LGSmartCover and Mirrorlink stopped working after LMY47D update via Lg Bridge on a rooted device which had twrp before updating. I had updated via lg bridge before without any problems. I've seen some people with the same problem in this tread http://forum.xda-developers.com/g4/general/lg-g4-h815-internacional-v10c-firmware-t3172621/post62228220#post62228220
but no solution it seems. I tried clearing the data of these apps but it didn't work. any body managed to solve it?
Had to restore but problem is solved now
jan-sgs said:
LGSmartCover and Mirrorlink stopped working after LMY47D update via Lg Bridge on a rooted device which had twrp before updating. I had updated via lg bridge before without any problems. I've seen some people with the same problem in this tread http://forum.xda-developers.com/g4/general/lg-g4-h815-internacional-v10c-firmware-t3172621/post62228220#post62228220
but no solution it seems. I tried clearing the data of these apps but it didn't work. any body managed to solve it?
Click to expand...
Click to collapse
Hi to everybody
i write from French
i have lg g4 H815 ( europe model)
and the same problem with mirrorlink and apps quick circle
after the upgrade sw to v10C with lg bridge with windows 10
i tried everything, hard reset, factory reset
normal flash with lg flash tool to versio v10b
but nothing, the problem remains
bad problem 'cause everytime i start my g4 i see two times the message:
"mirrorlink stop working"
so 10 minutes to find gps for google maps
and everytime around ten icons disappears from the screen
for now, i can't make work lg support tool for an CSE flash
to go back to version v10b
lg support tool stop working after install drivers and connect my g4
i see @jan-sgs have solved the problem
You or somebody can tell me how to solve this bad problem?
sorry for the long post, just want to be precise
many thanks
Hi-)
Hi and sorry for 2 consecutive posts
Well this mirrorlink problem is very bad
Somebody have some solutions please?
My g4 h815 works bad with this problem
I see is out 2 new firmware version for g4, v10E and v10g
Only for saudi Arabia (Erirati arabi)
It' compatible with europe g4 version?
Hello same problem with mirrorlink since the v10d update for h815 international yesterday ?
Solved, go back to v10b
jellysteve said:
Hello same problem with mirrorlink since the v10d update for h815 international yesterday ��
Click to expand...
Click to collapse
Hello
I've problem with login, don't know why
No way to login, sorry for 2 registrations
I'm Ken7stars
@jellysteve
I've solved my mirrorlink problem like this
I have G4 europe H815, brand vodafone
Search in this site kdz vodafon file
There's very few files kdz vodafone, not found for italy
I find in this link posted by a great guy here
Don't know if i can post the link, i have few posts
I can't, anyway, it's the list of kdz files here on the 3d "go back to stock G4"
I've download "portugal vodafone v10b"
It'real 10b, not 10c as some called 10b
Normal flash with lg support tool
And the vodafone 10b was in my g4
Automatically i find OTA update for v10c, 330mb
After the update with ota
The problem mirror link it's solved
So, you have mirror link problem after kdz file v10d?
Or problem after OTA update v10d?
Hope i can help-)
Hi-)
Hello the mirrorlink issue is since OTA update
I found a kdz on the lg phone firmware website but the link for download doesn't work any idea ?
http://pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=FWB404P1321JAW64108DNML/H81510D_00.kdz
Thanks
jellysteve said:
Hello the mirrorlink issue is since OTA update
I found a kdz on the lg phone firmware website but the link for download doesn't work any idea ?
Thanks
Click to expand...
Click to collapse
Hello
The link doesn't work even for me
So mirrorlink on g4 it's not easy to solve
You have international g4, so model H815?
I can't post links for now
I can't say this is the solution for you
But i solved mirrorlink in this way
Go here in the Forum at the section for G4:
G4 General- [Guide] LG G4 Stock Firmware (Go Back to Stock) KDZ & TOT Method by hyelton
In the middle of the post there's:" KDZ Firmware Files; HERE"
Click HERE
A link will open with some kdz files for G4
Download kdz before v10d
Important, your g4 is brand or no brand?
You have choose the right kdz for your G4
If you have H815 europe, try d.load these kdz file:
Europe General H81510B_00.kdz 1697378KB Jul 06 2015 04:43:29 PM
Or kdz files of your provider, if there's in list
As most of v10b kdz, it's not v10b, but v10c
Good for you 'cause you have v10d
Run lg flash tool 2014
Put kdz file
Select CSE flash
Leave all the others fields as they are
If Cse flash don't work, do normal flash
At the restart, you'll find v10c
And 99% find the Ota update for v10d
Before the Ota update do a hard reset
At the restart, run the Ota update v10d
And see if mirrorlink works
If not, with lg bridge run "fix update error"
Don't do with lg bridge the software update, this will put mirrorlink error
If you have windows 10, maybe Cse flash will not work
No prob, normal flash work back to v10b-c
Hope will work
Sorry for the long post-)
Yes I comfirm my g4 is h815 unbrand.
I found the kdz v10d for France it's my actual version.
I'm ok with the process : lg flash tool.. question if I use normal flash it's necessary to make hard reset or not.
Thanks for your help and time ?
Envoyé de mon LG-H815 en utilisant Tapatalk
jellysteve said:
Yes I comfirm my g4 is h815 unbrand.
I found the kdz v10d for France it's my actual version.
I'm ok with the process : lg flash tool.. question if I use normal flash it's necessary to make hard reset or not.
Thanks for your help and time
Envoyé de mon LG-H815 en utilisant Tapatalk
Click to expand...
Click to collapse
The point is to go in downgrade, v10b or C
If you keep kdz file v10d, i think the problem remains
Your G4 is no brand, so in the link if kdz files try d.load the file kdz i've posted above
With flash tool try normal flash
So you have v10c, then accept the Ota v10d
And see if mirrorlink is solved
If not, do hard reset
Then with Lg bridge do fix errors update
I'm italian but i live in France like You
In this time is almost impossible download flash tool and drivers
Many french sites in these days have put in web around 50 virus
Keep update-)
Hello
I found V10C and I downgrade my g4 with flashtool and I make the update with lg bridge and same problem with mirrorlink
I make a hard reset and same problem I don't understand
I think i wait a new update for solve perhaps the problem.
Evaluate the problem
jellysteve said:
Hello
I found V10C and I downgrade my g4 with flashtool and I make the update with lg bridge and same problem with mirrorlink
I make a hard reset and same problem I don't understand
I think i wait a new update for solve perhaps the problem.
Click to expand...
Click to collapse
Well mirrorlink is hard to solve
I've done the steps to solve m.link by my idea
Can't found nothing on web
I don't know if you have patience to make again all the steps
You said you update with Lg bridge after downgrade v10c
Only my opinion, this is the mistake while I'd m.link problem
I said in my previous post:"don't do with lg bridge the software update, this will put mirrorlink error"
If you want to retry
Downgrade v10c, wirh cse flash, then wait the OTA update, not update with lg bridge
The best way is downgrade v10b, like i did for vodafone
But v10b no brand kdz is hard to find
It depends what problems create m.link at your g4
If it's only the message at start, it's not bad problem
In my case, many icons of app on screen disappears
I hope is not your case
Just value the problem, only a message, it's not so bad
As you said, with a new update the problem should be solved
Hi-)
It's my guess, but i think mirrorlink problem will persist for those, who has unlocked bootloader and ignored LG warning that some apps, based on DRM will stop working
nixuspix said:
It's my guess, but i think mirrorlink problem will persist for those, who has unlocked bootloader and ignored LG warning that some apps, based on DRM will stop working
Click to expand...
Click to collapse
I totally agree
I'd unlocked my vodafone bootloader
And so here mirrorlink problem
It's strange that i've solved with downgrade and Ota update, but not @jellysteve case
Mirrorlink is useful if you have a modern car that fit with
If like me, i have a modern car not compatible
The error message m.link can be ignored
I must fix 'cause many icons of apps disappeared at start
But it seems icons problem, happened only for my G4!
Then, with windows 10 i can't do cse flash
So i go back to Win 7, and cse flash works
Hi-)
I started to face this problem, but my H815 fully stock, no unlocking, no rooting. And I wish it to stay that way for now... So the only solution for me is wait for LG to fix that?
Weird thing, I uninstalled quick circle apps, quick remote and quickify, and the problem seems to be gone
maslelviz said:
Weird thing, I uninstalled quick circle apps, quick remote and quickify, and the problem seems to be gone
Click to expand...
Click to collapse
Is your bootloader unlocked and are you rooted?
nixuspix said:
Is your bootloader unlocked and are you rooted?
Click to expand...
Click to collapse
no, I'm not rooted, bootloader locked. I started having this issue when I started experimenting with various apps for quick circle case.
Hello, maybe my solution will help for you too. Ive got h815, locked bootloader with low effort root.
Ive installed super manager app with root permissions. In the app go for the system folder, when you trying to enter switch system folder to r/w (the app automaticly asks it). Go to the priv-app search LgCover folder and rename the app inside of it with .bak extension. Reboot the phone.
After that repeat the process but you should remove .bak from the end of the app's name (back to the original) and reboot again. Mine started to work without any issues. I guess that will work with the mirrorlink app. Location of the app: system/app/MirrorLinkServer folder. You should do the same thing with it
Good luck
Guys i have a german lgh815 unbranded device and i received the standart android 6.0 v20a update for german devices 2 months ago and last week i decided to go back to lollipop and after going back i didnt get the message to update the phone to 6.0 again over lg brigde. Did i sth wrong? and since the downgrade over lg up i have a a data which cannot be opened on the computer on my phone called inmedia_db_complete (0bytes) does sb know what this is and can i delete it safely i hard resettet phone 2 times after downgrade too...
am i now stuck on v10d ???
If you want to go to 6.0 just use LGUP. My phone should be running 10D according to OTA but it is infact 20D. My point is f*ck OTA because it just does't do it's job.
Sent from my LG-H815 using Tapatalk
There is good information on this forum on how to root your k428 (https://forum.xda-developers.com/lg-k10/development/root-twrp-rom-t-mobile-k428-k10-t3582493)
This however, is not possible on anything later than the 10f(?) firmware, due to there being a December 15, 2016 security update.
Firmwares I am pulling from: https://lg-firmwares.com/lg-k428sg-firmwares/
My K10 is on the most recent update 20h(?), the only thing I've done is unlock the bootloader. I'm trying to get it down to an earlier firmware version to be able to root. I have tried:
Uppercut with LGUP:
There are two separate errors I get with this. One is when I select refurbish and it gets to about 4% (On LGUP, not the phone) and it says my ".kdz does not allow refurbishing" or something along those lines.
I have tried update as well, and I get an error at 14%(on LGUP, 10% on device) and I get "invalid command response code" (image attached)
I have tried both of these options with 3 different .kdz files, so the problems aren't just unique to one file.
LG Flash Tool 2014:
When I start there is an error saying no connection to the server and no progress indicated on the phone or computer, even after maybe 1/2 hour.
After LGUP, I do have to bring my phone back with LG Bridge Update Error Recovery, but interestingly no data is lost at all so clearly my phone is not being wiped at all.
How have people successfully downgraded their k428 and how do I?
Also, is the k428 the same as the k428sg? I can't seem to figure this out and the firmwares website has slightly different specs.
I have another phone, just really hoping to switch to this one is it seems quicker, isn't running Touchwiz, has a decent camera, more storage... I won't be switching if I can't get this rooted because I have been spoiled by rooted devices.
der_cobester said:
There are two separate errors I get with this. One is when I select refurbish and it gets to about 4% (On LGUP, not the phone) and it says my ".kdz does not allow refurbishing" or something along those lines.
I have tried update as well, and I get an error at 14%(on LGUP, 10% on device) and I get "invalid command response code" (image attached)
I have tried both of these options with 3 different .kdz files, so the problems aren't just unique to one file.
[...]
After LGUP, I do have to bring my phone back with LG Bridge Update Error Recovery, but interestingly no data is lost at all so clearly my phone is not being wiped at all.
[...]
Also, is the k428 the same as the k428sg? I can't seem to figure this out and the firmwares website has slightly different specs.
I have another phone, just really hoping to switch to this one is it seems quicker, isn't running Touchwiz, has a decent camera, more storage... I won't be switching if I can't get this rooted because I have been spoiled by rooted devices.
Click to expand...
Click to collapse
Having very similar issues, at the moment stuck in a "Firmware update" loop with a T-Mobile K10 K428, after trying to downgrade from 7.0 to 6.0.1.
How are you reverting it to useable form with the LG Bridge app?
It only tells me I have the latest update then goes away.
[nevermind, this part worked]
Managed to bring the device back to functional 7.0 state, but have found no way to downgrade back to 6.0.1.. the regret I feel for allowing the update to happen before rooting the device is indescribable in frikkin words.
Hopefully someone somewhere is working on the root of this computer in Android 7.0, I have 3 of these and I need to do the root to unlock them
last Friday I could downgrade a version 10R to 10G and rooted .
but since yesterday I'm with another to downgrade but am getting error while modem part flashing .
version was 20H , I noticed once upon 20 no possible to back In 10 .
psytr0nic said:
last Friday I could downgrade a version 10R to 10G and rooted .
but since yesterday I'm with another to downgrade but am getting error while modem part flashing .
version was 20H , I noticed once upon 20 no possible to back In 10 .
Click to expand...
Click to collapse
i have been trying to make nougat downgrade to marshmallow for months. still no results. most i get is phone simply not booting OS.
SO,there is no way to downgrade from 20g?
what about about using special tools like Octoplus Box andZ3X Box?
anyone tried?
---------- Post added at 07:54 PM ---------- Previous post was at 07:53 PM ----------
SO,there is no way to downgrade from 20g?
what about about using special tools like Octoplus Box andZ3X Box?
anyone tried?
Worked Fine, min was a K428 with build number MMB29M, sec patch 2016-08-01
I did it as its posted step by step.
Nice Job!
Hi folks. I have a US991 with 5.1 lollipop that is a replacement LG sent me. I need the 6.0 MM update. I have tried LG Bridge, but it's not recognizing the USB Connection to the PC. I have tried everything besides rooting the phone (am not comfortable doing that). I called/chatted online/and even emailed Tech support for AT&T and LG almost 10 times now, but they are simply not helping me at all. They keep saying I need to wait for available update or they tell me the other party has to resolve it. When I got to check for software update under settings it keeps saying I am up to date. What can I do at this point because I need the update. Thanks for any suggestions.
Extremedriver said:
Hi folks. I have a US991 with 5.1 lollipop that is a replacement LG sent me. I need the 6.0 MM update. I have tried LG Bridge, but it's not recognizing the USB Connection to the PC. I have tried everything besides rooting the phone (am not comfortable doing that). I called/chatted online/and even emailed Tech support for AT&T and LG almost 10 times now, but they are simply not helping me at all. They keep saying I need to wait for available update or they tell me the other party has to resolve it. When I got to check for software update under settings it keeps saying I am up to date. What can I do at this point because I need the update. Thanks for any suggestions.
Click to expand...
Click to collapse
Its a Driver issue on your PC, its not correct installed yet. My idea : have you dissabled the Automatic update in Windows 7, 8, 10 ? If this happend you must enable it again but can set from automatic to Manual and install the Divers or LG Bridge again. Happend so on my Sytem too.
Thanks for reply. I finally got mobile support tool to work on a friends laptop but when I ran it it shows my software is up to date just like it does in the update center of settings. Why would it not show me any updates at all knowing that my other G4 has MM on it?? Any suggestions. Thanks.
Hello, I'm new to this device and I'm just having troubles with it. I bought a branded LG G7 ThinQ and then, back home, I decided to flash stock firmware (no brand apps and so on); no troubles: it works perfectly. The Firmware I flashed was update to May security patch. Later, I found out that a new versione was released and I tried to update via OTA. No updates found. Then, I download LG Bridge on my PC and searched for updates. It found an update and I confirmed the flash, but unfortunately, the update process stops after downloaded the firmware and sideloaded to the device. LG Bridge now gives me an error saying that it can't be updated. What's the problem for you? My system version is V10b-222-01 and the build is OPR1.170623.032. I forgot to say I've already tried to flash the firmware downloaded through LG Bridge with LG UP with no results.
TheSura said:
Hello, I'm new to this device and I'm just having troubles with it. I bought a branded LG G7 ThinQ and then, back home, I decided to flash stock firmware (no brand apps and so on); no troubles: it works perfectly. The Firmware I flashed was update to May security patch. Later, I found out that a new versione was released and I tried to update via OTA. No updates found. Then, I download LG Bridge on my PC and searched for updates. It found an update and I confirmed the flash, but unfortunately, the update process stops after downloaded the firmware and sideloaded to the device. LG Bridge now gives me an error saying that it can't be updated. What's the problem for you? My system version is V10b-222-01 and the build is OPR1.170623.032. I forgot to say I've already tried to flash the firmware downloaded through LG Bridge with LG UP with no results.
Click to expand...
Click to collapse
It's completely normal that you can no longer receive updates ota by changing firmware. It's the reason I decided to keep the tim branded firmware on my thinq. As for the lg bridge update, maybe it notices a discrepancy between your build number and/or fingerprint and your system version and so blocks the installation. I'm mostly guessing here, I'm not an expert. You might try going back to your branded firmware and see what happens.
I have the same problem, LG G7 thinq SW Version V10b 222 01. It's the original version, I didn't flash any other firmware.