Related
Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
hi bro
robhuffster said:
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
hi bro, my question is, i have one L720T for unlock this, i need root with m919 ? and unlock with SPT BOX ???
robhuffster said:
Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
here
javed91214 said:
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
Click to expand...
Click to collapse
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
robhuffster said:
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
Click to expand...
Click to collapse
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
javed91214 said:
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
Click to expand...
Click to collapse
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Ive tried that
bigbyte.me said:
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Click to expand...
Click to collapse
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
robhuffster said:
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
Click to expand...
Click to collapse
I can only find a 4.3 ROM for L720T not any version before it.
So, just to clarify, do we have to use the ROM or can we do this on stock? I have two of these LTE-T marked phones from Straight Talk that I'd like to use AT&T Straight Talk SIMs with.
tried this on a stock tmobile mdl firmware with the mh3 baseband with no go.. What am i doing wrong?
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
imzjustplayin said:
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
Click to expand...
Click to collapse
Yes i have, Tracfone will have to provide an update to fix the issue. Reason is that everytime you enter the code its accepted. But as soon as you reboot the phone it asks for the code again. So not sure how tracfone will handle this.
Well I returned my $250 Black Friday special as I just have no faith in getting an unlock code for these Galaxy S4s as I wanted to use it on AT&T and I had picked up the Tmobile version. I'll have to settled for a used item instead.
So will this phone work with a straight talk att Sim and a tmo Sim as long as its through ST?
After fallowing all the steps I get to the 8 0's hit enter and it just sits at the screen, and says unsuccessful. Sgh-s970g bb:mh3 av:4.2.2
Anyone know of a pay site to unlock this device. The one legit one was for over seas and I'm in US. I tried offering straight talk money and they said this phone needs to be active for 5 more months before they'll provide me the unlock code. I guess you need 12 months of active service to be eligible for the unlock program. The only thing is, is it will only work on a straight talk T-Mobile Sim until then. Tia.
It DOES work. I installed the wikid v8 rom on a SHG-S970G this morning, opened region lock, unlocked modem, relocked modem rebooted, and entered my unlock code and BAM, Successful unlock. Thanks a grand! By the way i bought the unlock code on a 3rd party site. Im now running ATT on the phone.
Straighttalk will only unlock phones purchased on or after Dec 2013, currently active on ST Service & have been active for 12 consecutive months, if you call the unlock department you will be transferred to their automated information center if your phone is not eligible for unlocking, this is just to inform you of the requirements to unlock your device.
ST unlock
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Extrapolate to S5?
james4117 said:
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Click to expand...
Click to collapse
Do you think a similar technique can be applied to a Galaxy S5 from Net10/TracFone? I tried to use a S902L with my (Canadian ) Rogers SIM card and unsurprisingly, it didn't accept it
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
creepyncrawly said:
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
Click to expand...
Click to collapse
Isn't that what a sim unlock is? Correct me if I have it wrong.
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
creepyncrawly said:
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
Click to expand...
Click to collapse
Yes, but that's for 4.1.2 idk if it will work with 4.4.2 I just don't wanna accidentally ruin my phone. And I think you mean LJ2 not MJ2 and thanks that'd be great if you could keep me posted
emeianoite said:
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
Click to expand...
Click to collapse
Were any of them on 4.4.2?
blu422 said:
Were any of them on 4.4.2?
Click to expand...
Click to collapse
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
At one time, there was a free app on XDA called GalaxSim Unlock. For some reason, the developer pulled the free app download, and the only version then available was the paid version on Play. I have a copy of the free one from before it was pulled, and it works on the Captivate and the Galaxy S II, and some other galaxy phones, not sure which ones. So I tried it tonight on my wife's Note 2 which is running Stock NE5 with TWRP recovery and has the MC3 boot loader. However, the unlock failed, saying unable to read nvdata. So it's apparently a no go on this phone.
Bajanman said:
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
Click to expand...
Click to collapse
That only works if the contract the phone was in was not defaulted, and or you are the original owner of the phone.
re: sim unlock
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
jsdad said:
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
Click to expand...
Click to collapse
My sister sell her note 2 to me because she's gonna upgrade to samsung galaxy S5. It was an att and I'm using T-mobile.
I did check the baseband ver and It was i317UCUCNE5 (4.4.2 OTA). the question is it is safe to flash base band ver i317UCALJ2 using ODIN?
Can you do the step by step process and also links of the files and software did you use please? thanks
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
It's a network unlock, so you are free to use any GSM carrier. You can lock your sim card -- then a pin is required for your phone to connect to your carrier. It's the old skool method to stop unauthorized use, from the days before a lock screen pin.
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
trunks10k said:
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
Click to expand...
Click to collapse
Please let me know if it works. mine is galaxy note 2 4.4.2 NE5 baseband and I've done some research and they said that if you upload your firmware thru OTA there is a possibility that it will soft brick you phone due to unknown security reason.
I'm just waiting for conformation from some one that it's safe to flash J2 modem on a NE5 OTA
in the US, if your phone is more than 6 months old and your contract is in good standing you can ask for the unlock code. I don't know if Canada is similar.
I was going to post the same question about unlocking I317 4.4.2, and found this post which is similar to what I'm looking for so just want to add to pump the question.
It's been a while but I have done unlocking for other At&t models (S3, S4) and learned that later versions don't with the option in hidden menu to unlock, and the work around is to downgrade. However with devices that have OTA updates, it's not possible to downgrade the bootloader.
Is this the same for Note 2 I317? If so, any other method available to unlock this device to use it on other GSM networks? (I just bought one and it's on Kitkat 4.4.2 UCUCNE5, and looking for unlock...)
It's only the modem that needs to be flashed. So whatever bootloader you're on doesn't matter.
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
dmrfresh said:
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
Click to expand...
Click to collapse
What bootloader were u on?
Sent from the TermiNOTEr 2! ?
Hiya,
I currently have a Samsung Galaxy S3 locked to Bell, and I have installed Cyanogenmod 11.
I'd like to unlock it and give it to a friend.
My questions are:
1. If I unlock this phone, will it work with Zoomer Mobile? It's a subsidiary of Rogers. I would imagine it would work, I just want to make sure.
2. I've read somewhere that Cyanogenmod causes problems with unlocking, is that true? Will I have to go back to stock firmware in order to unlock it, then go back to CM11?
3. I can't seem to find any information about unlocking through Cyanogenmod... anyone have a link to a guide of some sort?
Thanks in advance for any help!
am pretty sure you have to be on stock firmware to use free unlock method. will try to search around with for more info
http://forum.xda-developers.com/showthread.php?t=2829415
http://forum.xda-developers.com/showthread.php?t=2922478
http://forum.xda-developers.com/showthread.php?t=2880571
err on the side of kindness
Tell us the bootloader version on your phone.
Once unlocked, it will run on all carriers except wind and mobilicity.
audit13 said:
Tell us the bootloader version on your phone.
Once unlocked, it will run on all carriers except wind and mobilicity.
Click to expand...
Click to collapse
Thanks, thats great to know! My bootloader version is I747MVLUEMK5.
Thanks for all the links mrrocketdog, looks like everything I need to start unlocking!
Since you are on the MK5 bootloader, you will have to flash back to stock, purchase an unlock code, unlock the phone, and flash back to your custom ROM.
audit13 said:
Since you are on the MK5 bootloader, you will have to flash back to stock, purchase an unlock code, unlock the phone, and flash back to your custom ROM.
Click to expand...
Click to collapse
Which version of stock, though? I can't remember what the phone came with since it was so long ago... I think it was something like 4.1 , but I'm not sure. Since I've since updated to 4.3/4.4, I'm also worried about bricking my device, because I've heard that flashing earlier roms with newer bootloaders can do that.
Which version of stock should I go with then? Thanks in advance!
Confirm that you have an i747m with mk5 bootloader and baseband. This can be done by using the Play app called Samsung Phone Info.
The stock i747m firmware is available on sammobile.com. Just search for the Bell sgh-i747m 4.3 ROM. You can flash it using Odin. Do NOT check anything except auto reboot and F.reset time. I recommend using Odin 3.07 and backing up your important data to your computer as flashing with Odin will wipe your phone.
Hello
I am currently running CM 12.1 on my SGS3 i747m.
I want to return back to stock rom, the current version offered by Rogers is Kit Kat 4.2.2.
Is this considered a downgrade? (from CM 12..1 to Android 4.2.2) Will I brick my device?
Is returning back to stock rom the only way I can network unlock my phone?
1) it is a downgrade in android versions (lollipop to kitkat. not bootloader/modem).
2) no , will not brick your device as long as not downgrading bootloader/modem.
3) what is your current bootloader/modem version ? (if unsure , you can DL the "samsung info" app from playstore and it will tell you).
http://forum.xda-developers.com/showthread.php?t=2609045
here's the xda thread for that.
4) i belive its the only free method. i think you can pay for an unlock code and not have to return to stock.
5) if returning to stock , here are directions posted by @audit13
http://forum.xda-developers.com/showthread.php?p=66306367
"err on the side of kindness"
So you're telling me I do not have to revert back to stock in order to network unlock? =D
That was my only reason for reverting back to the stock rom.
correct. but i've never had to unlock one so i wouldnt know where to go or how much the code cost.
"err on the side of kindness"
***update: i just bought an unlock code
didn't work. my phone says perso lock.
sigh
if i revert my phone back to stock rom, does the recovery have to be reverted too? or it's all good.
Recovery can be custom or stock. You need to revert to the stock Samsung dialler in order to enter an unlock code.
Easiest method would be to flash the latest 4.4.2 stock Rogers rom from sammobile.com, skip through the set up, power off, insert non-Rogers sim, boot phone, enter unlock code, done.
could I install stock rom via recovery or does it have to be through Odin?
so... I tried to install the stock rom via Odin3 as instructed on Sammobile... but it gets stuck in the glowing Samsung logo during boot.
any ideas?
try thru recovery :what:
"err on the side of kindness"
Did you perform a factory reset/wipe in stock recovery before booting the phone with the newly-flashed rom?
audit13 said:
Did you perform a factory reset/wipe in stock recovery before booting the phone with the newly-flashed rom?
Click to expand...
Click to collapse
i can't access stock recovery
I pressed power+vol up+home button. nothing.
although i get into download mode
i tried this: http://forum.xda-developers.com/gal...13-nightly-t3356062/post66306367#post66306367
and doesn't help =(
Are there any error messages in Odin? You're flashing the correct firmware?
audit13 said:
Are there any error messages in Odin? You're flashing the correct firmware?
Click to expand...
Click to collapse
So I went back to flash the latest stock firmware... and I was able to access the recovery and wipe cache and then factory reset/wipe! it worked!
=D
but I am having the same problem I started. I couldn't unlock my phone.
I entered the unlock code I got from MobileInCanada.com... and it still doesn't work.
I see that there is a free method for Android 4.1.1.
I am currently running Android 4.4.2
From Phone INFO app
Bootloader Version/PDA/CSC/Baseband: I747MWLUFOB3
Do you think I can revert back to Android 4.1.1 and try the free method? Or should I complain to the MobileInCanada about unlock code not working. Seeing as it looks like going back to stock, everything should be easy as pie to network unlock.
So you flashed back to a completely stock rom, inserted a foreign SIM card, you were prompted to enter the network unlock code, and it didn't work?
The imei in the phone matches the imei provided to mobileincanada? I have used mobileincanada but it was a long time ago. I get all my unlock codes from eBay because it's cheaper.
Do not attempt to flash any rom that is 4.3 or older as attempts to do so may hard brick the phone. Once an i747m is running a 4.3 or newer bootloader, the phone can only be unlocked with a code.
audit13 said:
So you flashed back to a completely stock rom, inserted a foreign SIM card, you were prompted to enter the network unlock code, and it didn't work?
The imei in the phone matches the imei provided to mobileincanada? I have used mobileincanada but it was a long time ago. I get all my unlock codes from eBay because it's cheaper.
Do not attempt to flash any rom that is 4.3 or older as attempts to do so may hard brick the phone. Once an i747m is running a 4.3 or newer bootloader, the phone can only be unlocked with a code.
Click to expand...
Click to collapse
Yes! completely right! I inserted my foreign SIM card, entered the unlock code from MobileInCanada and it didn't work.
I double/triple checked the IMEI.
Mobileincanada has a very good reputation. I recommend contacting them for a refund or have them resend the code.
Thank you!
would it be a different code?
If you supply the same imei, the code should be the same. Perhaps mobileincanada looked for the wrong imei in the unlock database.
The problem was resolved after flashing stock, reunlock, then restore. I will report if problems comeback.
Hello,
My phone was unlocked (not sure how, bought it second hand years ago) and used it fine on 4.4 custom rom. Ive updated it onthursday to the revolution 6.0.1 (with 3.0.2 twrp, nano open gappsa) and used it fine without problems on thursday.
However, yesterday, it lost cell signal and would not reconnect. So i rebooted the phone and now it is asking me to put sim unlock pin. What is the best course of action to get unlocked 6.0.1? I couldn't find an unlock method for 6.0.1. Should i backup rom, go back to 4.4, unlock, then restore?
Thank you.
It's asking for the sim pin or network unlock pin?
audit13 said:
It's asking for the sim pin or network unlock pin?
Click to expand...
Click to collapse
SIM Network unlock pin. My modem/bootloader is I317MVLBMA3. Do you think i can safely load a 4.1.1 rom and unlock again?
If i install phone info+ and look under secret codes, it does list the code for unlocking, but if i click on it, it gives me a blank page titled "service mode" but doesn't do anything (none of the three methods of entering work under the app). Probably because it is not stock ROM?
I tried searching for stock I317MVLALJ2 ROM to downgrade easily, but it seems like the link is down. I guess ill have to use ODIN.
EDIT:
Can I use TWRP to flash http://stockroms.net/file/GalaxyNote2/SGH-I317M/I317MVLALJ2_I317MOYAALJ2_RWC.zip stock ROM? Or do I have to use ODIN? I am assuming I can as it is a zip rather than img, and as long as I flash recovery right after flashing rom, I shouldn't lose recovery either?
Thank you.
The easiest way would be to flash a stock 4.1.1 rom in Odin. I am fairly certain you can downgrade as I think I downgraded from 4.3 or 4.4.2 on a Koodo note 2 so I could use it on Rogers. If it's not possible to downgrade, Odin will stop.
audit13 said:
The easiest way would be to flash a stock 4.1.1 rom in Odin. I am fairly certain you can downgrade as I think I downgraded from 4.3 or 4.4.2 on a Koodo note 2 so I could use it on Rogers. If it's not possible to downgrade, Odin will stop.
Click to expand...
Click to collapse
Thank you for the reply. I am currently on 6.0.1, but since modem is 4.4.2 ish, i hope that's okay. I will try ODIN. The zip i mentioned above is not a TWRP flashable zip, so I guess I have to use ODIN. The thing that worries me, though, is the fact that I cannot get to the recovery mode from off. I press and hold the volume up-power- home combo, but it keeps on resetting without entering TWRP. The only way for me to enter recovery right now is using a custom rom restart menu. If I go to stock ROM, I won't be able to access the recovery .
EDIT: If I let go of the power button at a certain time while booting, it seems to go into recovery just fine.. The problem is, that timing is tricky.
For flashing a stock rom, you need download mode so don't worry about getting into recovery.
To enter stock recovery, power off and try holding power, volume up, and home. Once the phone boots, let go of power but keep holding home and volume up until you see the dead android, then let go of all buttons.
audit13 said:
For flashing a stock rom, you need download mode so don't worry about getting into recovery.
To enter stock recovery, power off and try holding power, volume up, and home. Once the phone boots, let go of power but keep holding home and volume up until you see the dead android, then let go of all buttons.
Click to expand...
Click to collapse
Thank you. Flashed stock using ODIN, rebooted, showed samsung logo with music (stock boot animation), then the phone is stuck on SAMSUNG logo changing colors. Stuck there for the last 10 minutes... Not sure where to go from here ..
Boot into recovery and do a factory wipe.
audit13 said:
Boot into recovery and do a factory wipe.
Click to expand...
Click to collapse
Success. Thank you very much. So I've done the factory reset and successfully rebooted the phone. Then applied the unlock method, which seemed to have worked. Does not ask for SIM unlock pin. However, it does not seem to actually lock cellular signal. It still says 'Emergency Calls Only'. I am on Mobilicity, which used to be AWS, but now I believe is under Rogers. I know mobilicity used to take a while to connect, but I doubt that is the same now. This may be due to the old modem, so I will try updating the modem back to the 4.4 one... wish me luck
EDIT:
Without the modem update, it just connected to mobilicity !
Now the issue is, whether this phone will re-lock again once I flash 6.0.1...
Thank you very much audit13 for your live help!!
I will post back in a week or so (hopefully I remember...) whether this unlock sticks.
The 317m does not natively support was frequencies. You'll have to software enable was support.
You mean it doesn't ask for network unlock pin?
audit13 said:
The 317m does not natively support was frequencies. You'll have to software enable was support.
You mean it doesn't ask for network unlock pin?
Click to expand...
Click to collapse
Yup. It unlocked for sure. But that is no different than what I had before updating to 6.0.1. I've used the phone without problems on Mobilicity for 2-3 years.
Mobilicity is no longer AWS, so it has no problems connecting to the network. It just takes a while, especially with the 4.1.1 modem...
Now I'm just restoring the TWRP backup that I have made on 6.0.1 to see if the unlock sticks.
The unlock stayed for my phone when I installed a custom rom.
audit13 said:
The unlock stayed for my phone when I installed a custom rom.
Click to expand...
Click to collapse
Yes, that was the case yesterday as well. It stuck for a day, but after the cell lost the signal once (zero bars, emergency calls only), the phone got re-locked.
Now that I have restored the 6.0.1 backup, the phone is back up and running with it unlocked. Now ill will see how long this lasts.
Thank you very much for your continued support
I am having this issue now.. but the strange thing is that I've flashed to the Resurrection 6.0 rom a while back and it was working fine. Until a while ago I was pokemon hunting and all of a sudden my network died and its been asking me for a sim network pin... I was getting the intermittent network disconnect when I was on the Pokemon go app too long but it would reconnect back to the network after a short time.. not sure if it has something to do with the game app. Well, now I've downloaded the latest Resurrection rom and flashed it again doing a factory wipe but still nothing. I'm going to try and flash the modem and see if that helps.
EDIT: forgot to mention I'm on Koodo network which is also Telus, I believe. But now it wants to automatically connect to the rogers network hence I'm assuming its asking for the PIN.
(edited for grammar)
This is really strange that this happens. I've unlocked a few note 2 phones and none of them have relocked.
Did you change the csc in the phone settings to Koodo?
audit13 said:
This is really strange that this happens. I've unlocked a few note 2 phones and none of them have relocked.
Did you change the csc in the phone settings to Koodo?
Click to expand...
Click to collapse
do you know why I cannot do the universal unlock method by entering the *#197328640# method? when I enter those digits nothing happens..
EDIT: Forgot to mention that the newest Resurrection rom did not work so I tried DNA 4.4 rom and still asking for unlock pin.. damn. need a new phone it seems..
I believe you need to be running a particular version of the stock Samsung dialler.
audit13 said:
I believe you need to be running a particular version of the stock Samsung dialler.
Click to expand...
Click to collapse
What's the csc you mentioned?
Csc is a carrier customization file. If you change the csc, which can be done using a stock rom, you can choose the carrier for whom the rom phone was intended. I choose Telus as a carrier because they have very little bloatware.
audit13 said:
Csc is a carrier customization file. If you change the csc, which can be done using a stock rom, you can choose the carrier for whom the rom phone was intended. I choose Telus as a carrier because they have very little bloatware.
Click to expand...
Click to collapse
I'm using this rom
http://forum.xda-developers.com/showthread.php?t=2541860
which is a modded stock rom I believe but I don't know how to edit the csc file.