Sometime happen that touch screen misses quick tap like for write words with double or when i play some games. It happen in most cases near the edges of the screen (like p, l letter of keyboard). Does it happen to you too? Is it possible is it related to protective tempered glass screen protector?
Sometime, just misses single taps too...
While it's charging? If not then it's probably your screen protector.
bblzd said:
While it's charging? If not then it's probably your screen protector.
Click to expand...
Click to collapse
No, even if is not charging
Related
I got a used touch pro 2, and the previous owner seems to have placed a rubbery type screen protector (zagg?? I don't know)...does this affect the zoombar, as it covers the entire screen from above the earpiece to below the 4 buttons?
telegraph0000 said:
I got a used touch pro 2, and the previous owner seems to have placed a rubbery type screen protector (zagg?? I don't know)...does this affect the zoombar, as it covers the entire screen from above the earpiece to below the 4 buttons?
Click to expand...
Click to collapse
I have a no-name screen protector on mine, but it seems to be better-than-decent quality (slick and strong, in addition to being rather thick).
It covers the whole front of the phone (zoombar included), and doesn't seem to affect it's sensitivity at all, it actually reacts differently to fairly minor variances in pressure and placement of my finger.
Does anyone have a rubbery type of screen protector on their phone? And if so, has.it affected your zoombar? Mine doesn't seem to work,.and.I'd hate to take off the current screen protector just to check to see if it's working...
telegraph0000 said:
Does anyone have a rubbery type of screen protector on their phone? And if so, has.it affected your zoombar? Mine doesn't seem to work,.and.I'd hate to take off the current screen protector just to check to see if it's working...
Click to expand...
Click to collapse
I use Best Skin Ever, and no difference between the twitchy zoom bar before and after.
Now that it's hot here in the UK, whenever I try to text with sweaty hands, my keyboard goes all spazzy and starts pressing buttons without me touching them, somethings even on the other side of the screen where I'm touching, and since I use Kik messenger almost all day, it's a bit of a problem.
Is there any way I can stop this from happening? Maybe a certain screen protector or something?
The Alpha Gamer said:
Now that it's hot here in the UK, whenever I try to text with sweaty hands, my keyboard goes all spazzy and starts pressing buttons without me touching them, somethings even on the other side of the screen where I'm touching, and since I use Kik messenger almost all day, it's a bit of a problem.
Is there any way I can stop this from happening? Maybe a certain screen protector or something?
Click to expand...
Click to collapse
did you remove the anti shatter protector? If so buy a good quality screen protector like invisible shield etc.
Sent from my Xperia Play using Tapatalk 2
fma965 said:
did you remove the anti shatter protector?
Click to expand...
Click to collapse
No I still have the anti shatter one on
the anti shatter cover istn't the best. if you really want to type well you have to remove it and put on an other good one (look on ebay there are many)
Would this one help? http://www.argos.co.uk/static/Produ...9|Mobile+phone+screen+protectors|30213063.htm
I checked the Q&A section beforehand to see if anyone else was having similar issues, but didn't see any similar threads.
The Problem:
Sometimes, when pressing the back button (and to a much smaller extent, the home and recent apps) it double taps. For example, pressing back to go back a page in Chrome will result in it going back 2 pages. This double tapping behavior.happens with all the keys, but is most noticeable with the back button due to how often it is used.
Possible Causes:
I suspect that the current screen protector may be causing issues with the buttons. I am fairly certain I have seen this issue before in other devices that used capacitive buttons. I'm currently using a glass screen protector that covers the entire face of the phone. As it stands right now, I value the protection of the screen protector enough to keep it on despite the potential issue it may cause.
It is possible that the buttons themselves are defective, but hopefully that is not the case.
Other Observations:
If I take my finger and slide it onto a certain part of each button, it causes the button to be pressed rapidly without having to lift my finger. Also, I can sometimes overload the buttons, to the point that the backlight of the buttons turns off and they become unresponsive for a few seconds.
The Questions:
Has anyone else noticed similar behaviors with this phone?
Can any users with and without glass screen protectors test out the spazzing button glitch?
Thanks! :good:
I have the same issue with the buttons.
Sometimes, when press any buttons, it detects two or more pulsations.
I have tempered glass screen protector.
I have no protector and do not have this issue.
jonasiesta said:
I have the same issue with the buttons.
Sometimes, when press any buttons, it detects two or more pulsations.
I have tempered glass screen protector.
Click to expand...
Click to collapse
Thanks for the reply. Which brand are you using? I picked up the Sparin brand from Amazon.
wshek said:
I have no protector and do not have this issue.
Click to expand...
Click to collapse
Thanks for the reply. It does raise the suspicion that it's a screen protector problem.
I have this one
Screen Protector in Amazon
I have the same issue and I have a tempered glass screen protector.
using tempered glass screen protector but no this kind issues
jonasiesta said:
I have the same issue with the buttons.
Sometimes, when press any buttons, it detects two or more pulsations.
I have tempered glass screen protector.
Click to expand...
Click to collapse
My S4 Mini is going mad,some invisible creatures are walking on my screen :silly:
The digitizer is seeing ghost touch
Installing a touch screen test application show that ghost touches appear regularly in the upper part of the screen
Is there some way to fix (or highly reduce) these ghost touches without changing the whole screen ?
For me it was random when it happens.
After a few weeks it looks to be gone again.
Foo Bar said:
My S4 Mini is going mad,some invisible creatures are walking on my screen :silly:
The digitizer is seeing ghost touch
Installing a touch screen test application show that ghost touches appear regularly in the upper part of the screen
Is there some way to fix (or highly reduce) these ghost touches without changing the whole screen ?
Click to expand...
Click to collapse
any visible damage or dirt? Moisture? Bad connection of ribbon cables or poor grounding of screen can cause
IronRoo said:
any visible damage or dirt? Moisture? Bad connection of ribbon cables or poor grounding of screen can cause
Click to expand...
Click to collapse
The phone has not felt for months nor been exposed to special dirt (only skin grease)
I haven't dare unscrewing the phone to access the motherboard
Meanwhile I've put a screen protector to see if skin grease was the reason of that behavior .. will see
Hi all,
We all know how hard it is to find a good Tempered glass for a smartphone with curving edge display,
That also the case with our Pixel 2 XL
Luckily, finally i managed to found tempered glass that has full adhesive, case friendly, and doesn't break our bank account, :laugh:
Here's the product : Tempered Glass for Google Pixel 2XL Screen Protector FULL GLUE Case Friendly Premium Screen Glass Protector For Google Pixel2XL
http://s.aliexpress.com/qqYVbYFZ?fromSns=Copy to Clipboard
(from AliExpress Android)
Price : $11.77 include free shipping,
It took week till it arrive to my door. Item shipped from Hongkong, am living in Indonesia
Packaging : its good and safe. Tempered glass placed inside a sterofoam box .
Installation : Now, this is the tricky part, although it has full adhesive, the installation wont go as simple as installing other (ex iPhone) full adhesive TG. It (the adhesive) tends to spread unevenly causing bubble.
The trick is to go from the corner, while keep the other corner floating, press the glass with two or more finger ensuring no bubble appear in the process.
It will take sometimes till you get it right with zero bubble,
But the result is rewarding. It perfectly fit, and can be used with cases as well. I use it with original google fabric case.
Check some pictures bellow :
Pictures with screen on and on a straight angle?
scottjal said:
Pictures with screen on and on a straight angle?
Click to expand...
Click to collapse
Like this ?
scottjal said:
Pictures with screen on and on a straight angle?
Click to expand...
Click to collapse
Sorry, forgot to turn off the portrait mode
Yes. Doesn't look like it cuts off the edges too badly. What I was waiting on but not sure I want to deal with Ali.
scottjal said:
Yes. Doesn't look like it cuts off the edges too badly. What I was waiting on but not sure I want to deal with Ali.
Click to expand...
Click to collapse
It was quite gambling for me as well, lol,
But since i have no other option available in my country, u guess i have nothing to lose for 12 bucks.
Now am waiting a case to arrive
Looks good. I just don't understand why they make the top and bottom black instead of clear if it is full adhesive.
I'm guessing this is the same product as HeroShield. Looks the same. My HeroShield should arrive in a few weeks, so we'll see.
Does it have a cut out for the proximity sensor? I don't mean just a transparent window, proper gap/no glass bit over the sensor. I can't see from the photos
how is the screen feel and oleophobic coating? Does the finger glide eaily on the screen?
kyacrash said:
Looks good. I just don't understand why they make the top and bottom black instead of clear if it is full adhesive.
Click to expand...
Click to collapse
Its because although the adhesive on the display area is full, there's lil gap on the edge area where it doesn't have the adhesive, i guess due to the curve, it still not possible to create fully transparent glass protector with full adhesive. I never seen one for popular phone like iphone either. All iphone x glass protector has coloring as well.
The only real transparent protector with full adhesive is whitestone probably, but thats using low viscosity loca to begin with, so its different story, not to mention the skyhigh price.
mkouk said:
Does it have a cut out for the proximity sensor? I don't mean just a transparent window, proper gap/no glass bit over the sensor. I can't see from the photos
Click to expand...
Click to collapse
It doesn't. It have a transparent window with adhesive under . It stick perfectly though, thus no interference to the proximity function. I try make a call and place finger over the sensor, it work normally
Mikulec said:
how is the screen feel and oleophobic coating? Does the finger glide eaily on the screen?
Click to expand...
Click to collapse
Nothing extraordinary regarding the coating i guess. Finger glide nicely just like on original screen. But it collecting fingerprint overtime. (Am one of those guy who have wet hand all the time though, so my experience with fingerprint might be severe than how it should) :silly:
ordered! hope it will arrive soon!
btw do you have to tear it out to re position it when you are applying on the screen?
bradputt said:
ordered! hope it will arrive soon!
btw do you have to tear it out to re position it when you are applying on the screen?
Click to expand...
Click to collapse
You need to lift it off if you already stick large area of it prior to reposition,
Positioning is quite easy though, the harder part is to push the glass slow and even.
I'd almost be interested, but I try to stay away from protectors that cover the proximity sensor. I know it works sometimes, I've just been bitten by it too many times on phones where it causes issues.
Here's HeroShield's install video. Seems like they include a squeegee with theirs to help with the bubbles.
Mine comes today, so I'll see what it's like too.
ilal2ielli said:
Here's HeroShield's install video. Seems like they include a squeegee with theirs to help with the bubbles.
Mine comes today, so I'll see what it's like too.
Click to expand...
Click to collapse
These look interesting. I am with the previous poster about the prox sensor cut out. Please share your experience when you get it.
kiru said:
These look interesting. I am with the previous poster about the prox sensor cut out. Please share your experience when you get it.
Click to expand...
Click to collapse
Can see from the video that it has glass covering the sensor, so it will be hit or miss. Some will have no issues with the sensor. Others will.
Mine will be here in a few weeks, so I'll see then too.
Hi OP... Are you able to post some picts of the top and bottom edge of the phone? Or a pict that can somehow show the gap of the side of the protector to where it meets the screen. Just curious to see if there is a slight gap as there is no adhesive there. Since I go case less, I am afraid I will always crack the glass because of this gap. Thanks in advance!
Something like this ?
Those picts are good!!! thanks!!!