What is the best/everyones favourite screen protectors? I head that the Nillkin H+ . Is this true? Thanks :good:
Not sure if there is a best, it's just tempered glass. The major differences would be minor features like thickness, cutout accuracy, and edge rounding.
I have tried many different glass screen protectors, from iVolver to Nilkin. I am back with Nilkin now cause I think it is the best. Especially Im very OCD with fingerprint smudges, and Nilkin does wonderful with the anti-oleophobic coating so, I am very satisfied.
There is no the best, just has the fit. i had just bought a cheap OPT glass screen from here, and cost 2.99, free shipping, and i use well.
I have ordered /cool mango/ tempered glass from Amazon
Pretty cheap just 299rs including delivery, lets see how it goes ..
Similar questions like these are being asked all the time.. And honestly they are all more or less the same. Regardless of what brand you buy and the source, they all claim to do the exact same thing, and after using several glass protectors for different devices, I can safely say this is true. What you'll want main is the thickness, try go get the thinnest possible ones. However do take note that quite often those glass that claim to be 0.2mm is in reality 0.26mm, with some being as thick as 0.3mm. You may not feel that much of a difference by the time you slap the glass on your screen though. So the next important thing to look out for is the quality of the oleophobic coating, which you will only find out how good it is by the time you use it.
My suggestion is just buy any low priced tempered glass off Aliexpress or something. They only cost a dollar or two and usually ship for free, so just go ahead and grab 2 or 3 pieces. If you want to play it safe you may buy different types from different sellers so you can try out different brands and see which one you prefer.
Same boat with cr0wnest.
I bought probably 3 screen protectors from different manufacturers ( and different prices) for Oneplus 1. And all of them either got broke/ chipped ( served there purpose of course, that is protect the screen of the phone).
Now, I just bought 2 pieces of cheaper screen protectors for my Oneplus Two just in case they get damaged.
I got two from Aliexpress which costed $1.28 , fits perfectly and happy so far. I don't think you should pay "genuine" glasses that much money. They are almost identical and do the same jobs.
They are not all the same. I've experienced uneven adhesive coating at the edges of the cheaper ones. It happened once on my LG G3 and now on the OPT. As far as Nilkin is concerned, they are the most consistent in product quality, which is why I used them if I can (I bought the cheaper one as a temporary measure until I could get the Nilkin shipped to me).
Oh, one more thing. I had polarisation issues with cheaper tempered glass protectors but not with Nilkin. This happened when I use the phone for navigation in the car, with polarised sunglasses.
blurblur said:
They are not all the same. I've experienced uneven adhesive coating at the edges of the cheaper ones. It happened once on my LG G3 and now on the OPT. As far as Nilkin is concerned, they are the most consistent in product quality, which is why I used them if I can (I bought the cheaper one as a temporary measure until I could get the Nilkin shipped to me).
Oh, one more thing. I had polarisation issues with cheaper tempered glass protectors but not with Nilkin. This happened when I use the phone for navigation in the car, with polarised sunglasses.
Click to expand...
Click to collapse
Sorry to hear that perhaps you got unlucky. I've tried tons and tons of tempered glass for different devices and they are all almost identical in overall quality. Never had any issues with adhesive as far as I'm concerned, unless the protective film protecting the adhesive was damaged. You are far more likely to get a glass damaged during shipment rather than getting one that is of poor quality.
Casebase Premium Tempered Glass...
...is the best!
Anyway to remove the air bubble inside the glass other than taking it off....
The Toughest Tempered Screen Protector for OnePlus 2 Tested ! Casebase Review - Tortured !
Orzly is in my eyes the best one. It has rounded edges and the fit is perfect. I tried Nillkin but it cracked the first day in the thin area around the home button.
original oneplus protector is pretty good, but evolutive labs makes one thats quite strong. but quite expensive ($25)
The OnePlus Tempered glass is very bad its get scratches.
So far if you install it properly, Nillkin is the best. Mocolo/glass4m and Ultimate Shield is good too
I'm currently using the official tempered glass on my OnePlus Two (my daily driver), and a brandless third-party one for my OnePlus One and I must say that my experience with the official protector has been better.
I dropped my OPT from shoulder height and it landed facedown on a marble floor and it miraculously survived (no visible scratches). So based on my experience it's pretty durable.
I know it probably is accidental but the protector on my OnePlus One is starting to loosen up near the capacity buttons, and I have not even used it that much.
I'm not saying it's first-party > third-party because there are a lot of good third party protectors out there (e.g. Nillkin), but in my case the official one has been treating me better.
Related
So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.
nachtdraegan said:
So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.
Click to expand...
Click to collapse
Between the two, i-Blason. It fits much better than the mime
I have the MIME, can't say as I'm super impressed with it. I'm considering switching to the iBlason just because it's thinner. I feel like the MIME is interfering with the touch sensitivity and causing me to have to press harder than I should. Plus it's just ever so slightly too low and the curved edge interferes with the front facing camera causing a slight distortion at the top of the image. I could move it, but that's where it sits centered.
I had MIME, dropped my MotoX couple of times, MIME did it's job and protected the screen. Unfortunately it chipped and then it started to break really quickly. Don't get me wrong I don't complain about this, it's glass it breaks when dropped on concrete, but it's $25 (+ shipping, I live outside US), and spending this kind of money every month is something I would like to avoid, so I bought some cheep Chinese one on eBay for less than $10. And besides that MIME has nice curved edges, I really don't see the difference...
I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.
I-Blason is the best fit out of all the available tempered glass screen protectors.
I-BLASON is the best fit size for moto x. But the glass cover Distance Sensor also.
Maybe have below problem:
Take a call, phone will auto screen off and can not make it on until end of this call.
Power key also can not use while calling.
Any one who have Iblason to check it have this problem or not?
FSRBIKER said:
I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.
Click to expand...
Click to collapse
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?
samwathegreat said:
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?
Click to expand...
Click to collapse
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
muiriddin said:
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
From what I understand, it used to, but they fixed it a long time ago.
I have the i-blason, was very careful with installation, used the "hinge" method, went on fine, been over a month with no issues, I use a minimal case, so no issue with it. I still "baby" it, the protector is more so that in case, I'll say "lucky I had a protector on it"
muiriddin said:
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
The difference between version 1 and 2.
I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.
speciala106 said:
I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.
Click to expand...
Click to collapse
Ok so the Ghost Glass only lasted about 2 weeks before it started to chip in the sides from just daily use. Then it shattered when I went to remove it. Customer service responded in less than an hour with a free replacement coupon. So A+ for customer service but the product kindof sucked. Using it was great but as soon as there is one fault the whole thing is junk, something that my Zagg Glass didnt have an issue with. The Zagg cracked but still went on without an issue for 2 months, and even upon removal it stayed in one solid piece.
I will try the replacement for a while and then go to iBlason if there is any issues.
I have the motocolo. The touch screen is good, but the sensivity not realy realy.
Love my iblason, it started getting spiderweb cracks after several months of use, but I was able to transfer the cracked one to my replacement moto x while I work on getting a replacement iblason. No luck emailing them, I have to fill out the warranty form on the site now
Iblason have 2 version? I see many problems with proximity sensor?
Thanks
So any updates on the glass protectors you guys are using?
I've had my MIME for over a year and it's starting to chip and crack after dropping it. I'm not sure if I want to get another one cause I had a lot of difficulty putting it on precisely so as to not have bubble edges.
I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.
rupro327 said:
I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.
Click to expand...
Click to collapse
I had motocola but I find the sensitivity of the touch worse so I gave classic screen protector.
I haven't tried all the glass screen protectors, but I bought the monoy and I love it. The best part about it is the edges are curved so your finger just flows over the sides and it feels great.
I've just ordered a G3 and I want to get a decent screen protector for it. I've been looking at the Crystalusion stuff and it looks impressive - does anyone have experience with that? Also, I like Zagg because of the lifetime guarantee. Tempered glass seems to be a good way to go, although it's expensive, but other brands don't seem to offer the same guarantee.
Any other suggestions welcome - although I'm in the UK, so the products need to be available there. In the past I've used the Zagg and Skinomi wet apply screen protectors and have really liked them, so I'm open to that - although I get the impression that a tempered glass solution provides a better feel - is that true?
Important note - I don't use cases with my phones, so the screen protector needs to be solid without a case and not crack around the edges as some apparently do.
Thanks in advance!
I have never used a screen protector or tempered glass until owning a G3. I installed a Tech Armor tempered glass protector and it is great. I believe they also have a lifetime guarantee. I bought it off eBay. The seller was Tech Armor.
Sent from my VS985 4G using XDA Free mobile app
Is this the one you mean? http://www.amazon.co.uk/Tech-Armor-Ballistic-Protector-Touchscreen/dp/B00KFSLJAM/
I've used wet apply protectors and glass protectors on numerous different phones.
Glass definitely has the best feel. If you go the glass route, I think there are a few brands for the G3 that offer maximum coverage (exact cutouts for earpiece/front camera)
Pthink and there was another which I don't remember right now.
I have gone with the Skinomi tech glass in the past but my favorite right now is the iloome flexible glass. It is cheap(can be had for $10), covers pretty close to the edge of screen, and comes with a plastic film on both sides of the glass making installation with hinge method super easy. This is important because hinging tape onto glass isn't a very strong bond and makes installation unsteady. It is also super thin probably the thinnest glass protector on the market as of today.
Can you direct us to where it can be purchased for $10?
Had this on my Nexus 5 and loved it
As we all know, nowdays glass screen protector is probably best way to go.
OP will sell their official protector as they did for OP5 (already on the site). In this case you would expect top quality accesories and we all know how it went with 5.
For me it was no go with protector for ~20 euro that cuts off ~1mm on each screen side.
Here is my question, how it will go this time? how do you think? Maybe someone can provide some insight from their own sources?
As for now, from what i managed to find: it will cut less screen or even nothing (hope).
Later on, please also post your alternatives from 3rd party.
I actually think they might have an easier time with them, they can just produce a protector that covers the whole front of the phone now (No home button/FP Reader) which should reduce any stress fracture areas and make it easier to produce. Due to the change it might be some time before we see an official one.
Judging by the collection of crappy protectors produced for the OP5, hopefully the 5T won't have protectors that only adhere round the edges.
Honestly, I've been quite disappointed by the OP own's glass screen protectors.
After trying a few of the aftermarket ones (Ozry and co.), with varying mileage, I finally went nake.
Still curious to see how that's going to work on 5T.
W!
I dont need the curve screen. Give me the flat one Oneplus! Tempere glass on OP5 is a nightmare.
keaheng said:
I dont need the curve screen. Give me the flat one Oneplus! Tempere glass on OP5 is a nightmare.
Click to expand...
Click to collapse
Same here. I still have to find a TGSP that doesn't have the rainbow effect and that covert the whole front of my OP5.
Have tried multiple ones from eBay and all of them have the stubborn rainbow in the center of the screen.
I officially hate those curved displays.
When I remember my first OPO, and than my OP2... ah, nostalgia.
I honestly love my oneplus branded tempered glass on my OP3 and OP5. The "it blocks pixels" thing is WAY overblown. Yes, you'll lose 1-2 rows of pixels, but it doesn't affect useability at all. They cover the whole screen, use adhesive on the entire protector, no halo effect, and if you use a oneplus branded case, the seam between the protector and case is so tight you can't even tell the phone is in a case.
10/10 would recommend to anyone without hesitation. I've tried a lot of the aftermarket stuff and it's all trash.
I have ordered the op5t glass however I'm sticking to the plastic protection that comes with device
https://forum.xda-developers.com/oneplus-5t/accessories/oneplus-5t-official-tempered-glass-t3709332
Our friend here got it before me. Good to know tho, look 4:03. Mine is at home aleady, after weekend I will write mine opinion.
Anyone have experience with these people and what they offer :
https://www.moutfitters.com/
This morning, I applied my OnePlus branded tempered glass screen protector. I really like it, although there is one spot next to the volume rocker that will not stick down, causing a small halo effect in that spot. I can only see it when the screen is off, so I'm not going to worry about it. This screen protector feels very nice, especially compared to the plastic one that comes on the phone. I recommend that anyone looking for a quality screen protector, buy the one from OnePlus.
I bought the op glass screen protector and the sandstone case when I ordered the 5t. I will keep the factory applied screen protector as long as possible, but its nice to have a back-up. I do think it is cool that the supplied case acts as a guide for installing the op glass preotector.
I too bought the sandstone case/tempered glass protector combo and must say the fit and finish is superb. The screen protector went on perfect thanks to the supplied case acting as a guide and it is 100% bubble free. With the screen protector in place the sandstone case mates perfectly and you can tell they were designed to be used in conjunction with each other. The case looks good and gives the phone a nice grip but I highly doubt it offers any thing besides scratch protection. I will be switching to a more protective case as soon as a good one is available.
From my Google Pixel and Oneplus 3 experience, the official case and screen protector was the best. It's a little bit high on price but it will protect your device longer lasting and like the charm. So, this time for my upcoming OnePlus 5T, I'm going to buy 3D tempered glass screen protector.
Okay. Here it is. We can start the debate soon about which screen protectors actually work on this phone without Halo and bubble issues. It is always an issue with these curved glass screens but there are always 1 or 2 screen protectors that people can get to actually work. Please post which ones you have purchased and how well they worked.
Posting without pictures is not helpful to anyone.
Ordered the ones through Amazon from Mr. Shields and the case/protector from HanhuaTech. The Mr. Shields order gave me 3 and all 3 were nothing but bubbles. Never used their stuff before and highly disappointed. The latter was a nice case, but the screen protector has a black ring around the edges and is impossible to line-up so it doesn't cover the edges of the display area. No bubbles though. Just cut off part of my screen. Still looking. The Otterbox Defender does not include a screen protector.
I tried those Mr shield protectors with my v30 and they were garbage.
The supershieldz worked well with my v30 but the v40 version has that stupid black border which means it only has adhesive at the edges and will have the rainbow effect
Guess we're all screwed for a bit. For what this thing costs, I refuse not to have the tempered glass protector, but they all have the black ring or bubbles. Early adopter blues I guess.
Curved screens, like the V40 (and pretty much every flagship phone) have tend to have poor tempered glass adhesion, in my experience. It seems they all utilize only adhesive along the outer edge, leading them to come unstuck extremely quickly and easily. All of the reviewed models on Amazon, likewise, have this problem. Hopefully a good one will come out for this phone at some point reasonably soon.
I know that T-Mobile tried to sell me an overpriced one when I purchased my phone, though I'm not certain they had any in stock yet. If no models come out that stay stuck pretty well, I will take purchase one of theirs, as they will replace it every time I come in the store.
Be patient and wait for IQ Shield LiQuidSkin, best on the market for curved screens. Available mid Nov.
I quite enjoy the bodyguardz one I got. It's aluminosilicate like gorilla glass and does have the black border, however I've seen 0 rainbowing. Also comes with lifetime replacements which I will probably thoroughly abuse.
I just ordered a set right from their website. It didn't list that it wasn't in stock and ready to ship, so we'll see!
Don't rush! The earlier you get it, the bigger the risk it's not properly tested yet (especially when it comes to curved screens). This early after release, you're the guinea pig...
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
nyttliv7 said:
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
Click to expand...
Click to collapse
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
tveith said:
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I was just looking at the poetic glass on Amazon and can't seem to find a good enough review that specifies it the tempered glass fully seals to the device or only seals around the edges of the glass?
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
justinkerng said:
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
Click to expand...
Click to collapse
I've been looking at that but but I'm in high doubts it's full adhesive
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Blown 89 said:
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Click to expand...
Click to collapse
Dang, it seems so difficult to find good tempered glass screen protectors. Poetic seemed promising but glad you confirmed it is not full adhesive, since so many brands don't specify.
nyttliv7 said:
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
Click to expand...
Click to collapse
Update!
Amid medium level reviews on Amazon, I have to say I'm surprised this pulen sp is working so well. Some kind of drier than normal glue, covers the whole sp, and if you place it perfectly, it's actually a very nice sp. The black frame slightly covers (1/10 of a mm) of left and right sides, but it really doesn't take away anything, not even the screen off blue notification around the frame. I'm not sure about the physical strength though. I'm a very careful person, never really drop my phone. No rainbow! No dust stuck around the borders. Right now I'm not sure I will order the liQuidSkin? I'm happy with this one
Folks, whitestone dome for LG V40 available for sale @ Amazon :
https://www.amazon.com/dp/B07JQT17Q4/ref=cm_sw_r_em_apa_gAR5BbVS4BYDV
I'm using Key liquid glass screen protector. I can't stand the film protectors so decided to use this. It's a wipe on application, scratch resistant, 9H superior hardness rating, water proof and anti bacterial. Just clean the screen with the included cleaning wipe than apply the liquid screen protector via the included wipe. Let sit for about 5 minutes and you're set.
Suggest me a good quality screen protector to get for the OnePLus 11 which I'm going to get on 7th Feb!
As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.
cavist said:
As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.
Click to expand...
Click to collapse
Isn't that the UV and glue protector sticks completely like a superglue and it's very hard to remove it, saw some videos about them.
I've seen the Sapphire glass protector it is great but too expensive for me! I've my eyes on Spigen, Gadgetshieldz screen guard, and ESR but I want a user experience so I can buy one for my phone.
Wasim_Bu said:
Isn't that the UV and glue protector sticks completely like a superglue and it's very hard to remove it, saw some videos about them.
I've seen the Sapphire glass protector it is great but too expensive for me! I've my eyes on Spigen, Gadgetshieldz X Glass, and ESR but I want a user experience so I can buy one for my phone.
Click to expand...
Click to collapse
Not at all, they are quite easy to remove. At least Mocolo ones.
cavist said:
As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.
Click to expand...
Click to collapse
No matter what phone I use.. amFilm Glass screen protecter is always good
The OnePlus 10 pro screen protectors work great on the 11
slaytanic said:
The OnePlus 10 pro screen protectors work great on the 11
Click to expand...
Click to collapse
Is the dimension of both devices the same?
Wasim_Bu said:
Is the dimension of both devices the same?
Click to expand...
Click to collapse
I believe the screen is exactly the same size? The protector fits perfectly on the screen.
slaytanic said:
I believe the screen is exactly the same size? The protector fits perfectly on the screen.
Click to expand...
Click to collapse
Nice, I'll check out some tempered glass brands, or else I'm going to get a film protector from Gadgetshieldz because the tempered glass on a curved-display phone will break more easily than on a flat-screen phone! I've seen reviews on drop tests where the glass breaks because the case will not fully cover the curved edges.
I don't use screen protector.
After 4 years using a 6T, i just got a very thin line only visible under light and close inspection. Moreover, a 45Kg dummbell fell exactly over the screen phone (it was on the floor) and....crystal clear, not even a single mark or damage/deformation on the screen. ¿The almost invisible scratch? Carrying both phone and keys toguether, or even worse but it's plausible. I also owned the Nexus 4/5 and Moto Z Force and don't remember any scratch, at least no one to be concerned.
It's not the answer to you question but just a suggestion, don't spoil the touch/slide feeling, cleariness, and clean look of a naked screen. Of course you can get one of those stupid pseudo-"tempered glass" 9H (it's actually cheap polymer plastic), ... or a simple plastic one wich will be always shady due to have dozens of fingerprints (it's oil after all) without remedy) and will left a yellowish tint over the surface of the crystal (this is a fact, not my subjective impression).
Oh, i remember my Nexus 4, i also thought screen protector was a must, well after a year, i gor rid of it (the tint left by the plastic was there) and never looked behind.
And now we (I) have a more shadows fae beyond like turning a 799$ high end phone (Apple/samsung/former Huawei/etc consider OP10 not a high end (i don't want to say flagship) a mid range ) in a 206g brick.
Bumper case is another story. Now using the 1+ Sandstone and the same issue as with OP6T again, ****, the slider is almost unreachable to be operated propertly. I have been using a generic silicon case while i was waiting the new case, and slider hole was fine, hey, 1,89$ in AliExpress. I just bought it (the same) from Amazon for 10€, of course returned it with a random excuse when i got the new case. I will probably order half a dozen from Ali just to try.
I wass expecting the horror with ColOrxygenOS, but for the moment i havent suffered a stroke
hank81 said:
I don't use screen protector.
Click to expand...
Click to collapse
I've never used screen protectors either. I've got 2 front pockets - one for my keys and one for my phone. It's not that hard. Anything that would actually damage the screen would shred the protector and damage your screen anyway. I've never had any scratches on my screens and a screen protector is not going to save you from an unlucky drop. I really don't see the point.
Stopped counting how many times I dropped my phone and it was saved by a glass screen protector - I would probably say dozens of time and I usually go through 2-3 protectors on each phone in average, depending how long I can live with a look of cracked protector before replacing it.
With typical, accidental drops the additional glass layer absorbs the impact and the phone just bounces of the impact area. In my personal experience for last 10 years with HTC M7, M9, Oneplus 7 Pro, Oneplus 8T and iPhone 12, I have never encountered a drop forceful enough to penetrate the protective layer and damage the actually screen glass under it.
Sure, it is possible but never happened to me when dropping phone from front jacket pocket heights, pants pocket height, going in or out of the car with a phone in the hand, pushing the phone from shelf or the bathroom sink etc.
Last week I removed my uv glass screen protector from OP7Pro that I was preparing for a trade in and it looked perfect and if I would want to trade it locally I would get a slightly better price for a mint condition screen rather than a used one for 5 years.
I've had pretty good luck with film over the years and the ONLY reason I started using them is they don't attract finger prints as bad as glass.
rebar71 said:
I've never used screen protectors either. I've got 2 front pockets - one for my keys and one for my phone. It's not that hard. Anything that would actually damage the screen would shred the protector and damage your screen anyway. I've never had any scratches on my screens and a screen protector is not going to save you from an unlucky drop. I really don't see the point.
Click to expand...
Click to collapse
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.
ummduh said:
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.
Click to expand...
Click to collapse
Exactly. I'll leave the pre-installed screen protector on until it looks like ****. But when it's time to take it off, I won't replace it. Did the same with my 6T.
I see here people have said the 10 pro screen protectors fit, now that a lot more people have the phone has anyone tried this with any tempered glass ones with success?
Any OnePlus 10 Pro screen protector will work on the 11 since the screen (in physical size) is the same.
I use film protectors for a couple of years now and pretty happy with them
SmartDevil on aliexpress released good film protectors for a fair price
Svid said:
Any OnePlus 10 Pro screen protector will work on the 11 since the screen (in physical size) is the same.
I use film protectors for a couple of years now and pretty happy with them
SmartDevil on aliexpress released good film protectors for a fair price
Click to expand...
Click to collapse
4 days ago I ordered the SmartDevil glass since it seems to be a chinese copy of Whitestone glass with the entire bundle (minus the glue foams for the bracket).
I ordered also 2 no name glass screens on 9th of February but it still in shipping, no idea if it will be delivered.
I was curious about the SmartDevil bundle so we will see how much does it actually helps and what is the quality of the bracket.
mikebb00 said:
I've had pretty good luck with film over the years and the ONLY reason I started using them is they don't attract finger prints as bad as glass.
Click to expand...
Click to collapse
Yes, mine is good too without smudges!
ummduh said:
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.
Click to expand...
Click to collapse
Yes, tempered glasses always break often so as I said before a film protector and a case covering the edges of the screen is enough for protection!