I Have an LG G2 - Sprint phone the LS980 , been experimenting with it lately , however the last experiment went all wrong
I flashed the stock Rom of the Indian version KDZ file using the LG 2014 Flash tool, I was able to boot but Obviously there were a lot of issues using the OS . However on the next reboot I was stuck in a fastboot loop.
While in the fastboot loop , I was able to erase all partitions one by one and flash back these specific to the ZVC firmware http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions/
Now I only have Recovery mode and even though I have recovery mode , I cannot adb sideload a file as the system keeps saying it cannot detect a device !
I also tried the Download mode , I can enter the Download mode , but the LG tool will no longer flash it.
Any suggestions ?
Was able to get Download mode going with LG Flash tool , but I now get this error.
ERROR: laf Partition has Changed
so the issues goes like that i was using cloudy 2.2 rom my varient was g3f400l i accedently installed 855 version from twrp the fone stated in fastboot mode . using fastboot i erased boot.img modem and recovery img laf.img and also reflashed those file flashboot gave error on partitiongt img file stating tha no file to flash so the fone did start with wrong rom that is d855 with a lot of errors i tried to falsh tot with flashtools it refused to flash stating that i am using wrong file so i edited build pro from d855 to f400l then i entered download mode connected flash tools i did start flash just after laf.img i gives an error stating unable to flash partion some thing like that and stops my fone is permanently in download mode when i turn it on the pc does detect it so as LG support tools but the KDZ flasher never worked for me nor the lg support tools they do download the right file but just as starts to updates it says disconnected check cable( same issue occured when my fone was working properly i tried to flash on windows 8 and windows 7 mechines ) any ways flashtools only flash laf.img and gives error and KDZ flasher for some wired reason didnt flash my fone before. i am thinking if some how i could enter the fastboot mode then i would manually flash all the files included system.img the fone would boot but how to i enter fastboot. and why the kdz never worked for me doesnt it work on win 7 and win 8 or is it the drivers what should i do help really appriciated thanks what if when falsh tools start to flash laf.img i remove the cable so laf.img cannot get flashed would that allow me to enter fastboot or there is any software that would work in download mode and manually flash all the img files plz help me thanks
satirg said:
so the issues goes like that i was using cloudy 2.2 rom my varient was g3f400l i accedently installed 855 version from twrp the fone stated in fastboot mode . using fastboot i erased boot.img modem and recovery img laf.img and also reflashed those file flashboot gave error on partitiongt img file stating tha no file to flash so the fone did start with wrong rom that is d855 with a lot of errors i tried to falsh tot with flashtools it refused to flash stating that i am using wrong file so i edited build pro from d855 to f400l then i entered download mode connected flash tools i did start flash just after laf.img i gives an error stating unable to flash partion some thing like that and stops my fone is permanently in download mode when i turn it on the pc does detect it so as LG support tools but the KDZ flasher never worked for me nor the lg support tools they do download the right file but just as starts to updates it says disconnected check cable( same issue occured when my fone was working properly i tried to flash on windows 8 and windows 7 mechines ) any ways flashtools only flash laf.img and gives error and KDZ flasher for some wired reason didnt flash my fone before. i am thinking if some how i could enter the fastboot mode then i would manually flash all the files included system.img the fone would boot but how to i enter fastboot. and why the kdz never worked for me doesnt it work on win 7 and win 8 or is it the drivers what should i do help really appriciated thanks what if when falsh tools start to flash laf.img i remove the cable so laf.img cannot get flashed would that allow me to enter fastboot or there is any software that would work in download mode and manually flash all the img files plz help me thanks
Click to expand...
Click to collapse
You can try this , It always works for me and this youtuber is great:
youtube.com/watch?v=1WgXuxDbmbc
satirg said:
so the issues goes like that i was using cloudy 2.2 rom my varient was g3f400l i accedently installed 855 version from twrp the fone stated in fastboot mode ....................................................................................................................................................................plz help me thanks
Click to expand...
Click to collapse
Hi there.
Sorry to hear you are having such problem.
Please check this thread out because the OP also flashed the wrong ROM on his phone but he found a solution to fix it http://forum.xda-developers.com/lg-g3/help/solution-flashed-wrong-model-rom-to-d852-t2987242
Let me know if this helped you please as I always feel sorry for people who brick their devices. Good luck.
Hi,
Since the rom ( http://forum.xda-developers.com/lg-g3/development/rom-resurrection-remix-lp-v5-5-5-t3198675 ) of my phone crashed. After reboot, the phone is blocked on LG logo. Now, i can't enter in recovery mode (or in the download mode) and when I start my phone, it's fixed on the LG for 5 to 10 minutes, and after that it goes to a terminal (started fastboot mode).
I have read several tutorials to use fastboot to flash the recovery to reinstall a rom, but i have a error when i tried to erase or flash the recovery partition.
I look on my phone, and this error appear : "failed to send erase grp start address".
what can i do to fix this error ?
Thanks.
up please
Use the "boot" command instead of "flash" and it should boot up into recovery or downloadmode, depending on which file you use
I tried but i am stucked on teamwin logo.
Which file do i use for download mode ?
Hard to tell, there are some laf.img files floating around on xda and google or even better, extract the laf.img from the stock kdz depending on your android version (for instance you flashed 6.0 you pick the 30b kdz and extract it with the firmware extraction tool)
I would suggest you to and try to use the boot command with them..
Be carefull, do not use the flash command until you found one that boots into downloadmode properly or you can loose your fastboot mode aswell
From then on you should be able to boot into the downloadmode and flash a new firmware via the lg flashtool
I need help please. What can i do to re install a rom ?
Does your PC recognise the port.?
I found tutorial under bender_007 signature. People seemed happy with tool.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Doesn't hurt to read and ask some questions.
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
th0was said:
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
Click to expand...
Click to collapse
Can you elaborate, how exactly your phone crashed, it is very unlikely that it will mess all the partitions just by crashing the rom?
The rom crushed twice, and now i can not access to recovery to install a new rom. I only have access to the fastboot command. Adb not working.
I tried to boot on recovery.img, but it's not working.
Thank for your help.
Regards,
Help please ?
Today i can connected to my phone with ADB when i tape this fastboot command : fastboot boot ./recovery.img.
I can too go into my phone as root with adb command : adb shell.
i tried to push flash_image on my phone and use it, but it donesn't work.
how can i flash my phone with adb command ?
I was trying to unlock the bootloader of my Xperia M dual. I used the official method everything was fine until the device went into bootloop. So i tried to install custom cyanogen recovery so that i would install cyanogen 12.1 as i did'nt have the net to download 700 mb for stock firmware.But idiot me ,instead of typing
Code:
fastboot flash recovery xxxx.img
i typed
Code:
fastboot flash boot xxxx.img
now i can only go to fastboot mode and nothing else.i tried to extract the real boot.img from the ROM but i encountered an error.My phone is blank and does not show anything and goes to fastboot and flashmode only please help!!!!!
in flashmode by using the flashtool flash the ftf file for your device thats it!!
i too have flashed many a time recovery in boot sector but in my case the recovery opens directly make sure the recovery you flashed was for your device i suggest use twrp lastest version..
Today i flash TWRP on my xperia, successfull and i can go to TWRP, but when i restarted my phone, my phone get stuck on sony logo, i have tried to flash via flashtool but failed error with system.sin, also i have tried to flash system.sin only via fastboot mode, and failed again show <remote: unknown chunk type>
can i someone help me to show how to flash my phone? via TWRP or anything else? im stucked pls help
sorry for my bad english