Develop Bugs

[MOD] 3-Click QuickTempRoot TerminalMOD :/

Alright all,
I know there's another thread about "easier" method, but this is easiest for me. 3-Clicks after installation.
I was really tired of typing the same crap over and over after rebooting just to get my temproot back to do more testing/playing.
So I redeveloped this to be quicker/easier upon reboot. Mainly I altered the Term app to be have a scripted start-up on the 1st 3 launches.
I also updated the su/Superuser combo with ChainDD's latest stuff.
Here's how it works, after it's installed.
3ClickTempRooter said:
1) You run the terminal app once, wait a few seconds and it disappears.
2) You run the terminal again, wait for it to FC.
3) You run the terminal a final time and receive root.
Click to expand...
Click to collapse
Now on each reboot, it will be simply 3-clicks (running terminal app 3 times).
Finally ... any executable script placed in /data/local/tmp will be in the path of the new terminal mod. This makes running other scripts very easy.
Installation
Download the attached QuickTempRooter.zip and place it in a directory and unpack it.
Turn on USB debugging and install through adb ...
Here's the adb installation snippet ...
Code:
adb kill-server
adb push su /sdcard/su
adb push Superuser.apk /sdcard/Superuser.apk
adb push busybox /data/local/tmp/busybox
adb push rage /data/local/tmp/rage
adb push root /data/local/tmp/root
adb shell chmod 0755 /data/local/tmp/busybox
adb shell chmod 0755 /data/local/tmp/rage
adb shell chmod 0755 /data/local/tmp/root
adb shell 'pm uninstall com.android.term'
adb install Term.apk
Has made my life wayyy easier when playing with this phone while we wait for the real-deal!!!
Hope you enjoy!
NOTES
If you get a permission denied on the ''adb shell 'pm uninstall com.android.term' '' ... this is normal if you don't have a terminal already installed or have an alternate terminal app (using a namespace other than com.android.term.
If you have another Terminal App installed, you may want to uninstall it first, to avoid confusion.
Also, you may need to reboot after the initial installation for it to work properly!

ummmmm.....Enomther??
Did you get a G2 already?
Great to see you helping out with this

Great to see you here man! Trying this now can't wait to get themes rolling once we get permanent root!
Sent from my T-Mobile G2 using XDA App

I get a permission denied response when running "adb shell 'pm uninstall com.android.term'"

burton14e7 said:
I get a permission denied response when running "adb shell 'pm uninstall com.android.term'"
Click to expand...
Click to collapse
If you didn't already have a terminal app installed that error is normal. Also you may need to reboot once after the initial installation for it to work properly.
~enom~

Thank you sir. Appreciate the goodness.

damn i wish i could hit the thanks button

Thanks man good to have you on the G2 too
Sent from my T-Mobile G2

enomther said:
If you didn't already have a terminal app installed that error is normal. Also you may need to reboot once after the initial installation for it to work properly.
~enom~
Click to expand...
Click to collapse
good to see you on this side.... i have terminal app installed rebooted but still get this denied when running adb shell 'pm uninstall com.android.term
Edit: fixed it uninstalled the Android Terminal E,ulator and just ran the setup now have root thanks

Thank You..
Enom.. (sigh)
Welcome Home..

thank u so much now i can wireless tether. easiest root ever

Sorry, this is my first Android. I came from WM and I was pretty good with it.
I've searched XDA, Youtube, and web to ADB and SDK. I've downloaded it and it's installed. The only thing I don't get is when you said to
"Download the attached QuickTempRooter.zip and place it in a directory and unpack it."
You mean place the extracted files into the sd card correct? That's why the command is "adb push su /sdcard/su".

ddgarcia05 said:
Sorry, this is my first Android. I came from WM and I was pretty good with it.
I've searched XDA, Youtube, and web to ADB and SDK. I've downloaded it and it's installed. The only thing I don't get is when you said to
"Download the attached QuickTempRooter.zip and place it in a directory and unpack it."
You mean place the extracted files into the sd card correct? That's why the command is "adb push su /sdcard/su".
Click to expand...
Click to collapse
No, he means on your PC. You are running adb to push files contained in the zip to your phone.

HamNCheese said:
No, he means on your PC. You are running adb to push files contained in the zip to your phone.
Click to expand...
Click to collapse
So they go into the tools folder? Damn. I think I've in over my head here.
Like this?

If you have better terminal, you can also add the rage and root to specific keys.

At this command I'm getting told "failed to copy 'su' to '/sdcard/su': Read-only file system"
adb push su /sdcard/su

kevdawg said:
At this command I'm getting told "failed to copy 'su' to '/sdcard/su': Read-only file system"
adb push su /sdcard/su
Click to expand...
Click to collapse
Unplug then plug ur phone back in then try again also make sure u are in usb debug mode

Good work, Temp root in like 5 seconds

Quick question, ok I was able to get root for a few mins, then it went away I guess I have to have the terminal always open or ignore so my taskiller doesnt terminated it?

Don't use task killers. (IMHO)
But I tend to have to reboot every once in a while to keep root in tacked within terminal but all my apps seem to stay with su permissions until reboot (or sometimes 12 hours)

[Q] youtube app porting help!!! please!!!

can someone please post DETAILED isntructions to put froyo or gingerbread youtube app thing on samsung epic 4g. ive tried so many time and cant do it. and i delted the stock youtube app with titanium but cant install the other app and i dont wanna pay for root explorer cuz idk if its gonna help at all. i tried using the cmd promt but it says permission denied everytime and it also says adb is not recognized as an internal storage.. PLEASE SOMEONE HELP MEEE I DONT HAVE A YOUTUBE AP AT ALL NOW!!!!!

betterment66 said:
can someone please post DETAILED isntructions to put froyo or gingerbread youtube app thing on samsung epic 4g. ive tried so many time and cant do it. and i delted the stock youtube app with titanium but cant install the other app and i dont wanna pay for root explorer cuz idk if its gonna help at all. i tried using the cmd promt but it says permission denied everytime and it also says adb is not recognized as an internal storage.. PLEASE SOMEONE HELP MEEE I DONT HAVE A YOUTUBE AP AT ALL NOW!!!!!
Click to expand...
Click to collapse
The new YouTube.apk just needs to be placed in '/system/app'. What I did was remove the original YouTube.apk and put the new one in its place and voila. Here is the method adapted for Windows (I think it's all right for Windows). This is also assuming you rooted with a one click root that included the remount script and that you have adb on your computer (the one click rooter should have adb included with it).
1. in the cmd prompt, go to the folder where you have adb and type:
Code:
adb.exe shell
2. inside shell:
Code:
$ su
# remount rw
# mkdir /sdcard/backup
# cp /system/app/YouTube.apk /sdcard/backup
# rm /system/app/YouTube.apk
# exit
$ exit
3. now in the cmd prompt again:
Code:
adb.exe push \path\to\YouTube.apk /system/app
4. Reboot the phone.

gremlyn1 said:
The new YouTube.apk just needs to be placed in '/system/app'. What I did was remove the original YouTube.apk and put the new one in its place and voila. Here is the method adapted for Windows (I think it's all right for Windows). This is also assuming you rooted with a one click root that included the remount script and that you have adb on your computer (the one click rooter should have adb included with it).
1. in the cmd prompt, go to the folder where you have adb and type:
Code:
adb.exe shell
2. inside shell:
Code:
$ su
# remount rw
# mkdir /sdcard/backup
# cp /system/app/YouTube.apk /sdcard/backup
# rm /system/app/YouTube.apk
# exit
$ exit
3. now in the cmd prompt again:
Code:
adb.exe push \path\to\YouTube.apk /system/app
4. Reboot the phone.
Click to expand...
Click to collapse
ok i get to remount rw but the when i type in the nect code it says
mkdir falied for /sdcard/backup read-only filesystem

I install it using terminal emulator.
All I do is type
Su
#rm /system/app/YouTube.apk
#cp /sdcard/DirectoryWithTheYoutubeApp/YouTube.apk /
system/app
Or after you rm, just use the "My Files" app and go on your sdcard and click YouTube.apk and it'll install and work fine. But remember to sign out of youtube before you close it by going to your page and clicking sign out or else it'll keep force closing after you start it up.
I hope I helped...
Sent from my SPH-D700 using XDA App

you guys are gonna freaking kill me. ALL THE TROUBLE I WAS HAVING WAS BECAUSE I HAD MY SDCARD MOUNTED THE WHOLE TIME I WAS TRYING TO DO THIS THE MINUTE I TRIED IT WITHOUT IT BEING MOUNTED IT WORKED...IM SO DUMB!!!!! LOL BUT THANKS FOR THE HELP ALL OF U!!!!!! U GUYS ROCK!!!! N SO DOES THE NEW UTUBE APP .....BTW I UNDERSTAND UR NOT SUPPOSED TO SIGN IN TO IT RIGHT???

I just uninstalled the original, put the modded youtube.apk in the SDX backup folder and installed (restored) it with SDX stock app remover. Simple, fast and no typing required.
Glad you got it worked out though.

me 2!!! this app rocks

Glad it's working! Having the SD card mounted while trying to adb is a common mistake and always a good first troubleshooting check.

[Q] Copying files to /system | S-ON | HTC One X

I have rooted my HTC One X and want to copy files in /system/xbin folder. My phone shows S-ON. And Eclipse is not able to copy files to /system and adb push from shell is also not working. Is there a way I can copy files to /system/xbin?
I am running stock ROM.
My phone is NOT associated with any vendor.

adb remount
adb push filename /system/xbin
Sent from my HTC One X

You can also use es file explorer and go into the options tick up to root and the request root and then tick mount as r/w.
Then just move files as you will.
Sent from my HTC One X using XDA Premium HD app

realunited123 said:
adb remount
adb push filename /system/xbin
Sent from my HTC One X
Click to expand...
Click to collapse
The above way does not seem to work. Whenever I use adb remount(or adb mount) it says operation not permitted and I am trying to this from root privileges
My OS is :- Ubuntu 12.04
ADB(platform-tools) -> Rev 20
If you need anything more please ask me .

Additional Question
treebill said:
You can also use es file explorer and go into the options tick up to root and the request root and then tick mount as r/w.
Then just move files as you will.
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
First of all thanx it worked. I think I will have to live with this way A ADB/Eclipse based would have been cool
Will the files moved from SDcard to phones root in anyway lose and privileges(like losing executable)? If yes, please suggest a way to restore it.

KillerTheLord said:
The above way does not seem to work. Whenever I use adb remount(or adb mount) it says operation not permitted and I am trying to this from root privileges
My OS is :- Ubuntu 12.04
ADB(platform-tools) -> Rev 20
If you need anything more please ask me .
Click to expand...
Click to collapse
When doing adb shell su do you get any toast notification on your phone? Or does it just say denied ?
Strange it works perfectly here Also are you using SuperSU or any other superuser app?
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
KillerTheLord said:
First of all thanx it worked. I think I will have to live with this way A ADB/Eclipse based would have been cool
Will the files moved from SDcard to phones root in anyway lose and privileges(like losing executable)? If yes, please suggest a way to restore it.
Click to expand...
Click to collapse
Yes you need to change the permissions after moving from sdcard. Use Root Explorer(Long press on the file--> Change permissions)

realunited123 said:
When doing adb shell su do you get any toast notification on your phone? Or does it just say denied ?
Strange it works perfectly here Also are you using SuperSU or any other superuser app?
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Yes you need to change the permissions after moving from sdcard. Use Root Explorer(Long press on the file--> Change permissions)
Click to expand...
Click to collapse
I am using SuperSU as Super User App. And I think I am doing something wrong here. You mentioned about adb shell su. I think I might be wrong here. Here is how I tried to execute the command.
[email protected]: <path to platformtools> ./adb remount
remount failed: Operation not permitted
do I have to raise ADB shell to SU level. If yes, how?

KillerTheLord said:
I am using SuperSU as Super User App. And I think I am doing something wrong here. You mentioned about adb shell su. I think I might be wrong here. Here is how I tried to execute the command.
[email protected]: <path to platformtools> ./adb remount
remount failed: Operation not permitted
do I have to raise ADB shell to SU level. If yes, how?
Click to expand...
Click to collapse
Strange. Are you using the stock kernel ? If that is the case then it does not have insecure adbd (ro.secure=0) so remount will not work. Try a custom kernel.
Does adb has SU permissions from recovery ? Try booting into recovery, mounting the system partitions and try to push something from adb. Check the SuperSU app to update binary but that should not be a problem.

realunited123 said:
Strange. Are you using the stock kernel ? If that is the case then it does not have insecure adbd (ro.secure=0) so remount will not work. Try a custom kernel.
Does adb has SU permissions from recovery ? Try booting into recovery, mounting the system partitions and try to push something from adb. Check the SuperSU app to update binary but that should not be a problem.
Click to expand...
Click to collapse
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.

KillerTheLord said:
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.
Click to expand...
Click to collapse
I guess you are using stock kernel then. Try franco's or faux's kernel.
adb remount wont work from os on stock boot.img.
After rebooting into recovery go to mounts and storage-->mount /system and then push something from adb. See if that works.

KillerTheLord said:
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.
Click to expand...
Click to collapse
I think this app does exactly what you want :
http://forum.xda-developers.com/showthread.php?t=1687590

realunited123 said:
I guess you are using stock kernel then. Try franco's or faux's kernel.
adb remount wont work from os on stock boot.img.
After rebooting into recovery go to mounts and storage-->mount /system and then push something from adb. See if that works.
Click to expand...
Click to collapse
Well this didn't work either. I hope to switch to some other ROM in future(I hate HTC Sense ). But as of now Root Explorer did the job. I mounted my sdcard and copied files to it and used Root Explorer to move files to /system and then changed permissions.
Thanks for help it really made it easy .

make sure your path devs are oke for su.
in terminal run:
sudo su
adb kill-server
adb devices
you should see your HOX HTxxxxx nr.
and here you should be able to connect eclipse to HOX by adb.

NikMel said:
make sure your path devs are oke for su.
in terminal run:
sudo su
adb kill-server
adb devices
you should see your HOX HTxxxxx nr.
and here you should be able to connect eclipse to HOX by adb.
Click to expand...
Click to collapse
The problem was not accessing the device using ADB. The problem was I was not able to write to root system. ES Explorer and Root Explorer both did the job for me. I will be putting the final instructions for the process(detailed ones) soon.

Instructions onw how to copy files to root file system on HTC One X with S-ON
1) Unlock and Root your phone. Follow instructions below
http://www.youtube.com/watch?v=gIeq8Jx28cs
and then
http://www.youtube.com/watch?v=80lMHUgxwww
2) Install ES Explorer(File Manager) Link :- https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en
3) Connect device to computer(even if it is not recognized by ADB/Computer)
4) In Phone select Disk drive option. Now the phone's storage will be mounted on your computer as removable device.
5) Copy the files you want to send to phone's root system to any folder here.
6) Change phone's mode to charge only and wait for 2-3 secs(let phone remount sdcard)
7) Open ES Explorer and open menu(those 3 dots at bottom and select Settings)
8) Tick the following options
Up to Root
Root Explorer
Mount File System
9) A dialog box for permission will open Grant it.
10) Now copy files from /sdcard/<Folder where u put files> to where ever you want o copy files to.
11) Long press on file to change permissions and stuff.
Post here if you are stuck someone will surely help you.

can not mount system in read-write mode using adb without recovery mode

I wanted to change my device model, so I copied build.prop from another mobile to my mobile. I am already rooted. But unfortunately I did not change the o.s. from gingerbread to froyo in build.prop ( I have android 2.2 FROYO) When I rebooted, there were many errors. It is now showing no sim card. Mobile network search gives error. Effectively, I can not use the mobile. Terminal emulator, X-plore etc. stopped working. Only Rom toolkit free version works and astro file manager works. Other programs are forcefully closed. Needles to say, I must replace new build.prop with new one.
Using adb I can only pull files but can not write as it is in read only mode.
adb root and adb remount works only if you are in recovery mode ? Y mobile does not have any custom recovery so when I boot in recovery mode it hangs.
Superuser has installed su in system\bin directory. But from adb shell I can use su also. It gives permission denied error. Hence I can not remount the system.
I have read similar threads and found that on some mobiles adb root or adb shell su works but on some not.
I am using Vista 32 bit with admin rights, still can not use root in adb.
Please tell me, how can I mount system read-write. I can not install root explore as google play and even internet is not working.
Please help.

maheshchavan said:
Using adb I can only pull files but can not write as it is in read only mode.
Click to expand...
Click to collapse
activate USB debugging then in console
Code:
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p1 /system
adb push build.prop /system/build.prop
check where is your build.prop

ruscan.calin said:
activate USB debugging then in console
Code:
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p1 /system
adb push build.prop /system/build.prop
check where is your build.prop
Click to expand...
Click to collapse
OMG ruscan.calin i COULD KISS YOU! I had tried to change my OG EVO 4G's buildprop file to another phone so that I could purchase & download an incompatible Google Play app. However after I restarted the phone wouldn't start! It would boot into my rooted HTC EVO 4G Android 2.3.3 and HTC Sense 2.1 but it would get stuck on the wallpaper with just the notification bar at the top and all buttons would be frozen. However I noticed when I plugged in my phone to my computer via usb the computer recognized it. I always keep my phone with USB debugging enabled so I thought I should be good right? I have spent the last 4 hours trying to install and setup adb with no real previous experience with it. I am familiar with dos from years ago and that helped me as it's basic procedure, commands, etc. Then I found out how to install the HTC drivers which I needed and then download the Android SDK with adb that's included which many guides show easily. I started the command prompt (cmd), typed my adb devices command and hurray it showed my phone! I connected and quickly navigated to the build.prop system folder! Luckily when I changed the file I made a bak backup and left it in the same folder. Now the main issue was figuring out how to change the naming of the files which I did via usual adb commands (mv build.prop.bak build.prop). But then to no avail I couldn't get it to write due to it being a system read only folder! Arg! Then I found your post on here, above, and typed it in simply leaving out the adb push portion and replacing that with the mv file command instead and first changing the name of the bad file and then replacing the bak file as the good copy! I exited back to the adb main and unplugged my phone. Moment of truth and man was everything flashing through my head at once! I booted up and YESSSSSSSSSSSSSS, it worked! I went back into root explorer and got rid of the offending leftovers and I've learned my lesson! I just don't want to think about what would have happened if I hadn't found this post. Thank you and if anyone else makes this hug mistake let me know and maybe I can help. Moral of the story don't mess with the build.prop or any system folder unless you know what you're doing! Thanks again!
Quick Guide to Fix Android "build.prop" Issues:
1. Find and download USB drivers for your phone by model or type (HTC EVO 4G's HTC Fastboot drivers): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
2. Download and install Android SDK and choose adb: http://developer.android.com/sdk/index.html
Guide: http://htcevohacks.com/htc-evo-hacks/how-to-install-android-sdk-and-adb-drivers-for-htc-evo-4g/
3. Run a command prompt from the "c:/program files/android/android-sdk/platform-tools/" directory. I had to copy the command prompt to get it to open there but sometimes a right-click action will do it. The guide below will help just navigate down to "Using ADB" and skip the rest.
Guide: http://www.howtogeek.com/114667/how...y-default-move-almost-any-app-to-the-sd-card/
4. Once you open the command prompt and you're in the "c:/program files/android/android-sdk/platform-tools/" foler type "adb devices" and your device should appear. If it does move on to next step.
5. Then type adb shell and use the ls command to see directories. Then you'll need to navigate to the system folder by typing "cd system" and then type "ls" to look around in the directory (similar to "dir" in DOS). You should now see the bad build.prop file.
6. You'll need to rename the file or push a correct version. First you need to use the "adb shell" command again and then "su" and finally "mount -o rw,remount /dev/block/mmcblk0p1 /system" to make the directory writable (see ruscan.calin post above for additional info).
Note: I only had to rename my build.prop as I already had my old one in the same system folder. You may have to copy the bad build.prop to your computer, edit it and then push it back to the same system directory. These directions are only for renaming files in the same folder. For the info on how to copy the file to your computer and push it back to your phone go to step *10 below or use the guide below it.
7. I already had the bad build.prop in the system directory with my old one which I had named build.prop.bak. If you have this too simply rename by changing the name first of the bad file to anything by typing "mv build.prop build.prop.bad" or similar.
8. Next rename the build.prop.bak to build.prop by typing "mv build.prop.bak build.prop". Everything should go smoothly and move onto the next step.
9. Finally, If no error messages are found, simply type "adb reboot" or "adb shell reboot" (Depending which version of ADB you have). You should be done, your phone will reboot like normal (working, lol) and everything should be working again! YAY!
*10. To copy the build.prop to your phone type "adb pull /system/build.prop c:\" and the file should be placed in the main c:/ directory on your computer. Navigate to the root (c:/) directory and then right click and "open with" the "build.prop" file using a notepad or other file editor. Then use the text editor (Notepad, etc) to change back what you originally changed to mess everything up. There is tons of stuff on the net to let you know what to fill back in depending on your phone model/type. Or it's possible to get a previous version from an old Nandroid backup or similar. Save the changed text file and make sure its named the same "build.prop" and make sure it's still in the root directory (If you're having issues on this step or just want more insight check out the guides and threads below for more help).
Guide 1: http://androidforums.com/admire-all...p-computer-not-phone-using-root-explorer.html
Guide 2: http://www.modaco.com/topic/328943-quick-guide-to-modifying-buildprop-with-adb/
Guide 3: http://forums.androidcentral.com/sp...-replaced-build-prop-phone-wont-start-up.html
*11. We've already made the directory writable in step 6 so we simply need to push the file back to the phone. If any error message appear re-do step 6 to make writable again. Otherwise push the modified file back to the phone by typing "adb push c:\build.prop /system/". Back to step 9 above! Yay!
If anyone wants to help cleanup this quick guide or make any changes feel free. I just wanted something so that if anyone else has this issue they won't have to worry or search forever to find a solution. OMG it's 2:30AM, to bed... I ride! LOL
Enjoy,
5th :highfive:

THANK YOU!!! Totally saved me today.
One thing that I noticed. After pushing the correct build.prop, I had to fully power down, then turn back on my Razr for it to load up the fixed build.prop.

error message,Help please
Hello, when i am going to mount and change the permission i am getting constant error od device not found or sh:not found.
What to do?Help me please?

jigarpattani said:
Hello, when i am going to mount and change the permission i am getting constant error od device not found or sh:not found.
What to do?Help me please?
Click to expand...
Click to collapse
What step are you on? What phone do you have? More info please?

i am have problem whit my pantech flex i need to use the build.prop.bak but when i type the su it stay in blank do nothing any ideas pls help

ehy there hope someone can help me...i have an archos 97b platinum, messed up with build.prop. So i pulled out and restored but can't push in any way. I have a cwm installed, tablet rooted but i alwais got "permission denied" at push command. Other error is operation not permitted" if i try remount command from adb. i can do mount -o rw,remount /dev/block/mtdblock7 /system but after that push still give me permission denied.
any suggestion?
http://imgur.com/FDLp4fl
i open a 2nd cmd, give the mount -o rw,remount /dev/block/mtdblock7 /system , and system is now rw, but from the first cmd when i give "push build.prop /system (or /system/build.prop) it will always return me permission denied
help

dev.block
i want to view to dev/block using adb shell #
eg . what block is boot.img
what block is recovery.img
what block is system.img
what block is cache.ing
adb shell getprop mtd is not work . Pls Help Me & sent to mail [email protected]

[UNIVERSAL GUIDE] Root Any Android Device Manually !

THIS GUIDE NO LONGER WORKS BECAUSE ANDROID ISN'T WHAT IT USED TO BE BACK IN 2013-14.
PLEASE STOP WASTING TIME TO FOLLOW THIS OBSOLETE METHOD 1. PLEASE REFER ONLY TO METHOD 3​
The Ultimate Guide to Rooting any Android Device Manually !!!!​
Wanting to ROOT Your Phone but can't do Because Of No rooting Guides or want to learn to root any device ? Then , This Guide Is For YOU
OK So lets start....
**What You Need**
1.Your Unrooted Android Device.
2.ADB Drivers Installed On Your PC. If you Don't Have Download From Here :
Code:
adbdriver.com/‎
3. The Most Inportant Root Kit Made By Me (N'ayam Amarsh'e) - Download From The Attachment.
4.Strength And Courage 'Coz Rooting Voids Your Warranty... If You have a samsung device then Don't Worry Your warranty is gone forever... But if you own any other, maybe you can void it or maybe......
I've Written Android Device as ADV to make it more easy....
**Steps**
So you have the adb drivers installed let's go....
1. Open The root kit by Extracting The Rootkit with WinRAR....
2.Turn 'USB DEBUGGING' 'ON' in your ADV...
3. Connect your ADV to Your PC...
4.In the root kit Open Cmd.exe File ... [ IF YOU CAN'T OPEN CMD, GOTO C:/WINDOWS/SYSTEM32/ COPY CMD .EXE TO YOUR ROOTKIT FOLDER]
5. In CMD window Type the following command...
Code:
->adb devices *Your device will get listed in the window if it doesn't check your adb drivers or if you have followed the steps properly...
->adb push busybox /data/local/tmp
->adb push su /data/local/tmp
->adb push Superuser.apk /data/local/tmp
If you Succeed Move On ...
6.Then You need Root Shell Type :
Code:
adb shell
Note that you see a "$" sign in the command prompt. That means you are not in 'su' shell.
7.Next run the following commands in the shell to change permissions and get some limited privileges for the Superuser files:
Code:
->chmod 6755 /data/local/tmp/su
->chmod 755 /data/local/tmp/busybox
->chmod 644 /data/local/tmp/Superuser.apk
{Note}The names of the files are case sensitive!
8.Done ? Now You need to open a copy of linux which has nautilus... So enter your linux (I recommend using ubuntu 11.4) and type in the terminal (ctrl+alt+T)
Code:
->sudo nautilus
this will open nautilus with root privileges...
You can just boot it from USB so no hassle of installing it... http://www.cyberciti.biz/tips/download-ubuntu-linux-11-04-iso-cd-dvd-images-natty-narwhal.html
Having your ADV connected with USB to PC switch it off and put it in download/recovery mode...
superlouro said:
DEVICE OFFLINE?
! SOLUTION ! (click me)
Click to expand...
Click to collapse
9.In The Exploring Window navigate to
Code:
/data/local/tmp
and move/cut 'su' and 'busybox' to
Code:
/system/bin
...
10.From the tmp Folder you went earlier Move/cut 'Superuser.apk' to
Code:
/system/app
11.Now Reboot You ADV ... Congrats ! You're now ROOTED !
Many Users Are Having Problem with This Method, If you can't do the method 1. Try Method 2.
METHOD 2
PLEASE DON'T ASK ME ABOUT THIS METHOD, THIS IS JUST FOR A TRY, MY BROTHER FOUND THIS METHOD TO BE WORKING, I HAVEN'T TRIED IT YET!
This is linux based method, It's quite easy if you follow every step correctly...
You need to download psneuter, https://github.com/tmzt/g2root-kmod/tree/master/scotty2/psneuter
When you have it execute the following...
Code:
adb devices
Code:
adb push psneuter /data/local/tmp
This will copy the file to your device and now we'll execute it..
Code:
adb shell
cd /data/local/tmp
chmod 777 psneuter
./psneuter
Now You'll see
Code:
adb kill-server
adb devices
adb shell
now # will appear in place of $, or after typing $su.
Code:
# mount -o remount,rw -t rfs /dev/block/st19/system
# exit
$ adb push busybox /system/bin
$ adb push su /system/bin
$ adb install Superuser.apk
$ adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/st19/system
# exit
$ adb reboot
Now your device will reboot and you can see SuperUser App in your app drawer...
----------------------------------------------------------------------
METHOD 3
There is no chance of the phone not getting rooted with my method but If you don't want to do the above methods, Try these, I'm pretty sure they will root your device with ease...
1. Framroot App [Not On Google Play]-http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2.KingoRoot App - www.kingoapp.com
3.One Click Root Free/Pro (My Favorite app, roots many devices with No-Brick Guarantee) - www.oneclickroot.com
4.Root Master App - forum.xda-developers.com/showthread.php?t=2672150
5.z4root App - http://forum.xda-developers.com/showthread.php?t=833953
6.Easy rooting toolkit App-http://forum.xda-developers.com/showthread.php?t=1321582
7.Vroot Software - http://vrootdownload.info/ or http://www.mgyun.com/en/getvroot
8.SRSRoot Software - http://www.srsroot.com
9.Unlock Root Software - http://www.unlockroot.com/download.html
10.Universal Androot App - forum.xda-developers.com/attachment.php?attachmentid=391774
ONLY FOR MTK DEVICES- MTK DROID TOOLS- http://forum.gsmhosting.com/vbb/f60...3-2014-imei-repair-rooting-tool-more-1780568/
HOPE THESE WILL DO....
Press Thanks To appreciate me to Work On Other Guides And Roms....
Your Appreciation Is Needed...
And This GUIDE IS Originally By N'ayam Amarsh'e

I have any error. Device is offline.
---------- Post added at 09:13 AM ---------- Previous post was at 09:02 AM ----------
uukasz92 said:
I have any error. Device is offline.
Click to expand...
Click to collapse
Problem solved i download another adb drivers and work fine

In /UserData/local/tmp i only have one file "directory" and nothing else. It's look like something block the data folder.

uukasz92 said:
In /UserData/local/tmp i only have one file "directory" and nothing else. It's look like something block the data folder.
Click to expand...
Click to collapse
that means you have not properly pushed the files into the directory.... Try installing adb drivers again and do the same steps...Good luck
When you open cmd just type ' adb devices' if your device gets listed then you can start if it doesn't check your drivers...

After uinstall all adb drivers and phone drivers comand prompt shows me a device code and status ofline. At the begining i install atached to therad package of adb drivers. But lately some where in Internet I find some update package of adb drivers. And there was the same sort of files like in your package. I put them there and replace and after that adb shows the device is working and status is online but your guide still does not work. Question is where is real problem ? I checked and Debug Mod is on, drivers are installed.

Try this , download android commander and try to copy the busybox , su and superuser to data/local/tmp

N'ayam Amarsh'e said:
Try this , download android commander and try to copy the busybox , su and superuser to data/local/tmp
Sent from my Mi-492 using xda app-developers app
Click to expand...
Click to collapse
I used the same files in android commander because program can't finde my device to.

Which phone you have.... Try to download its original drivers this might help...

I using Samsung Galaxy Grand Neo (GT-I9060) Jelly Bean 4.2.2
Now is working. But how to move "su" and busybox into system/bin ? Android commander says " You need root to do this." when i try to copy does files into system/bin. Folders are protected and I dont have premission to do anything with them.

uukasz92 said:
I using Samsung Galaxy Grand Neo (GT-I9060) Jelly Bean 4.2.2
Now is working. But how to move "su" and busybox into system/bin ? Android commander says " You need root to do this." when i try to copy does files into system/bin. Folders are protected and I dont have premission to do anything with them.
Click to expand...
Click to collapse
Sorry I forgot that Android Commander works only for rooted phones... Silly Me...
OK you will need to do it with Droid Explorer
OR
linux and in the linux you'll have to type 'sudo nautilus' it'll open it with root privilages...

N'ayam Amarsh'e said:
Sorry I forgot that Android Commander works only for rooted phones... Silly Me...
OK you will need to do it with Droid Explorer
OR
linux and in the linux you'll have to type 'sudo nautilus' it'll open it with root privilages...
Click to expand...
Click to collapse
And in your guide need little correct. In step 9 should be /data/local/tmp not /UserData/local/tmp. Does are two diffrent folders. And before I think I do something wrong when all files be already on right place

Droid Explorer cant change folders premission too. Command prompt says : Read-only drirectory. I don't know what to do now.

uukasz92 said:
And in your guide need little correct. In step 9 should be /data/local/tmp not /UserData/local/tmp. Does are two diffrent folders. And before I think I do something wrong when all files be already on right place
Click to expand...
Click to collapse
thanks.... Guide is updated now

Good 1 helped alot

harmeet singh said:
Good 1 helped alot
Click to expand...
Click to collapse
I am happy that I helped....

Hi! First thank you for that guide. I rooted several devices but with a noname(10.1" A10 dual core) china tablet I have some problems so I hope your solution works.
I have some problems/questions:
1. Step 5: Are you sure it's:
Code:
adb push su /data/local/tmp
instead of
adb push su /data/local/tmp[B][SIZE="5"]/[/SIZE][/B]
I'm currently not able to look at the data folder but if I change the directions e.g to /test/local/tmp it just creates a "tmp" file and overwrites the file with every push command.
2. Step 6: If it's a $ it's not rootet, what should be there if it's rooted? I have a # there. Rootchecker says it's rooted since the beginning, but I cant access with superuser/supersu etc.
3. Step 8 doesn't work. I use a virtual box with ubuntu 13.10(Stinson: new is always better?) for the first time. With "sudo nautilus" I get the message that root access is not granted(failed to register client). I used "gksudo nautilus" instead... does that matter?
4. I can't connect my device to the virtual box. I tried to add the usb device but didn't work. USB Developer Android[0223] is in virtual box connected. However, I dont know where to find it in ubuntu. I'm a ubuntu noob sorry :/
5. Is there another way to get rw permissions?
Thanks in advance :good:

thankyou for information i think is hard for me

Very nice, ty

Humbel said:
Hi! First thank you for that guide. I rooted several devices but with a noname(10.1" A10 dual core) china tablet I have some problems so I hope your solution works.
I have some problems/questions:
1. Step 5: Are you sure it's:
Code:
adb push su /data/local/tmp
instead of
adb push su /data/local/tmp[B][SIZE="5"]/[/SIZE][/B]
I'm currently not able to look at the data folder but if I change the directions e.g to /test/local/tmp it just creates a "tmp" file and overwrites the file with every push command.
2. Step 6: If it's a $ it's not rootet, what should be there if it's rooted? I have a # there. Rootchecker says it's rooted since the beginning, but I cant access with superuser/supersu etc.
3. Step 8 doesn't work. I use a virtual box with ubuntu 13.10(Stinson: new is always better?) for the first time. With "sudo nautilus" I get the message that root access is not granted(failed to register client). I used "gksudo nautilus" instead... does that matter?
4. I can't connect my device to the virtual box. I tried to add the usb device but didn't work. USB Developer Android[0223] is in virtual box connected. However, I dont know where to find it in ubuntu. I'm a ubuntu noob sorry :/
5. Is there another way to get rw permissions?
Thanks in advance :good:
Click to expand...
Click to collapse
For Your First Answer You Need not to worry /tmp and /tmp/ are the same...
2.Have you tried typing 'adb shell' then ' su ' if yes there's your solution.... If not then you have problem with su binary or busybox....
3.You have an Ubuntu 11.4 .iso file so burn it to a blank disk and boot your live disk .... It should be all right then...
4.Answer in 3....
5.Answer in 3....
6.Press Thanks if I helped...

bro im confused wt to do exactly in that sudo ... step pls give a brief explaination