Related
My unrooted, stock Nexus 7 was on 4.4. I received an OTA notification about 5.0.1 so accepted the upgrade. After the reboot and seeing the Android with the open stomach, it fails with Error against the Android. All I can do is long power off/volume up to power off and then power on again. It then reverts back to 4.4.
After about an hour I received another 5.0.1 update, went the same process and received the same error.
Does anybody know what that could be? I guess I could factory reset the device there is nothing on the tablet that hasn't been saved in my Google account anyway.
Thanks
Wanted to say I experienced the same thing earlier today, except I didn't get an immediate second chance at the OTA. I have the wifi-only version of the N7 2013, and it is also not rooted.
Browsed around the net and various places to see if others had this issue, but no luck. Not really sure what the problem is unless the download got messed up somehow?
Same issue here. Download the update. It shows verified. Reboots, starts to flash and then the android error
Reboot and it is still 5.0
Happy to report that when I got another crack at the ota the update went fine. Still confused as to what could've caused the problem though.
Well it killed my N7 it seems. Got the error message then shut itself down. Now it won't boot up no matter what I do. Any ideas?
My update just stays in the notification area. After the failure I just power the tablet off with long press of the power button and volume up.
I am stock, rooted and unlocked. I used the WUGS toolkit to flash the stock recovery assuming that this is all that was necessary for the OTA to be recognized and accepted. After flashing back to stock recovery, I rebooted the device and told the OTA to update. It starts going through the process and dies with "Error!" and reboots back into 5.0. I tried using the WUGS toolkit to ADB sideload, but I have not been able to get it to work. At some point, it actually got into the Stock Recovery, but ADB wasn't able to contact the device (that only happened once). Every other time, it goes through the script and shows the Android on it's back with the exclamation mark, and below it says "no command."
The device works, but it's frustrating. I wish there was just a way to fastboot the OTA, or just do it via TWRP.
I'm anxious to hear how others work through this, as it appears that I'm not the only one.
kendoori said:
I am stock, rooted and unlocked. I used the WUGS toolkit to flash the stock recovery assuming that this is all that was necessary for the OTA to be recognized and accepted. After flashing back to stock recovery, I rebooted the device and told the OTA to update. It starts going through the process and dies with "Error!" and reboots back into 5.0. I tried using the WUGS toolkit to ADB sideload, but I have not been able to get it to work. At some point, it actually got into the Stock Recovery, but ADB wasn't able to contact the device (that only happened once). Every other time, it goes through the script and shows the Android on it's back with the exclamation mark, and below it says "no command."
The device works, but it's frustrating. I wish there was just a way to fastboot the OTA, or just do it via TWRP.
I'm anxious to hear how others work through this, as it appears that I'm not the only one.
Click to expand...
Click to collapse
Tried sideloading the factory image?
Sent from my Nexus 5 using XDA Free mobile app
Since my N7 is a secondary device (my main device is a N5 which received the Lollipop upgrade fine), I might just leave it on KitKat rather than muck around with sideloading Lollipop. KitKat works fine for me at the moment. But it's really annoying that a stock N7 cannot get an OTA upgrade and goes into an Android error state.
I was on 5.0 rooted with TWRP and got the same error trying to take the OTA. So I downloaded the rooted rom found here http://forum.xda-developers.com/nex.../rom-factory-stock-rooted-rom-lrx22c-t2960745 , used Wugfresh's NRT 1.9.9 to update the bootloader, and then dirty flashed the 5.0.1 rom with TWRP. Painless and fast with no loss of data or anything.
Same problem! I managed to workaround the issue by using fastboot replacing system.img boot.img recovery.img with stock ones!
chrismast said:
Tried sideloading the factory image?
Click to expand...
Click to collapse
Are you suggesting that I blow away what's installed and just update by doing a fresh install? would prefer to not do that.
I did download razor-lrx21p-factory-ba55c6ab.tgz (the 5.0 factory image) and extract the recovery.img for it, and fastboot flashed it, and the no matter what I end up in the Recovery bootloop with the android on it's back and exlamation point and "No command."
kendoori said:
Are you suggesting that I blow away what's installed and just update by doing a fresh install? would prefer to not do that.
I did download razor-lrx21p-factory-ba55c6ab.tgz (the 5.0 factory image) and extract the recovery.img for it, and fastboot flashed it, and the no matter what I end up in the Recovery bootloop with the android on it's back and exlamation point and "No command."
Click to expand...
Click to collapse
If I am not wrong, there is a way of flashing the factory image without wipe by modifying one of the scripts, never did it though myself.
Sent from my Nexus 5 using XDA Free mobile app
Turns out I was using the wrong key sequence for Recovery to get past that screen. Holding down Vol Up + Power for 3 seconds, then just pressing Power gets you to the right place. Am still having issues with OTA, as the system believes something was altered (install-recovery.sh). Others are saying that the way to do this is as described here: http://forum.xda-developers.com/showpost.php?p=57271130&postcount=423
kendoori said:
Turns out I was using the wrong key sequence for Recovery to get past that screen. Holding down Vol Up + Power for 3 seconds, then just pressing Power gets you to the right place. Am still having issues with OTA, as the system believes something was altered (install-recovery.sh). Others are saying that the way to do this is as described here: http://forum.xda-developers.com/showpost.php?p=57271130&postcount=423
Click to expand...
Click to collapse
jep, that's what I was saying earlier: factory image. For the 5.0.1 update you only need system.img and boot.img, at least that way it worked for me and my N7 2013 is running fine so far.
I dont get 5.0 on my nexus 7 2013, wifi, 32 Gb(flo, ktu84p)
I had stock rooted Rom, u Used tweaks like softkeiz etc. then I unrooted, locked boot loader and flashed stock recovery. Android lollypop rollout was about 2 months ago, but I don't get 5.0 ota. Now I'm running 4.4.4 stock rom , locked boot loader and I unrooted it with super user unroot option. Can somebody help me why I don't get my ota?? Thanks ^^
I know that's wrong thread, I didn't find thread for my question .
I just got my update!!!!!
German8835 said:
I had stock rooted Rom, u Used tweaks like softkeiz etc. then I unrooted, locked boot loader and flashed stock recovery. Android lollypop rollout was about 2 months ago, but I don't get 5.0 ota. Now I'm running 4.4.4 stock rom , locked boot loader and I unrooted it with super user unroot option. Can somebody help me why I don't get my ota?? Thanks ^^
I know that's wrong thread, I didn't find thread for my question .
Click to expand...
Click to collapse
Oh man! It's crasy, I was waiting so long, and exactly on this day when I write to thread I get my update!
EDIT: Never mind. I tried to do it via sideload, and it complained that the /System was too full. I rebooted, compared it to another Nexus 7, and the size was the same and free space was the same (and the other one updated fine). for the heck of it, I tried sideloading again, this time I formatted the cache first (no reason, just a thought) and that time it sideloaded correctly. So I'm up to date now... Weird.
I have the same issue. did a factory image install to 5.0. Now I get the update notification for 5.0.1 (as expected).
When I try to install it, it reboots, then I get "error" - have tried 3 times now. A reboot gets me back in the tablet, but am still at 5.0. This is my kid's tablet, so I have no need to root it or install a new rom, just want the dumb update to work correctly...
Jason
JasonJoel said:
EDIT: Never mind. I tried to do it via sideload, and it complained that the /System was too full. I rebooted, compared it to another Nexus 7, and the size was the same and free space was the same (and the other one updated fine). for the heck of it, I tried sideloading again, this time I formatted the cache first (no reason, just a thought) and that time it sideloaded correctly. So I'm up to date now... Weird.
I have the same issue. did a factory image install to 5.0. Now I get the update notification for 5.0.1 (as expected).
When I try to install it, it reboots, then I get "error" - have tried 3 times now. A reboot gets me back in the tablet, but am still at 5.0. This is my kid's tablet, so I have no need to root it or install a new rom, just want the dumb update to work correctly...
Jason
Click to expand...
Click to collapse
That is indeed strange...If you are pure stock it should work I guess? You could still try to sideload the 5.0.1 as well (did the same as I did not want to wait for OTA). You can do it without full wipe, just wipe cache in the process. (You need only to flash system and boot.img, wipe cache, reboot). Nevertheless let me know if you get the "error" solved, would be interested to know.
newkydawg said:
I was on 5.0 rooted with TWRP and got the same error trying to take the OTA. So I downloaded the rooted rom found here http://forum.xda-developers.com/nex.../rom-factory-stock-rooted-rom-lrx22c-t2960745 , used Wugfresh's NRT 1.9.9 to update the bootloader, and then dirty flashed the 5.0.1 rom with TWRP. Painless and fast with no loss of data or anything.
Click to expand...
Click to collapse
I was skeptical but this worked when I was having a similar problem to the OP Thanks. I have no idea how 5.0.1 is different though.
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error
Ok guys I am pretty sure I fubar'd my tablet.
I am stuck in a recovery loop. When I start the tablet it just goes back into recovery. Which if I still had TWRP I think I could still do something, but I flashed cyanogen recovery trying to flash cm13 since I cold not get anything else to work. I cannot boot into download/firmware update screen. The screen just flickers a little and goes dark.
A little background:
Started when tablet forced install of 5.0 update and I was in a recovery loop. I flashed 410 test build, rooted, flashed twrp, installed stock rooted ROM. Everything was fine. Then tablet did it again, this time I just flashed rooted ROM and factory reset. Even took the steps to fix the white lines and storage issues. Was working fine. Got home a few days ago and I was in a recovery loop again. But now I don't have the bootloader screen/download mode/firmware update screen (whatever you want to call it) so last night i tried to download cm13, Gapps and cyanogen recovery with no avail.
I can access adb on my PC while in recovery, but when I try to access ADB shell I get unauthorized something or other. Because I cannot authorize USB debugging, because ROM won't boot. I tried to flash stock rooted ROM from cyanogen recovery and it says not signed or something like that.
Does anyone have any ideas? I really think I have screwed the pooch here.
sent from a device using an app
title
if you have a stock recovery image flashing it is easy, i had a LOT of troubles with my v410 and still am working with it. i have mine rooted, just with TWRP though, i cant use xposed framework, which negates why i rooted this in the first place. anyway, through much grit and determination flash your stock image after wiping what needs to be wiped and doing all other necessary things. Then, you must download kingo root, supersu, superuser. flashify would help with the flashing i hear, but it has troubles with the v410. kingo root was an apk i managed to find buried under a million viruses on the 34th page of google..or something. rooted mine in one click, from stock to reboot to twrp root.. many glitches.
I need help myself, deleted my "Phone" system app, causing me to lose connectivity with my data plan. cant seem to restore it, and flashify nor twrp has been able to flash a custom recovery, or a backup, im at a loss.
Help? We seek the same thing.
Ok but how do I flash the stock recovery image. I can't use fastboot. ADB says I am unauthorized.
sent from a device using an app
Anyone have any other ideas?
I am at a complete loss. I am by no means a developer, but I do know my way around. I really think I have FUBAR'd this one.
Kind of stinks, I give up. Anyone want a bricked v410?
Sent from my Galaxy Tab 2 using Tapatalk
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct
Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,
Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse