Related
Hello im on latest snapshot of cm12.1 and I want to ask how to install xposed on my device . I tried flashing xposed for 5.1 from xda but I ended up bootlooping. Thank you!
Flash the zip in recovery. Then install apk. good luck.
I think that's the zip that soft bricked my phone Anyway I'll try again thank you!
Have anyone tried that on latest snapshot?
Charlie said:
Have anyone tried that on latest snapshot?
Click to expand...
Click to collapse
I tried it yesterday when i flashed latest resurrection remix LP 5.1.1 ROM. It worked.
I used obb on sd module and it worked. Previously it also worked on one of the cm
snapshot builds. No bootloops. Maybe you are flashing any other kernel that is causing
bootloop. Clean flash once more. ROM+Xposed. If it boots then u can go on and install
gapps and any other addons.
Xposed v74 sdk22 makes bootloops on latest snapshot and v75 sdk22 doesn't. Tested and working fine. If You want more info about installing etc. I was writing about it in CM12.1 thread.
Chamelleon said:
Xposed v74 sdk22 makes bootloops on latest snapshot and v75 sdk22 doesn't. Tested and working fine. If You want more info about installing etc. I was writing about it in CM12.1 thread.
Click to expand...
Click to collapse
Thank you for the info :good:
Is there a version of Xposed that works with the Note 10.1 2014 edition running Samsung stock Lollipop v5.1.1?
Yes. Use the wanam's version for Samsung. I'm currently on his latest release (version 79 I believe) with otherwise stock Rom. You can find it at the top of the xposed section here on xda.
user68734 said:
Is there a version of Xposed that works with the Note 10.1 2014 edition running Samsung stock Lollipop v5.1.1?
Click to expand...
Click to collapse
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer. Meanwhile the latest ROM, the Singaporean ROM, does NOT work. Seems like they changed something somewhere that I haven't figured out yet.
Pact said:
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer. Meanwhile the latest ROM, the Singaporean ROM, does NOT work. Seems like they changed something somewhere that I haven't figured out yet.
Click to expand...
Click to collapse
Indian DOJ5 works fine
Wanam or Xposed?
Pact said:
I can confirm that the only the Spanish and USA stock ROMs work properly with Xposed, by installing Wanam's modified xposed app and installer.
Click to expand...
Click to collapse
I am a bit confused. Does Wanam's Xposed replace the default Xposed installer or is it just a module that is used by Xposed and has a lot of features that work on the Note 10.1? I have both installed on my Note 10.1 2014 edition but none of the features are working. The standard Xposed installer gives the following error ...
CANNOT LINK EXECUTABLE DEPENDENCIES library "libdvm.so" not found.
I saw this post in another thread about a file that needed to be installed but I have never heard anything about it and I am hesitant to flash it without learning more.
Hi guys,
2 Questions about XPosed:
1) Does it run normally on the common factory images?
2) Is there any version that also runs on the N developer Preview?
Thanks for your replies!
1. Works fine on MM for me, though I only use gravity box
2. I don't think so. Sorry.
I am on current stock MM for last 3 versions, I follow the rooting guide then install xposed works fine.
I not touched N yet
There´s no xposed framework for Android N available yet.
Hi mate,
As I can read in the forums Xposed is working properly on Pixel C, you have a bit more info here: http://forum.xda-developers.com/pixel-c/general/list-android-mods-recoveries-mods-pixel-t3291934 and no Xposed for Android N yet, too soon for that imho.
Also if you want to try Xposed, you have the official link here: http://forum.xda-developers.com/showthread.php?t=3034811
We should download the SDK23 arm64 for 6.0.1 and our Pixel C: http://dl-xda.xposed.info/framework/sdk23/arm64/
I try Xposed myslef after work.
Hope this help you a bit.
Hi again mates,
Xposed is installed and working flawlessly, atm I only install the following modules:
ChromePie-Test in progress
GravityBox-OK
YouTube AdAway_OK
YouTube Background Playback-OK
What modules are you using guys?
Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck
I could not get the V4A module to install under Magisk 12; however, it works just fine with Magisk 13.
This is the version that I used: https://www.androidfilehost.com/?fid=745425885120735287
Magisk Uninstaller (should not be needed, but if you want it) is here: https://www.androidfilehost.com/?fid=745425885120735289
NOTE: You are, I believe using the @tdhite kernel, which is based in Magisk 12. Not sure what the impact of installing Magisk 13 will be.
The kernel is fine with Magisk v13 (beta, to be sure is all that is released there). Magisk v13 beta still has problems, so beware. The SkyHigh kernel and module are v13 compatible as much as v12, just so you know. The reason v12 is packaged in is v12 is the only stable Magisk version at this point.
The bigger issue is Magisk v13 beta working stably and reliably, but if you are willing to debug its failures, it's ok. There should be no need to uninstall to upgrade if you want to play. Reloading the kernel flash will cleanly load up v12 if all goes badly.
Sent from my iPad using Tapatalk
@koop1955 Thank you for that information! I will bookmark those so I can get back to them once v13 is reliable and stable enough for my kernel
@tdhite Thanks bud as Well! I think I will just stay where I am until the kernel and v13 play nicely. Just got this thing as perfect as I can for now, well other than ram use creeping up, but that's only every now and then, and for another topic. I *might* get my nandroid current and play a little if I get bored and want to tinker. I guess I can safely assume then the reason Liveboot stops working with the V4A module installed is because of Magisk v12...?
Thank you to both of you guys for the help and advice. At least now I know it's not some dumb issue with my device lol.
Chuck
@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.
koop1955 said:
@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.
Click to expand...
Click to collapse
No doubt! Version 13 gives me something to look forward to for sure
Chuck
digitalchaos1980 said:
Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck
Click to expand...
Click to collapse
if you kindly Tell me the process how did you end up using Live boot in magisk , It would be very helpful . I have tried various method but failed
Saafir said:
Place a copy of audio effects.conf in vendor/etc. Should get you working. Be sure to set permissions as well.
Click to expand...
Click to collapse
Just to be sure, folks realize there is full equalizer support in my SkyHigh kernel and the bands are all adjustable, even per channel if desired, in Synapse, right? Just noting in case that's all you need, because it is a no-CPU-load way of getting it done.
Sent from my iPad using Tapatalk
I can't find anything on this so does anyone know of a working EdXposed version for our 7T that doesn't bootloop?
I would also like to know if somebody managed to get EdExposed working?
I tried Canary versions 0.4.6.3 (4552), both SandHook and YAHFA without success. I didn't get bootloop but only the notice about EdExposed Framework being installed but not active.
avalx said:
I would also like to know if somebody managed to get EdExposed working?
I tried Canary versions 0.4.6.3 (4552), both SandHook and YAHFA without success. I didn't get bootloop but only the notice about EdExposed Framework being installed but not active.
Click to expand...
Click to collapse
Working fine for me.
I'm using the stable magisk version 20400. The edexposed is sandhook , 4510 stable.
ashimiyy said:
Working fine for me.
I'm using the stable magisk version 20400. The edexposed is sandhook , 4510 stable.
Click to expand...
Click to collapse
Thanks, I'll try that version also.
Working fine for me as well, for a while. Just know that installing edxposed seems to kill any chance on safety net passing. At least lately.
Not sure if it's the same thing you are running into, but I was getting something like a SystemUI restart loop after updating OOS. It was only when using Gravitybox with the Master switch in Clock settings set to On.
My issue: https://forum.xda-developers.com/showpost.php?p=82828629&postcount=833
What resolved it for me: https://forum.xda-developers.com/showpost.php?p=82858097&postcount=839
I got it working using Magisk, but it caused my SafetyNet to fail