Related
Hi all
I tried to root my evo (which had received the OTA 1.47.651.1 update already), but I've run into some problems...
I tried using the simpleroot OTA edition, but kept getting an error in step 3 where the script was unable to create a file in /data/app-cache/...
After that I tried the newly released unrevoked 3 method, which appeared to be working until near the end it rebooted the phone and said it was flashing the recovery, but the phone booted as normal and the program sat there saying it was flashing the recovery for >10min at which point I closed the program.
I was going to try one of the manual methods, but new when I boot into the HBOOT I get an error saying the main version is older, update failed. I've tried a couple different PC36IMG.zip files and all of them get the same error. And if I try to do a factory reset the phone just boots into the HBOOT screen and does nothing.
My phone can still boot normally and is usable except the camera will not turn on.
Can anyone try to help me fix my phone and get it rooted? Or at least restored to its original state?
Thanks in advance for any help!
ok scratch the camera part, after leaving the phone off for a bit and rebooting it appears to be working again... but the rest is still messed up
i had the same or similar problem because i had tried both root methods.
i got it to work with unrevoked 3 after:
1. removing pc36img.zip from the root of the SD card (apparently it'll always try to load a local image before attempting to connect to the PC)
2. uninstalling htc sync from the PC (others say this wasn't necessary, but it was definitely the step that allowed it to work successfully for me)
It turns out PDAnet also interferes with the driver accessing the evo.
Once i removed htc sync and pdanet both from my computer i was able to root my phone successfully.
not sure what the issue with simpleroot was though, but i didn't explore too deeply since unrevoked 3.1 worked now.
Man, that just saved the day for me! Thanks for the info about deleting the zip file.
hey I am having a similar proble with not being able to root. I tried all the stuff you guys suggested but it still wont work.
-i never installed htc sync or PDAnet
am i doing something wrong?
rparker85 said:
hey I am having a similar proble with not being able to root. I tried all the stuff you guys suggested but it still wont work.
-i never installed htc sync or PDAnet
am i doing something wrong?
Click to expand...
Click to collapse
Are you trying to root Android 2.2 (Froyo)
Sent from HTC Evo 4g using XDA app
Android 2.2? I need to root so I can use the setcpu app. I'm not real tech savy but I know I tried all these methods and they didn't work. Am I doing something wrong
How Can I Root my Motorola Defy? all the other threads are from last years, any new way to root it?
I have used SuperOneClick... Rooted my Defy I recently bought then I un-rooted ha ha. That was just so easy that I'm kind of leary about it, so I'm looking for more ways to root than just one click software.
Z4Root
http://forum.xda-developers.com/showthread.php?t=833953
I can confirm that this works on the defy.
1 . Copy the apk over via usb.
2. Then install some kind of file manager from th market
3. You will have to turn on Settings -> Applications -> Unknown Sources
The problem is once you do this ROM MANAGER reports the wrong device so I am not confident to let it flash the recovery image.
If you figure out how to get a recovery image on there let me know.
I suspect flashrec.apk (http://code.google.com/p/flashrec/downloads/list) would work but didn't get a chance to try it before the owner of the Defy left.
Well I re-rooted again after some more searching... Just to have root.
SuperOneClick 1.7 (after root, reboot, than update busybox)
I have yet to try ROMs as I want to make sure I can recover from unforeseen flash failure 110%
On my spare time I try to read up on backing up stock firmware and trying to decide best backup method.
Also I read some where about using defy recovery for flashing... Could be wrong.
But so far all I did was overclock my defy from 300/600/800 to 300/600/1200 on stock firmware. If you want more info on my stock rom pm me, should goto my phone.
Willing to be experiment as long as my phone keeps working.
Sent from my MB525 using XDA App
root motorola defy
Hi, rooting your device is really easy, you just download "Superoneclick" on your pc, connect your device through USB cable and select "Debug USB" from Settings-Apps-development...then just click on "root" and after a short while...rooted!
It should work!
When I got into the download mode, it seems the user before me put roms on it, at least it gives me a number 7 towards the top which made me think they were roms.
I wasn't able to at first, but I am able to get it to the recovery mode now, that looks similar to clockwork mod, but it may just be standard on droids now, idk.
Can I use the Mr Robinson zip or md5 file (http://www.xda-developers.com/how-to-root-the-samsung-galaxy-s-iii-xda-developer-tv/) and flash through the recovery (will it still update the radios, and they other things, I downloaded the 4.11 version (http://forum.xda-developers.com/showthread.php?t=1771687) since that is what my s3 is running TMO T999UVDLJC and the zip file md5 checked out.
If this is not possible, what are my other options to get
the phone rooted?
Edit: I am also running avast on this phone, it detects the apk and application of framaroot and I get error 7 for Armada (not sure on name) and error 9 with the one that begins with a G.
Thank you all in advance.
You can use LJC if you want. You'll be rooted and it'll flash the modem and bootloader as well but they will be the same ones
Using recovery right? I keep it in the zip or unzip it?
Which option, think it has update from cache, and another from folder
Thanks for the quick reply seeing how it's a rather old phone.
No, you flash it with Odin. And unzip it
I cannot connect my phone to pc, it won't detect it and framaroot doesn't work.
Or is there another way to use odin or something?
Are you connecting the phone to a Windows machine? Is there something wrong with the phone's USB port that causes it not to be recognized by the computer? Have you tried different ports and USB cables?
Try towelroot or cf-auto-root
Thank you, towelroot got me rooted, thought it was fornewer phones.
The uUSB cord works for an s6, but not this phone.
Going to try a couple apps that I needed root for.
Should I run the Mr Robinson zip if I am able to get the phone to connect? Or is everything the same? Or will it cause problems?
Edit: I am running windows 8.1. This could be a problem?
There should be no need to run other apps if the phone has root access.
You can check root by installing an app such as Titanium Backup.
UKTone said:
Thank you, towelroot got me rooted, thought it was fornewer phones.
The uUSB cord works for an s6, but not this phone.
Going to try a couple apps that I needed root for.
Should I run the Mr Robinson zip if I am able to get the phone to connect? Or is everything the same? Or will it cause problems?
Edit: I am running windows 8.1. This could be a problem?
Click to expand...
Click to collapse
If it's rooted, no need to do anything else
I used root checker basic.
OK great, I'll grab ROM manager and clockmod to install others and follow some guides.
If you have any remaining tips, please let me know. Still can't connect to a PC, hhaven't tried another PC yet.
Where can it be found?
Found and installed. Now just have to figure how to get into recovery?
edekalil said:
Found and installed. Now just have to figure how to get into recovery?
Click to expand...
Click to collapse
1) If you have ADB, connect, allow adb and adb reboot recovery
2) Hardware key combo: Volume Up & Power until LG screen appears, then Volume Down twice, then Power (yeah, looks like game cheat code but it really works)
I thought I had the drivers loaded because I could see my phone in explorer but I must not have the drivers loaded.now how can I find the adb drivers and how do I set them up? Every time I think I am getting somewhere I get thrown way back again. All I want to do at this time is reload the firmware so I can access the ext sd card witch was lost while trying to root and install cwm. I am about to throw this **** aginest the wall wall that way this will be fixed for good.
Use LGUnifiedDriver, it should install both adb and LG drivers
Where can I get a clean download of it? I am running windows 8.1 . I do have a pc with windows xp as well just havent used it in a while.
LG's support site I think, I still use old version, from first time I've flashed something via LGFlashTools.. You can download that and LG Support Tool from there too.
I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it in device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).
edekalil said:
I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it ino device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).
Click to expand...
Click to collapse
That sounds like Windows problem more. You don't have any of those all-in-one driver packs for Android devices installed? How did you root it?
Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.
edekalil said:
Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.
Click to expand...
Click to collapse
Return it back to Jellybean if possible, use old Jellybean root metod available in the forums, install Freegee and flash TWRP from there, and later update it to newer TWRP on forums. Freegee is a step you can't avoid because it's the only way we can unlock our phones (that I know), and their TWRP doesn't support SDCard (not sure about CWM, but I think it also had that problem, it was long time ago I've used it). E980 can get a bit shady, but it's a great phone, so don't lose your patience yet.
Thanks for the info. I belive I have the drivers installed now, I can see the phone in the device manager of windows and it looks to be good. I will keep you informed as to how it go's.
Sent from my LG-E980 using XDA Free mobile app
Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.
edekalil said:
Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.
Click to expand...
Click to collapse
You're welcome, I'm glad I've helped.
About Philz recovery, I think you have full info on it's thread. If you need some more help, I'm around somewhere
Thanks again.
Hi everyone, I'm here today to avoid going crazy altogether, I know I should most likely give up this time, but I don't want to lose this match. I have been applying root permissions to my devices for 8/9 years now, in the last year I am using only custom roms, so I know the steps to take. This time I want to revive my old S9 exynos, the problem? The usb port is unusable because "there is moisture" plus it does not have root permissions.
I tried everything; Wireless ADB, horrible apps like Kingroot and so on and so forth. I therefore came to the conclusion that to have the root you need the twrp or the pc, to have the twrp you need the root or the pc. For me that I can not use the USB port means that consequently I have to say goodbye to the PC. In other words, I create a paradox, without root I can not have the twrp and without twrp I can not have the root.
someone to give me a good idea? I know I should give up, but really, I don't want to.!
p.s. having the usb port repaired is not an option hahahah