Related
Hi all,
I need to know if someone can help me to bring to life again my lovely JasJam,that was working great until this morning.
The problem is this one:
I was going outside the country this morning (I am in Czech rep. now and I went to Slovakia) and on the way back I realize that my hermes (herm100,spl2.10 olipro,RADIO 1.57,schaps 3.54bITA) was without any signal. I tried an other SIM card and the result was the same.
Once at home, I tried to reinstall schaps,everything was ok,except the signal still missing.At this point,I tried to reinstall the Radio and the bar was still at 0% and after 3 minutes it gave me error 262 and now is with the screen always on (illuminated) on the KITL page and it doesn't start anymore...
please,someone with a good heart,help me.
http://forum.xda-developers.com/showthread.php?t=286755
back a live any hermes ( that's as worked whith my hems)
I don't know that's work but try install any official rom from HTC that's have radio information and then you can install any other. but extrat the signedruu. (that's the rom file) and then put the file into a sd card start your herm by pressing simultaneous the power, and ok button and prissing the reset hole whith the stylus pen and follow the steps it's very easy.
thank you Zefo,
but I am Stuck on the bootloader page, I cannot insert a original Rom because ActiveSync doesn't recognize the phone.
Being in the Bootloader page is fine. Just run the RUU Wrapper, it will connect.
What caused the problem? I am a little worried as I am going to Tenerife on Friday and I am running Radio 1.54.07.00 as well (I assume thats what you meant when you said 1.57)...
Is there any reports of going abroad messing up your phone when its been modified with new radio/rom?
Hi Allan,
I would like to run RUU,but ActiveSync doesn't connect my phone,so when I launch it,they don't communicate. The computer see the device,but ActiveSync not, infact, If I try it,Itgive me error 260 Update Error (I used Hard SPL v7)
Stick what you need to flash on a MicroSD card and stick it in the phone, you should be able to boot off of that.
Theres instructions somewhere in the forum on it all.
I got the axact parameters of yours Hermes, STARFURY, it changes only the rom (mine is/was schaps 3.54b).
I am not able to find what you suggest me but I cannot go on the SD if the phone doesn't turn on the OS...How can I do?
Get a usb cardreader plug your microsd card into an sd card adaptor, then plug that into the cardreader and the cardreader into hte PC. Transfer the stuff onto the microsd card and stick it in the phone,.
but I have just to put the 2 files RUU Wrapper (Bootloader) on it in the main root??and how can I make them start?
I was able to go into the OS but I am still with no GSM and if I try to update it,it stops at 12% also with original ROM.
Can anyone give me a link where can I see where the radio chip is located on the mainboard please?
So I was given this GPS and it's throwing me for a loop... You can power it up and see the Magellan splash screen. The progress bar will go all the way across (or sometimes stop one notch before the end...) then it'll freeze. This is as far as I've been able to get it.
When connected to a computer, it'll register as two devices. First as an unknown device, then halfway through disconnects and shows up as a Windows mobile device. A few seconds once the progress bar goes all the way across it disconnects. It never shows up as a mass storage device. Activesync will catch it momentarily.
I've tried numerous techniques to boot off an SD card or the power-reset combo to access the bootloader but nothing seems to work. Does anyone know of any other mythical techniques that may allow access to this device? I've got the latest firmware upgrade handy. How close it gets to booting makes me feel it's still fixable, I hate calling it a lost cause!
Bricked Roadmate 1212
Just got a new Roadmate 1212 and upgraded it from 3.00 to 3.12. After downloading the update to the unit it rebooted a couple of times in the process of installing the update so your problem may just be a failed update.
The update procedure also stressed not to plug in the unit into the USB before the update install program tells you to do so. If you did this you may need to delete the Windows drivers installed for the unit before attempting the update again. In my case on Vista, when I plugged the unit as prompted by the update, I got one brief message as Vista installed the driver and then the update loaded in about 5 minutes. After then update, Vista reported two drive letters for the unit. The one labeled TFAT was accessible and I was able to browse around and look at files. If you get this far, it may be possible to copy the \SYS files from a good unit and get yours up and running (just a guess).
hi guys,
so i have a serious problem, probably my own fault, but hopefully someone here can help me out!...
so earlier today my phone restarted itself, then when it came back on i lost all funtionality in my SDcard, then lost usb recognition to windows! so after reading all and many failed attempts i decided to use a ruu (RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed.exe) to restore it to hopefully working condition...
so it worked fine, it booted up, sim card was recognized.. but then within a few seconds my network operator is no long working, (works in old phone and my old sim works in this one) .. when i go to network operators, search networks, i click on orange and it just says 'your sim card does not allow connection to this network'
i have a unbranded desire, did i use the wrong ruu?!
any ideas guys?! im going insane here!
* oh and i formatted sd card to fat32, and now that just says unrecognised!
How long you have this phone?
I suspect it may be network barred which it block to use UK network because it has been report lost or stolen the phone IEMI# will be enter in their blacklist.
i have had it 5 months i think, but the sim card i have works in my old phone still?
how would it become barred becuase i returned to what i think is a default ruu?
Not sure, I'm not best person to solve.
Maybe RUU error, because I cannot find Orange RUU in XDA for some reasons.
I can see there is T Mobile, Vodafone etc but no Orange on list.
ok, thanks... i have just noticed something else now...
when connecting my usb to pc, it isnt recognized anymore so i check device manager and it now displays 'qualcomm cdma technologies msm' in other devices!
did the ruu somehow change my phone from gsm to cdma?!
i have tried selecting gsm only in network options but my desire wont let me!
Sound like a USB brick. Try this.
thanks mate,
having trouble though...
i have got to the point of installing terminal emulator but cant issue even the first command.. just says permission denied or directory nonexsistent!
You probably need root, are you rooted again after the ruu? If yes first type "su". If not and unrevoked doesn't work maybe try visionary to temp root.
Sent from my HTC Desire using XDA App
no, i cant root because i cant connect to the pc to use unrevoked... are there always ways to root?
apart from the apk you just suggested which i will try now...
my network signal is now back on, my sdcard is now recognized again thanks to a code i found to use in fast boot...
just need to restore the usb functionality now!
So I have upgraded my i927 captivate glide using the ROM from , but I only Androidupdate com called I927UCLH2_I927ATTLH2_I927UCLH2_Home tar md5 but I get a black screen with a slide down menu saying the date ‘Ongoing’ and an option to change the way that the device connects to another computer.
The update stated pass, it booted and proceeded to tell me that it was updating apps or something like that, then a black screen with the pull down menu from the top of the screen near the usb symbol came up but nothing else. I got a message a few hours later stating that the update application or something like that was not responding and an option to wait or quit. I chose wait, but nothing came of it eventually.
I then proceeded to try reflashing the process with no success even after factory reset and rebooting.
I then tried the pre-release ICS update as per XDA developers and other websites. Same thing
I tried a few other ODIN programs and ROMs but no success. Same issues including the hang up on the Samsung logo. I tried rooting it once and for some reason it started up into what looked like the same pull down menu, but it was requesting that I needed an to input a lock code for the network. I assume that is because my sim card was in it by now, but maybe not. I got so frustrated that I tried the bootloader and update bootloader options using the official ICS update ROM for some stupid reason but nothing. The thing is that at least it booted into the pull down menu that i got with a black screen again.
I then flashed with an updated ICS, CWM6 but cannot do the:
Third: Reboot into CWM6 (Volume- and power) install from sdcard (superuser)
Link to superuser: Superuser-3.2-RC2-arm-signed zip
Forth: Repeat third step above but install keyboard fix.
Link to keyboard fix: CWM_keyboard_backlight_fix zip
since I do not have an SD card that is working. I did get the SD Card in the device but I have always had problems with the format of it and I cannot put the zips onto the card due to the computer Win7 not recognizing it. I tried reformatting the device is HPUSB format program and windows. I inserted the card into the device to hopefully have it recognized on windows, and i gave me an option to format the SD card. So I proceeded and success. I was able to put the Zips onto the card. However, I returned to the CWM6 screen by pressing the VOL- and power keys but the files were no where to be found on the SD Card.
I moved on after a few other tries at it, so I tried to go backwards to the Gingerbread ROM. No success, same hanging issue at the Samsung logo.
I then tried to reflash with the devices original ROM as provided by DroidAngel on androidupdate com. Both without success.
I wanted to try the process involved on the 'stuck on boot screen' thread, but I cannot access the zip files on the sdcard in order to be able to do that.
I also bought my phone unlocked from the US (ATT version) and had it sent to me in Canada unlocked so I cannot just return it to the seller to get a new one, so my new phone is pretty useless.
I have spent two days reading through and trying different fixes and updated ROMs on multiple sites but I just cannot figure out what the heck to do now. I know that this site is not to spoon feed people and I am a noob to all of this but I am out of ideas and cannot find anything else to help out.
Where do I go from here. Is there a possibility of reformatting EVERYTHING on the device including all partitions etc etc.? I mean the hardware is fine, it is just a software issue. I do this to my laptop whenever I get into a bind.
Have you tried booting into CWM and restoring factory?
sent from my captivate glide running ICS (NardROM 0.3 Rooted)
Just a note, the SD card you're seeing in CWMR isn't actually your physical SD card, its the internal phone memory. I don't think we have a version of CWMR that reads the real external SD unless modified. So anything you put on it won't show up there. The folder structure will look like ... /sdcard/external_sd/ where /sdcard/ is where you want to put your files for CMWR to see, /external_sd/ is your physical card you can take in/out.
I have tried to reflash with CWM6 using ODIN v3. I didn't realize that the SD card that came up was actually a part of the internal memory. Thanks to you both for the help.
Any other suggestions since no matter what I do now the phone simply stops at the Samsung logo and wont turn off? I press the power button for the required time to shut it down but it automatically restarts by itself to again sit at the Samsung logo.
EaglesIII said:
I have tried to reflash with CWM6 using ODIN v3. I didn't realize that the SD card that came up was actually a part of the internal memory. Thanks to you both for the help.
Any other suggestions since no matter what I do now the phone simply stops at the Samsung logo and wont turn off? I press the power button for the required time to shut it down but it automatically restarts by itself to again sit at the Samsung logo.
Click to expand...
Click to collapse
A few questions about your situation right now:
Can you get into Download mode? (Turn off the device, in your case remove the battery. Press power en volume UP)
Can you get into CWM? (Turn off the device, in your case remove the battery. Press power en volume DOWN)
Does it keep asking you for the Network Key? Are you stuck at that particular point...?
Evil Alex said:
A few questions about your situation right now:
Can you get into Download mode? (Turn off the device, in your case remove the battery. Press power en volume UP)
Can you get into CWM? (Turn off the device, in your case remove the battery. Press power en volume DOWN)
Does it keep asking you for the Network Key? Are you stuck at that particular point...?
Click to expand...
Click to collapse
Okay, so right now I can still get into the download mode to flash, the CWM6 to factory reset and reboot which I have tried already as stated, and I have not been asked for the network key again since the one time quite a long time ago. The network key is only asked when I load one of the other custom ROMS though, but I have not tried any of those in a while.
I am stuck at the black screen with white Samsung logo.
In CWM6, do you see "mounts and storage" (Second to last option)
If so, connect your phone with the USB cable and select "mounts and storage".
In there and select "mount USB storage" (Again, second to last option, you'll have to scroll to get to it)
Now your PC should see the USB storage which is in fact what is marked as internal SD. So the sdcard CWM can actually see and install things from.
Now you can copy a custom ROM to it, and install it through CWM. Or install anything that is in CWM format.
You may get the Network Key Request as before. I do not know if it can be bypassed by starting it without the SIM. If so, you could then try to unlock your device using one of the methods on the forum.
Alternatively, and highly recommended by yours truly, is to buy the unlock code.
It is somewhat common for these devices to re-lock, so having the code handy is very convenient. I used americanunlocker to get mine, and I put the code on the inside of the back-cover should I find myself re-locked in the middle of nowhere. The code works, and isn't that expensive. In fact, it's a steal if you look at your own time invested in all this in terms of hourly wage! Of course, you'll need the IMEI code. You can find that by removing the back-cover and the battery.
Good luck!
Got it running on Bio360 but 'Not Registered on Network' now
Evil Alex said:
In CWM6, do you see "mounts and storage" (Second to last option)
If so, connect your phone with the USB cable and select "mounts and storage".
In there and select "mount USB storage" (Again, second to last option, you'll have to scroll to get to it)
Now your PC should see the USB storage which is in fact what is marked as internal SD. So the sdcard CWM can actually see and install things from.
Now you can copy a custom ROM to it, and install it through CWM. Or install anything that is in CWM format.
You may get the Network Key Request as before. I do not know if it can be bypassed by starting it without the SIM. If so, you could then try to unlock your device using one of the methods on the forum.
Alternatively, and highly recommended by yours truly, is to buy the unlock code.
It is somewhat common for these devices to re-lock, so having the code handy is very convenient. I used americanunlocker to get mine, and I put the code on the inside of the back-cover should I find myself re-locked in the middle of nowhere. The code works, and isn't that expensive. In fact, it's a steal if you look at your own time invested in all this in terms of hourly wage! Of course, you'll need the IMEI code. You can find that by removing the back-cover and the battery.
Good luck!
Click to expand...
Click to collapse
Thank you so much for the feedback, I actually had not thought about the unlock code idea, and since you put it into such perfect terms considering the time and effort that has to go into something like that, it is a good idea for sure to get one. The idea of keeping it on the inside of the back cover is another awesome idea. Kudos to you and thanks!
As for the rest of what you had stated about the mounting and what not; I actually mounted and successfully reflashed and installed all of the required files for the new ICS stock upgrade. The good news was that I got past the Samsung screen again and it said that it was updating all of the applications or whatever again, but then it just gave me the pull down menu again with very limited functionability.
I then used your suggestion to try out another ROM. I tried the Bio360 and followed all directions on the 'phone stuck on boot screen thread'. It worked! I finally have a functional phone again and will be able to get calls from my boss. Thanks!
Now that I know I have one option, I can explore any other options. I still cannot figure out how it is that I will be able to get the ICS upgrade but maybe I will try Kies.
However, I just found that I don't have network access anymore despite that I have a strong cell signal, so I presume that I will have to enter the unlock code somewhere. Where can I put that into? It didn't pop up to tell me anything.
EaglesIII said:
Thank you so much for the feedback, I actually had not thought about the unlock code idea, and since you put it into such perfect terms considering the time and effort that has to go into something like that, it is a good idea for sure to get one. The idea of keeping it on the inside of the back cover is another awesome idea. Kudos to you and thanks!
As for the rest of what you had stated about the mounting and what not; I actually mounted and successfully reflashed and installed all of the required files for the new ICS stock upgrade. The good news was that I got past the Samsung screen again and it said that it was updating all of the applications or whatever again, but then it just gave me the pull down menu again with very limited functionability.
I then used your suggestion to try out another ROM. I tried the Bio360 and followed all directions on the 'phone stuck on boot screen thread'. It worked! I finally have a functional phone again and will be able to get calls from my boss. Thanks!
Now that I know I have one option, I can explore any other options. I still cannot figure out how it is that I will be able to get the ICS upgrade but maybe I will try Kies.
However, I just found that I don't have network access anymore despite that I have a strong cell signal, so I presume that I will have to enter the unlock code somewhere. Where can I put that into? It didn't pop up to tell me anything.
Click to expand...
Click to collapse
You're very welcome! Glad to hear the phone is usable again. In order to get data back you will have to set your APN manually. Stock ROMs come with the APN settings for all providers it is expected to be sold with. But custom ROMs usually come without those settings. You can find the APN settings for your provider online, just do a search. There is even an app for it, but the name eludes me at the moment. You'll need wifi to get the app, though! Once the settings are in place (You put them in under wireless & Networks), you'll have data again.
As for the limited functionality, I had the same thing, at first. The upgrade was broken for me, I guess some settings/apps were causing problems. So, after flashing the upgrade, I did a factory reset in CWM. I also wiped the cache, and the Dalvik cache, for good measure(Under advanced in CWM). It rebooted, said it was upgrading and installing, and I let it sit for a few minutes. Then I was greeted by an initial setup screen, and the phone has been on a working ICS ever since! I did lose all my settings and such, but I had a back-up of those with Titanium Backup, and got those back that way.
Hope this will help as well.
So i`ve been running back and forth with the issue of not having signal to use for calls and that stuff in my Samsung a225m.And now i ran into a problem with a message popping up everytime i start my phone that states as follow "simcard mode has changed, it changed from single sim to dual sim.To apply this setting restart your phone..." and i restart several times but the message doesnt dissapear and i cant use the cellphone.
I bought this cellphone used and rooted with magisk to a android 11 custom rom, and around the time i bought it, cellphone`s signal lasted a few days before not working.
Now the main issue is the fact that i cant use the phone, but further into it i dont have internet signal.
Note: the last thing i applied to my phone before this error message started to appear, was flashing via Odin (only method used by me) a file to fix efs corrupted taken from @regalstreak.