Develop Bugs

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Unofficial Cyanogenmod 11 For Micromax Canvas 4 A210
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
This ROM is Built for Wiko Stairway Which is Clone of Micromax A210 by chrmhoffmann. I will help you to enjoy this on our phone.
Check Out the Original Thread and Press Thanks for His Unbelievable work HERE
Instructions.
1.First download CWM RECOVERY FOR THIS ROM
2.using mobile uncle tools app from play store flash it onto your phone
3.after the successful flash of recovery it is time to download CM11 ROM
4.once downloaded , go to your PC and extract the ROM using winrar
5.After the extraction
go into META INF > COM >GOOGLE >updater script
and delete that updater script
6.paste the updater script in the same folder provided below in next section and
7. select all folders(CTRL + A) in the main directory where meta inf and system and all are ..
and then right click and add them to archive using WINRAR
and select zip as for archive type
8.after zipping is done just place the ROM in your sd card
and flash it
as
in recovery mode
select wipe data /factory reset
select mounts and storage
format system
go back and in advanced and select wipe dalvik cache
and then
install zip via sd card
and reboot
and ENJOY!
Downloads
1.Unofficial Cyanogenmod 11 Version 0.17
2.CWM Recovery which Needs to be Used.
4.Updater Script which Needs to Flash
5.Gapps​
THIS THREAD IS NOW BEEN ABANDONED AND IS NO LONGER IN DEVELOPMENT BUT THE WORK MAY BE USED FOR FURTHER DEVELOPMENT
NO LONGER TAKEN CARE OF AS I HAVE A NEW DEVICE NOW
XDA:DevDB Information
[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - ) WORKING on CANVAS 4 ABANDONED, ROM for the Micromax Canvas 4 A210
Contributors
yogesh.kalyana, chrmhoffmann
Source Code: http://forum.xda-developers.com/showthread.php?t=2676086
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CYANOGENMOD
Version Information
Status: Abandoned
Current Beta Version: 0.16
Beta Release Date: 2014-09-18
Created 2014-09-18
Last Updated 2015-09-22

Reserved
Credits.
1. @chrmhoffmann For ROM
2. @NeroD
3. @HACKLEAKS (Rahil Jain)
4. @007jigar

Reserved
Bugs Known.
2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
-
- FM radio not available
- A-GPS does not work, GPS works though but slowish
Changelog CM11 0.19:
- sync with CM
- enable CWM to install from cmupdater
Changelog CM11 0.18
- sync with CM
- remove MTK audio policy and use default
- increase BT a2dp MTU (does it help?)
Changelog CM11 0.17
- sync with CM
- first attempt to make BT work: a2dp, car and file transfer seem to work
FAQ
This ROM is Still in Beta Stage so Install it at on your OWN RISK. If you find any Bugs other than above, Dont cry instead Report them so the dev can look at them.
1. To Enable MultiSim
Code:
su
setprop persist.radio.multisim.config dsds
2. To Disable MultiSim
Code:
su
setprop persist.radio.multisim.config none

RESERVED
Here I will Share Some awesome MODS or APPS or THEMES for this ROM in the Feature.
Hit Thanks if I helped.
[MOD][CM11]Real Xperia Z2 Lockscreen for Cyanogenmod 11 by NERO D
http://forum.xda-developers.com/can...-xperia-z2-lockscreen-cyanogenmod-11-t2884690
a lot of thanks to nero d

CM 4 ????
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really

satsmagic said:
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really
Click to expand...
Click to collapse
don't you see on top it's highlighted on the top ! 4.4.2

Thank You
Thank You, Yogesh...
I was trying to locate the recovery.img for the previous versions.
Regards and Wishes
Kannan

yogesh.kalyana said:
don't you see on top it's highlighted on the top ! 4.4.2
Click to expand...
Click to collapse
the post title says 4.4.4
also post title says CM11 and OP says CM4

yup sorry !
satsmagic said:
the post title says 4.4.4
also post title says CM11 and OP says CM4
Click to expand...
Click to collapse
my bad mistake , edited now!
thanks mate

yogesh.kalyana said:
my bad mistake , edited now!
thanks mate
Click to expand...
Click to collapse
you are welcome buddy, thanks for all the testing you do for the gr88 developers here

Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.

Status 7
Yogesh,
I get error Status-7
Regards
kannan

satsmagic said:
you are welcome buddy, thanks for all the testing you do for the gr88 developers here
Click to expand...
Click to collapse
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you

Use firfox!
chuppito said:
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you
Click to expand...
Click to collapse
it is working for me on all time
just use firefox on PC!

OK!
NeroD said:
Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.
Click to expand...
Click to collapse
1.4.4.4 edited
2.thread name : the original devis okay with that
3. and 4 th links updated
5.bugs : need your help for that to specify all the bugs
6.multisim posted
7.CREDITS GIVEN

yogesh.kalyana said:
it is working for me on all time
just use firefox on PC!
Click to expand...
Click to collapse
I have finally come to the download ... Thanks I test

Can you give screenshots..

Prometheus1408 said:
Can you give screenshots..
Click to expand...
Click to collapse
Screenshots Pls!!
Sent from my D6503

Ashok sha said:
Screenshots Pls!!
Sent from my D6503
Click to expand...
Click to collapse
Why dont you need screenshots for Cyanogenmod 11 they are same as any other cm11 rom. Google for it.

Finally the first kitkat 4.4.4 rom that instal without problems. For now, the only two bug I mentioned are those ...
thank you

[ROM][CAF][D802/D805][6.0] CyanogenMod 13.0 [UNOFFICIAL]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Changelog:
Code:
2015-11-17
- New sepolicy.
- Boringssl wrapper removed.
- Otg storage fixed.
2015-11-18
- Bring back boringssl wrapper to fix camera.
2015-11-21
- Device tree synced with cm repo.
- Sony thermanager removed.
2015-11-24
- Device tree synced with cm repo.
2015-11-25
- Device tree synced with cm repo.
- Facebook crash is gone.
- Kernel: Use interruptible waits to fix high load average
2015-11-26
- Sync with cm source
2015-11-28
- Camera fix
- r/w mount fix
Known Issues:
Bugs from CM12.1 (Random vibration, low speaker volume, etc...).
These are very-pre-experimental builds, issues may happen.
How to install:
Download ROM
Download GApps
Put the zip files on your SDCard
Reboot in Recovery
Wipe Data / Factory Reset
Select "Install zip from SDCard"
Choose the bootstack zip file
Choose CM13.0 zip file
Choose GApps zip file
Reboot system
DOWNLOAD ROM
DOWNLOAD GAPPS​
Facebook fix: delete or rename the libsslx.so from /data/app/com.facebook.katana-1/lib/arm and from /data/app/com.facebook.orca-1/lib/arm
Click to expand...
Click to collapse
Sources:
Device: https://github.com/victormlourenco/android_device_lge_g2-common/tree/cm-13.0
Kernel: https://github.com/victormlourenco/android_kernel_lge_msm8974/tree/cm-13.0-stock
XDA:DevDB Information
[ROM][CAF][D802/D805][6.0] CyanogenMod 13.0 [UNOFFICIAL], ROM for the LG G2
Contributors
Rick Roll
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-11-16
Last Updated 2015-11-25

Thanks.
Waiting for reviews. Can anyone tell if this ROM has the same sound skipping issues which happen on Lollipop?

Downloading

Does this rom support latest version of xposed?

sheikhramnuj said:
Does this rom support latest version of xposed?
Click to expand...
Click to collapse
yes

Thanks for these builds - please add the random vibration vibration bug to the known bugs list.

@Rick Roll, thanks for sharing such an early version of CM13 Tried it for less than hour, it looked quite solid and quick. Any bugs will be ironed out later, probably.
I only found out that changing dpi is quite hard, because we can't mount system as rw. However, it's possible in recovery. Layers won't work because of the same reason.

Hbohd said:
I only found out that changing dpi is quite hard, because we can't mount system as rw. However, it's possible in recovery...
Click to expand...
Click to collapse
sorry to bore you... but can you explain a bit more... I use to change system fonts plus other small things such as dpi, modded hosts file, etc... but as you know /system partition isn't re-mountable as RW
You suggest to do it from recovery, I tried but adb shell won't start from recovery... can you give me some hints? thank you :good:
driver issue perhaps? even if adb shell works regular (booted phone)
EDIT: never mind found solution... I had to install adb universal drivers (downloaded from here: http://adbdriver.com/downloads/)
thank you anyway

Many days ago i was on stock lolipop 5.0.2, rooting in that time and used Autorec v2 to flash TWRP recovery.
Question is - this ROM will boot on my autorec TWRP recovery 2.8.6.1?
I'm now on CM 12.1 Official

Radac Stunghthumz said:
Many days ago i was on stock lolipop 5.0.2, rooting in that time and used Autorec v2 to flash TWRP recovery.
Question is - this ROM will boot on my autorec TWRP recovery 2.8.6.1?
I'm now on CM 12.1 Official
Click to expand...
Click to collapse
I've your same recovery, no problem here
just be sure to remove after flash and before reboot (within the recovery I mean) the apk under /system/app/qualcomm folder (use file manager included in recovery under "advanced")
for gapps you should use opengapps (opengapps.org), choose 6.0 and I suggest to start with a smaller package (I tried micro & nano and both worked)
good luck!

Any chance for d800?
Sent from my LG-D800 using Tapatalk

suiller said:
I've your same recovery, no problem here
just be sure to remove after flash and before reboot (within the recovery I mean) the apk under /system/app/qualcomm folder (use file manager included in recovery under "advanced")
for gapps you should use opengapps (opengapps.org), choose 6.0 and I suggest to start with a smaller package (I tried micro & nano and both worked)
good luck!
Click to expand...
Click to collapse
I haven't removed this apk and it still booted fine bro!

Good rom
But not very stable

For now it all seems to be ok, the ROM is stable, no random reboots, no lags, everything works (Facebook from Play Store works), the only two bugs I found are the editing of the navigation ring targets, and the low quality of microphone recordings in WhatsApp (I don't know if it's only in WhatsApp or in calls too).
I'm using the build of 16/11.
EDIT: Camera is not working, neither AOSP Camera nor Google Camera, I'll try Lenovo Camera or the new build of 17/11.

I try to flash cm13 zip files for 4 times with old twrp, 1 times with latest twrp. But there is no changes. Everytime I have try to flash cm13, It giving error "Failed" with "Invalid checksum for partition /dev/block/platform/msm_sdcc.1/by-name/aboot" "E: error executing updater binary in zip '/sdcard/cm-13.*-20151117-UNOFFICIAL-d802.zip'" "Error flashing zip 'sdcard/cm-13.0-20151117-UNOFFICIAL-d802.zip" "Updating partition details..." "...done" And failed.
How can I fix it?

Markster93 said:
EDIT: Camera is not working, neither AOSP Camera nor Google Camera, I'll try Lenovo Camera or the new build of 17/11.
Click to expand...
Click to collapse
apart some FC on close... snap camera (on playstore) works very well
---------- Post added at 05:54 PM ---------- Previous post was at 05:50 PM ----------
Heroata said:
I try to flash cm13 zip files for 4 times with old twrp, 1 times with latest twrp. But there is no changes. Everytime I have try to flash cm13, It giving error "Failed" with "Invalid checksum for partition /dev/block/platform/msm_sdcc.1/by-name/aboot" "E: error executing updater binary in zip '/sdcard/cm-13.*-20151117-UNOFFICIAL-d802.zip'" "Error flashing zip 'sdcard/cm-13.0-20151117-UNOFFICIAL-d802.zip" "Updating partition details..." "...done" And failed.
How can I fix it?
Click to expand...
Click to collapse
if you have 802 model you should 1st flash this:
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d802

suiller said:
apart some FC on close... snap camera (on playstore) works very well
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d802
Click to expand...
Click to collapse
Are you using the 16/11 build or the 17/11 build?
EDIT: Anzi, visto che sei italiano, stai usando la build del 16 novembre o quella di oggi?

Markster93 said:
Are you using the 16/11 build or the 17/11 build?
Click to expand...
Click to collapse
I live in italy but I'm not italian
anyway 16th nov
you have to flash an hybrid-caf bootloader, I had a similar issue... didn't remember exactly the error but I think was that
If you have a D802 model the one I posted is the correct one

suiller said:
apart some FC on close... snap camera (on playstore) works very well
---------- Post added at 05:54 PM ---------- Previous post was at 05:50 PM ----------
if you have 802 model you should 1st flash this:
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d802
Click to expand...
Click to collapse
I did already.

suiller said:
I live in italy but I'm not italian
anyway 16th nov
you have to flash an hybrid-caf bootloader, I had a similar issue... didn't remember exactly the error but I think was that
If you have a D802 model the one I posted is the correct one
Click to expand...
Click to collapse
It still doesn't work

[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
NOTE: This is a cooked ROM based on Compiled from Source by Bule.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------​
This project no longer updated because I sold this device. Thanks for following my projects :good:​
-----------------------------------------------------------------------------------------------------------------​Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Features
It's a standard CyanogenMod 12.1 Bule build 20160102 porting plus this:
Deleted China app
Default system theme
Added Xperia keybord (deleted china keyboard)
Europe timezone
Fixed host for normal contacts synchronization
en local
Root explorer in data/app (can delete from home app)
.
Click to expand...
Click to collapse
Installation instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP if need.
Factory Reset via TWRP.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM installation.
Click to expand...
Click to collapse
Update instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP for security.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM update.
Click to expand...
Click to collapse
Xposed installation
For Xposed installation follow this thread and install the arm64-sdk22 version.
Click to expand...
Click to collapse
Know bugs
Notifications LED: working fine with some colors, red | green | cyano | pink | orange | white but the cm color selection go crazy sometimes, we working to fix this, but the notifications now working fine.
Engineering mode not working (in this moment into no one CM working).
FM Radio module not working.
Sim 2 not working (need testing).
Click to expand...
Click to collapse
Change log
Code:
Build 1 - 2016/01/06
[new] First release.
Click to expand...
Click to collapse
Downloads
External Download (sorry but I can't upload every build): The author abandoned for a moment for instability issue, when this rom come back again, I repost here too.
Click to expand...
Click to collapse
Important notes
This ROM is based on Bule Version with plus features get from other CyanogenMod available for our device. The most important in this ROM is stability with velocity. If you wanna try this ROM remember this is a testing ROM and all times we working for give the best experience with this ROM and device. If you have a problem you can write here or into the official site (I suggest to talking here because into XDA we have the best developers in the android ecosystem).
Click to expand...
Click to collapse
XDA:DevDB Information
[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack, ROM for the Redmi Note 2
Contributors
Namaless, vova_vafin, bule
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-01-06
Last Updated 2016-02-01

Reserved

You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?

DJ-Tumor said:
You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?
Click to expand...
Click to collapse
First for all thanks to post your idea with rude method.
Next you know some ppl can use some roms?
Third you can ignore the rom/thread and use what you want, example I used Miui stable but I testing all roms when come out for funny and for help other ppl.
What you think resolve with your post? Nothing...
Sorry if you think I'm rude, but I reply with the same method you post here...

The owner of the rom have removed from public access, I talking with him if want repost or I request deleting to this thread. Sorry for inconvenience.

[ROM][PORT][TEST]CM13 Xperia M5

Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
Beta 1 [COLOR="Red"]NO KERNEL SOURCE =[/COLOR]
Beta 2 [COLOR="Red"]NO ES BUENO :([/COLOR]
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @ByBlaCk @krkshalill @TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta

How nice is that. Finally some custom roms are avaiable for m5.

jonathangrag said:
How nice is that. Finally some custom roms are avaiable for m5.
Click to expand...
Click to collapse
thanks.
my team port xperia m5 custom roms but need tester and tell me bugs.ıf some people test and report bug ı port new roms(eg.flyme cm14) xperia m5 and ı fix bugs.

Thread moved to Android Development. I would like to see kernel source very soon.
thx

Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
this rom beta and some devices was boot loop.My team cant fix that and not update.If you like cm13 and you port it like devices(e.g elephone wowney lite,infinix zero 3,redmi note 2,redmi note 3(Mediatek),or any mt67xx eg.jıayu s3,jıayu s3 plus,....)

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.

TRXteam said:
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.
Click to expand...
Click to collapse
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?

TRXteam said:
Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
https://mega.nz/#!Fg1AQCyA!SlGKtLdQmLJbFw8JHeulDa4b4KznRRkkYtusK1Ea0K0
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @[email protected]@TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta
Click to expand...
Click to collapse
will this rom pass safetynet api test?

Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!

ataraxist said:
will this rom pass safetynet api test?
Click to expand...
Click to collapse
ı dont known,you test and look it.:good:

pickmod said:
Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!
Click to expand...
Click to collapse
not support hollyds,this rom compatible with hollyss(eg.E5603)

グリッチ said:
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?
Click to expand...
Click to collapse
グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
rom update beta2 and need tester.

TRXteam said:
rom update beta2 and need tester.
Click to expand...
Click to collapse
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.

spark1991z said:
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.
Click to expand...
Click to collapse
thanks your reply,My team goes to holiday and ı am alone but ı work it.

I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
okay thanks your help.:good:

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
I dont understand... Sony opened sources for our device - why are you need sources for other device??!

Thread closed as there is no kernel source available. I have warned the OP a few days ago - without any success apparently
Here's a nice lecture about being a good developer. Rules are made to follow them and I fully expect it from you.
Regards,
Tom

[ABANDONED][RECOVERY][UNOFFICIAL][SOURCE-BUILT][WIP] TWRP for Huawei Honor 3C

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial TWRP 3.x build for the Huawei Honor 3C (h30u10/H30-U10)
This project is abandoned! I'll reopen the thread if I have any progress in the future... If you want anything from me you can contact me in my email address, in Telegram (@iamnotstanley) or in private message.
Only use this binary with your own responsibility, and please read the "known issues" list.
Working:
Everything, except the things in the "known issues" list.
TWRP functional checklist, but in this list not everything applies for our device
Known issues:
flash/restore image (boot&recovery) (installing with a zip [if you're using codelover's fixed update-binary] and backup working correctly) **need help **
Download:
Latest and older versions: See the DevDB Downloads page or click here. (Mirror)
Install:
You can install this recovery in 4 way:
Using an another version of TWRP: install the downloaded zip
Using an another version of TWRP: extract the zip and flash the image
Using SP Flash Tools: extract the zip and flash the image
Using Flashify or other flashing app: extract the zip and flash the image
Revert easily to codelover's TWRP:
Download from here the UPDATE-TWRP-2.8.6.0_H30-U10.zip or the UPDATE-TWRP-2.8.6.0_V2_H30-U10_EU.zip and install it inside the TWRP, after that if you reboot to recovery, you will see the old version.
Changelog:
TWRP changelog: here
Device changelog:
3.1.1-0:
Updated to the latest version.
We still have the the "image flash" problem!
3.1.0-0:
First release for Huawei Honor 3C (h30u10)
Built with omnirom android-5.1 tree
Prebuilt kernel: EU B306 (3.4.67)
Screenshots: See the DevDB Screenshots page or click here.
Credits:
iamnotstanley
codelover
carliv for his bootimg module
MSF-Jarvis for his initial device tree
TeamWin team
omnirom team
XDA:DevDB Information
TWRP for Huawei Honor 3C, Device Specific App for the Honor 3C
Contributors
iamnotstanley, codelover, carliv, MSF-Jarvis, TeamWin team & omnirom team
Source Code: https://github.com/iamnotstanley/android_device_huawei_h30u10/tree/android-5.1
Version Information
Status: Abandoned
Current Beta Version: 3.1.1-0
Beta Release Date: 2017-05-13
Created 2017-04-01
Last Updated 2018-01-29

Reserved

Nice woork bro
why did not you patch it bro for img files flashing??
Can you Send Me sources

hassanjavaid8181 said:
Nice woork bro
why did not you patch it bro for img files flashing??
Can you Send Me sources
Click to expand...
Click to collapse
Thanks.
I'm working on the image flashing fix, but I'm building from source code and nearly scratch, and now I finding the cause of the problem. I'll fix it as soon as I can.
My source code (TWRP device tree) is in the post: https://github.com/iamnotstanley/android_device_huawei_h30u10

iamnotstanley said:
Thanks.
I'm working on the image flashing fix, but I'm building from source code and nearly scratch, and now I finding the cause of the problem. I'll fix it as soon as I can.
My source code (TWRP device tree) is in the post: https://github.com/iamnotstanley/android_device_huawei_h30u10
Click to expand...
Click to collapse
really appreciate your efforts:good:
good luck

Bro can we flash magisk by this version.

mnumaher said:
Bro can we flash magisk by this version.
Click to expand...
Click to collapse
If Magisk doesn't work in the older or other recoveries, it won't work in this recovery.
I think, because Magisk modify the boot image and MT6582 phones has a boot image with a special MTK header, and I think Magisk currently doesn't support this format. (Like the "new" systemless SuperSU.)

Thanks bro bringing twrp 3x to our device!!
I'm hoping you keep maintain this project as well till reach bugless

iamnotstanley said:
If Magisk doesn't work in the older or other recoveries, it won't work in this recovery.
I think, because Magisk modify the boot image and MT6582 phones has a boot image with a special MTK header, and I think Magisk currently doesn't support this format. (Like the "new" systemless SuperSU.)
Click to expand...
Click to collapse
Thanks.
Is touch working correctly in this version?

mnumaher said:
Thanks.
Is touch working correctly in this version?
Click to expand...
Click to collapse
For me, yes. This version has B306 kernel. If your phone's touch is working on B306, it'll work, but it's not, you will need to change kernel. You can try this first, but if isn't working, tell me which kernel has working touch for your phone and I'll make a version for that.
Kernels: https://forum.xda-developers.com/showpost.php?p=60721740&postcount=861
Rayquaza said:
Thanks bro bringing twrp 3x to our device!!
I'm hoping you keep maintain this project as well till reach bugless
Click to expand...
Click to collapse
Thanks for your support. I'll maintain this project while I have this phone. I'm trying to fix the img flash issue, but I think I need help with it.

iamnotstanley said:
For me, yes. This version has B306 kernel. If your phone's touch is working on B306, it'll work, but it's not, you will need to change kernel. You can try this first, but if isn't working, tell me which kernel has working touch for your phone and I'll make a version for that.
Kernels: https://forum.xda-developers.com/showpost.php?p=60721740&postcount=861
Thanks for your support. I'll maintain this project while I have this phone. I'm trying to fix the img flash issue, but I think I need help with it.
Click to expand...
Click to collapse
Ty bro it's working absolutely fine.
When we will be able to flash img.

mnumaher said:
Ty bro it's working absolutely fine.
When we will be able to flash img.
Click to expand...
Click to collapse
I'm working on it, but I think I need help to fix that. I hope maybe somebody can help me.

working fine cheers!

iamnotstanley said:
I'm working on it, but I think I need help to fix that. I hope maybe somebody can help me.
Click to expand...
Click to collapse
hi and great work, thanks for that
codelover maybe have a patch for that, past time he say i forget it, but can help you to know how solve that

Hi @iamnotstanley, to answer your question:
If i recall correctly i did explained about the problem in my thread earlier - the problem lies on 3C KK kernels. (MTK variant only)
H30-U10 stock KK kernels do not permit writing to the boot partition (/dev/bootimg) directly, the partition is mounted as read only.
Interestingly, there are some ported recoveries out there that doesn't work, and user doesn't even know about it. (eg: ROM appeared to be flashed successfuly but failed to boot because boot.img didn't get through, missing assert() to stop)
If you find a working H30-U10 recovery that can write to boot for 3C, it's likely using JB kernel or KK kernel from other 6582 compatible KK kernel, not sure if someone has compiled a fully working 3C kernel.
With JB kernel, you will be missing SELinux & some other features, while KK kernel from other device is dangerous IMHO, unless you are 100% sure it's compatible, sometimes i wonder whether those permanently bricked 3C with partition error were using these 'patched' recoveries...
My TWRP 2.8.6.0 has been customized to deal with this, i wrote a few C custom functions for twrp, it works like this;
1) read the partition table while flashing, loop through until you find the details for target partition that you need to write.
2) calculate the size and offset to write (you will need to convert the hex to int, then some math again to get the bs, skip, etc value for dd)
3) use 'dd' to write directly to mmcblock0, instead of C fwrite to the specific built-in partition mount point, eg: /dev/bootimg
Wish i could help more, unfortunately i don't have 3C data with me anymore (hdd crashed), and my work is killing me.
Good luck with that!

codelover said:
Hi @iamnotstanley, to answer your question:
...
Click to expand...
Click to collapse
Hi!
Thanks for your answer, I really appreciate your help.
So the problem is mainly in the kernel. I don't think I can fix this, but I'll try after my exams.

TWRP updated to 3.1.1-0
Hello guys!
I updated the TWRP to 3.1.1-0 yesterday. Unfortunately it still have the image flash issue. If you're interested you can download from the DevDB Downloads page or the Github mirror.

Huawei Honor 3C H30-U10
Hello guys
I m new on this site and want to know about my huawei honor 3c h30-u10
I want to root and install TWRP custom recovery in my cell without PC. .
I am using EMUI 3 and android ver 4.4.2 whereas build number is B310
Please any one give me detail with images.
Thanx in advance

SHBhatti said:
Hello guys
I m new on this site and want to know about my huawei honor 3c h30-u10
I want to root and install TWRP custom recovery in my cell without PC. .
I am using EMUI 3 and android ver 4.4.2 whereas build number is B310
Please any one give me detail with images.
Thanx in advance
Click to expand...
Click to collapse
Try rooting with root applications such as Baidu root and etc.

TamaziAce said:
Try rooting with root applications such as Baidu root and etc.
Click to expand...
Click to collapse
I was Try to root with king root, king root said that your device is rooted successfully but root checker said no root???? what should i do now..?