Related
I moved from an HD2 to the Evo this week (no more TMobile, woot!). I am very familiar with custom WMO ROMS, Hard SPL, blah blah...
I have nearly zero Android development, custom ROM knowledge, etc, however.
I'd like to flash a custom ROM based on the factory, without all the Sprint programs preloaded.
Clearly I need to root; I am on steady ground with that knowledge. After that? Not so clear. There doesn't seem to be a thread with the steps I need to proceed.
Any info would be invaluable, thanks!
(PS - side question: why does Android launch all sort of processes in the background seemingly at random?)
ifiweresolucky said:
I moved from an HD2 to the Evo this week (no more TMobile, woot!). I am very familiar with custom WMO ROMS, Hard SPL, blah blah...
I have nearly zero Android development, custom ROM knowledge, etc, however.
I'd like to flash a custom ROM based on the factory, without all the Sprint programs preloaded.
Clearly I need to root; I am on steady ground with that knowledge. After that? Not so clear. There doesn't seem to be a thread with the steps I need to proceed.
Any info would be invaluable, thanks!
(PS - side question: why does Android launch all sort of processes in the background seemingly at random?)
Click to expand...
Click to collapse
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Jus10o said:
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Click to expand...
Click to collapse
any reason adb remount isn't working for me? I do adb devices and my devices is there but when i type adb remount i get "remount faild: Invalid argument"
I started Toasts root directions, placing PC36IMG.zip on the base directory of the SD card. Shut down, loaded with the Vol Down and Power buttons. The bootloader checked the file on the SD card but then stopped on the white screen.
It seems it was supposed to proceed automatically? But I am dropped off with options on the white screen: FASTBOOT, RECOVERY, CLEAR STORAGE, SIMLOCK, and HBOOT USB.
Directions show Vol Up and Down for previous and next and Power for select.
Alright, I resolved this issue. I recopied the file to the SD card and made sure to eject drive before shutting the device down. Seemed to make all the difference! Proceeding with the remainder of Toast's directions now...
p-slim said:
any reason adb remount isn't working for me? I do adb devices and my devices is there but when i type adb remount i get "remount faild: Invalid argument"
Click to expand...
Click to collapse
I'm running in to the same issue...
rgordon3091 said:
I'm running in to the same issue...
Click to expand...
Click to collapse
i fixed it. you have to do this.
adb shell
mount /dev/block/mtdblock4 /system
cd /system/app
ls
Getting error trying to remove nascar..
Code:
rm Sprint_NASCAR.apk
rm failed for Sprint_NASCAR.apk, Directory not empty
Any ideas?
That's Linux trying to protect you. Essentially the rm command by default just removes one file at a time.
Try...
rm -r NameOfFolder
...to delete recursively.
Sent from my EVO 4G using Tapatalk
Go see the thread in the apps sub-forum about this. I have a post (#28, I believe) with the exact code to remove the bloatware. You can just copy any paste.
-------------
Sent from my HTC EVO 4G using Tapatalk Pro.
nick325i said:
Getting error trying to remove nascar..
Code:
rm Sprint_NASCAR.apk
rm failed for Sprint_NASCAR.apk, Directory not empty
Any ideas?
Click to expand...
Click to collapse
you shouldn't have a problem deleting the apk, because an apk is not a directory.
i deleted it without the same message.
p-slim said:
i fixed it. you have to do this.
adb shell
mount /dev/block/mtdblock4 /system
cd /system/app
ls
Click to expand...
Click to collapse
'
hmmm i put im adb shell then i got a "#" so i put in "mount /dev/block/mtdblock4 /system"
and i got mount:mounting /dev/block/mtdblock4 /system failed: No such file or directory
so what did i do wrong?
Found the issue. Thanks all
Jus10o said:
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Click to expand...
Click to collapse
By the way, when I "cd /system/app" and then "ls" I see only NamesOfApps.apk. There are displayed no *.odex files. Is that normal?
thread dead?
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
scottspa74 said:
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
Click to expand...
Click to collapse
I was just about to say something similar. I had uninstalled Nascar using Titanium Backup, and the found out that I cant do the 2.2 OTA unless its there. TB didn't have the ability to restore it for some reason, so I got an APK from XDA, and put it in the system/app folder via Root Explorer. Then, I had to reset the permissions to match the other APK's, and it showed up and launched perfectly. Even did an update. Much easier than all that adb stuff, I think.
I used system app uninstaller for a buck on the market.. Easy and all there with the icons for easy to find and delete sprint and gapps.
Sent from my PC36100 using XDA App
scottspa74 said:
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
Click to expand...
Click to collapse
Thats a good way.. If something goes wrong just have to rename.
Sent from my PC36100 using XDA App
Flash this zip and it should remove most of the Sprint apps. It will back them up to /sdx on your SD card so if anything is removed that you want, it will still be there. It's signed to work with RA.
http://grathwohl.me/uploads/android/evo/Sprint-Apps-Remover-signed.zip
I've seen a few people reference my post, but my post was really just trying to ask if anyone knew if, now that I've renamed them, and they don't run, they shouldn't be using up resources? Right, is that correct, or am I wrong in thinkin this?
And thanks cosine83, that's a really helpful post for a lot of people.
Is it possible to change it using root or adb please?
Why would you want to?
Nope. Impossible
NeoTechni said:
Why would you want to?
Click to expand...
Click to collapse
just wanted to clone my wife's one for the hands free in the car to avoid having to switch through the menu in the car.
I was unable to locate /pds as per http://pocketnow.com/tweaks-hacks/motorola-atrix-4g-how-to-change-wi-fi-and-bt-mac from http://forum.xda-developers.com/showthread.php?t=992326. I suspect every phone maker puts Bluetooth address where they wish...
However I was able to locate a zero byte bt_mac_addr file with no extension in /proc folder. It is empty both when bluetooth is on and off.
I hope someone more technically skilled than me can figure out if it can be populated to change the bluetooth address succesfully.
Thanks in advance
I looked at the '/proc/bt_mac_addr' file again using root explorer this time and can see my bluetooth mad address in it and could edit the address and change permissions to it but the modifications don't stay saved even after reboot though the root explorer says changes saved successfully. Can someone help me modifying the file please.
I'm on rooted 2.3.3
/proc is a virtual Filesystem provided by the Linux Kernel. The changes you made there won't persist a reboot cause it only gets saved in Ram.
Thank you. Does it mean I need a script of some type? Is it possible to achieve a change some other way? The pocketnow article seems to do it for the motorola phone but by modifying text file in another folder which I cannot find.
I followed the same process as follows using below commands
C:\Program Files\Android\android-sdk\platform-tools>adb push C:\APK\bt_mac_addr /sdcard/download/bt_mac_addr
1 KB/s (18 bytes in 0.015s)
C:\Program Files\Android\android-sdk\platform-tools>adb shell
$ su
su
# cp /sdcard/download/bt_mac_addr /proc/bt_mac_addr
cp /sdcard/download/bt_mac_addr /proc/bt_mac_addr
cp: can't create '/proc/bt_mac_addr': File exists
Is there another file I can change for it maybe?
Thanks again for all the help.
If you really want to do it then you can (On stock rom) use the same trick that is used for adb remount (Put an echo whatever into into /etc/install-recovery.sh)
You need to make sure it runs as root as well
Have a play around.
Installing the insecure adb apk (From Paul Modaco).
and
adding to the end.
/system/xbin/echo 8D:64:22:01:E2:A9 > /proc/bt_mac_addr
looks like it should work.
(If you have an unlocked bootloader then you can just do it from init.semc.rc in the initramfs)
Or you can look at the method (I posted the manual method in the rooting/insecure adb thread).
This presumes that this is actually working (Its possible you might have to restart a service to actually change it).
just make a simple init.d script
Thank you both. I Will look at it when i'm at the pc. A bit scared having never done anything similar. I Appreciate your guidance very much
Sent from my R800i
Thanks again for your previous replies. I tried "/system/xbin/echo 00:01:02:03:04:05 > /proc/bt_mac_addr" using script manager with superuser permissions granted and running in root mode but it gives the following error: "echo: write error: Input/output error". Same problem in gscript unfortunately.
Would you please tell me what this means and kindly suggest what I should do. I have not figured out yet how to do adb insecure or init.d but hope you could suggest the best way after seeing the above error.
Thanks in advance
ps3taker said:
Thanks again for your previous replies. I tried "/system/xbin/echo 00:01:02:03:04:05 > /proc/bt_mac_addr" using script manager with superuser permissions granted and running in root mode but it gives the following error: "echo: write error: Input/output error". Same problem in gscript unfortunately.
Would you please tell me what this means and kindly suggest what I should do.
Thanks in advance
Click to expand...
Click to collapse
You probably have to remount /system writable
Atarii said:
You probably have to remount /system writable
Click to expand...
Click to collapse
Thank you - I tried this but still same error
ps3taker said:
Thank you - I tried this but still same error
Click to expand...
Click to collapse
try this:
Code:
echo "00:01:02:03:04:05" > /proc/bt_mac_addr
DooMLoRD said:
try this:
Code:
echo "00:01:02:03:04:05" > /proc/bt_mac_addr
Click to expand...
Click to collapse
Thanks - I tried this but it still gives the same input/output error unfortunatelly
Besides mounting system as rw via script manager option I also enabled run at boot, run on network change, run as root but still no change before and after reboot.
I hope you could think of something please. Maybe /proc folder needs to be mounted rw but i'm not sure how or if it is not rw already - root explorer has no problem openning it rw straight away...
Thanks again for everybody's help in advance
ps3taker said:
Thanks - I tried this but it still gives the same input/output error unfortunatelly
Besides mounting system as rw via script manager option I also enabled run at boot, run on network change, run as root but still no change before and after reboot.
I hope you could think of something please. Maybe /proc folder needs to be mounted rw but i'm not sure how or if it is not rw already - root explorer has no problem openning it rw straight away...
Thanks again for everybody's help in advance
Click to expand...
Click to collapse
It won't work as that interface is read only
Sent from my R800i using XDA App
Thanks for trying to help.
I wonder if there is another file somewhere. Any idea what Play's equivalent of Motorola's Atrix 4G folder called "/pds" is - as it it seems to work for them: http://pocketnow.com/tweaks-hacks/motorola-atrix-4g-how-to-change-wi-fi-and-bt-mac
Thanks again for all the help - it was exiting to try scripts and other things you pointed me to.
Hi everybody,
Sorry for my bad english, i'm italian,
I've a problem with my a100 with stock ics. yesterday i've rooted it and i've installed lcd density modder. now, i've do a mistake and saved the dpi instead of temp apply. after the reboot the home won't start cause it freeze. i can only have access to settings i can't access the lcd density app. i've tried to reset to factory but it's still the same. Can anyone help me ?
thanks
Use adb to pull build.prop from /system use some text editor to open it and find this line ro.sf.lcd_density= and change it to ro.sf.lcd_density=160 then reboot.
The exact commands are :
Code:
adb pull /system/build.prop build.prop
adb push build.prop /system/build.prop
adb shell reboot
thank you so much, resolved
can you explain how to pull it up into the text editor i'm afraid i have the same problem and found this thread i enter the pull command and recieve this in cmd prompt:
C:\Users\Owner>adb pull /system/build.prop build.prop
224 KB/s (1841 bytes in 0.008s)
and now i'm lost.....
ilovemywife269 said:
can you explain how to pull it up into the text editor i'm afraid i have the same problem and found this thread i enter the pull command and recieve this in cmd prompt:
C:\Users\Owner>adb pull /system/build.prop build.prop
224 KB/s (1841 bytes in 0.008s)
and now i'm lost.....
Click to expand...
Click to collapse
Open your editor and then open build.prop in it.
Or name it build.txt then edit it then save as build.prop.
Tapatalked from my Galaxy S II.
pio_masaki said:
Open your editor and then open build.prop in it.
Or name it build.txt then edit it then save as build.prop.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
i'm a noob here i need more details on how exactly i should go about getting it opened
ilovemywife269 said:
i'm a noob here i need more details on how exactly i should go about getting it opened
Click to expand...
Click to collapse
Open whatever editor you want, then click on help for how to open documents in that program.
Otherwise, file>open>whereveryousavedit/build.prop
Then file>save.
Edit: for windows I suggest notepad++
Tapatalked from my Galaxy S II.
pio_masaki said:
Open whatever editor you want, then click on help for how to open documents in that program.
Otherwise, file>open>whereveryousavedit/build.prop
Then file>save.
Edit: for windows I suggest notepad++
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
ok i didn't save it anywhere how do i save it?
ilovemywife269 said:
ok i didn't save it anywhere how do i save it?
Click to expand...
Click to collapse
C:\Users\owner\build.prop from what you posted before.
Tapatalked from my Galaxy S II.
pio_masaki said:
C:\Users\owner\build.prop from what you posted before.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
ok now i get:
C:Users\Owner>adb push build.prop /system/build.prop
failed to copy 'build.prop' to '/system/build.prop' : Read-only file system
what am i doing wrong shouldn't it be in a Read-Write system?
ilovemywife269 said:
what am i doing wrong shouldn't it be in a Read-Write system?
Click to expand...
Click to collapse
adb remount
adb push build.prop /system/build.prop
Edit: if that fails try this:
adb shell mount -o remount,rw -t ext4 /dev/block/mmcblk0p3 /system
mount: permission denied (are you root?)
i was rooted before i factory reset i went through the adb root method which is basicaly how i achieved root to begin with except i used a cmd prompt terminal app and did it all on my tablet and now i'm not sure i never had a "full" root idk how to explain that but it told me i was rooted and could run root apps and such but it still limited me on a few things if this helps i have
"bootloader 0.03.06-ics (unlocked)"
it came stock with gb or honeycomb i had to find a .zip file to get ics
now i've tried to adb root again and failed i'm not sure why...
ilovemywife269 said:
mount: permission denied (are you root?)
i was rooted before i factory reset i went through the adb root method which is basicaly how i achieved root to begin with except i used a cmd prompt terminal app and did it all on my tablet and now i'm not sure i never had a "full" root idk how to explain that but it told me i was rooted and could run root apps and such but it still limited me on a few things if this helps i have
"bootloader 0.03.06-ics (unlocked)"
it came stock with gb or honeycomb i had to find a .zip file to get ics
now i've tried to adb root again and failed i'm not sure why...
Click to expand...
Click to collapse
OK time for info then. What ROM are you on? What recovery? Why did you use a method other then one intended for the a100? Being rooted but limited is probably due to missing or bad busy box installation.
Tapatalked from my A100 - Kuroikaze B3
i used an update zip for what i believed to be a stock ics rom and i rooted with a method that was intended for the a100:
Download the su binary from here.
Hook your device to the computer via USB cable.
Copy the su binary file to /mnt/sdcard/ on your tablet.
Open a command prompt on your Windows computer.
Change directory to where ADB is located. (This is usually the /tools or /platform-tools directory inside the Android SDK installation directory.)
Type in the following commands at the terminal (press Enter after each command):
adb shell /system/bin/cmdclient ec_micswitch ‘`mount -o remount,rw /system`’
adb shell /system/bin/cmdclient ec_micswitch ‘`cat /mnt/sdcard/su >/system/xbin/su`’
adb shell /system/bin/cmdclient ec_micswitch ‘`chmod 6755 /system/xbin/su`’
Install the Superuser app from the Android Market.
i used this method but i used terminal emulator on my tablet i didn't use adb
here is the update zip i used for ics- this is the error i get trying to attach the zip file:
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Use the script as intended. From the PC. If you go running them on the tab itself you may have missed one somewhere.
You can't attach a file that large to a post.
Tapatalked from my Galaxy S II.
when i enter the first shell command it denies me and asks me if i am root......
ilovemywife269 said:
when i enter the first shell command it denies me and asks me if i am root......
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=23285307
Use this method.
Tapatalked from my Galaxy S II.
i tried both ics rooting methods both of which told me they achieved root however i am still denied permission to remount
with my moto phones i've always been able to flash back to stock.....or flash back to life anyways is there a way to flash this tablet?
After rooting my Galaxy Nexus with Wug's Root Toolkit and sim unlocking with the Docomo hack, and then restoring my apps/data (can't recall if I restored from GN Toolkit or Root Toolkit), my camera app was messed up--could snap pix but they didn't save; and video always fc'ed. The solution turns out to be to rename or delete the DCIM folder. I couldn't delete--so I renamed. Now I am trying to delete that DCIM.old folder and contents (eating up 1+G on my storage), but cannot delete either individual files or the folder. I'm sure there is a simple solution, but I can't find it. Help (even with a condescending attitude ) much appreciated!
zzcat
If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick
You could also try the following Apps:
- Rootexplorer (paid)
- Astro File Manager
familyguy59 said:
If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick
Click to expand...
Click to collapse
FamilyGuy, thanks for the suggestion, the problem seems to be bad permissions and I can't figure out how to fix them. Tried the "fix permissions" from recovery, as well as when booted, to no avail.
Typing
adb shell rm -rf /[directory]
gives me "permission denied"
So tried
chmod 666 /sdcard/.../*
but get an "operation not permitted" message.
So I'm really stuck here...
familyguy59 said:
If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick
Click to expand...
Click to collapse
Update: solved
boot into recovery mode
mount /data
adb shell
rm, rmdir etc. all work as expected from here, no need to chown or chmod anything
zz
I see you've solved this, but i thought i would throw this in anyway...
The easy way is to delete the files from /data/media
The sdcard directory is a symlink, so go to the true folder and you should have more success...
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
Thanks for this and other suggestions--my solution was trial and error, thrashing around in the dark (my unix command line chops are really, really rusty), and these are far more elegant. It's good to understand the underlying problem, your wisdom is appreciated.
Yes, permissions were messed up after rooting and applying a sim unlock hack, wiping and restoring from pre-unlock backup set. I see it so clearly now...
Problem can somebody help me?
Hello. I have a problem with my motorola defy+ running on gb 2.3.6 and is not ROOTED. Still he has an annoyng problem. After installing an aplication (not from the market) i saw that it didn't save data on the sd card. I uninstalled it and after a data factory reset i install apps such as temple run and Brother in Arms 2. At temple run it gave me this mesage
"File Access Problem Caution, unable to write files. This means your game progress can't be saved! Reason: Access to the path "/mnt/sdcard/Android/data/com.imangi.templerun/files/spaceholder.dat" is denied."
Also at Brother in Arms 2 the game didn't save. I rest the phone abouat 7-8 times.I changed the sd card. Note that the card was a 16 gb kingmax class 6 and put the 2 gb card that came with the phone. It all work smoothly. So what is the problem the sd card or the phone's software. Please answer i'm desparate and tired of wasting time.
This thread is about the Samsung Galaxy Nexus which has no external SD and uses a very different storage structure. I'm afraid we can't really help you here. Try the Defy forum.
Sent from my Galaxy Nexus using Tapatalk 2
zzcat said:
FamilyGuy, thanks for the suggestion, the problem seems to be bad permissions and I can't figure out how to fix them. Tried the "fix permissions" from recovery, as well as when booted, to no avail.
Typing
adb shell rm -rf /[directory]
gives me "permission denied"
So tried
chmod 666 /sdcard/.../*
but get an "operation not permitted" message.
So I'm really stuck here...
Click to expand...
Click to collapse
Before chmod the folder, you needed to be root by entering 'su' after 'adb shell' .
It worked from cwm, because cwm gives root access.
Linux/Android are all about permissions.
Sent from my i9250
cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
I tried your theory, and it didn't work, still get the message" unable to change ownership permission denied, in recovery mode.
we are still trying to find a solution, here is the discussion: http://www.slatedroid.com/topic/32434-i-got-my-smartq-t20/page__st__260 on Post # 277
rocketero said:
I tried your theory, and it didn't work, still get the message" unable to change ownership permission denied, in recovery mode.
we are still trying to find a solution, here is the discussion: http://www.slatedroid.com/topic/32434-i-got-my-smartq-t20/page__st__260 on Post # 277
Click to expand...
Click to collapse
Sorry to hear that. It sounds like the problem you are having is with a completely different device, so I can't really say why this may be occurring - I don't know how your device's file system is structured. This advice is specifically for the Galaxy Nexus. If a version of CWM exists for your smartQme device, I can't speak to whether it works properly and interprets commands the same way ours does.
cmstlist said:
Sorry to hear that. It sounds like the problem you are having is with a completely different device, so I can't really say why this may be occurring - I don't know how your device's file system is structured. This advice is specifically for the Galaxy Nexus. If a version of CWM exists for your smartQme device, I can't speak to whether it works properly and interprets commands the same way ours does.
Click to expand...
Click to collapse
it's a 9.8 inches tablet branded named called "LePanII'. it has ICS now, before we had Honeycomb 3.2.1.
The manufacture of this tablet did such a bad partitioning that the /system partition was left only with merely 4MB of free space in it.
rocketero said:
it's a 9.8 inches tablet branded named called "LePanII'. it has ICS now, before we had Honeycomb 3.2.1.
The manufacture of this tablet did such a bad partitioning that the /system partition was left only with merely 4MB of free space in it.
Click to expand...
Click to collapse
Good luck with your issue. I doubt it's related to the one we were having on the GNex though.
cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
Sorry if my question is dumb.
Does this command solve the problem for all the folders and sub-folders in sdcard? Thank you for your help!
Sent from my Galaxy Nexus
/data/media # chown -R media_rw.media_rw*
BusyBox v1.20.2-jb static (2012-10-25 21:29 +0100) multi-call binary.
Usage: chown [-RhLHP]... OWNER[<.|:>[GROUP]] FILE...
Change the owner and/or group of each FILE to OWNER and/or GROUP
-R Recurse
-h Affect symlinks instead of symlink targets
-L Traverse all symlinks to directories
-H Traverse symlinks on command line only
-P Don't traverse symlinks (default)
I got this after giving the commands from recovery in adb shell.
What does that mean?
Jar3112 said:
/data/media # chown -R media_rw.media_rw*
BusyBox v1.20.2-jb static (2012-10-25 21:29 +0100) multi-call binary.
Usage: chown [-RhLHP]... OWNER[<.|:>[GROUP]] FILE...
Change the owner and/or group of each FILE to OWNER and/or GROUP
-RRecurse
-hAffect symlinks instead of symlink targets
-LTraverse all symlinks to directories
-HTraverse symlinks on command line only
-PDon't traverse symlinks (default)
I got this after giving the commands from recovery in adb shell.
What does that mean?
Click to expand...
Click to collapse
OK solved, I forgot the space before the *!
Worked like a charm!!
Sent from my Galaxy Nexus
Hello everyone.
I have been able to modify the framework-res.apk file to enable bluetooth tethering for UAMDL from T-Mobile
While I was making the changes in there I also removed from it the call to tethering provisioning and changed the csc files needed too.
So this is for stock UAMDL T-Mobile rooted roms.
I have included the files below to install it if you want.
It does go without saying to backup everything first.
Download from Google Drive
Use the following ADB commands to successfully copy over to the framework folder. Does need to be done via ADB.
Copy new framework-res-mod.apk to root of internal sd card.
adb shell stop (this will cause the screen on your phone to go black that is fine)
adb shell mount -o remount,rw /system
adb shell cp /sdcard/framework-res-mod.apk /system/framework/framework-res.apk
adb shell chmod 644 /system/framework/framework-res.apk
adb shell start (screen will come back on and look like phone is booting again)
after that you can use your favorite root file brower to copy and replace the files customer.xml and feature.xml in the system/csc folder.
If after this you are having problems with getting google play to install apps you might need to master reset.
I want to thank elesbb for help with getting this thing to be able to be compiled and also with the adb instructions to get it copied to the phone without needing a custom recovery but just root.
Awesome man. One question though, so wireless tethering works or only bluetooth tethering?
Yes.
Wireless hotspot, bluetooth (my main goal) and wired tether are working.
Ooops I goofed in the customer.xml file with the APN used for tethering.
I used apn epc.tmobile.com when it should be epc.t-mobile.com
For the time being you can adjust that I will upload a fixed copy tomorrow when I can be at my computer again.
Actually was able to edit and reupload from phone.
It is fixed now.
Apk File not shared for download.
Sorry about that.
Should be fixed.
Give it a try again.
this is what I get
c:\windows-sdk\platform-tools>adb shell stop <<<< phone screen doesnt go black
c:\windows-sdk\platform-tools>adb shell mount -o remount,rw /system
mount: Operation not permitted
c:\windows-sdk\platform-tools>adb shell cp /sdcard/framework-res-mod.apk /system
/framework/framework-res.apk
cp: /system/framework/framework-res.apk: Read-only file system
c:\windows-sdk\platform-tools>adb shell chmod 644 /system/framework/framework-re
s.apk
Unable to chmod /system/framework/framework-res.apk: Read-only file system
am i missing something here?
Sounds like the kernel is not running in insecure mode.
Try installing and enabling insecure adbd with this app and try again
http://forum.xda-developers.com/showthread.php?t=1687590
TheArtiszan said:
Sounds like the kernel is not running in insecure mode.
Try installing and enabling insecure adbd with this app and try again
http://forum.xda-developers.com/showthread.php?t=1687590
Click to expand...
Click to collapse
Thanks man we'll give it a shot after I get off work tonight and let you know how it happens
Sent from my SGH-M919 using xda premium
So far I thought I had bluetooth working on this since it shows as a option in the tethering program but when go to pair with something it does not see or be able to use that profile for internet even though it is enabled on the phone.
Wasn't able to test at the time since I had to send in my tablet but have came to find out that this was not working.
I will continue to try and see what I missed or what I can find.
If anyone has a idea that would be helpful thank you.
Is it possible to implement mod on this Framework mate
http://www.mediafire.com/download/z98oy0q9axmcavv/framework-res.apk