Bootloop Sony logo
oook, this was my first time that i tried to flash a rom with twro ... aaaand i messed all up.
i rooted my phone 2 days ago with kingroot then i used the [XZDualRecovery] to get twrp on my phone.
then i made a backup and wiped cache, dalvik cache, system and data ... then flashed a cyanogen mod
the only problem is that flashing cm put my phone on a bootloop on sony logo (not led neither vibration) and i can't enter the recovery neither flashmode.
sorry for the bad english
XDarkira said:
oook, this was my first time that i tried to flash a rom with twro ... aaaand i messed all up.
i rooted my phone 2 days ago with kingroot then i used the [XZDualRecovery] to get twrp on my phone.
then i made a backup and wiped cache, dalvik cache, system and data ... then flashed a cyanogen mod
the only problem is that flashing cm put my phone on a bootloop on sony logo (not led neither vibration) and i can't enter the recovery neither flashmode.
sorry for the bad english
Click to expand...
Click to collapse
Unlocked or locked bl? Do you know why it failed? Wrong device for ROM, or...?
levone1 said:
Unlocked or locked bl? Do you know why it failed? Wrong device for ROM, or...?
Click to expand...
Click to collapse
bootloader unlocked with the official method (i can't link it but the one from developer sony mobile)
... and it didn't fail it says that concluded succesfully then he asked to be rooted 'cause it wasn't (... i was ) and for a brain fart i swiped for start the rooting sequence (i guess i don't remember exactly)
edit:
while installing cm i couldn't install gapps ...
XDarkira said:
bootloader unlocked with the official method (i can't link it but the one from developer sony mobile)
... and it didn't fail it says that concluded succesfully then he asked to be rooted 'cause it wasn't (... i was ) and for a brain fart i swiped for start the rooting sequence (i guess i don't remember exactly)
edit:
while installing cm i couldn't install gapps ...
Click to expand...
Click to collapse
Can you get fastboot mode?
levone1 said:
Can you get fastboot mode?
Click to expand...
Click to collapse
i'm an idiot, yap it enter in fastboot
XDarkira said:
i'm an idiot, yap it enter in fastboot
Click to expand...
Click to collapse
You can use fastboot on PC, if adb installed, to flash kernel and recovery IMG, then boot into recovery, and flash new ROM or restore backup. I have Z1c, so don't have any files for you, but easy to find in forums.
levone1 said:
You can use fastboot on PC, if adb installed, to flash kernel and recovery IMG, then boot into recovery, and flash new ROM or restore backup. I have Z1c, so don't have any files for you, but easy to find in forums.
Click to expand...
Click to collapse
thank you, that was very usefull
ok, probably i messed up even more:
i wiped evrything from the phone (... again) and re failed to flash (yaeh, i'm so lucky/dumb)
now it stop before the Sony logo and simply stay with the black screen i can still enter fastboot mode but neither Emma Sony flashtool can reconize it ... but fastboot devices from cmd reconize it
XDarkira said:
ok, probably i messed up even more:
i wiped evrything from the phone (... again) and re failed to flash (yaeh, i'm so lucky/dumb)
now it stop before the Sony logo and simply stay with the black screen i can still enter fastboot mode but neither Emma Sony flashtool can reconize it ... but fastboot devices from cmd reconize it
Click to expand...
Click to collapse
Download a ROM file, (try a prf if no luck with CM), copy it onto sdcard, put sdcard in phone, download a CM boot.img to computer, (get it from a ROM zip file), and a twrp recovery.img. fastboot the 2 imgs, boot recovery, and flash ROM. Do you know why Roms aren't working? Are you using right files for your phone?
levone1 said:
Download a ROM file, (try a prf if no luck with CM), copy it onto sdcard, put sdcard in phone, download a CM boot.img to computer, (get it from a ROM zip file), and a twrp recovery.img. fastboot the 2 imgs, boot recovery, and flash ROM. Do you know why Roms aren't working? Are you using right files for your phone?
Click to expand...
Click to collapse
before i do something stupid again ..
i have to follow this step?
1) Download a ROM
2) Put it in the microSD
3) Download latest nightly form the official page of xperia z1c on cyanogenmod.org (can't link the page)
4) exctract the boot.img from the zip
5) download a twrp recovery.img
6) put them in the fastboot folder
7) open a cmd in that folder
8) fastboot boot [cm_boot filename].img
9) fastboot recovery [twrp_recovery filename].img
then reboot in twrp and flash from there?
XDarkira said:
before i do something stupid again ..
i have to follow this step?
1) Download a ROM
2) Put it in the microSD
3) Download latest nightly form the official page of xperia z1c on cyanogenmod.org (can't link the page)
4) exctract the boot.img from the zip
5) download a twrp recovery.img
6) put them in the fastboot folder
7) open a cmd in that folder
8) fastboot boot [cm_boot filename].img
9) fastboot recovery [twrp_recovery filename].img
then reboot in twrp and flash from there?
Click to expand...
Click to collapse
That's right, but I think I see where your problem might be, (unless it's just a typo). Your commands should be: for boot, 'fastboot flash boot (name of file).img; and for recovery, 'fastboot flash recovery (name of file).img.
Try again with that. There's some good files in this thread - a http://forum.xda-developers.com/sony-xperia-z1-compact/general/root-stock-5-1-ub-t3203247
(Sorry, for some reason I thought you had a Z1. I would have linked it sooner).
levone1 said:
That's right, but I think I see where your problem might be, (unless it's just a typo). Your commands should be: for boot, 'fastboot flash boot (name of file).img; and for recovery, 'fastboot flash recovery (name of file).img.
Try again with that. There's some good files in this thread - a http://forum.xda-developers.com/sony-xperia-z1-compact/general/root-stock-5-1-ub-t3203247
(Sorry, for some reason I thought you had a Z1. I would have linked it sooner).
Click to expand...
Click to collapse
it wasn't a typo ... thank you
ok, thank you ... i get back to twrp so now i can flash a rom throught it ... do you have a link on a good one? or a stock unbanded?
XDarkira said:
ok, thank you ... i get back to twrp so now i can flash a rom throught it ... do you have a link on a good one? or a stock unbanded?
Click to expand...
Click to collapse
I prefer to start from scratch, but I have tried some custom stock- based Roms. Of those, I would recommend anything by Munjeni, (he has a few KK and one LP ROM in the Dev forum), or DstrikerZ1. CM based Roms are great for customization and smoothness, but tend to be worse on battery, and very iffy with Xposed.
Related
Hi unlocked and rooted OneX with TWRP is it possible to install the latest ? Viper ROM using TWRP or do need to use clockwork if so any walk through showing a new to custom Roms a step by step guide Googled for it and only get reviews of the ROM
Thanks.....
BedrockFred said:
Hi unlocked and rooted OneX with TWRP is it possible to install the latest ? Viper ROM using TWRP or do need to use clockwork if so any walk through showing a new to custom Roms a step by step guide Googled for it and only get reviews of the ROM
Thanks.....
Click to expand...
Click to collapse
It won't make a difference it will be flashable through TWRP.
Just depends what recovery your most comfortable with !
Wilks3y said:
It won't make a difference it will be flashable through TWRP.
Just depends what recovery your most comfortable with !
Click to expand...
Click to collapse
Thanks for that, now is there instructions on how to download and install Viper is it straightforward read on some sites about flashing kernels etc really a bit puzzling to me although I have flashed a ROM on my Nexus 7 tablet it seemed much more straight forward
Sorry for the newbie questions (
BedrockFred said:
Thanks for that, now is there instructions on how to download and install Viper is it straightforward read on some sites about flashing kernels etc really a bit puzzling to me although I have flashed a ROM on my Nexus 7 tablet it seemed much more straight forward
Sorry for the newbie questions (
Click to expand...
Click to collapse
here's the link. you can find instruction there. http://forum.xda-developers.com/showthread.php?t=1745176
robchongke said:
here's the link. you can find instruction there. http://forum.xda-developers.com/showthread.php?t=1745176
Click to expand...
Click to collapse
Thanks for that, little nervous as the last time I installed a custom ROM (other than my nexus 7) I thought I'd bricked my phone took me two days to get it working (HTC Desire)..
So following those instructions will do the job ?
I need to understand the terminology kernels , boot.img , ROMS, RUU but following those instructions and download the ROM extract the boot.img install that on my phone with fast boot on my PC then boot into TWRP and install the ROM and that's it ?
BedrockFred said:
Thanks for that, little nervous as the last time I installed a custom ROM (other than my nexus 7) I thought I'd bricked my phone took me two days to get it working (HTC Desire)..
So following those instructions will do the job ?
I need to understand the terminology kernels , boot.img , ROMS, RUU but following those instructions and download the ROM extract the boot.img install that on my phone with fast boot on my PC then boot into TWRP and install the ROM and that's it ?
Click to expand...
Click to collapse
you need fastboot folders with fastboot files inside. you can find it here in xda. if this is your first time to flash i suggest you watch video tutorials.
robchongke said:
you need fastboot folders with fastboot files inside. you can find it here in xda. if this is your first time to flash i suggest you watch video tutorials.
Click to expand...
Click to collapse
Yes I have fastboot folder and files just downloaded the Viper ROM extracted the boot.img I have connected my phone checked devices in fastboot and the serial number shows so its there
Acording to the Viper instructions I now need to flash the boot.img then fastboot erase cache is that correct
Where are these videos please
BedrockFred said:
Yes I have fastboot folder and files just downloaded the Viper ROM extracted the boot.img I have connected my phone checked devices in fastboot and the serial number shows so its there
Acording to the Viper instructions I now need to flash the boot.img then fastboot erase cache is that correct
Where are these videos please
Click to expand...
Click to collapse
Correct, flash the boot.img with the command fastboot flash boot boot.img
then fastboot erase cache
then boot to recovery and install the rom.zip via recovery.
Thanks so it really is that simple or am I missing something seen lots having problems with boot loops etc is there anything else I need to be aware of
As far as I can see the order and actions I need to do bearing in mind my HTC is already bootloader unlocked and rooted
1Download the ROM copy to phone
2 Extract Boot.IMG from the ROM
3 Boot my phone into boot loader
4 Connect to PC and in fastboot (phone shows fastbootusb) fast boot flash boot boot.img
5 Still in fastboot fastboot erase cache
5 Boot into recovery (connected to PC or not?) Full wipe then install the ROM followed by installing the updates through recovery
Thanks again
BedrockFred said:
Thanks so it really is that simple or am I missing something seen lots having problems with boot loops etc is there anything else I need to be aware of
As far as I can see the order and actions I need to do bearing in mind my HTC is already bootloader unlocked and rooted
1Download the ROM copy to phone
2 Extract Boot.IMG from the ROM
3 Boot my phone into boot loader
4 Connect to PC and in fastboot (phone shows fastbootusb) fast boot flash boot boot.img
5 Still in fastboot fastboot erase cache
5 Boot into recovery (connected to PC or not?) Full wipe then install the ROM followed by installing the updates through recovery
Thanks again
Click to expand...
Click to collapse
1 Download the ROM copy to phone
2 Extract Boot.IMG from the ROM place it inside the fastboot folder
3 Boot my phone into boot loader
4 Connect to PC and in fastboot (phone shows fastbootusb) fastboot flash boot boot.img
5 Still in fastboot fastboot erase cache
6 Boot into recovery (connected to PC or not?) Full wipe then install the ROM followed by installing the updates through recovery. connected or not you can flash the rom. don forget to wipe dalvik cache and wipe cache. you can update your rom OTA or if it doesnt show up you can just download the update ang flash it through recovery. no need to full wipe and flash the boot.img when flashing the update
Thanks for the help guys I'm all done, now on the Viper Rom first impressions its pretty darn good plenty to play around with
The HUB don't seem to do anything when trying to use the various links just get please wait and then a white screen,
Once again big thanks for the help
BedrockFred said:
Thanks for the help guys I'm all done, now on the Viper Rom first impressions its pretty darn good plenty to play around with
The HUB don't seem to do anything when trying to use the various links just get please wait and then a white screen,
Once again big thanks for the help
Click to expand...
Click to collapse
I believe the Venom hub is down at the moment.......
Glad you got it all sorted, it really is painless if you take your time and follow the guides.:good:
craftycarper1 said:
I believe the Venom hub is down at the moment.......
Glad you got it all sorted, it really is painless if you take your time and follow the guides.:good:
Click to expand...
Click to collapse
Certainly is, think all these warnings re briking your phone makes me nervous that and the problems I had on my old Desire took 2 days to get a ROM on that lol
The more I play with Viper the more I like it, its like having a new phone
BedrockFred said:
Thanks for the help guys I'm all done, now on the Viper Rom first impressions its pretty darn good plenty to play around with
The HUB don't seem to do anything when trying to use the various links just get please wait and then a white screen,
Once again big thanks for the help
Click to expand...
Click to collapse
So did you use twrp to flash the ROM or your PC? Is it possible to use twrp?
Dude ....you are bumping a thread from November last year ! What do you expect to hear ! A Rom is always flashed with a custom recovery and the boot.img file with the pc. Always have been like that
So i'v been trying to get cm10 on my xperia s.
I have unlocked my bootloader, and followed this guide
https://www.youtube.com/watch?v=O52IeX93Jek
Steps i took:
1.Factory reset
2.I placed the ziped "FXP221-cm-10-20130524-UNOFFICIAL-nozomi" and "gapps-jb-20121011-signed" files on the sd card
3. flashed boot.img using fast boot
4. Installed the rom and then the gaps
5. reboot
But when i reboot i'm stuck in the boot loop.
I've now tried this 3 times but always get the boot loop. What can i do to avoid that?
Just format system & then flash rom.Everything will be fine
Sent from my Xperia SL using xda premium
I'm knew to the concept of installing new roms so i need a bit more elaborate answers.
At the moment I'm back on the stock rom and would like to know what i have to do different so that i can install cm10 without getting a boot loop.
I was successful in installing a new rom.
schpongo said:
I'm knew to the concept of installing new roms so i need a bit more elaborate answers.
At the moment I'm back on the stock rom and would like to know what i have to do different so that i can install cm10 without getting a boot loop.
I was successful in installing a new rom.
Click to expand...
Click to collapse
The Reason Why You Are Getting A Bootloop.
Flashing of Boot.img is Not Proper.
What You Need To Do.
Flash boot.img using FLASHTOOL.
In the zip file you have got, extract boot.img in the zip and place it on desktop or anywhere you can find.
Keep zip file in your phone storage.
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (from desktop if you have extracted there)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
In Recovery
-Whip Cache Partion,
-Cache,
-Dalvik Cache,
-Fix Permissions,
Flash The ROM
(Step By Step GUIDE With Images)
http://forum.xda-developers.com/showthread.php?t=1963961
little problem
dwarkesh2492 said:
The Reason Why You Are Getting A Bootloop.
Flashing of Boot.img is Not Proper.
What You Need To Do.
Flash boot.img using FLASHTOOL.
In the zip file you have got, extract boot.img in the zip and place it on desktop or anywhere you can find.
Keep zip file in your phone storage.
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (from desktop if you have extracted there)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
In Recovery
-Whip Cache Partion,
-Cache,
-Dalvik Cache,
-Fix Permissions,
Flash The ROM
(Step By Step GUIDE With Images)
http://forum.xda-developers.com/showthread.php?t=1963961
Click to expand...
Click to collapse
Don't know why, but it doesn't work for me.
Got a XPeria Go with formerly CM9 on it, updated to 4.1.2 and follow this guide: http://go.apeboys.org/index-de.html wich with CM9 worked perfectly. But, now with CM10 i got everytime a Bootloop and not able to fix it.
i used also your guide for flashing the boot.img but it even doesn't work
i tried it several times, and searched for reasons and another guids and tipps, but nothing worked, and since my x10 mini got a sim-lock wich i can't fix, im a little afraid about exotic tipps.
i got an open Bootloader and everything should be ready to do this....
so my question is: How can i fix that?
thanks for help and sry for my bad english.
Exact same problem here
Aaskereija said:
Don't know why, but it doesn't work for me.
Got a XPeria Go with formerly CM9 on it, updated to 4.1.2 and follow this guide: http://go.apeboys.org/index-de.html wich with CM9 worked perfectly. But, now with CM10 i got everytime a Bootloop and not able to fix it.
i used also your guide for flashing the boot.img but it even doesn't work
i tried it several times, and searched for reasons and another guids and tipps, but nothing worked, and since my x10 mini got a sim-lock wich i can't fix, im a little afraid about exotic tipps.
i got an open Bootloader and everything should be ready to do this....
so my question is: How can i fix that?
thanks for help and sry for my bad english.
Click to expand...
Click to collapse
I don't know what's the problem here. The last thing that would cause this would be the fact that I changed the .zip's name (I did that).
AlexBurnout77 said:
I don't know what's the problem here. The last thing that would cause this would be the fact that I changed the .zip's name (I did that).
Click to expand...
Click to collapse
Thank you for the answer.
I fixed the Problem be reflashing the rom and kernel.
How?
schpongo said:
Thank you for the answer.
I fixed the Problem be reflashing the rom and kernel.
Click to expand...
Click to collapse
BTW this is still a problem for me. Nothing seems to work. I flashed everything and wiped everything before flashing but still no satisfying outcome.
Hi, question: I failed time and again to get CWM working, but finally got it to work using x-parts. However, x-parts is keen to point out that it is not a fully fledged recovery and that "if you wipe the system partition for any reason, it will be gone!".
Does this not mean that if I boot into recovery and install a new ROM (Going for the FXP CM10 one, if it matters), then when I wipe the phone beforehand I'll also wipe my CWM install, thus completely bricking the device? Would appreciate any thoughts, thanks
Artemicion said:
Hi, question: I failed time and again to get CWM working, but finally got it to work using x-parts. However, x-parts is keen to point out that it is not a fully fledged recovery and that "if you wipe the system partition for any reason, it will be gone!".
Does this not mean that if I boot into recovery and install a new ROM (Going for the FXP CM10 one, if it matters), then when I wipe the phone beforehand I'll also wipe my CWM install, thus completely bricking the device? Would appreciate any thoughts, thanks
Click to expand...
Click to collapse
Yes, if you wipe the system partition there will be no more CWM. For CM10, you need to flash a custom kernel for it to work. This custom kernel will usually come with a CWM recovery so it will not be wiped when you flash a new ROM.
僕のLT18iから送られてきた
Thanks. But, to clarify, once I flash new CM10/Jellybean Kernel, my current Gingerbread install will also completely cease to function right? And I'd need to flash back to something earlier to get it to work, if I so desired?
Artemicion said:
Thanks. But, to clarify, once I flash new CM10/Jellybean Kernel, my current Gingerbread install will also completely cease to function right? And I'd need to flash back to something earlier to get it to work, if I so desired?
Click to expand...
Click to collapse
Is your bootloader unlocked?
And yes you will have to flash GB ftf using flashtool
Sent from my LT18i
Yeah, I unlocked the bootloader and rooted it ages ago, but have since neglected actually updating the ROM, decided I can't live in a GB world anymore though.
So, as I understand it, process would be flash a new GB kernel to get CWM > Wipe Everything > Install the relevant ROM and GApps > Done? Does this ROM installation include the update to JB kernel then? Thanks
Artemicion said:
Yeah, I unlocked the bootloader and rooted it ages ago, but have since neglected actually updating the ROM, decided I can't live in a GB world anymore though.
So, as I understand it, process would be flash a new GB kernel to get CWM > Wipe Everything > Install the relevant ROM and GApps > Done? Does this ROM installation include the update to JB kernel then? Thanks
Click to expand...
Click to collapse
If I am not mistaken the kernel boot img should be inside the ROM zip. Check the ROM zip. Just flash the boot img using fastboot, boot into CWM recovery and flash ROM & gapps.
僕のLT18iから送られてきた
Ah, ok, well this brings me full circle. Because I'm trying to follow the boot instructions to do so, but:
fastboot -i 0xfce flash boot boot.img
doesn't work. I've taken the boot.img out of the ROM, and put it in the platform-tools folder. But whenever I try this line, it says it can't boot it, and quotes "no error" (no longer at home so can't quote the exact error, but it's something like that). I assumed the problem was me lacking CWM, hence was trying to install that first. Fastboot devices DOES show the device, and both fastboot and adb commands work in a terminal, but I just can't get it to boot into the ROM recovery for Cyanogenmod. Driving my crazy! Thanks
fastboot flash boot boot.img, if I'm not mistaken, is the right command. I use flashtool
Sent from my Xperia Arc S using xda premium
Artemicion said:
Ah, ok, well this brings me full circle. Because I'm trying to follow the boot instructions to do so, but:
fastboot -i 0xfce flash boot boot.img
doesn't work. I've taken the boot.img out of the ROM, and put it in the platform-tools folder. But whenever I try this line, it says it can't boot it, and quotes "no error" (no longer at home so can't quote the exact error, but it's something like that). I assumed the problem was me lacking CWM, hence was trying to install that first. Fastboot devices DOES show the device, and both fastboot and adb commands work in a terminal, but I just can't get it to boot into the ROM recovery for Cyanogenmod. Driving my crazy! Thanks
Click to expand...
Click to collapse
You don't need to add -i 0xfce to the command. Just type fastboot flash boot <name of boot image>.img
僕のLT18iから送られてきた
tangosierra_ said:
fastboot flash boot boot.img, if I'm not mistaken, is the right command. I use flashtool
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Thanks, I'll give that a go, not going to be able to try for a few days now, but will. FYI, I took the line of code I was trying directly from the Cyanogenmod wiki for Anzu
tangosierra_ said:
fastboot flash boot boot.img, if I'm not mistaken, is the right command. I use flashtool
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Ok, so finally got home to try this, still throwing this out: "error: cannot load 'boot.img': No error"
I've got the right boot.img in my platform-fools folder, the relevant CM build on my SD Root along with GApps. Drivers are definitely installed correctly as fastboot devices shows the device, as do adb command when it's on - anyone got any suggestions? Would be immensely grateful if this confounded problem could be solved. Thanks
Artemicion said:
Ok, so finally got home to try this, still throwing this out: "error: cannot load 'boot.img': No error"
I've got the right boot.img in my platform-fools folder, the relevant CM build on my SD Root along with GApps. Drivers are definitely installed correctly as fastboot devices shows the device, as do adb command when it's on - anyone got any suggestions? Would be immensely grateful if this confounded problem could be solved. Thanks
Click to expand...
Click to collapse
What is the name of the .img file? It can't have any spaces inside.
僕のLT18iから送られてきた
popthosegaskets said:
What is the name of the .img file? It can't have any spaces inside.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Looks to just be "boot.img" to me, no spaces or anything.
Have you tried flashtool?
Sent from my LT18i using xda premium
tangosierra_ said:
Have you tried flashtool?
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
No, guess I'll try that next. As I remember, that's what I used to flash in order to root it ages ago. Thanks
I'm trying flash trwp so I can back up the stock mm that I'm on and I wanted to flash the cm13 with mm blobs.
After flashing twrp and I try to go into recovery it just shows the android guy with a ! Icon above him.
I tried using Asus unlock tool apk but it fails and closes.
The for reading.
Look for the modder tool by giovix in general section , easy as pie
timbernot said:
Look for the modder tool by giovix in general section , easy as pie
Click to expand...
Click to collapse
Thx, I'll take a looksie!
timbernot said:
Look for the modder tool by giovix in general section , easy as pie
Click to expand...
Click to collapse
I just tried it and it seemed everything worked ok and flashed twrp. when i get in to bootloader and try to load into recovery it restarts and shows this https://www.google.ca/search?q=reco...hWFWh4KHW0rDPAQ_AUIBygC#imgrc=P6Av23J5FPR39M:
Hmmm, boot back to bootloader and try again ?
Mine work first time.
You did put the unzipped folder straight in C/: drive like advised? And run as admin ?
timbernot said:
Hmmm, boot back to bootloader and try again ?
Mine work first time.
You did put the unzipped folder straight in C/: drive like advised? And run as admin ?
Click to expand...
Click to collapse
Everything flashed fine the first time. I'll give it another shot.
timbernot said:
Hmmm, boot back to bootloader and try again ?
Mine work first time.
You did put the unzipped folder straight in C/: drive like advised? And run as admin ?
Click to expand...
Click to collapse
I just tried that and I get the same error. The fastboot verify shows my phone is connected.
For some reason I don't think its fully unlocking my bootloader.
It will start to flash but at the end it says failed https://gyazo.com/2025260de02c9ffa6c3a5b9f1663c5a2
I then can proceed to install the splash screen to turn it back to black and exit. When I try to boot in bootloader and goto recovery I then get https://www.google.ca/search?q=reco...hWFWh4KHW0rDPAQ_AUIBygC#imgrc=P6Av23J5FPR39M:
Not too sure what's going on here , relating to your initial problem maybe ?
Drivers installed correctly etc..
This tool just works for me..
You got "minimal adb and fastboot" installed before this tool and working fine ???
Can u power off from bootloader ...Then use hard buttons to get to recovery ?
Just a thought.
Flash stock mm recovery back first if not got and try again.
timbernot said:
Not too sure what's going on here , relating to your initial problem maybe ?
Drivers installed correctly etc..
This tool just works for me..
You got "minimal adb and fastboot" installed before this tool and working fine ???
Can u power off from bootloader ...Then use hard buttons to get to recovery ?
Just a thought.
Flash stock mm recovery back first if not got and try again.
Click to expand...
Click to collapse
Yup I can do all that, I'm on stock mm atm also.
quarterbreed said:
Yup I can do all that, I'm on stock mm atm also.
Click to expand...
Click to collapse
Good news that
Be done with it then by flashing stock recovery then sideload another fresh copy of firmware.
Then , use the modder
timbernot said:
Good news that
Be done with it then by flashing stock recovery then sideload another fresh copy of firmware.
Then , use the modder
Click to expand...
Click to collapse
I'm not sure what you mean. How do I flash stock recovery. And why would I have to reflash stock mm?
To start from fresh
Just in case you damaged any sectors flashing earlier what caused the initial problem you posted.
You need to fastboot flash stock recovery from boot loader screen . Boot into stock recovery then select 'update over adb'
Then sideload from PC which sends firmware to phone.
Then you will be back to clean factory settings.
Fastboot commands is >
fastboot flash recovery recovery.img
Putting stock recovery in adb/fastboot folder first and renaming it to 'recovery'
adb commands in stock recovery is >
adb sideload MOFD_SDUPDATE.zip
Renaming , stock ASUS firmware .134 to MOFD_SDUPDATE
and putting it in adb/ fastboot folder first.
Refresh this page later I will add some more info as I am stuck for time at the min ...
Or someone might come along and help further ?
timbernot said:
To start from fresh
Just in case you damaged any sectors flashing earlier what caused the initial problem you posted.
You need to fastboot flash stock recovery from boot loader screen . Boot into stock recovery then select 'update over adb'
Then sideload from PC which sends firmware to phone.
Then you will be back to clean factory settings.
Fastboot commands is >
fastboot flash recovery recovery.img
Putting stock recovery in adb/fastboot folder first and renaming it to 'recovery'
adb commands in stock recovery is >
adb sideload MOFD_SDUPDATE.zip
Renaming , stock ASUS firmware .134 to MOFD_SDUPDATE
and putting it in adb/ fastboot folder first.
Refresh this page later I will add some more info as I am stuck for time at the min ...
Or someone might come along and help further ?
Click to expand...
Click to collapse
Thx Ill have to give it a try when i have some time. So I cant flash twrp with the current stock MM. I should probably wait for the cm14 release to go through all that then.
Adb and fastboot knowledge is usually required when unlocking bootloader and flashing recoveries
Enjoy
timbernot said:
Adb and fastboot knowledge is usually required when unlocking bootloader and flashing recoveries
Enjoy
Click to expand...
Click to collapse
when i do fastboot flash recovery (name of twrp.img) it flashes but when I try to get in to recovery i get that command android picture :[
And ?
What about what you have already been advised ?
Hi. Im stucked at fastboot... I have no OS and no TWRP.... on oneplus 2 it happen to me and I used a tool called FIRST AID, but for op3 it does not exist. I tried flash twrp by fastboot, it says success but when I boot to fastboot, I get a black screen.... Please help me
Im sorry to say this. But r.i.p oneplus 3
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
please help me!
infamouzwt said:
Im sorry to say this. But r.i.p oneplus 3
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
thats not true.....
Which TWRP are you flashing and what rom were you on before the speed bump
NZnewbie said:
Which TWRP are you flashing and what rom were you on before the speed bump
Click to expand...
Click to collapse
Hi. My rom before was freedom OS.... I tried twrp 3.0.2.0 and twrp 3.0.2.1 and stock recovery....
tuga49 said:
Hi. My rom before was freedom OS.... I tried twrp 3.0.2.0 and twrp 3.0.2.1 and stock recovery....
Click to expand...
Click to collapse
Try the modified 3.0.2-19 twrp. Search XDA for it. It's all over.
Don't panic, i had the same issue yesterday. but try to search for the 3.0.2.19 verison of TWRP and flash it with fastboot.
Flash His recovery From here Via CMD OR anytoolkit
Than Move a flashable 3.2.4 on Your Mobile Via Usb (Going Recoverymode first)
Than Install 3.2.4 reboot my be its work...
Nilshalok said:
Flash His recovery From here Via CMD OR anytoolkit
Than Move a flashable 3.2.4 on Your Mobile Via Usb (Going Recoverymode first)
Than Install 3.2.4 reboot my be its work...
Click to expand...
Click to collapse
hi. it says success flashed on cmd, but when I boot to recovery, it just show me a black screen!
abuddlah said:
Don't panic, i had the same issue yesterday. but try to search for the 3.0.2.19 verison of TWRP and flash it with fastboot.
Click to expand...
Click to collapse
Hi. I don't find any twrp with version 3.0.2.19... please help me.
Unbrick tool
Just look here it did help me in nearly the same situation:
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hi! thank you all! I solved the problem flashing twrp with version 3.0.2.19! thank you all!
tuga49 said:
hi. it says success flashed on cmd, but when I boot to recovery, it just show me a black screen!
Click to expand...
Click to collapse
are you Trying 3.5.2???
Having a similar issue. I'm on 3.5.2 unlocked bootloader, no root, stock recovery. Everytime I try to flash TWRP, it appears to succeed, but will never boot to TWRP. Boots fastboot and OOS just fine, but no recovery available. I then tried to flash stock recovery, but same issue appears. I then was able to use skipsoft toolkit to get stock recovery, but only by relocking then unlocking the bootloader. Everytime I tried to simply flash a recovery it appears to succeed, but will not boot to recovery. So skipsoft was able to fix the no recovery problem, but I am still unable to flash TWRP
Mansquatch312 said:
Having a similar issue. I'm on 3.5.2 unlocked bootloader, no root, stock recovery. Everytime I try to flash TWRP, it appears to succeed, but will never boot to TWRP. Boots fastboot and OOS just fine, but no recovery available. I then tried to flash stock recovery, but same issue appears. I then was able to use skipsoft toolkit to get stock recovery, but only by relocking then unlocking the bootloader. Everytime I tried to simply flash a recovery it appears to succeed, but will not boot to recovery. So skipsoft was able to fix the no recovery problem, but I am still unable to flash TWRP
Click to expand...
Click to collapse
Here is the issue. 3.5.2 has a different firmware than previous OOS versions. You will need a specific 3.5.2 modified TWRP. The link is here:
http://forum.xda-developers.com/attachment.php?attachmentid=3875375&d=1473889816
You can see that this is discussed on the oneplus forums here: https://forums.oneplus.net/threads/...ity-update-with-working-twrp-recovery.465353/
I ran into this same problem myself, and realized that this was the issue. You should be very careful because it could cause you some grief. Whatever you do don't lock your bootloader if you end up with a nonfunctional and non functional recovery.
I have the same issue i can flash all the recovery images but non of them worked i tried 1000 different methods and nothing works.. Getting a bit desperate is someone please able to help me got my new phone already broke it kinda..
Saqrez said:
I have the same issue i can flash all the recovery images but non of them worked i tried 1000 different methods and nothing works.. Getting a bit desperate is someone please able to help me got my new phone already broke it kinda..
Click to expand...
Click to collapse
I suggest you to refer to the post of @gmarondel :
gmarondel said:
Just look here it did help me in nearly the same situation:
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
Follow this guide and everything will be ok.
I know u fixed the problem but i think this is a general guide to fix your phone if you have this type of issue after flashing OOS 3.5.6 based roms!
i had the same issue yesterday with freedom os 1.7 (based on OOS 3.5.6) and OOS 3.5.6, here is how i fixed my phone:
- download http://forum.xda-developers.com/attachment.php?attachmentid=3875375&d=1473889816
-unzip it and put it on the desktop
-put your phone in fastboot (make sure you have unloked bootloader and installed all the drivers and adb on your pc)
-press shift and right mouse click on the desktop and hit open a new prompt window here
-write "fastboot boot twrp-3.0.2-19-oneplus3.img" and press enter, your phone should reboot in recovery (keep the prompt open)
-wipe dalvik/system/data/cache/internal storage go back and do format data
-reboot in bootloader(fastboot)
-write in the prompt "fastboot flash recovery twrp-3.0.2-19-oneplus3.img"
-unplug your phone and turn it off switching in fastboot with the volume buttons
-when it's powered off press power+volume down and chose recovery
-now you should boot and flash any rom in recovery (i suggest you to not try to flash any OOS 3.5.6 based roms)
i went back to OOS 3.2.6 but any other custom rom lshould be fine!
Vexo_ said:
I know u fixed the problem but i think this is a general guide to fix your phone if you have this type of issue after flashing OOS 3.5.6 based roms!
i had the same issue yesterday with freedom os 1.7 (based on OOS 3.5.6) and OOS 3.5.6, here is how i fixed my phone:
- download http://forum.xda-developers.com/attachment.php?attachmentid=3875375&d=1473889816
-unzip it and put it on the desktop
-put your phone in fastboot (make sure you have unloked bootloader and installed all the drivers and adb on your pc)
-press shift and right mouse click on the desktop and hit open a new prompt window here
-write "fastboot boot twrp-3.0.2-19-oneplus3.img" and press enter, your phone should reboot in recovery (keep the prompt open)
-wipe dalvik/system/data/cache/internal storage go back and do format data
-reboot in bootloader(fastboot)
-write in the prompt "fastboot flash recovery twrp-3.0.2-19-oneplus3.img"
-unplug your phone and turn it off switching in fastboot with the volume buttons
-when it's powered off press power+volume down and chose recovery
-now you should boot and flash any rom in recovery (i suggest you to not try to flash any OOS 3.5.6 based roms)
i went back to OOS 3.2.6 but any other custom rom lshould be fine!
Click to expand...
Click to collapse
I really appreciate your help but i think i fixed it. Today suddenly my phone went into recovery without doing anything except for 1000 methods. I am so happy that people like you are willing to help people.