing recovery as i want to reflash its stock rom sir pls tell fast sir pls..
Thank You

Sir and pls tell me about the method of "how to flash a CMW by fastboot"
and sir i promise i will not flash a cwm i just want to reinstall its stock rom so sir pls tell or rply me fast pls sir its very urgent..
Thank You

rjrishab said:
Sir and pls tell me about the method of "how to flash a CMW by fastboot"
and sir i promise i will not flash a cwm i just want to reinstall its stock rom so sir pls tell or rply me fast pls sir its very urgent..
Thank You
Click to expand...
Click to collapse
you have menu/volup/voldown/power buttons check some combinations to enter fastboot when in fastboot mode your screen is blank/black no logo there... only sensors buttons are active!
i.e.
Turn off the phone. Then press Power shortly. Then press and hold Vol down Menu and Power . This should enter fastboot mode. Then connect your phone to computer and follow the rest of instructions.
I can't tell you more because I do not have this phone ...
when entering fastboot mode connect phone to pc and open cmd.exe in adb.exe folder usually \android-sdk\platform-tools\ also do not foreget to copy in this folder your recovery.img
then enter from cmd.exe console this command
Code:
fastboot flash recovery recovery.img
done.. you have recovery installed find a key-combination to enter recovery now you can flash but where is recovery and stock rom ?
maybe you have a sync/update software to check for an update from manufacturer site ?!
maybe you have an installation cd or user guide ? check it!
to open cmd.exe start/run/cmd.exe also to open cmd.exe in adb folder easy way is to use Total Commander and navigate in adb folder then in Commands menu you have an option Open command prompt window
for adb.exe ...you need to install Android SDK
PS do not tell me sir you are a polite man..
a good day to you Sir !
do not make the mistake to flash a rom or recovery not made for your phone !

Ok I will not say you sir but can i say you my friend..?
My Friend Its a very complicated method of installing recovery to my phone I also want if there is any easy method and if i can install cwm through rom manager..
And last thing I want to know is how to make a nandroid backup ..???
PLs tell me pls
Thank You

One more thing frustrates m is there any difference b/w custom rom and custom recovery of zte n721 and karbonn a1..??
Karbonn A1 specs:-
http://www.gsmguru.com/karbonn-a1-phone.html
I am asking You because actually i have karbonn a1 so if u know if there is any cwm recovery and custom rom for it and how can i flash stock rom to it through ODIN flashing software..??
And can I update its android 2.2 to 2.3..??

rjrishab said:
Ok I will not say you sir but can i say you my friend..?
My Friend Its a very complicated method of installing recovery to my phone I also want if there is any easy method and if i can install cwm through rom manager..
And last thing I want to know is how to make a nandroid backup ..???
PLs tell me pls
Thank You
Click to expand...
Click to collapse
It possible to flash CWM by rom manager if fact this is very easy you know.. but still nedd that recovery here is the problem and to make nandroid backup you also need that recovery to enter it and make backup from its menu
---------- Post added at 12:11 PM ---------- Previous post was at 12:10 PM ----------
rjrishab said:
One more thing frustrates m is there any difference b/w custom rom and custom recovery of zte n721 and karbonn a1..??
Karbonn A1 specs:-
http://www.gsmguru.com/karbonn-a1-phone.html
I am asking You because actually i have karbonn a1 so if u know if there is any cwm recovery and custom rom for it and how can i flash stock rom to it through ODIN flashing software..??
And can I update its android 2.2 to 2.3..??
Click to expand...
Click to collapse
ok I take a look at this and update this post !

Thank You for looking an eye on karbonn a1 and tell me about it first and one thing is this when i launched rom manager and click on flash cwm it shows me the list to select my suitable device:-
the devices which shows in my list are:-
dell streak
geeksphone one
huawei pulse mini
huawei pulse
huawei ascend 2
huawei ascend
huawei u8220/u8230
lge esteem
micromax a70
spice mi700, commtivalink n700 and more
Pls tell which should be suitable for me to select
Thank You

rjrishab said:
Thank You for looking an eye on karbonn a1 and tell me about it first and one thing is this when i launched rom manager and click on flash cwm it shows me the list to select my suitable device:-
the devices which shows in my list are:-
dell streak
geeksphone one
huawei pulse mini
huawei pulse
huawei ascend 2
huawei ascend
huawei u8220/u8230
lge esteem
micromax a70
spice mi700, commtivalink n700 and more
Pls tell which should be suitable for me to select
Thank You
Click to expand...
Click to collapse
you really want to do something with your phone but unfortunately none is good for your phone do not try !
to have CWM recovery you need sources for your phone to compile them
also a custom ROM can be made only by a person to have this phone because every feature/change needs to be checked on phone without a phone is very hard to do something
when you buy a phone be carefully read about available resources for it !
but I think Froyo is not bad at all !
also check some combinations to enter recovery usually phones come with a default recovery but you have to find how to enter it !
also you should post your question here

For Karbonn A1 to go to recovery mode PRESS POWER BUTTON + HOME BUTTON AFTER THAT U WILL SEE ANDROID LOGO WITH CROSS MARK ON THAT TIME PRESS CALL BUTTON. U WILL ENTER TO RECOVERY MODE.

When I switched off the phone and press ome button + power button my phone hangs on karbonn logo screen does any body having some solutions for this pls reply me fast urgent..
Thank You

important
rjrishab said:
When I switched off the phone and press ome button + power button my phone hangs on karbonn logo screen does any body having some solutions for this pls reply me fast urgent..
Thank You
Click to expand...
Click to collapse
can you please tell me which hd games will work on my karbonn a1

rjrishab said:
thanks i have done rooting but how can i install a custom recovery for it..?
pls tell sir ... rply fast
Click to expand...
Click to collapse
do at your own risk n Before doing this post plz make NaNdroid backup....
To download CWM 
recovery
http://forum.xda-developers.com/attachment.php?attachmentid=1199767&d=1342361641
go here n place it in ur sd card
now download recovery manager from here
https://www.box.com/s/9881b2c929816ccec296
Install and Open recovery manager and Allow Superuser permissions.
go to recovery tab and click on install recovery.
Browse to the img file you downloaded. Click install n wait.
click on reboot into recovery to check custom recovery.
You have custom recovery now. You can now enjoy flashing custom ROMs an Add-ons to make you device faster and better. But be careful of what you are doing or you may end up with a precious paperweight.

porting 2.3 on karbonnA1
i had success in porting the GB on our phone KarbonnA1 but the problem is that Wifi, bluetooth and network not working ? what should i do now ?
reply will be appreciated :good:

CWM 6.0.1.2 for N721
installable zip of CWM 6.0.1.2 for 2.6.32 kernel devices & temporary update.zip of CWM 6.0.1.2 made by myself.
I am working now on CWM 6.0.2 and CM7

please help help help gionee p3 stuck at boot logo..

hello guys..
i'm a new to all this android stuff. i have a gionee p3 stucked at boot screen.. with stock recovery but i have a nandroid backup which i had made earlier using carliv touch recovery based on CWM.. now i want to restore the backup but i cant install cwm or any update from recovery so that can restore the backup... i have also tried 'fastboot flash recovery recovery.img' but it gives an error 'partiton recovery not support flash... i have also tried this"" [HOWTO]- Performing a Nandroid Restore Manually using ADB"" http://forum.xda-developers.com/showthread.php?t=614016 but i got error after step 13 "nandroid-mobile.sh not found" what do i do now please help me.....thanks for giving me time....HELP...:crying::crying:

jackey31 said:
hello guys..
i'm a new to all this android stuff. i have a gionee p3 stucked at boot screen.. with stock recovery but i have a nandroid backup which i had made earlier using carliv touch recovery based on CWM.. now i want to restore the backup but i cant install cwm or any update from recovery so that can restore the backup... i have also tried 'fastboot flash recovery recovery.img' but it gives an error 'partiton recovery not support flash... i have also tried this"" [HOWTO]- Performing a Nandroid Restore Manually using ADB"" http://forum.xda-developers.com/showthread.php?t=614016 but i got error after step 13 "nandroid-mobile.sh not found" what do i do now please help me.....thanks for giving me time....HELP...:crying::crying:
Click to expand...
Click to collapse
Use Carliv touch recovery port tool to create the recovery for device.
Place the recovery.img to the Carliv Port tool folder.
Select manually and then it will prepare the recovery for your device.
It can auto-flash the recovery to the device.
But if it somehow fails, you try to use the SP Flash tool to flash the Carliv Touch Recovery.
Just simply load the scatter file of your device.
Check recovery and browse to the recovery prepared by Carliv Port tool.
Then flash the recovery.
Your problem should solved now.
I recommend after this you to do backup via MTK Droid Tool and prepare it for flash tool.
Hit Thanks if I Helped U

Can u plz explain a little more how to use carliv port tool and sp flash tool.. And what is scatter file and where do i find that for my device.. Stock rom for my device is not available on the net yet..

jackey31 said:
Can u plz explain a little more how to use carliv port tool and sp flash tool.. And what is scatter file and where do i find that for my device.. Stock rom for my device is not available on the net yet..
Click to expand...
Click to collapse
Im sorry, my bad.
I thought its a media-tek device but it is not.
SP Flash tool and MTK droid tools won't work for your device.
I'l research on the internet and will let you know.

I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...

jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.

Shivam Kumar Jha said:
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.
Click to expand...
Click to collapse
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch

wheres the rom please??
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
hiya jack im stuck in your same situation stuck on the gionee bootlogo. i need the update rom you mentioned above. please post a link in the direction i can pick it. thanks in advance.
best regards
ndagi

How can this help a soft bricked phone which is not goin anywhere on power up ?
I have a gionee p3 n I seem to have softbricked it tryin to flash a ROM on it n now its stuck at the Gionee logo if I power it up. Could u tell me how n wat I dowit it ???
trichards440 said:
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch
Click to expand...
Click to collapse

Shivam Kumar Jha said:
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.
Click to expand...
Click to collapse
trichards440 said:
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch
Click to expand...
Click to collapse
thnq so mch 4 d help Shivam.. it helped me in some simlr case..
thanku :cyclops: :good:

jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Would really help to know what files are contained in that ROM.zip file because for SP flash tool, you'll need scatter file and other files like system.img , boot.img etc

Plzzz Help Me...Friends Im New To this....
I've Gionee P3, I've rooted by using kingroot, and I've installed xposed installer,
And opened it then I open framework andbi clicked ins all/update but it is not correctly installed so I searched on Google how to install xposed installer on Gionee P3, I found one solution that is given in this link:
( I can't put link here) so plz search how to install xposed installer on Gionee P3? And you will see a video....
Now the problem is I've done all procedures on that video finally I opened xposed installer app and clicked install/update, it asked reboot your mobile and I clicked OK, then it reboots but suddenly it shows "Unfortunately Launcher has stopped" I've reset my mobile but still I'm having that problem.. Even I slide down and clicked settings that also shows "Unfortunately settings has stopped" Everything Has stopped on my mobile... So plz help me... How to solve this problem? Plz plz plz help me.... Thank-you....

Try installing xposed again and then uninstall... Do u have cwm installed? @Parthisathish

please help me....
my gionee p3 in unable power on after installed a new rom.....

help
I have gionee p3 and its bricked..
I tried everything its not connecting to sp tools and i cant get into recovery mode also please help me guys sorry for bad english
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Hey bro i have same problem and same mobile please send me the files you got rom.zip and scatter files

my gionee p3 s is unable to power on after install flashyfy app ........please help ..me what can i do now that days.....

[GUIDE] Root Android 5.1 lollipop

Hello there,
i have rooted my canvas a1 lollipop 5.1, so i came here to help you to root your lollipop 5.1 if you dont know how to.
-> download the UPDATE-SuperSU-v2.45
-> place the file in the sdcard
-> Reboot into your custom recovery
-> choose install zip, choose the downloaded zip file and install it
-> [if CWM recovery ask to fix anything like [fix system/xbin/su...] then select No
-> Reboot your phone and your phone will be rooted
//This method may be working for other android one devices, if working please comment here
//DONT POINT AT ME FOR YOUR BAD LUCK/MISTAKE
DOWNLOAD THE GIVEN ATTACHMENT

bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help

Cant help
jaspalsingh said:
bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help
Click to expand...
Click to collapse
Sorry i cant help you in this matter.

help
I'm new bro kindly help me I tried all ways to root my phone but can't hope this works
I have à1 with lollipop how to reboot to custom recovery.?

visit this page
http://forum.xda-developers.com/canvas-a1/help/guide-root-android-5-1-lollipop-t3064642

redirected to current page
I have downloaded the zip file what next .?? I placed it in SD card what shud I do now reply fast plzz

http://forum.xda-developers.com/canvas-a1/help/root-everything-scratch-extreme-t3066260
Read again the rooting process from the given link

Signature verification failed
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.

abuvbu said:
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.
Click to expand...
Click to collapse
Toggle signature verification in cwm and then install

Cant toggle signature verification
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.

abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need a custom recovery to flash SuperSU and you have the stock recovery.

i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??

abuvbu said:
i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??
Click to expand...
Click to collapse
Flash Philz recovery from here http://forum.xda-developers.com/cro.../tut-how-to-root-android-one-devices-t2928240 . follow this guide worked for me on android L

Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....

Custom Recovery Required
abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need to flash the file using a custom recovery.

abuvbu said:
Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....
Click to expand...
Click to collapse
No.this recovery only works on Android one phone.

Can you upload your "build.prop file " which is inside the system folder.
I need it. Actually my phone has been bricked, so i want android one default build.prop file.
Thanks for your help.

How to root
Can I use this file to root Micromax canvas spark 2 without unlocking the bootloader. Plz help me to root it...I tried kingroot many times with the latest and the old versions. .But all of them failed.

Help
my canvas a1 is running on 5.1.1
bro plz tell me how to boot into custom recovery mode.
because have read that to install custom recovery your device should be rooted?

Hi I have micromax e 471 , I want to root my cell, but don't know how to do it

Storage Layout and wifi problem

Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.

kinder771 said:
Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.
Click to expand...
Click to collapse
U dont have to flash the boot.img with flashify ...i had tried before to flash a recovery via flashify but it was not successful ...so you will have to try aroma kernel flasher to flash kernel/boot.img without the pc ...hers the link to it
http://forum.xda-developers.com/showthread.php?t=2413561

Great im gonna try this and ill telly ou
Thanks for your answer

Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.

kinder771 said:
Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.
Click to expand...
Click to collapse
1. go ahead and download the kexec kernel v10(old layout) if you are on old layout or the new layout one if you are on new layout
2. Download this Recovery App: AromaFM-KL Flasher(4.6)(ZeusKL v10+ only)
3.download arhd rom
4. go into fastboot anf flash the kexec kernel you download in step 1 via Fastboot flash boot Zeus.img(or the name of the kernel.img )
5.Boot into recovery (TWRP).
6. Now you install Aroma-KL.zip. When you do this aroma file manager opens in recovery.
7. In aroma file manager select the zip of your rom i.e arhd
8. Now after you select your zip in the previous step, aroma gives you a list of options. In this select install the zip.(let all the option which are selected as it is ...dont deselect any option)
9.exit aroma
10.reboot

Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx

kinder771 said:
Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx
Click to expand...
Click to collapse
No . I dont think so..(dont even try ...as ur hox may get hard bricked)
arrange for a computer for only this time ..and once you have flashed that kernel...you wont need a computer henceforth both for flashing a rom or a kernel you can do it via the aromma kernel

Ok then Ill try to get one.
Still thanks for all your help.

kinder771 said:
Ok then Ill try to get one.
Still thanks for all your help.
Click to expand...
Click to collapse
Dont say "thanks" hit the thanks button

You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help

kinder771 said:
You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help
Click to expand...
Click to collapse
Even i didnt knew that...thnx for your help
Did u succeed in flashing the aroma kernel flasher??

Yeah the boot gets flashed but for the rom i get : archive does not contain android-info/product.txt
Any idea on that?
Is it possible to flash Aroma zip via fastboot ? Whats the command to use ?
Thanks

Done I finally succeeded in transferring files to the HOX.
I am using twrp new layout (twrp big) so I booted in recovery, went to Mount and selected only Data then I transferred files from my tablet using "adb push (local) (remote)" !

Z1 compact restarting after flash stock room over cynogenmod

Hey ,
I am new here ! I rooted my phone then install clean cynogen 12.1 nightly on my phone ! I liked it overall ! But there was serious battery drain so i prefered to go to stock ! I made prf using stock 5..1.1 ,z1 locked dual recover and supersu 2.17 , without sign option tick !
I installed tht using cynogenmod recovery ! May be it hasnt installed good ! And now phn is continously restarting ! ( it goes till the language selecting option and again gets restarted ) plz help ! And suggest good rom ! Having good batteery life and having less system applications !

sp462308 said:
Hey ,
I am new here ! I rooted my phone then install clean cynogen 12.1 nightly on my phone ! I liked it overall ! But there was serious battery drain so i prefered to go to stock ! I made prf using stock 5..1.1 ,z1 locked dual recover and supersu 2.17 , without sign option tick !
I installed tht using cynogenmod recovery ! May be it hasnt installed good ! And now phn is continously restarting ! ( it goes till the language selecting option and again gets restarted ) plz help ! And suggest good rom ! Having good batteery life and having less system applications !
Click to expand...
Click to collapse
Download Dstriker to sdcard and flash in recovery. http://forum.xda-developers.com/son...velopment/rom-dstrikerz1-kai-rom-4-5-t2980761

levone1 said:
Download Dstriker to sdcard and flash in recovery. http://forum.xda-developers.com/son...velopment/rom-dstrikerz1-kai-rom-4-5-t2980761
Click to expand...
Click to collapse
For installing this rom , i cant go to my recovery !
And on pc to fastboot doesnt recognizes device , even its in fastboot mode (has blue light) , but it shows , <waiting for device >
Any ways to put new rom and run it smoothly ?!! Any ways plz help guys ! Can anything be done using pc ! ?!

sp462308 said:
For installing this rom , i cant go to my recovery !
And on pc to fastboot doesnt recognizes device , even its in fastboot mode (has blue light) , but it shows , <waiting for device >
Any ways to put new rom and run it smoothly ?!! Any ways plz help guys ! Can anything be done using pc ! ?!
Click to expand...
Click to collapse
Flashtool/Xperifirm. Flash ftf, then root and add recovery.
Flashtool - https://www.google.com/url?sa=t&sou...-A3_bQ1Be6jhX34rQ&sig2=xHVgD2d-B7mKzjfc7KP-pQ
Root with unlocked BL, (one of a few ways) - http://forum.xda-developers.com/sony-xperia-z1-compact/general/root-stock-5-1-ub-t3203247
Recovery - http://nut.xperia-files.com/

dear members ,
I am very thankful to all , As am noob i was unable to do it , I submited the device to local flasher , she did make it work again using some flash dongle ot tool <hardware> they had !