The screen is turning off when pressure is applied to back cover. Little jolt also turns the screen off. Anybody have had same problems?
My screen repaired twice. Bought in January. It did have some glitch
Related
Hi guys, cracked my note 2 glass last week and decided to replace JUST the glass myself. This included me warming up the screen with a hair dryer and replacing the glass. All went well, was VERY careful only to find out when I turn the phone on the screen is either blank OR white, and you can faintly see the boot logo. This alternates randomly when im prodding the motherboard. Does this mean there is a dodgy connection? Can I fix this, or have I completely melted the amoled when heating?
Forgot to add: Phone turns on fine, boot sound is there, capacative buttons light up. Even touch screen works (I can answer phone calls)
Thanks guys
My S3 has been working fine for months sort of. I bought it off of ebay with a huge crack in the glass, then my brother dropped it and all the glass fell out. To use the phone we has to touch the bare LCD of the phone, which after a while we just but a screen cover over it. I waited 2 months, bought a new glass replacement and put it on, everything worked just fine. After a little the home button when pressed to the left a little would make the screen go crazy. it would start tapping and swiping in random places. After locking and waking the screen the phone was normal again. after that, i removed the glass again, and this time when putting it back on if i pushed the home button it pushed the glass down a little, which would turn my screen black. locking the phone and waking the screen again turned the screen back on. Also the screen was a lot less sensitive, i'd have to tap a key 2-5 times sometimes to hit a specific letter. whenever that happened i put 3 dsi's to weigh it down and push the screen down, which would improve the sensitivity. that worked twice, and now my screen doesn't respond to touch at all. the screen will wake, but only when i press on the bottom right corner of the screen will it respond to touch. Any word on what could be the problem? i need to know what to buy to replace in the phone. I've already taken the whole phone apart and plugged everything back in, after i had tried everything to get my phone to respond. Could this be a digitizer problem, or an LCD problem? any possible fixes without having to replace anything?
The first issue was using the device without the glass installed. By touching the bare LCD you most likely damaged it. Your best bet at this point is probably going to be to replace the Touch assembly ( Glass / LCD Touch digitizer ) . Also keep in mind, when doing any sort of Screen replacement. Be sure to keep everything as clean, and dust free as possible.
So while walking downstairs to my basement, I tried to put my phone back into my pocket and it slipped and dropped on the hard floor. It dropped about 4 ft and it had a hard plastic case around it (one of the Korean model cases with the small section exposed though). The glass screen protector I had on it cracked, but the actual screen is fine. I tried turning the phone back on, but only the notification light comes on and it keeps blinking green and blue.
EDIT: So I guess the LCD is broken cause the digitizer is completely intact and there's no indication that the phone was even dropped. Usually its the other way around.....
sonicspear64 said:
So while walking downstairs to my basement, I tried to put my phone back into my pocket and it slipped and dropped on the hard floor. It dropped about 4 ft and it had a hard plastic case around it (one of the Korean model cases with the small section exposed though). The glass screen protector I had on it cracked, but the actual screen is fine. I tried turning the phone back on, but only the notification light comes on and it keeps blinking green and blue.
EDIT: So I guess the LCD is broken cause the digitizer is completely intact and there's no indication that the phone was even dropped. Usually its the other way around.....
Click to expand...
Click to collapse
Exactly the same thing happened to me. No visible damage, but screen wont come on. LED is blinking blue and green.
Do you have any new updates regarding your phone problem?
sonicspear64 said:
So while walking downstairs to my basement, I tried to put my phone back into my pocket and it slipped and dropped on the hard floor. It dropped about 4 ft and it had a hard plastic case around it (one of the Korean model cases with the small section exposed though). The glass screen protector I had on it cracked, but the actual screen is fine. I tried turning the phone back on, but only the notification light comes on and it keeps blinking green and blue.
EDIT: So I guess the LCD is broken cause the digitizer is completely intact and there's no indication that the phone was even dropped. Usually its the other way around.....
Click to expand...
Click to collapse
try to point a light on the screen if you can see some cracks...
FYI: i dropped mine 3 times (all face down) and it survived ?
From about 3 ft...
also i have the tempered glass screen protector plus a fake spigen slim armor on it ?
Sent from from my LG-D855
LittleCannon said:
Exactly the same thing happened to me. No visible damage, but screen wont come on. LED is blinking blue and green.
Do you have any new updates regarding your phone problem?
Click to expand...
Click to collapse
The only new thing that I discovered was that the backlight is probably broken. I can see a very faint image of the LG boot logo and the carrier logo when the phone boots up, but it just hangs there and the LED keeps blinking till the battery runs out/is taken out so I don't know what else is up.
EpicChineseTime said:
try to point a light on the screen if you can see some cracks...
FYI: i dropped mine 3 times (all face down) and it survived ?
From about 3 ft...
also i have the tempered glass screen protector plus a fake spigen slim armor on it ?
Sent from from my LG-D855
Click to expand...
Click to collapse
No cracks at all. The only crack I had was on my tempered glass screen protector. I thought it was the actual screen, but I took it off and the screen was unscathed.
sonicspear64 said:
The only new thing that I discovered was that the backlight is probably broken. I can see a very faint image of the LG boot logo and the carrier logo when the phone boots up, but it just hangs there and the LED keeps blinking till the battery runs out/is taken out so I don't know what else is up.
No cracks at all. The only crack I had was on my tempered glass screen protector. I thought it was the actual screen, but I took it off and the screen was unscathed.
Click to expand...
Click to collapse
Did you manage to repair it?
sonicspear64 said:
So while walking downstairs to my basement, I tried to put my phone back into my pocket and it slipped and dropped on the hard floor. It dropped about 4 ft and it had a hard plastic case around it (one of the Korean model cases with the small section exposed though). The glass screen protector I had on it cracked, but the actual screen is fine. I tried turning the phone back on, but only the notification light comes on and it keeps blinking green and blue.
EDIT: So I guess the LCD is broken cause the digitizer is completely intact and there's no indication that the phone was even dropped. Usually its the other way around.....
Click to expand...
Click to collapse
Take it back to and tell them that the phone just stopped working. I'm sure they will fix it under warranty.
Sent from my LG Gangster 3
Small update!
I have just receive phone from warrany repair.
Apparently, motherboard was broken!!!!
LittleCannon said:
Small update!
I have just receive phone from warrany repair.
Apparently, motherboard was broken!!!!
Click to expand...
Click to collapse
Ive just dropped mine from sitting on the loo, 2 foot drop if that and again, wont turn the screen on led flashed blue/green omg, not having a good day after being late for work cos the car ran out of petrol while I was scraping the windows, then broke the key off in the lock for the shed, had to break into my shed only to find the petrol can was empty, defrosted my wife's car and went n got some petrol in the can, fitted the filler pipe to the can, on putting the petrol in the car the pipe snapped off so had to go hunting for another, now I've just dropped my sodding phone gurrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
Ive just shined a light on it and it is on and working but screen is black without the torch, managed to turn brightness to full, no better.
Update, phone was deemed not repairable by my phone insurance through my bank so they sent me a brand new one yummy ?
Hi all-
My MZF went for a swim a couple weeks back. Put it in a bag with some DO NOT EAT desiccant packets for a few days, actually got it to turn back on, except the Power Button didn't work and the camera crashed every time I tried to open it.
I replaced the camera module and volume rocker/power strip with OEM used parts from eBay. Phone came back on, power button and camera worked, and everything actually seemed good until I plugged the phone in to charge.
I came back a little while later and the screen is black. Phone still vibrated on fingerprint touch, and when trying to power up/down with the power button. Did not come back on reboot, and every so often can see a very brief flash on the screen. No sound either. Thinking I somehow fried the display when I plugged it back in. Thinking about getting a replacement, but all the used ones on eBay are scratchy and/or burned in, and all the "new" "OEM" ones just seem shady.
Anybody ever done anything like this? Looking for any insight!
get a scratched screen and lay a glass screen protector on it this will hide some imperfections and prevent more. i replaced my screen once already and it waqs a pain but my moto branded part works great it came from a bad imei number
Found a decent OEM screen on eBay, didn't appear to be in too bad of shape. Definitely going to put a screen protector on it to help with any scratches. Sitting in my PO box right now, and and gonna try installing it this evening!
I am debating replacing mine. The screen scratched at the FFC and made any front pictures blurry. Did some rigging as a temp fix, but the camera sensor is now not covered by the plastic. If I do replace of, I'll do a tear down video. The screen isn't too hard to remove. Of almost came of when I ripped the protector off.
A week ago, my lumia 950 passed the hard landing on the asphalt. The effect was that the right bottom of the screen was firmly crushed. Quickly protective has not even been violated, the impact went centrally in the corner of the screen. Phone after this event, works normally: 100% efficient display, touch also. But the problem appeared during a ringing, after pressing the Call or Receive buttons, the screen immediately goes out. Additionally does not work on the screen when I cover the proximity sensor and when I turn off the screen, "Summary Screen" should appear on it; Time and notification, but nothing but a black screen. At first I thought that the guilty of this state is a cracked screen, but when I ordered a new one, the problem did not disappear. Then I replaced the whole ribbon with sensors I bought but it did not do anything. So it remained to restart the phone, which also did not help. Interestingly, after reboot, as I turned off the screen using the side button, you could see a summary screen for a second, but then I have not seen it anymore. I know that Era Lumia is a story but maybe someone once met with such a problem.