[HELP] WARNING! Current version is not available for user. - G3 Q&A, Help & Troubleshooting

Hello xda members!
Yesterday i just bricked my G3 D855. I wanted to flash the v21a kdz firmware on my device with LG Flash Tool but unfortunately i disconnected the USB cable from the phone while flashing. After when i tried to boot my phone i got this message at the LG logo: "Secure Booting Error! Cause: boot certification verify."
I searched on google and i found a program called BoardDiag 2.99a.
I followed the instructions in this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and after i got my phone boot into Download mode. I just flashed the v21a kdz firmware succesfully with LG Flash tool, but every time when i turn on my phone, after the PIN code it gives me a WARNING: http://i.imgur.com/FWASnak.jpg and i don't know how to fix it. And in the Phone information -> Software version is changed to v21a-GLOBAL-COM.
I searched for my problem on xda but i didn't find any helpful thread.
I hope someone can help me here.
Thanks in advance!

Hi
I had this on my D855 Taiwan version. I had installed the Euro version of D20h and got the exact same warning although the phone worked ok but it disappeared when I installed D21a which was for Taiwan region. I downloaded an app "LG Phone From" which gives information regarding which is the latest stock Rom for the phone. It appears that the warning is because the Stock rom is for the wrong region.
Stransky
Sent from my iPad using Tapatalk

Thank you! I will try it.

Heisenberg00 said:
Hello xda members!
Yesterday i just bricked my G3 D855. I wanted to flash the v21a kdz firmware on my device with LG Flash Tool but unfortunately i disconnected the USB cable from the phone while flashing. After when i tried to boot my phone i got this message at the LG logo: "Secure Booting Error! Cause: boot certification verify."
I searched on google and i found a program called BoardDiag 2.99a.
I followed the instructions in this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and after i got my phone boot into Download mode. I just flashed the v21a kdz firmware succesfully with LG Flash tool, but every time when i turn on my phone, after the PIN code it gives me a WARNING: http://i.imgur.com/FWASnak.jpg and i don't know how to fix it. And in the Phone information -> Software version is changed to v21a-GLOBAL-COM.
I searched for my problem on xda but i didn't find any helpful thread.
I hope someone can help me here.
Thanks in advance!
Click to expand...
Click to collapse
Yep take a look here to solve your problem your region as changed >> http://forum.xda-developers.com/showpost.php?p=56778696&postcount=3 <<

my wifi & bluetooth not turning on & no network
my wifi & bluetooth not turning on & no network
d855 after boot repair
& same error-Current version is not available for user.

Related

LG G3 D855 5.1.1 Security Error at startup

halp
Hi good people I got problem with my LG G3 D855 I don't know it's European or what but I'm using in south Africa when I'm trying to switch ON it says LG SECURITY ERROR and goes OFF it was rooted and visions was 5.1.1 I even try to flash it with LG flash tool but it's not conecting:crying: now i don't know what to do plz I need help plz
You can check this out.
Probably if you have access to custom recovery and you change the kernel could fix the security error.If not you could try to flash a stock firmware with flash tool and reroot your phone.
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
moon125 said:
Hi good people I got problem with my LG G3 D855 I don't know it's European or what but I'm using in south Africa when I'm trying to switch ON it says LG SECURITY ERROR and goes OFF it was rooted and visions was 5.1.1 I even try to flash it with LG flash tool but it's not conecting:crying: now i don't know what to do plz I need help plz
Click to expand...
Click to collapse
Surely you're not referring to the "Secure Boot Error"?
It happens for recovery access or affects the normal bootup too?
In both cases you have to put device in Download Mode and flash a "bumped" recovery (TWRP is highly preferable).
If the issue persists, you have to restore the stock rom with the LG Flash Tool 2014 by doing a "CSE flash" and lose all data.
If you not solve, your device is officially compromised and ****ed up.
The warranty won't guarantee assistance for broken phone with custom rom or recovery installed.

LG G3 Fastboot Mode Started Error

Hello,
Not new to flashing roms but, was recently running CloudyG3 2.5 Rom on my lg g3 D852 and wanted to switch to the kitkat version G3 1.2 during the installation I accidentally clicked on another version other than D852. Now the phone is stuck at Fastboot Mode Started.
I am unable to get into the recovery but, can access download mode. Currently there is no .kdz file for my carrier but only a .tot file. Using the LG FlashTool and the given proper .tot and .dll I tried flashing my phone and recieve the following error.
"Device Model Different"
Can anyone help me?
(XDA wont allow me to post links to the error from LG Flash Tool because I have under 10 posts)
KDZ's for Canadian variants are here?
http://lg-phone-firmware.com/firmware-Lg+G3-Tutti-41.html

LGD855 Changed to LS990 after flashing wrong rom.and wont go back

Hello Everyone I have a problem with my LG G3 which I have bought it recently was working nice but it had KitKat so I wanted to upgrade to lollipop but didn't know that LG G3 had different variant.
I've downloaded a wrong flash (LS990 sprint) and flashed it. so I lost the network and I noticed that the imei has changed. and I don't have the original IMEI of the phone ( the sticker on the back of phone is for D855 16GB not for D855 32GB).so I think its not the original IMEI.
After bricking the phone I've opened it and noticed that it was D855 written on the motherboard.
when trying to flash the original D855 rom it doesn't work (flashed it using the crossDLL method and using the Hex Method By changing D855 to LS990 to make the flash tool think Its LS990) the flash pass on both methods but i'm stuck on LG logo.
send it to some repairing services here in my country but they didn't fix it they thought its sprint so they flashed PrimeGSM but still no network.
I think I should change the IMEI before flashing D855 or something.
please Help me I've looked all over the NET but find no solution to this problem.
If you need more informations ask me. Help me as soon as possible this is the only phone that I have.
Did you ever figure out how to fix this? I have a ls990 which was flashed with PrimeGSM and is now detected as a d855... I have been trying to get this working for the last two days with no luck
Reply
Hello
What is the problem that you are facing ?
Is it a network problem or what ?
Primegsm is ported from d855 so i think it will show D855 on any lg g3 that does'nt mean that your phone detected as d855.
Make sure your phone is ls990 or another variant
And which country and carrier ? So i can help you.
I basically have a soft bricked phone - no OS as all. I am in New Zealand running on the Vodafone network.
I was using PrimeGSM and it was working fine but decided to go back to the stock ZV8, when running through LG Flash Tool I noticed Download mode was showing the model as a D855 and would not accept the LS990 DLL - I then made the mistake of using the generic DLL with a D855 image which started a boot loop - then made more mistakes and ended up with no OS and stuck at the LG logo.
At this stage I am able to get to fastboot and use fastboot boot to get into TWRP but cannot do much from there, I also have to use the D855 TWRP image as the LS990 fails with a device tree issue. fastboot will not erase any partitions or flash any images manually. Using terminal in TWRP I am able to browse the partition though but cannot mount the SD card or use adb to push or pull (fails with error closed)
I stuffed up quite a few times along the way but sure I can recover from it since I still have quite a bit of access to the device...
I managed to get my phone going again by following a guide I found in the forum, I am pretty sure it would solve the ops issue as well.
Really quick and easy, I just bridged the points with a needle and copper cable.

AT&T LG D850 stuck on download mode (posting after almost all possible ways)

Hello
I recently bought an LG G3 D850 32GB AT&T with version n, that is D85010n and while trying to get CM13 on it, i have got it stuck in download mode.
I have tried all possible solutions, searched on google, to get it recovered but I think its all about the firmware version conflict that the flashing fails.
1. The phone doesn't go into recovery or fastboot mode.
2. Trying to charge while turned off, results in entering download mode
The last resort i thought was the DLL and TOT flashing via flashtool but it failed too saying "Change Partition Error" [3 sec]. The firmware i used, and widely available is LGD850_V10D-xxx-xxx or LGD850_V10f-xxx-xxx. I dont seem to find the V10n version of the rom.
I am asking for help here please. Is there any way to revive the telephone? It was originally on kitkat 4.4.2, unlocked for other networks.
thanks

Camera &calling app not working on my g4 (Help)

Hello,
I have a lg g4 815h bought from ebay India and using in India for a few months back...it was working fine till yesterday. A pop up was coming for a system update since 1 month so I decided to perform the update ...so I allowed the update but as soon the phone rebooted and the android sign came it showed error.
After 5 mins nothing happned so i restarted the device it booted but since then the camera is is not working says unfortunately camera has stopped ,even my phone call pick up screen is not showing when there is a call to answer...
I can call some one but cannot end the call due to no calling screen is appearing.
I did hard reset but the situation is same...
Should I flash using lg flash tool ?any version works on windows xp?I only have a windows xp Pc...
Or please provide a solution which can be performed using recovery like twrp...
Please help...
Thanks in advance
If any advices to flash my device using twrp please also suggest me a simple and stable rom
file...
Thanks
Kind Regards
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
ur phone is REFURBISED?
karan5567 said:
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
Click to expand...
Click to collapse
open phone . take out mother board .. and read plaque model. if sprint flash sprint KDZ and LGUP. if H815 then do that .. thats the only way to be sure.
U have a refurbished model.Go to nearest mobile repair shop & take out your motherboard to see what model no is written on this.Then flash a rom accoringly. Don't flash any other rom just by assuming else you will brick your device.
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Any chance to root the phone and install twrp?
Then flash a custom rom?
Please help...
karan5567 said:
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Click to expand...
Click to collapse
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
asingha94 said:
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
Click to expand...
Click to collapse
Thanks for your reply...
Your network is locked?
You cant unlock it?
Can we degrade our Os to lollipop to get root?
Even I cant turn on the Enable OEM unlock under the developer mode...
Any more advices?
Please help.....
I have tried almost all h815 ans ls991 roms with all flashing methods but still unable to successfully flash my device...lg tot flash tool always show dl error after 4 to 6 percent of flashing...
Please help
Any idea's?
Pick the phone, and send it to the place where you bought it. If you have warranty the repair is free, if not, then you must pay sadly.
Still no solution, I even cannot enable OEM unlock under developer options...
It automatically disables it...
Please help
Just experienced this issue after changing sim card... Call and Camera stopped working over and over again.
How I solved it: Go to the specific app that is causing you trouble, and clear cache/files (too bad I only found this after 3 factory resets).
Maybe it will help ... LG G4 CAM

Categories

Resources