HTC One M8 - ARHD 45.0 firmware 4.16.401.13 (WWE) - One (M8) Q&A, Help & Troubleshooting

Hello everyone!
I want to install ARHD 45.0 but after installation Wifi dosent work.
I think i have wrong firmware, but when i want to change it i have Error code 99.
My bootloader have S-On and i can't change it to S-OFF, is there any step by step instruction to change it?

Piszu said:
Hello everyone!
I want to install ARHD 45.0 but after installation Wifi dosent work.
I think i have wrong firmware, but when i want to change it i have Error code 99.
My bootloader have S-On and i can't change it to S-OFF, is there any step by step instruction to change it?
Click to expand...
Click to collapse
You need to use sunshine ($25 US) to get s-off: http://theroot.ninja/
Although, you may still be able to flash the firmware if its signed and matches your CID. Where did you get the firmware from, and what is your device's CID?
Alternately with s-on, you can return to stock ROM (for your CID and present firmware number), and corresponding stock recovery. Then OTA to update the firmware: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860

redpoint73 said:
You need to use sunshine ($25 US) to get s-off: http://theroot.ninja/
Although, you may still be able to flash the firmware if its signed and matches your CID. Where did you get the firmware from, and what is your device's CID?
Alternately with s-on, you can return to stock ROM (for your CID and present firmware number), and corresponding stock recovery. Then OTA to update the firmware: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Click to expand...
Click to collapse
Hi,
Thanks for advice, but I think i stock.
If I ried to install some newest ROM I have problem with my Wifi - it dosen't works..
Bootloader configuration:
M8_UL PVT SHIP S-ON
HBOOT: 3.19.0.0000
RADIO: 1.22.21331147A1.29G
CID: HTC__032
OS: 3.28.401.9
I tried to do everything like this thead:
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I tried to:
CID HTC__001, HTC__J15, HTC__E11, HTC__203, HTC__102, HTC__405, HTC__Y13, HTC__A07, HTC__304, HTC__032, HTC__016, HTC__M27, HTC__K18, HTC__002, HTC__A48
MID 0P6B10000
3.28.401.6 - does't exists
3.28.401.9 - does't exists
4.16.401.10 - not this one
4.16.401.13 - this one
and
4.16.401.13_recovery
Every time I hae this:
I:\Flash_recovery_3.28.401.7\fastboot\adb>fastboot flash zip hb.zip
target reported max download size of 1826418688 bytes
sending 'zip' (495 KB)...
OKAY [ 0.220s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 0.521s
I:\Flash_recovery_3.28.401.7\fastboot\adb>fastboot flash zip 4.16.401.10.zip
target reported max download size of 1825906688 bytes
sending 'zip' (52100 KB)...
OKAY [ 2.693s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.995s
Now when i go to recovery and try "apply from sd card" I have error:
"find no match partition for package path sdcard/ptt.zip.."
When I go back to TWRP I can install ROM and its work.
Last running configuration is ARDH v. 11.
Anyone help?

Piszu said:
Hi,
Bootloader configuration:
M8_UL PVT SHIP S-ON
HBOOT: 3.19.0.0000
RADIO: 1.22.21331147A1.29G
CID: HTC__032
OS: 3.28.401.9
3.28.401.6 - does't exists
3.28.401.9 - does't exists
4.16.401.10 - not this one
4.16.401.13 - this one
and
4.16.401.13_recovery
Click to expand...
Click to collapse
Since OS version 3.28.401.9 is listed on your bootloader screen (this is your current firmware version number), you want to restore the same stock nandroid and recovery in order to OTA and update your firmware. You can't just pick any one, it has to be 3.28.401.9
The author of that thread (ckpv5) is pretty responsive about re-uploading dead links. Ask him nicely in that thread to re-upload 3.28.401.9, and I bet he will do so.
Piszu said:
I tried to do everything like this thead:
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Every time I hae this:
I:\Flash_recovery_3.28.401.7\fastboot\adb>fastboot flash zip 4.16.401.10.zip
Click to expand...
Click to collapse
Dude, what the heck are you trying to do???
Those are not firmware zips, and you can not flash them that way!!!
The files from those threads are stock nandroids and stock recovery, completely different from firmware. If you don't know the difference, you need to read and learn before doing anything more.
Restoring stock nandroid and stock recovery in order to OTA (and update firmware) is a completely different approach than flashing a firmware.zip. A completely valid one, yes. But if you are trying to restore 3.28.401.9 nandroid, as I mentioned above, you need to follow the instructions in the first post of that thread. Why do you think those instructions are there???

Hey,
I have ARHD 43.0 on my HTC M8 and now want to update to ARHD 45.0.
Theoretically I could just flash ARHD 45.0 zip in TWRP and restart?
But now I want to know if there are certain advantages if I upgrade other things. (If there are upgrades).
For example I have TWRP 2.8.1.0. Is there an advantage for TWRP 2.8.7.0?
Or in my bootloader, the following Information stands:
"M8_UL PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.22.21331147A1.29G
OpenDSP-v46.2.2-00564-M8974_F0.0811
OS-3.28.401.9"
Is there a new kernel/firmware I can upgrade and if yes, does it has advantages?
Greetings

Tim0theus said:
I have ARHD 43.0 on my HTC M8 and now want to update to ARHD 45.0.
Theoretically I could just flash ARHD 45.0 zip in TWRP and restart?
But now I want to know if there are certain advantages if I upgrade other things. (If there are upgrades).
For example I have TWRP 2.8.1.0. Is there an advantage for TWRP 2.8.7.0?
Or in my bootloader, the following Information stands:
"M8_UL PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.22.21331147A1.29G
OpenDSP-v46.2.2-00564-M8974_F0.0811
OS-3.28.401.9"
Is there a new kernel/firmware I can upgrade and if yes, does it has advantages?
Click to expand...
Click to collapse
The info you posted indicated your firmware is old (KitKat). So you need to update to Lollipop firmware by one of the methods I've described above in order to run LP based Sense ROMs. Otherwise you will encounter severe bugs like extreme long boot times (or not boot) and broken WiFi.

redpoint73 said:
The info you posted indicated your firmware is old (KitKat). So you need to update to Lollipop firmware by one of the methods I've described above in order to run LP based Sense ROMs. Otherwise you will encounter severe bugs like extreme long boot times (or not boot) and broken WiFi.
Click to expand...
Click to collapse
Omg ok. Thank you. After the update my WiFi seems to work normal again. ^^

Related

[SOLVED] - [Q] Htc m8 Wifi wont turn on.

Hi to all, recently i got my m8 but wifi wont turn on at all. I got soff, unlocked by htcdev, rooted and arhd rom and elemental kernel.
I need help pls i read in a thread about flashing boot. Img for fixing my issue but im confused.
all-in said:
Hi to all, recently i got my m8 but wifi wont turn on at all. I got soff, unlocked by htcdev, rooted and arhd rom and elemental kernel.
I need help pls i read in a thread about flashing boot. Img for fixing my issue but im confused.
Click to expand...
Click to collapse
Check your firmware against your installed rom version - happens when firmware needs update
Htc
Forgot to mention that it wouldnt turn on since it came out the box.
Kernel - 3.4.0 elemental
Baseband - 1.19.21331147a1
Build numb - 3.28.401.9
Htc
Hboot - 3.18.0.0000
Radio- 1.19.21331147a1
Os - doesn't mention anything at all
all-in said:
Forgot to mention that it wouldnt turn on since it came out the box.
Kernel - 3.4.0 elemental
Baseband - 1.19.21331147a1
Build numb - 3.28.401.9
Click to expand...
Click to collapse
Yeah, that baseband is wrong against that 3.28.401.9, update firmware, should be 1.22.223.....
So which firmware you suggest, any link to download a zip to flash?
What about the os that is empty?
all-in said:
So which firmware you suggest, any link to download a zip to flash?
What about the os that is empty?
Click to expand...
Click to collapse
OS is blank because you got custom recovery, probably TWRP - flash firmware from within fastboot -- http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One_M8/401/3.28.401.9.zip
ill try this and let u know with what i came up.
i got a message : sending 'zip' (43011 KB)... OKAY [ 4.162s]
writing 'zip'... INFOadopting the signature contained in this image
FAILED (remote: not allowed)
all-in said:
ill try this and let u know with what i came up.
i got a message : sending 'zip' (43011 KB)... OKAY [ 4.162s]
writing 'zip'... INFOadopting the signature contained in this image
FAILED (remote: not allowed)
Click to expand...
Click to collapse
You gotta do - fastboot oem rebootRUU and only then execute the next command
fastboot oem rebootRUU command doesnt do anything so i booted in fastboot my own and this message came up. wana smash the phone on the wall. really omg.
target reported max download size of 1830612992 bytes
sending 'zip' (43011 KB)...
OKAY [ 2.599s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.858s
the baseband is still 1.19.21.....
is baseband = radio? cant get this to work.
soff
Ok what i need is s-off as i thought i had it. firewater doesnt work anymore as it mentiones in thread. there is sunshine method but it costs 25 dollars. lolz no way. is there another way to gain s off?
Im a bit confused . Please some help guys. I got s-on,does that mean i cant flash another firmware to get my wifi to work?
all-in said:
Im a bit confused . Please some help guys. I got s-on,does that mean i cant flash another firmware to get my wifi to work?
Click to expand...
Click to collapse
I would really recommend you S-Off your device, if you want to flash firmware
otherwise:
1- flash signed firmware incrementally, signed firmware expects previous updates to already be there, so if you skip directly to the last, you'll end up stuck with a high version firmware, but missing previous updates!!!!!!
2- you need to relock your bootloader, for fastboot oem rebootRUU mode flashes to work
Thanks for the response.
i tryed to s-off with firewater but i think this service has stopped?or does it still work as a method?
Device is s-on with unlocked bootloader. I read that with s-on u cant flash kernels-radios-baseband. Is radio equal to baseband? a guy in earlier post said that to get my wifi working i have to update the firmware. Exactly he said that baseband is wrong against that 3.28.401.9, update firmware, should be 1.22.223.
So how do i get that firmware + how i flash it + in what state should the device be?
thats what im asking
all-in said:
Thanks for the response.
i tryed to s-off with firewater but i think this service has stopped?or does it still work as a method?
Device is s-on with unlocked bootloader. I read that with s-on u cant flash kernels-radios-baseband. Is radio equal to baseband? a guy in earlier post said that to get my wifi working i have to update the firmware. Exactly he said that baseband is wrong against that 3.28.401.9, update firmware, should be 1.22.223.
So how do i get that firmware + how i flash it + in what state should the device be?
thats what im asking
Click to expand...
Click to collapse
hi, just a quick FYI, you need to quote (ie reply) or mention (for example @ nkk71 <- without the space) someone, for them to get notified ... otherwise it may go unnoticed.
anyway,
1- firewater is discontinued and in either case was not very suited for the M8 anyway, except for some of the very early models it would have failed. sunshine ($25) is the only known software solution for s-off
2- the response earlier about what you see in Settings->About (3.28.401.9) only refers to the version the ROM (not firmware) is based on
3- the firmware you get from a "fastboot getvar all" from version-main; if that's missing (a bug in some twrp versions), you can make an educated guess by looking at hboot version + radio + date in bootloader
4- radio is equal to baseband, but not equal to firmware.... firmware contains a lot more than just hboot and radio
5- with s-on, you can only flash signed firmwares (these are usually extracted from OTA.zips), and have to match your MID and CID... you also need to have bootloader relocked for RUU mode flash to work
^^ plus, since those are updates, they will only contain whatever was changed from the previous OTA update, that's why if you intend on staying s-on, you should flash those incrementally, and not skip a version
(for example, the "latest" signed firmware could just be an update to hboot or something, but missing all the previous radio, touchscreen, etc updates.... because and official update [by definition] implies all the previous updates were already installed)
hope that helps a bit
nkk71 said:
hi, just a quick FYI, you need to quote (ie reply) or mention (for example @ nkk71 <- without the space) someone, for them to get notified ... otherwise it may go unnoticed.
anyway,
1- firewater is discontinued and in either case was not very suited for the M8 anyway, except for some of the very early models it would have failed. sunshine ($25) is the only known software solution for s-off
2- the response earlier about what you see in Settings->About (3.28.401.9) only refers to the version the ROM (not firmware) is based on
3- the firmware you get from a "fastboot getvar all" from version-main; if that's missing (a bug in some twrp versions), you can make an educated guess by looking at hboot version + radio + date in bootloader
4- radio is equal to baseband, but not equal to firmware.... firmware contains a lot more than just hboot and radio
5- with s-on, you can only flash signed firmwares (these are usually extracted from OTA.zips), and have to match your MID and CID... you also need to have bootloader relocked for RUU mode flash to work
^^ plus, since those are updates, they will only contain whatever was changed from the previous OTA update, that's why if you intend on staying s-on, you should flash those incrementally, and not skip a version
(for example, the "latest" signed firmware could just be an update to hboot or something, but missing all the previous radio, touchscreen, etc updates.... because and official update [by definition] implies all the previous updates were already installed)
hope that helps a bit
Click to expand...
Click to collapse
Ok for start ill relock the device and i come back for further steps.i hope we can fix this.
all-in said:
Ok for start ill relock the device and i come back for further steps.i hope we can fix this.
Click to expand...
Click to collapse
i relocked my device.so what steps do i follow now?
any thread i should follow to get this updates step by step to reach the latest firware.
after some search on the forum i found these http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One_M8%2F which i think is the right step, but im confused in which folder should i pick and which firmware updates should i download and flash.
this is my getvar command layout :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4ADWM03441
(bootloader) imei: ----------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all-in said:
i relocked my device.so what steps do i follow now?
any thread i should follow to get this updates step by step to reach the latest firware.
after some search on the forum i found these http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One_M8%2F which i think is the right step, but im confused in which folder should i pick and which firmware updates should i download and flash.
this is my getvar command layout :
C:\adb>fastboot getvar all
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m8_ul
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__304
Click to expand...
Click to collapse
your hboot+baseband version would indicate you are either on 2.22.401.4 or .5 (minor difference)
you should flash in increasing order:
3.28.401.6.zip
3.28.401.7.zip
3.28.401.9.zip
from here: http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
fastboot oem rebootRUU
fastboot flash zip 3.28.401.6.zip
fastboot flash zip 3.28.401.6.zip <- yes twice, make sure it says successful/finished
fastboot reboot-bootloader
once you are back in bootloader, make sure the OS- line has been updated to the version you flashed, and is not in red (if it is in red, that means the flash didnt complete properly)
then repeat the above commands for the 2 other firmwares
Note: the higher the firmware, the less chances of getting S-OFF, just to let you know

[Q] Firmware issues on HTC one m8

Hi guys,
I've just updated my android rev 10.1 to 30.1 but it's stuck in a reboot cycle. Could be because I didn't update the firmware? Still on the older 3.x firmware.
So trying to update firmware - I have the 3.28.401.9 zip in my sdcards root folder but trying to install from zip (TWRP 2.8) it says unable to open zip file, error flashing.
If I try using fastboot flash:
C:\>fastboot flash zip c:\3.28.401.9.zip
sending 'zip' (43011 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
FAILED (remote: not allowed)
Key bits of information from my fastboot getvar shows something not right:
C:\>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.16.0.0000
INFOversion-baseband: 1.16.2133156.UA15G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: xxxxxxxx
INFOimei: xxxxxxxxx
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: ab0efa49
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Whats scary is that it doesn't even show my firmware version?! my phone is unlocked with htcdev - shows "unlocked" and "tampered" so I don't picture s-on is an issue.
Any suggestions on how to unbrick?
chamelion said:
Hi guys,
I've just updated my android rev 10.1 to 30.1 but it's stuck in a reboot cycle. Could be because I didn't update the firmware? Still on the older 3.x firmware.
So trying to update firmware - I have the 3.28.401.9 zip in my sdcards root folder but trying to install from zip (TWRP 2.8) it says unable to open zip file, error flashing.
If I try using fastboot flash:
C:\>fastboot flash zip c:\3.28.401.9.zip
sending 'zip' (43011 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
FAILED (remote: not allowed)
Key bits of information from my fastboot getvar shows something not right:
C:\>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.16.0.0000
INFOversion-baseband: 1.16.2133156.UA15G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: xxxxxxxx
INFOimei: xxxxxxxxx
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: ab0efa49
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Whats scary is that it doesn't even show my firmware version?! my phone is unlocked with htcdev - shows "unlocked" and "tampered" so I don't picture s-on is an issue.
Any suggestions on how to unbrick?
Click to expand...
Click to collapse
You can't flash firmware via recovery!
Search for vomers firmware thread all instructions are there.
You need an 02 firmware. The wwe ones don't work on your phone. And to flash firmwares you need to be in RUU mode.
But look for your official firmware first. Or return the phone to its original stock rom + recovery and update via official ota's
Thanks! So I had tried to flash via RUU mode but it had errored - presumably cause it rejected the ROM file.
My initial firmware update when I updated to rev10.1 from stock android was from vomer's guide. Should I be downloading 4.16.1540.8 without red text?
chamelion said:
Thanks! So I had tried to flash via RUU mode but it had errored - presumably cause it rejected the ROM file.
My initial firmware update when I updated to rev10.1 from stock android was from vomer's guide. Should I be downloading 4.16.1540.8 without red text?
Click to expand...
Click to collapse
basically this is what I get if I Try to flash the above in RUU mode:
C:\>fastboot flash zip c:\fw_4.16.1540.8_custom_without_red_text.zip
sending 'zip' (29494 KB)... OKAY
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
You can not flash those firmwares on your device. The steps you are taking are all wrong !
Mr Hofs said:
You can not flash those firmwares on your device. The steps you are taking are all wrong !
Click to expand...
Click to collapse
Which one can I flash
I found http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/206/
but that's from 2008 and can't be right for an M8...
sorry to be such a bother - really am in a horrible spot and would really appreciate your help.
Anyone? Please?
Go to the general section and look for the stock backup thread. Have a real good read there and return your phone to FULL stock and update via ota.
This one is the latest O2 firmware: https://www.androidfilehost.com/?fid=95784891001603798
You cant install the Lollipop dev edition firmware when you are on the O2 cid. So or het s-off and change it or wait for OTA from O2.
Latest aviable stock backup: https://mega.co.nz/#F!odoimZRD!fXWN36-1i3AUdkAHcgfy_A
Petert87 said:
This one is the latest O2 firmware: https://www.androidfilehost.com/?fid=95784891001603798
You cant install the Lollipop dev edition firmware when you are on the O2 cid. So or het s-off and change it or wait for OTA from O2.
Latest aviable stock backup: https://mega.co.nz/#F!odoimZRD!fXWN36-1i3AUdkAHcgfy_A
Click to expand...
Click to collapse
yep latest o2 firmware didn't work either
sending 'zip' (52330 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
I'm going to try reverting back to the old version of android rev that I had and see if my phone gets out the reboot loop. If so I'll probably revisit flashing at some later point when I'm less frustrated, ideally first s-off my phone.
if that still doesn't work I'll probably have to return to stock
chamelion said:
yep latest o2 firmware didn't work either
sending 'zip' (52330 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
I'm going to try reverting back to the old version of android rev that I had and see if my phone gets out the reboot loop. If so I'll probably revisit flashing at some later point when I'm less frustrated, ideally first s-off my phone.
if that still doesn't work I'll probably have to return to stock
Click to expand...
Click to collapse
Maybe your firmware is newer then the link I gave. But with the O2 cid you cant use lollipop with sense. You cant Flash that firmware. So you have to go back on stock.
Verstuurd van mijn HTC One_M8
im with s-on
cidnum:HTC__K18
when im trying to flash the new firmware im getting this
C:\android-sdk-windows\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1826414592 bytes
sending 'zip' (29494 KB)...
OKAY [ 2.342s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 2.841s
any idea whats wrong ??
Petert87 said:
Maybe your firmware is newer then the link I gave. But with the O2 cid you cant use lollipop with sense. You cant Flash that firmware. So you have to go back on stock.
Verstuurd van mijn HTC One_M8
Click to expand...
Click to collapse
ah that sucks. ah well.
So to go back on stock, I wan tto use the "Method 2 - flashing RUU (ROM Update Utility)" method. It's not entirely clear on how to do this - do I download the stock recovery 1.54.2016.5 img and folder onto my pc and issue fastboot oem lock command? or does the folder go on the sdcard and the img on my computer? or neither??
chamelion said:
ah that sucks. ah well.
So to go back on stock, I wan tto use the "Method 2 - flashing RUU (ROM Update Utility)" method. It's not entirely clear on how to do this - do I download the stock recovery 1.54.2016.5 img and folder onto my pc and issue fastboot oem lock command? or does the folder go on the sdcard and the img on my computer? or neither??
Click to expand...
Click to collapse
Ah man really? What do you dont understand?
If you want to use that RUU to have that developer update to Lollipop you have to change the O2 cid. If you want to change the cid you have to be s-off. Are you not? Use sunshine.
Verstuurd van mijn HTC One_M8
resolved my issue:
- went back to android rev 11.1 (what i was previously using) and wiped device.
- once booted, installed sunshine and went s-off
- updated cid to supercid
- updated firmware to latest 4.x
- updated and wiped into andrdoid rev 30.1
Working like a charm now
Thanks everyone for the massive help!
chamelion said:
resolved my issue:
- went back to android rev 11.1 (what i was previously using) and wiped device.
- once booted, installed sunshine and went s-off
- updated cid to supercid
- updated firmware to latest 4.x
- updated and wiped into andrdoid rev 30.1
Working like a charm now
Thanks everyone for the massive help!
Click to expand...
Click to collapse
Glad to hear! Hope the $25 for sunshine was worth it
Verstuurd van mijn HTC One_M8
Petert87 said:
Glad to hear! Hope the $25 for sunshine was worth it
Verstuurd van mijn HTC One_M8
Click to expand...
Click to collapse
it's a lot of money for what it is, but to be fair $25 for having a working phone that I can now flash as I like and is now running lollipop was worth it!
chamelion said:
it's a lot of money for what it is, but to be fair $25 for having a working phone that I can now flash as I like and is now running lollipop was worth it!
Click to expand...
Click to collapse
I know and respect the work the sunshine team does. But normally Vodafone is quick with updates
Verstuurd van mijn HTC One_M8

Brick?

Hi,
I have a big problem with my HTC one M8.
I was tring to back sense from GPE conversion, and now I do not know how to proceed. Maybe bricked my phone.
My situation is as follows:
Relocked. Adb can't find my device so I can not unlock again.
No recovery, no ROM installed. So, I can not flag USB debug. Can't proceed since relocked. Any suggestion?
Matteo
mtt_73 said:
Hi,
I have a big problem with my HTC one M8.
I was tring to back sense from GPE conversion, and now I do not know how to proceed. Maybe bricked my phone.
My situation is as follows:
Relocked. Adb can't find my device so I can not unlock again.
No recovery, no ROM installed. So, I can not flag USB debug. Can't proceed since relocked. Any suggestion?
Matteo
Click to expand...
Click to collapse
im going to assume your phones is s-off?
Yes s-off. Not sure how, but I am in recovery. Something looks like stock, I think. What can I do from here? Should I install twrp recovery? Or what else?
Thank you.
Sent from my Nexus 4 using XDA Free mobile app
mtt_73 said:
Yes s-off. Not sure how, but I am in recovery. Something looks like stock, I think. What can I do from here? Should I install twrp recovery? Or what else?
Click to expand...
Click to collapse
You can't install custom recovery with a (re)locked bootloader.
With s-off, you shouldn't ever relock the bootloader, as its no longer a requirement to RUU once s-off. But that's neither here nor there at this point, just info for future reference.
Any response to: fastboot devices
Make sure the phone is in fastboot mode.
Try to run the GPE RUU with phone in fastboot mode, to get the phone back up and running at least. Assuming you are still on the GPE CID and MID.
How can I flash ruu gpe with boot loader relocked? Is it possible? It gives me error.
Sent from my Nexus 4 using XDA Free mobile app
mtt_73 said:
How can I flash ruu gpe with boot loader relocked? Is it possible? It gives me error.
Click to expand...
Click to collapse
I think you've got it backwards. With s-on the bootloader actually needs to be relocked (or locked) in order to RUU.
With s-off, RUU will run whether the bootloader is unlocked, relocked, or locked.
In other words, the bootloader being relocked is not the problem.
What is the error message?
Did you change the CID/MID yet (what are they currently)? The CID and MID need to match the RUU.
Hi guys,
I have a problem with my one m8 at&t, unlocked, and i can only navigate in hboot in hboot & fastboot modes. no htc logo screens or sth like this.
when i try to go to recovery or do factory reset i get three android skaters on the screen for cca 0.2 sec and it returns to fastboot usb mode.
Its friends phone so i dont know what he had done to it, but i just want to make it work again, wiping data is not the problem.. can you tell me what should i do to get recovery( TWRP/ CWM) working, thats all i need for now because im going to s-off later. i tried to do something but it didnt work.
some things i have tried in that order:
1)flashing twrp via fastboot:
C:\adb>fastboot flash recovery C:\adb\openrecovery-twrp-2.8.5.0-m8.img
target reported max download size of 1830727680 bytes
sending 'recovery' (16086 KB)...
OKAY [ 1.438s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.500s
2) flashing stock recovery via fastboot( i dont know if i had the right one):
C:\adb>fastboot flash recovery C:\adb\recovery.img
target reported max download size of 1830727680 bytes
sending 'recovery' (14109 KB)...
OKAY [ 1.262s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 1.277s
3) 'booting' same stock recovery- what changed now are 3 android skaters for cca 0.2 sec when i try to enter recovery or start factory reset from bootloader, before it just went to fastboot usb mode.
C:\adb>fastboot boot recovery.img
creating boot image...
creating boot image - 14450688 bytes
downloading 'boot.img'...
OKAY [ 1.273s]
booting...
OKAY [ -0.000s]
finished. total time: 1.273s
Can please anyone help me? Thanks in advance
Here is data about the phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT.............8
(bootloader) imei: 35...........30
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
redpoint73 said:
I think you've got it backwards. With s-on the bootloader actually needs to be relocked (or locked) in order to RUU.
With s-off, RUU will run whether the bootloader is unlocked, relocked, or locked.
In other words, the bootloader being relocked is not the problem.
What is the error message?
Did you change the CID/MID yet (what are they currently)? The CID and MID need to match the RUU.
Click to expand...
Click to collapse
I will try again later. If I am not wrong the error is about partition problem. It does not recognize the zip.
Sent from my Nexus 4 using XDA Free mobile app
mtt_73 said:
I will try again later. If I am not wrong the error is about partition problem. It does not recognize the zip.
Click to expand...
Click to collapse
When you get a chance, you should list exactly (in detail, and in order) what you have done to the phone to get to this point.
I can't tell how far you go in the conversion (GPE>Sense) but it seems you at least got partway (if you indeed got a partition size error).
Also need to know current CID and MID.
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
mato123 said:
I have a problem with my one m8 at&t, unlocked, and i can only navigate in hboot in hboot & fastboot modes. no htc logo screens or sth like this.
when i try to go to recovery or do factory reset i get three android skaters on the screen for cca 0.2 sec and it returns to fastboot usb mode.
Its friends phone so i dont know what he had done to it, but i just want to make it work again, wiping data is not the problem.. can you tell me what should i do to get recovery( TWRP/ CWM) working, thats all i need for now because im going to s-off later. i tried to do something but it didnt work.
some things i have tried in that order:
Click to expand...
Click to collapse
I would highly suggest not to post to another user's troubleshooting thread like this, as it doesn't look like the same problem at all (and in my experience rarely is, even when folks will post "I have the same issue"). You really should have just started your own thread, and would have been justified doing so IMO. Posting here just confuses matters for you, the OP and those trying to help.
But DON'T start another thread now (and add even more confusion). I'll ask the mods if they can move this post to its own thread.
ok, sorry
redpoint73 said:
When you get a chance, you should list exactly (in detail, and in order) what you have done to the phone to get to this point.
I can't tell how far you go in the conversion (GPE>Sense) but it seems you at least got partway (if you indeed got a partition size error).
Also need to know current CID and MID.
Click to expand...
Click to collapse
Thanks for reply.
I went now in fastoob mode and tried to flash the RUU GPE again.
The error is:
macbooks-MacBook-Proownloads macbook$ ./fastboot-mac flash RUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip
unknown partition 'RUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip'
error: cannot determine image filename for 'RUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip'
Just to clarify. I successfully when in GPE (with conversation). The problem was when going back to Sense. I do not know exactly what I did wrong.
My CID is 11111111
My MID is 0P6B10000
Really do not know how to proceed.
M
I unfortunately don't know jack about how to use fastboot and other actions on a Mac. I'm also not that familiar with running the RUU as a zip (I always do it on a PC with the RUU .exe).
But it looks like you just have the command syntax wrong. I think it should be:
fastboot oem rebootRUU
fastboot flash zip filename.zip
But it also look to me like nothing is actually "wrong" (aside from adb not working?). The phone not booting after relocking the bootloader is normal and intentional. You should just be able to run the desired Sense RUU, provided you have the right MID.
I am back to GPE!
Stupid me! I missed a "zip" in the fastboot command...
Thank you for support!
I will try again to go back to Sense.
M
mtt_73 said:
I am back to GPE!
Stupid me! I missed a "zip" in the fastboot command...
Thank you for support!
I will try again to go back to Sense.
M
Click to expand...
Click to collapse
hehe try watch this movie: https://www.youtube.com/watch?v=CCGj0rOuiR4
Most important is the firmware flash... so partition layout etc is changed to sense like after that you can flash sense roms etc. (for example viper rom as in video)
0kk0 said:
Most important is the firmware flash... so partition layout etc is changed to sense
Click to expand...
Click to collapse
Some folks have had to do this, some haven't. But yes, if the RUU fails and gives a image size error, flashing the Sense firmware manually (then RUU) is the right thing to do.
This part has never made sense to me, since the RUU flashes firmware anyway, by definition. All I can guess, is that it has to do with the sequence in which the firmware is flashed (versus other partitions) in the RUU.
redpoint73 said:
Some folks have had to do this, some haven't. But yes, if the RUU fails and gives a image size error, flashing the Sense firmware manually (then RUU) is the right thing to do.
This part has never made sense to me, since the RUU flashes firmware anyway, by definition. All I can guess, is that it has to do with the sequence in which the firmware is flashed (versus other partitions) in the RUU.
Click to expand...
Click to collapse
So, even if the sense RUU is available, to go back to sense I need to flash the firmware before to flash the RUU. Right?
Sent from my HTC One_M8 using xda Forum
mtt_73 said:
So, even if the sense RUU is available, to go back to sense I need to flash the firmware before to flash the RUU. Right?
Click to expand...
Click to collapse
I just said in the post you quoted: some folks are fine just running the RUU (to convert from GPE to Sense); but when the RUU alone doesn't work, run the firmware manually first, then the RUU.
Running the firmware manually first (then RUU) has a higher chance of working, I'd say.
redpoint73 said:
I just said in the post you quoted: some folks are fine just running the RUU (to convert from GPE to Sense); but when the RUU alone doesn't work, run the firmware manually first, then the RUU.
Running the firmware manually first (then RUU) has a higher chance of working, I'd say.
Click to expand...
Click to collapse
I did it. I am back to Sense now.
Any advice to remove tell HTC problem? I mean it says that I have a testing device. Is it because I am s-off? Should I go for s-on again? And how?
TY!

find out which RUU i need to install

I just received HTC one m8 and i want to install the right RUU for my device from HTC support site
can you please help, my fastboot vars :
C:\Program Files\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.050s
4.16.1540.8 - http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
then you can do OTA to Marshmallow 6.12.1540.4
Thanks,
even if I have cid = 11111111 ?
Yes - 11111111 or SuperCID is a universal CID, RUU/OTA will accept that.
You need to relock bootloader before you run RUU because your device now is S-On
and you need a Windows PC with USB2.0 and latest HTC USB driver installed.
If you're not sure about HTC USB driver - download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install then after uninstall HTC Sync Manager but leave the HTC USB driver
ckpv5 said:
Yes - 11111111 or SuperCID is a universal CID, RUU/OTA will accept that.
Click to expand...
Click to collapse
Thanks
and another questions to be sure:
1) I get the device with 4.16.1540.8 installed , why i need to install it again ?
2) my device is s-on , does it affects on updates with supercid ?
1. I don't know why - you asked for the RUU so I gave you the link. You should know better whether you need it or not.
2. No .. as long as the ROM in your system now is non-rooted (never rooted) and stock recovery is installed .. should be fine.
If you're not sure then run the RUU then do OTA. Before that you can try to update and see whether it will success or fail.
Settings - about - software update.
ckpv5 said:
1. I don't know why - you asked for the RUU so I gave you the link. You should know better whether you need it or not.
2. No .. as long as the ROM in your system now is non-rooted (never rooted) and stock recovery is installed .. should be fine.
If you're not sure then run the RUU then do OTA. Before that you can try to update and see whether it will success or fail.
Settings - about - software update.
Click to expand...
Click to collapse
when I try to update from Settings the device found new version 4.17.1540.9 but get the following message :
"We have determined that your phone may be running a modified version of its system software. For your protection, we cannot update your phone. Please revert your phone to the official HTC system software to update your phone. If you did not modify your system software or would like help reverting your system, please contact us via the support section at wwwhtccom"
Your getvar doesn't show any irregularity.
I updated my M8 also on same CID 11111111 and MID 0P6B12000
So I have no idea .. I first helped because you asked for RUU.
Lets wait if anyone else will come to help for other problem
@redpoint73 - if you are around .. maybe you can help to confirm whether this device is AT&T or Developer Edition.
I have a feeling this is an AT&T converted to DEV ED and re S-On
@tapuz12ewq
Another possibility is your device is a AT&T originally .. you also can install RUU for AT&T, only thing is there is no Marshmallow update yet for AT&T - you can get the RUU 4.28.502.2 here : http://forum.xda-developers.com/showthread.php?t=2751432
ckpv5 said:
Your getvar doesn't show any irregularity.
I updated my M8 also on same CID 11111111 and MID 0P6B12000
So I have no idea .. I first helped because you asked for RUU.
Lets wait if anyone else will come to help for other problem
@redpoint73 - if you are around .. maybe you can help to confirm whether this device is AT&T or Developer Edition.
I have a feeling this is an AT&T converted to DEV ED and re S-On
@tapuz12ewq
Another possibility is your device is a AT&T originally .. you also can install RUU for AT&T, only thing is there is no Marshmallow update yet for AT&T - you can get the RUU 4.28.502.2 here : http://forum.xda-developers.com/showthread.php?t=2751432
Click to expand...
Click to collapse
Thanks,
so I little bit confused , to fix it , which RUU are safe to install , 4.28.502.2 or 6.12.1540.4 ?
6.12.1540.4 definitely won't work, you'll get error 155 unless HTC already fix the RUU.
You can only try either 4.16.1540.8 or 4.28.502.2 and I'm not so sure whether installing 4.28.502.2 will success or not because your current version is 4.16.1540.8
another RUU that you can try is 4.17.1540.9 - http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_446501_signed_2.exe
Or ... S-Off the device with SunShine app (USD25) then you can fix it with any RUU.
I got to rest now ... it's 3 AM here ... good luck
ckpv5 said:
6.12.1540.4 definitely won't work, you'll get error 155 unless HTC already fix the RUU.
You can only try either 4.16.1540.8 or 4.28.502.2 and I'm not so sure whether installing 4.28.502.2 will success or not because your current version is 4.16.1540.8
another RUU that you can try is 4.17.1540.9 - http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_446501_signed_2.exe
Or ... S-Off the device with SunShine app (USD25) then you can fix it with any RUU.
I got to rest now ... it's 3 AM here ... good luck
Click to expand...
Click to collapse
I try to enter to stock recovery menu and find on the top screen "android stock recovery LRX22C"
do you familiar with this id LRX22C ? can it cause to not get the OTA ?
Thanks
tapuz12ewq said:
I try to enter to stock recovery menu and find on the top screen "android stock recovery LRX22C"
do you familiar with this id LRX22C ? can it cause to not get the OTA ?
Thanks
Click to expand...
Click to collapse
That's stock recovery for lollipop.
LRX22C - Android 5.0.1
LRX22G - Android 5.0.2
So which of the RUU that your tried ? I have a feeling that both will fail unless the device is S-Off again. The previous owner shouldn't change the S-Off status unless he put all the correct CID/MID to the device.
Maybe it needs the actual CID BS_US001 instead of 11111111 to get the OTA, personally I never have any problem with 11111111
ckpv5 said:
That's stock recovery for lollipop.
LRX22C - Android 5.0.1
LRX22G - Android 5.0.2
So which of the RUU that your tried ? I have a feeling that both will fail unless the device is S-Off again. The previous owner shouldn't change the S-Off status unless he put all the correct CID/MID to the device.
Maybe it needs the actual CID BS_US001 instead of 11111111 to get the OTA, personally I never have any problem with 11111111
Click to expand...
Click to collapse
yes, installed successfully 4.17.1540.9
thank you very much
i will try to OTA later to marshmallow
tapuz12ewq said:
yes, installed successfully 4.17.1540.9
thank you very much
i will try to OTA later to marshmallow
Click to expand...
Click to collapse
after I successfully installed 4.17.1540.9 from RUU
I tried to install the marshmallow update from by OTA but it failed with the same error :
"We have determined that your phone may be running a modified version of its system software. For your protection, we cannot update your phone. Please revert your phone to the official HTC system software to update your phone. If you did not modify your system software or would like help reverting your system, please contact us via the support section at www.htc.com"
how can I install the next update ?
It's weird that the RUU can be successfully installed but not OTA.
So .. you can try this to install next RUU 6.12.1540.4
1. Download the 6.12.1540.4 firmware - https://drive.google.com/file/d/0B4jGj3SfskzMbzBtd1R1VHlmbVU/view?usp=sharing
2. Download the 6.12.1540.4 RUU if you still don't have it - http://www.htc.com/us/support/htc-one-m8/news/
3. place the firmware.zip that you downloaded in your fastboot folder then open command prompt from your fastboot folder
4.Put your device to bootloader/fastboot mode
Run below commands:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
You'll see -
if failed : FAILED (remote: 90 hboot pre-update! please flush image again immediately)
repeat fastboot flash zip firmware.zip
fastboot reboot-bootloader
5. Run 6.14.1540.4 RUU
6. Done
ckpv5 said:
It's weird that the RUU can be successfully installed but not OTA.
So .. you can try this to install next RUU 6.12.1540.4
1. Download the 6.12.1540.4 firmware - https://drive.google.com/file/d/0B4jGj3SfskzMbzBtd1R1VHlmbVU/view?usp=sharing
2. Download the 6.12.1540.4 RUU if you still don't have it - http://www.htc.com/us/support/htc-one-m8/news/
3. place the firmware.zip that you downloaded in your fastboot folder then open command prompt from your fastboot folder
4.Put your device to bootloader/fastboot mode
Run below commands:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
You'll see -
if failed : FAILED (remote: 90 hboot pre-update! please flush image again immediately)
repeat fastboot flash zip firmware.zip
fastboot reboot-bootloader
5. Run 6.14.1540.4 RUU
6. Done
Click to expand...
Click to collapse
can I instead move from s-on to s - off with the sunshine app, maybe after that i will get the OTA ?
Yes .. that's a wise move to S-Off then you can change the CID to BS_US001 then you should be able to install OTA whenever it is available.
Also note, this 6.12.1540.4 maybe the last major update as the HTC support for major update end by March or April 2016.
ckpv5 said:
Yes .. that's a wise move to S-Off then you can change the CID to BS_US001 then you should be able to install OTA whenever it is available.
Also note, this 6.12.1540.4 maybe the last major update as the HTC support for major update end by March or April 2016.
Click to expand...
Click to collapse
BS_US001 also will keep my phone sim free ?
what about MID ?
Your phone is already SIM unlocked.
Change of CID has no effect on it.
No need to change MID as that's the Developer Ed MID
ckpv5 said:
Your phone is already SIM unlocked.
Change of CID has no effect on it.
No need to change MID as that's the Developer Ed MID
Click to expand...
Click to collapse
I not sure that it seem unlock originally , why the seller change to super cid ?
and you suspect it was at&t ?

RUU for HTC 10 : HTC__001 WWE / 2PS6200

I spend almost 6 hours to find RUU, and nothing...
S:\! Sunshine\Android\M7\HTC 10>fastboot getvar mid
mid: 2PS620000
finished. total time: 0.001s
S:\! Sunshine\Android\M7\HTC 10>fastboot getvar cid
cid: HTC__001
finished. total time: 0.002s
If you want to ask if i use this : RUU Zip (Stock Signed)
CID: HTC__001/HTC__034/HTC__A07/HTC__J15/HTC__M27/HTC__016/HTC__002 | MID: 2PS620000
1.90.401.5 (by @djluisbento)
yes i used this and i'm geting: header error 22 :C
I just want to get working RUU > install > update to nugat
Currently i'm on my TWRP Stock Backup and i can't get update, cuz i getting error.
Boot to download mode and look at OS line, download the matching RUU and flash it.
The 401 wwe versions can be easily found here in the HTC 10 subforum.
Hint :
Perform a search in the stock backup thread.....
S:\! Sunshine\Android\M7\HTC 10>fastboot flash zip 2PS6IM[email protected]60331.4_41.13_F_release_490497_combined_signed_2_4.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (208927 KB)...
OKAY [ 10.832s]
writing 'zip'...
(bootloader) HOSD CL#738269
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_N
(bootloader) 6XJwu
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 15.560s
Tested RUU's
2PS6IMG_PE[email protected]60331.4_41.13_F_release_478442_combined_signed_2_4
2PS6IM[email protected]60331.4_41.13_F_release_490497_combined_signed_2_4
2PS6IMG_PERFUM[email protected]4061226_79.07_F_release_493442_signed
2PS6IMG_PERFUME[email protected]61226_79.07_F_release_507791_signed_2_4
Flash newer firmware then try again
ergolau said:
Flash newer firmware then try again
Click to expand...
Click to collapse
Newer firmware, like?
SunshineDude said:
Newer firmware, like?
Click to expand...
Click to collapse
https://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
get firmware matched to your targeted RUU from this thread
@ergolau i'm not S-OFF
First lines from post
FIRST THINGS FIRST:
This is for GSM PHONES which have been set S-OFF - no CDMA (Sprint & Verizon) here! S-ON people: Please refer to HTC RUU methods or "Stock Backup and OTA" method. (not provided here).
SunshineDude said:
@ergolau i'm not S-OFF
First lines from post
FIRST THINGS FIRST:
This is for GSM PHONES which have been set S-OFF - no CDMA (Sprint & Verizon) here! S-ON people: Please refer to HTC RUU methods or "Stock Backup and OTA" method. (not provided here).
Click to expand...
Click to collapse
If you do what @Mr Hofs said, you'd be done already...
Sent from my HTC6545LVW using Tapatalk
I've entered the os number and download 3 Ruu's and still error
In this post:
https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Key words iv'e used: 1.30.401.1, HTC__001 WWE
Okay i found the solution...
SDCard has not working propertly, i've used another one with 2PS6IMG_PERFUM[email protected]61226_79.07_F_release_495903_signed_2.zip and it start flashing
This same RUU wont flash via RUU mode Fastboot... #HEADER_ERROR
On M7 i don't get these problems with RUU.
Maybe i'm doing something wrong...
SunshineDude said:
Okey i found the solution...
SDCard has not working propertly, i've used another one with 2PS6IMG_PERFUM[email protected]61226_79.07_F_release_495903_signed_2.zip and it start flashing
This same RUU wont flash via RUU mode Fastboot... #HEADER_ERROR
On M7 i don't get these problems with RUU.
Maybe i'm doing something wrong...
Click to expand...
Click to collapse
Remake the zip to 2PS6IMG.zip and copy of te the sdcard, boot to download mode and it wil be recognized. Flash it......
Stop making it very difficult with fastboot commands, not needed at all. And stop texting all RUU files, totally a waste of time. You need the RUU with the NUMBER that is WRITTEN next to OS in the DOWNLOAD mode. Stop doing all sorts of stuff that is totally irrelevant. If the RUU.zip from here doesn't work you do something wrong.
If your OS line is 2.41.401.x you download that RUU and do as i wrote in the first lines of this post.
You try all different sorts of RUU's so that indicates to me that you didn't bother to check out your download mode
Generally i get what i want.
Sorry for shi* post, but sometimes i just dont get it.
I know that the stock roms have a os versions and phone only accept only specific one.
But sometimes like today my sdcard just trick me so hard ;d and i just trying a different method like fastboot oem rebootRUU + fastboot flash zip zipname.zip, thats all.
Thanks for your time @Mr Hofs and @santod040 (Your rom on M7 GPE
is one of the better ones) .
SunshineDude said:
Generally i get what i want.
Sorry for shi* post, but sometimes i just dont get it.
I know that the stock roms have a os versions and phone only accept only specific one.
But sometimes like today my sdcard just trick me so hard ;d and i just trying a different method like fastboot oem rebootRUU + fastboot flash zip zipname.zip, thats all.
Thanks for your time @Mr Hofs and @santod040 (Your rom on M7 GPE
is one of the better ones) .
Click to expand...
Click to collapse
"generally i get what i want" .....jeeeze that comment made me crinch for a moment. Actually the lack of proper reading our posts had you downloading all sorts of RUU files which were unnecessary. It's not your sdcard that tricked you it's your unfocused mind.
Cheers
htc 10 please help me
i have HTC 10
***UNLOCKED***
S-OFF
htc_pmeuhl
CID--HTC__621
MID--2PS620000
RADIO--1.0.U01................
OS--2.41.709.73
and twrp recovery INSTALLED and have a Viper Rom but problem is phone hang on some function and heat up and shutdown like when i make shortcut an app from app drawer to home screen phone is hang with no response and heat and shutdown and also when i download from chrome or other apps so i decided to go to the original software no matter is Marshmallow or Nougat or Oreo but i want to go original what i need to do my question is from which method i want to install like from ruu.exe or ruu.zip or i need to flash stock recovery first or re-lock the boot-loader or do S-ON from S-OFF state please give all the links which i needs i am very thank full in advance plz.
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
i have HTC 10
***UNLOCKED***
S-OFF
htc_pmeuhl
CID--HTC__621
MID--2PS620000
RADIO--1.0.U01................
OS--2.41.709.73
and twrp recovery INSTALLED and have a Viper Rom but problem is phone hang on some function and heat up and shutdown like when i make shortcut an app from app drawer to home screen phone is hang with no response and heat and shutdown and also when i download from chrome or other apps so i decided to go to the original software no matter is Marshmallow or Nougat or Oreo but i want to go original what i need to do my question is from which method i want to install like from ruu.exe or ruu.zip or i need to flash stock recovery first or re-lock the boot-loader or do S-ON from S-OFF state please give all the links which i needs i am very thank full in advance plz.
sadaqatrajput said:
i have HTC 10
***UNLOCKED***
S-OFF
htc_pmeuhl
CID--HTC__621
MID--2PS620000
RADIO--1.0.U01................
OS--2.41.709.73
and twrp recovery INSTALLED and have a Viper Rom but problem is phone hang on some function and heat up and shutdown like when i make shortcut an app from app drawer to home screen phone is hang with no response and heat and shutdown and also when i download from chrome or other apps so i decided to go to the original software no matter is Marshmallow or Nougat or Oreo but i want to go original what i need to do my question is from which method i want to install like from ruu.exe or ruu.zip or i need to flash stock recovery first or re-lock the boot-loader or do S-ON from S-OFF state please give all the links which i needs i am very thank full in advance plz.
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
i have HTC 10
***UNLOCKED***
S-OFF
htc_pmeuhl
CID--HTC__621
MID--2PS620000
RADIO--1.0.U01................
OS--2.41.709.73
and twrp recovery INSTALLED and have a Viper Rom but problem is phone hang on some function and heat up and shutdown like when i make shortcut an app from app drawer to home screen phone is hang with no response and heat and shutdown and also when i download from chrome or other apps so i decided to go to the original software no matter is Marshmallow or Nougat or Oreo but i want to go original what i need to do my question is from which method i want to install like from ruu.exe or ruu.zip or i need to flash stock recovery first or re-lock the boot-loader or do S-ON from S-OFF state please give all the links which i needs i am very thank full in advance plz.
Click to expand...
Click to collapse
Flash this using SD card method.
Do NOT relock bootloader or return to s-on.
https://androidfilehost.com/?fid=745425885120725537
Sent from my Pixel 3 XL using Tapatalk

Categories

Resources