Related
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Try reading through Dr Kevin's threads again, just to be sure. Re-download the rom you want, from a different source and double check the MD5. Doesn't sound permanent, just a bad flash. Make sure you wipe everything again.
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Dean_M said:
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Click to expand...
Click to collapse
There's a link it here... http://androidromupdate.com/2013/04...much-smoother-android-4-1-2-jelly-bean-build/
Might the same as the Sammobile but if the MD5 checks out, it should be fine.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Dean_M said:
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Click to expand...
Click to collapse
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Dean_M said:
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Click to expand...
Click to collapse
The one file has all the other files like modem,csc in it.. This kind of error usually happens if the data is not wiped out. But as you said you have already done that several times, I don't know what might be the problem..
As you said that you are having unlocked N7100, I hope you downloaded this file http://www.hotfile.com/dl/229498497/9ffa6b9/N7100XXDME6_N7100OXXDME2_BTU.zip.html
Yes thats what i thought that all files were included in the one yes that is the exact one i have on it now i also tried it from different sources just typed *#1234# into the dialler what i have is ap: N7100XXDME6 CP:N7100XXDME4 CSC:N7100XXDME2 ? I appreciate the Help
AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
Dean_M said:
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
jdomadia said:
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
Click to expand...
Click to collapse
Screenshots of both logs
Dean_M said:
Screenshots of both logs
Click to expand...
Click to collapse
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
jdomadia said:
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
Click to expand...
Click to collapse
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
Usually the product code is set when you Factory reset your phone in Recovery mode.. In your case it has not changed.
I checked in the Sammobile for Ireland based roms. But all seems to be carrier branded. So BTU rom should ideally work as it contains EIR CSC
Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
jdomadia said:
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
Click to expand...
Click to collapse
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Dean_M said:
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Click to expand...
Click to collapse
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
jdomadia said:
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
Click to expand...
Click to collapse
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Dean_M said:
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Click to expand...
Click to collapse
Yes Sure someone more knowledgeable can help,you can PM your problem to Dr.Ketan (Search in this forum) he is rely genius.
Look my signature for N7100 toolbox, find PIT and download it
extract to .pit
Flash that PIT for PIT tab of odin (selecting pit will auto select re partition optiuon, keep it selected)
Again repeat but this time along with ROM file (single file ROM also enough). Rom file for PDA and pit file for PIT
Flash and report back.
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
Can you share the ODIN file for 4.1.2? I only have 4.1.1
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
milan guy said:
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
Click to expand...
Click to collapse
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
milan guy said:
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
Click to expand...
Click to collapse
Yea, now I see there is no tar 4.1.2 to go back to. I think since that's the case, I would connect to Kies with a PC and do an emergency firmware recovery. Hopefully that will fix you up.
milan guy said:
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Click to expand...
Click to collapse
Try this you can update to last firmware too.
I searched for this but couldn't find anything which could solve my issue. So here goes...
I have I-9082 while my friend has the L variant, Grand Quattro. He wanted me to help him get Lollipop in there so I..you know...tried. Because, how hard it could be? I was running CM 12.1 without issues!
So this phone was running on 4.1.2 and I was required to first upgrade to a 4.2 bootloader in order to install a custom recovery. I went to sammobile, searched for I9082L and downloaded a Uruguay zip because for some reason there was no 4.2.2 for region India.
While the monstrous zip(tar.md5) was downloading I decide to play around and install a custom recovery. Because why not? So I use the one meant for 4.1.2 using ODIN and BAM! It's a success. No sweat. So I decide to boot into recovery. But for some god forsaken reason, there's no recovery there. Just a BLANK BLACK look.
I then tried to update the phone to 4.2 anyway. Using the Uruguay zip. But no success. Odin just gives up on me after a while and it Fails! In my desperation, I tried the zip for Chile but to no avail.
All I can do now is go into Odin mode somehow after wrestling with the 3 buttons.
Any help would be appreciated. Could I be using the wrong recovery? Or may be the phone, which also goes by I8552, is entirely different! Sammobile has different ROMs for I9082L and I8552, adding to my confusion.
n33raj18 said:
I searched for this but couldn't find anything which could solve my issue. So here goes...
I have I-9082 while my friend has the L variant, Grand Quattro. He wanted me to help him get Lollipop in there so I..you know...tried. Because, how hard it could be? I was running CM 12.1 without issues!
So this phone was running on 4.1.2 and I was required to first upgrade to a 4.2 bootloader in order to install a custom recovery. I went to sammobile, searched for I9082L and downloaded a Uruguay zip because for some reason there was no 4.2.2 for region India.
While the monstrous zip(tar.md5) was downloading I decide to play around and install a custom recovery. Because why not? So I use the one meant for 4.1.2 using ODIN and BAM! It's a success. No sweat. So I decide to boot into recovery. But for some god forsaken reason, there's no recovery there. Just a BLANK BLACK look.
I then tried to update the phone to 4.2 anyway. Using the Uruguay zip. But no success. Odin just gives up on me after a while and it Fails! In my desperation, I tried the zip for Chile but to no avail.
All I can do now is go into Odin mode somehow after wrestling with the 3 buttons.
Any help would be appreciated. Could I be using the wrong recovery? Or may be the phone, which also goes by I8552, is entirely different! Sammobile has different ROMs for I9082L and I8552, adding to my confusion.
Click to expand...
Click to collapse
its almost be different because of model number..
Rommel Espinosa said:
its almost be different because of model number..
Click to expand...
Click to collapse
Can someone please clarify if I8552 and I9082L are in fact entirely different phones.
n33raj18 said:
Can someone please clarify if I8552 and I9082L are in fact entirely different phones.
Click to expand...
Click to collapse
its totally obvious because of model number
Rommel Espinosa said:
its totally obvious because of model number
Click to expand...
Click to collapse
Oh boy...do I feel like a total jackass now.
Apparently both phones are called Galaxy Grand Duos with a different 4th name. Quattro, win, etc.
I still don't know which is which though.
Would flashing I8552 stock 4.1.2 using ODIN solve the problem?
n33raj18 said:
Oh boy...do I feel like a total jackass now.
Apparently both phones are called Galaxy Grand Duos with a different 4th name. Quattro, win, etc.
I still don't know which is which though.
Would flashing I8552 stock 4.1.2 using ODIN solve the problem?
Click to expand...
Click to collapse
if ur phone is i8552 then find a rom that is also for i8552..and if ur phone is i9082 then find a rom that is for i9082..if u flash adifferent rom according to ur model number it may brick ur device
Rommel Espinosa said:
if ur phone is i8552 then find a rom that is also for i8552..and if ur phone is i9082 then find a rom that is for i9082..if u flash adifferent rom according to ur model number it may brick ur device
Click to expand...
Click to collapse
Well it's I8552. And all this time I thought it was just a variant of I9082 and also called I9082L. Now it looks like they are both different phones.
Damn Samsung putting out a million similar phones.
n33raj18 said:
Well it's I8552. And all this time I thought it was just a variant of I9082 and also called I9082L. Now it looks like they are both different phones.
Damn Samsung putting out a million similar phones.
Click to expand...
Click to collapse
before u hate samsung just read a few things about ur model number bro
Rommel Espinosa said:
before u hate samsung just read a few things about ur model number bro
Click to expand...
Click to collapse
Well yea I agree.
It was my own fault.
Thanks for your help!:laugh:
Hi ,
i have tryed many times now to update my device from at&t sgh-i317 (4.1.2) to recent android (4.4.. minimum) whitout succes, i had always te null imei and worked 2 days to get it back whitout backup....
flashed twrc result now always in null imei, if i want it back, the only way is flash in odin the only working stock rom KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar
Strange thing was that i was on 4.4.2 branded as gt-n7100 and now it's at&t sgh-i317 (but i get back imei and baseband)?!?!
I have help many guys in the past but now i need help as i can't find a solution and really want to update!
can someone good help me step by step please?
THX in advance guys
If rom branding is showing n7100...you are flashing the wrong builds...
N7100 roms are not compatible with the SGH-I317...g
gregsarg said:
If rom branding is showing n7100...you are flashing the wrong builds...
N7100 roms are not compatible with the SGH-I317...g
Click to expand...
Click to collapse
yes ive seen it and can't understand it, i was sure it was n7100 before? im also from belgium and by this in a belgian store wich is not at&t....so now you think is a do it again with the good files it wil work? is there any specific recovery then i need for my model? thx mate...
also can i flash it back to gt-n7100 please??? someone can try to find a solution with me?
If your device is N7100...then yes...you can use the stock N7100 rom to repair the device..
Regarding the recovery...you can use TWRP latest version for the N7100 device.
Files can be found in that section on xda...g
gregsarg said:
If your device is N7100...then yes...you can use the stock N7100 rom to repair the device..
Regarding the recovery...you can use TWRP latest version for the N7100 device.
Files can be found in that section on xda...g
Click to expand...
Click to collapse
ok i will try that again, thx for help i come back tomorrow to report when it's done or not...
wait a minute, ive seen now that the imei is changed also,how is this possible??? that's why the brand as change to at&t.... from 7100!
i hope it's possible to get it back to stock with original imei? is someone able to help me out or te redirect me to someone that can help me out please? thx
just for info my imei as now /5 at the end?!
Finaly i get it updated and working on 4.4.2
the imei as changed again to another one but not matched with original....but it's working.
im stil on at&t but happy to have it on 4.4.2 working.
now if its possible to fix the imei or eventualy get it back branded as 7100...i take it?
i have installed dn4 2.4 rom finally to be quit of the at&t sh**
it is al working well so i leave it as it is for now.
the solution for me was reinstall stock rom (odin) , update stock rom to 4.4.2 (odin) then install recovery (odin), install new custom rom (twrp), new bootloader (odin) et voila!...gregsarg thx for help.
for a community as this i was thinking that more poeple should help....like we did in the past
Hello,
I'm trying to look for the fresh stock rom of SGH-I317 rom so I can flash my phone back to normal. I owned this phone since 2012, I had it rooted and everything else. Last night, it decided to do something funny and now it gets stuck on samsung logo/battery and I can only access download mode for the time being.
So I assume I have to factory set everything and lose data--which i don't care about anymore.
Can anyone please help? Thank you. Stock rom is what I need and Odin as well. Thanks again =)
Adam.
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
toshik1 said:
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
Click to expand...
Click to collapse
Thanks replying. Unfortunately.. I tried getting into recovery mode but it just won't let me. when I do that.. it only takes me back to the samsung logo. I really really don't know why...
Right now I only have access to the Odin Mode and it comes up as
Product Name :
Custom Binary Download : No
Current Binary Samsung Official
System Status : Custom
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
dssheeley1 said:
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
Click to expand...
Click to collapse
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
beatsme2 said:
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
Click to expand...
Click to collapse
Try samsung firmware n get rom that way...then reroot
dssheeley1 said:
Try samsung firmware n get rom that way...then reroot
Click to expand...
Click to collapse
Amigo...
Whereeeeeeeee..... u__u;
beatsme2 said:
Amigo...
Whereeeeeeeee..... u__u;
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
With the phone in download mode, is there anything on the phone about knox or warranty bit? If there is, the phone can't be flashed with any stock ROM from sammobile.com.
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread.
Click to expand...
Click to collapse
REALLY??? Please show us the link for upgrade! As I said there is no OEM 4.3 ROM at sammobile
I was told many many times that AT&T (and this is the one we are talking about) 4.4.2 ROM can not be downgraded!
I tired the downgrade and yes the system will go down to 4.1.1 but it would keep the 4.4.2 bootloader so the phone won't charge while being off (making it pretty useless).
@audit13 : I've the phone since 2012. I think Im getting a new as is but I know this phone can't be done just yet. if I'm able to access download mode that should warrant itself the possibility of it being fixed. Just need that thread to follow those directions =)
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
Click to expand...
Click to collapse
Good Morning, thanks for the link.. But I'm already lost at which one I'm supposed to pick. Can you provide a link to that thread, please? Thank you
Adam
OMG, my bad.
Does the phone say anything about warranty bit or knox in download? If it does, the phone can't be flashed with any ROMs from sammobile.com.
my phone is SGH-I317 NOTE 2 .....
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
audit13 said:
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
Click to expand...
Click to collapse
Hi. This is all i have on the download section
http://imgur.com/a/zYql8
Maybe I'm missing something extra like the videos i've seen ?
What is the model number on the label under the battery? Something is very wrong because there is no model number.
audit13 said:
What is the model number on the label under the battery? Something is very wrong because there is no model number.
Click to expand...
Click to collapse
Well the model number SGH-I317 . I'm sure I mentioned it before. And yes. .I find that to be weird too >__<.. What am I missing?
In this case, I would try and flash the stock ROM from sammobile.com in Odin: https://www.sammobile.com/firmwares/database/SGH-I317/
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection
sorry for double posting but here's a reminder
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection