Related
Hi all,
some of you know me from the OnePlus One or the Samsung devices area, where I provide my kernels already for more than two years to Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Finally I got an OnePlus Two a few weeks ago and decided to start a kernel also for this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock 2.x or 3.x, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to LineageOS, CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for OxygenOS 3.x kernel - Click here
Change log for OxygenOS 2.x kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.2.42 or higher !!!) configuration app
(get it from http://www.boeffla.de) to configure all kernel settings
The two CPUs (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and hotplug profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
Additional schedulers: fiops, bfq, sio und zen
Hotplugging done by using stock core_ctl method
Many Hotplug tweak profiles (default are: little CPU always runs on 4 cores, big CPU runs on between 2 and 4 cores based on load)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable only)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable, input boost switch
No CPU and GPU overclocking yet
No CPU and GPU voltage interface (will probably never come to save me support work)
GPU underclocking to 27 MHz possible
msm_adreno_tz and simple_ondemand tweaked to better utilize low frequencies
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
Vibration control
Haptic feedback control for gestures
BCL (battery current limit) driver switchable (default is on)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Thermal engine profiles (in system Tweaks section)
Kernel logger (dmesg) configurable
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
USB charge rate bumped up to 900 mA
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms activated to be used
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always using latest Oxygen OS Initramfs
Device tree build from kernel sources for future options on frequencies and voltages
Always based on latest Oxygen OS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8994)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
a CAF based kernel
anykernel method to use the ramdisk of the installed rom
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.03 or higher for the OnePlus Two Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Ak
* Yank555
* Hardcore
* Chainfire
* Netarchy
* Gokhanmoral
* Simone201
* Entropy512
* Faux
* Savoca
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Special thanks
Also I want to thank xda user @magnamentis for the ongoing testing to iron out the stability issues of the first alphas. He was doing that always taking the risk to "ffy" his brand new OP2.
Special thanks as well to @ZaneZam to pinpoint the issue during my absence as I was on business trips most of the time in the past weeks.
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
OOS3.0.x
http://kernel.boeffla.de/oneplus2/boeffla-kernel-oos/oos3xx/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
I am just waiting for the source code push to github to finish.
Then I will officially open up the thread and release the first beta to all of you.
Andi
Online
Hi all,
kernel is now officially released in version 1.0-beta1.
Download link, as always, on the kernel homepage.
Some notes again:
Make sure you have latest Boeffla-Config app running -> 2.02.03 !!!
This is the very very very first kernel version, so expect bugs or issues
Please be nice when you have an issue, this OP2 kernel costed me more grey hairs already than all other kernels I ever built together
Let the fun begin.
Andi
Awesome!! As stated there's no gpu over clocking, however I don't play games on my phone, will I be able to downclock the gpu?
Finally will try and report if any bug welcome to the opt forums andi i was waiting for you (really)
Alvin Vesper said:
Awesome!! As stated there's no gpu over clocking, however I don't play games on my phone, will I be able to downclock the gpu?
Click to expand...
Click to collapse
Downclock should work, yes.
Andi
Thanks a lot Andi!Had an awesome experience with the test kernel.Gonna flash this soon
Tapped from my ❶+❷
Downloading noww
I'm excited to finally try out this kernel. I've always stumbled upon threads that mentioned this kernel and since I've had my Nexus 6, I never got the chance to try this kernel out. But now that I joined the OnePlus 2 family, I can finally see what this kernel is all about!
Crackdroid said:
I'm excited to finally try out this kernel. I've always stumbled upon threads that mentioned this kernel and since I've had my Nexus 6, I never got the chance to try this kernel out. But now that I joined the OnePlus 2 family, I can finally see what this kernel is all about!
Click to expand...
Click to collapse
Sure, just for expectation management: Do not expect too much for the start now.
The msm8994 soc development is quite fresh, as well as the device.
So I am not really far where I want to be in future in terms of features etc.
But stuff will come over the time, as it was with the OPO kernels and the S5, S3, Tab 10.1 kernels etc.
Andi
Lord Boeffla said:
Sure, just for expectation management: Do not expect too much for the start now.
The msm8994 soc development is quite fresh, as well as the device.
So I am not really far where I want to be in future in terms of features etc.
But stuff will come over the time, as it was with the OPO kernels and the S5, S3, Tab 10.1 kernels etc.
Andi
Click to expand...
Click to collapse
That's definitely understandable and patience is key so there's no rush at all. Thanks for your hard work thus far!
I flashed it fine but there is no apk in the config V-2 download, its just a zip. am I missing something?
Crackdroid said:
That's definitely understandable and patience is key so there's no rush at all. Thanks for your hard work thus far!
Click to expand...
Click to collapse
Absolutely.
For future projection, the functionalities should be pretty much what I have in my OPO and S5 kernels one day. This is my goal.
Andi
Quizo said:
I flashed it fine but there is no apk in the config V-2 download, its just a zip. am I missing something?
Click to expand...
Click to collapse
You need to download the app from here:
http://boeffla.df-kunde.de/bc/
(note, it MUST be an apk. if you download a zip, your browser does not interpret the mime headers correctly and you might use another browser)
Save it on your phone, install it manually.
Andi
@Lord Boeffla
Is it possible (in future of course) to control more paramters of audio chip? (Like in your kernel for i9300 for example)
rascal0pl said:
@Lord Boeffla
Is it possible (in future of course) to control more paramters of audio chip? (Like in your kernel for i9300 for example)
Click to expand...
Click to collapse
Most likely no.
See question 2 in FAQ section:
http://www.boeffla-kernel.de/index.php/faq
Andi
Deleted
great... any possibility to add charging control to increase charging speed.. the only downside of this darn phone.. it feels like it takes for ever to charge... !!
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the other OnePlus (One and X) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, LineageOS, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use LineageOS/CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
It is reported to NOT work fine specifically on Resurrection Remix roms, also some Seraph based roms are not compatible.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14 kernel - Click here
Change log for CM13 kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.50 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
The two CPUs (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and hotplug profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
Additional schedulers: fiops, bfq, sio und zen
Hotplugging done by using stock core_ctl method
Many Hotplug tweak profiles (default are: little CPU always runs on 4 cores, big CPU runs on between 2 and 4 cores based on load)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable only)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable, input boost switch
No CPU and GPU overclocking (also not planned)
No CPU and GPU voltage interface (also not planned)
GPU underclocking to 27 MHz possible
GPU boost implemented (4 levels)
msm_adreno_tz and simple_ondemand tweaked to better utilize low frequencies
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
BCL (battery current limit) driver switchable (default is on)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Thermal engine profiles (in system Tweaks section)
Kernel logger (dmesg) configurable
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
USB charge rate bumped up to 900 mA
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms activated to be used
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Rom flash survival mode configurable in Boeffla-Config
Google gcc 4.9 toolchain (64 bit) used for best stability
Always using latest CM13 Initramfs
Always based on latest CM13 kernel sources (http://github.com/CyanogenMod/android_kernel_oneplus_msm8994)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using LineageOS/CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.50 or higher for the OnePlus 2 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Last change logs:
LineageOS 14.1
http://kernel.boeffla.de/oneplus2/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/oneplus2/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
.... And its here! Finally landed for cm13 for our beloved op2. Thanks a ton @Lord Boeffla
Sent from my ONE A2003 using Tapatalk
Wohooo...
It's party time for op2 users
Awesome! Will shift to CM13 soon to just try this kernel.
Wooohoo. Awesome.
If only my BSNL allowed me to download that right now ???*
Beer time! :highfive:
3FN59977869854618
Fantastic! Waiting for this day!
I have not found any issue in Kernel but a typo in OP. You've mentioned OPX instead of OP2 in temporary alpha notice
Sent from my Amazing OnePlus 2
mido25 said:
I have not found any issue in Kernel but a typo in OP. You've mentioned OPX instead of OP2 in temporary alpha notice
Sent from my Amazing OnePlus 2
Click to expand...
Click to collapse
Good catch, and easy to correct. Thanks for spotting.
Andi
Since this is alpha will your config app not offer updates for the kernel? (The "Pro" version that is )
djsubterrain said:
Since this is alpha will your config app not offer updates for the kernel?
Click to expand...
Click to collapse
It will in future. Once I want to push a new release, the app does it of course.
Why do you ask? Any evidence or only curious?
Andi
Lord Boeffla said:
It will in future. Once I want to push a new release, the app does it of course.
Why do you ask? Any evidence or only curious?
Andi
Click to expand...
Click to collapse
Just curious and because everyone seems to want "deltas" now, lazy folk
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Dinjesk said:
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Click to expand...
Click to collapse
No, it is a public alpha, so all limitations of closed alpha are obsolete for it.
Andi
Dinjesk said:
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Click to expand...
Click to collapse
You need pro version to use tunables in governors. I bet profiles will be up soon in next few days.
Sent from my Amazing OnePlus 2
mido25 said:
You need pro version to use tunables in governors. I bet profiles will be up soon in next few days.
Sent from my Amazing OnePlus 2
Click to expand...
Click to collapse
you can still use old profiles, i am using this one since the alpha1 test
http://forum.xda-developers.com/showpost.php?p=65968195&postcount=422
Does this mean OOS 3.0 version is coming soon?
alexferdean said:
Does this mean OOS 3.0 version is coming soon?
Click to expand...
Click to collapse
not before oneplus will release kernel sources.
question has been asked to much!!
Machinex
MarkOneHundred
Sheer will .
This is machinex.
This is machinex. I have been working on this kernel for over a year now, and am finally comfortable with its release to the public. This kernel builds on the great work of those who have made this device the powerhouse that it is. There are elements here that you have experienced on every GS4 kernel to date, as well as other devices.
The goal I had for this project was upstreaming/updating/experimentally upgrading as much as I possibly could. I have done so, and will continue to do so.
This kernel is ONLY for TW-based, 5.0.1 roms for the I9505!!! NO I WILL NOT DEVELOP FOR DEVICES I DO NOT OWN, SAVE YOUR BREATH!
OBLIGATORY DISCLAIMER:
THIS KERNEL COULD VERY WELL DESTROY YOUR PHONE, YOUR LIFE, YOUR MARRIAGE, Etc. YOU INSTALL AT YOUR OWN RISK!! XDA AND I ACCEPT NO LIABILITY FOR YOUR DECISION TO USE THIS KERNEL!!For noobs: assume that installing this kernel will cause your phone to grow arms and punch you in the face.
PLEASE READ AND UNDERSTAND THIS OP BEFORE LEAVING USELESS "IT DOESN'T WORK" COMMENTS!
Issues that aren't answered here will be dealt with on a case-by-case basis.
SEE POST #2 FOR UPDATES, CHANGELOGS, and FIXES
SEE POST #3 FOR BATTERY/PERFORMANCE INFO
SEE POST #4 FOR A SHORT SYNAPSE BRIEFING
LOGS OR IT DIDN'T HAPPEN! Context helps too. What were your Synapse Settings?
KNOWN ISSUES Wifi issue is fixed! After a fresh rom install, all you need to do is reboot and the appropriate files are created in /data enjoy! HOTSPOT IS FIXED!!!! Finally! I AM AWARE OF AND WORKING ON LOCKSCREEN PIN BUGS!!
FEATURES:
- Linux 3.4.113 + a LOT of upstreamed subsystem code.
- Automatic Busybox Installation, Version 1.25.1.
- Cpufreq core backported ENTIRELY from mainline 4.13. All Cores operate independantly. Their governors and tunables can all be different.
- Govorners: Due to a highly upstreamed cpufreq core api, not many custom governors for now except for Interactive, Intelliactive, and the *NEW* Schedutil governor, described in the documentation like so:
The "schedutil" governor aims at better integration with the Linux
kernel scheduler. Load estimation is achieved through the scheduler's
Per-Entity Load Tracking (PELT) mechanism, which also provides
information about the recent load [1]. This governor currently does
load based DVFS only for tasks managed by CFS. RT and DL scheduler tasks
are always run at the highest frequency. Unlike all the other
governors, the code is located under the kernel/sched/ directory.
Sysfs files:
* rate_limit_us:
This contains a value in microseconds. The governor waits for
rate_limit_us time before reevaluating the load again, after it has
evaluated the load once.
For a great, comprehensive blog regarding the specifics of each governor, as well as the settings found below, please check out the link I've referenced in post #3.
- HARDLIMIT and THERMAL: Incorporated Yank555's CPU Limiting solution, Hardlimit. ALL hardlimits, cpu boost limits, and thermal limits are now PER CORE. I have included it directly in the core cpufreq code, and it is the primary controller for THERMAL, INPUT BOOST and user controlled hardlimits. Thermal overrides both user-selected and input-boost limits, and you can monitor the limiting in real time. Also, the thermal driver now accounts for each core's temperature, and saves time/lock-contention by skipping core control if the temps are below the frequency limiting value.
-CPU HARDPLUG: A driver I built that hooks into the main cpu hotplug API and allows you to disable any core you want, configurable for screen on/off.
- Hotplugs: MX Hotplug, personally built from scratch and uses a real-time kthread for its calculation work. Intelliplug 15.8 (Personally Updated), Alucard Hotplug, MSM_sleeper, Lazyplug, Blu Plug, and Bricked hotplug.
Hotplug Notes: I changed the names of certain functions in the Alucard and MSM Sleeper hotplugs, so that their tunables could be streamlined in Synapse. Synapse is cleaner and simpler than ever, but if you use a third party app, Alucard and MSM Sleeper's max cores and max cores during suspend settings will not be tunable. So anyone who uses a third party app with this kernel let me know and I'll devise a workaround. Mpdecision removed entirely. The "mpdecision" in our sysfs is actually bricked hotplug.
-GPU:Machinactive, Interactive, Conservative, Ondemand, Performance and Powersave GPU Governors, GPU touchboost (fixed suspend issue), ability to lock the min/max freqs, and more!
-Updated version of fauxsound (5.4) (flar2, alesaiko, me). I limited the options in the code to the 4 controls that actually work for our device, and you'll notice a significant stability improvement. Slimbus:Golden-ratio-based operation is pristine. Sound quality is hardware-perfected. The version number is largely arbitrary and I increment when I make any significant improvements. NO MORE USERSPACE CALCULATIONS NEEDED!!!
-A gamot of colour, brightness, and panel options that I frankly didn't think would be feasible for our device, but it's working! MDNIE HIJACK selection, KCAL, and Cyanogen's generic PCC colour control are implemented in Synapse. Note that MDNIE/KCAL stuff is a battery thief, and I've not tested PCC colour control enough for power consumption to give you a definitive statement on it. Note: PCC values are from 1000 (safety limit) to 32768 (or a number close to that), meaning your tuning control is as FINELY GRAINED as possible for this device. I can't believe Synapse actually supports its ridiculous number of steps (and well, I might add). Faux's generic "colour control presets' are in there and they actually work! The stock colours much more vivid, and lower brightness settings benefit from them as I have modified top brightness to my liking.
-HBM:Qualcomm High Brightness Mode: unlocked! This can be controlled via a checkbox in Synapse, but you can also use flar2's HBM widget from the play store. I tried it before and HBM would flicker, but i pulled off a VERY hacky way of making it userspace controllable. Be careful! Though it doesn't seem to drain the battery or overheat the device, it's purely experimental and could cause Chuck Norris to come to your house and personally smash your phone. Now SEPARATE from autobrightness! "SCREEN FLICKER FIX" on PAGE 2
- Completely upstreamed and overhauled cpu, power, scheduling...you name it. Updated Powersuspend to the point where I had to rename it, because it is now closely integrated with the core suspend/power api. Introducing: Prometheus. The driver now calls suspend directly when you turn the screen off, unless a) music is playing, b) the phone is plugged in or c) you choose to disable the feature.
-All the TCPIP tweaks etc, updates to random/frandom, android-specific autogrouping, limited but significant LMK/OOM updates.
-BACKPORTED "codel" fair-queueing net-scheduler, for a faster/more consistent networking experience.
-persistent ram, kexec-support, fast-charge, etc. Drop Caches button in Synapse is useful.
-Utilizing Qualcomm's built-in QRNGD (qualcomm random number generator daemon) with randomness optimized in the kernel = entropy for days.
-BOOTLOADER: Officially only 5.0.1 Bootloaders are supported. Unofficially, someone tried it with a KK bootloader and it worked fine for him so what do I know?
-COMPLETE Synapse support. Download, update, AND install Busybox On Rails from the PlayStore before you install the kernel for best compatibility and support. UPDATE: FULL Busybox installation is now included in machinex installer script. If you have any issues, still feel free to install Busybox on Rails. Upon kernel installation, you'll find Synapse installed in your system apps. If you want to get rid of it, just remove it from /system/priv-app with your file manager.
-CPU and GPU VOLTAGE Control: Both in Synapse. I DO NOT SUPPORT ISSUES IF YOU CHANGE VOLTAGE. YOU ARE ON YOUR OWN.
MENTIONS:
To those listed here, I cannot express how grateful I am for your assistence, patience, and kindness towards me as I badgered you throughout my journey. Though saying "thank you" doesn't feel like enough, thank you all. If I missed someone here, please tell me.
Thankyou:
friedrich420
Slim80
Tkkg1994
flar2
osm0sis
alesaiko
HybridMax
Kushan
Alucard24
Ausdim
Ktoonsez
neobuddy89
javelinanddart
Andreilux
theHacker911
UpInTheAir
Pafcholini
Placiano
Dorimanx
faux123 (seriously like the godfather of s4 kernel hax)
jcadduono
FransiscoFranco
Cyanogen
Meticulus
Eliminator74
Matthew-333 (moonshine kernel)
klabit87
apbaxel
yank555
ion-storm
yseras
PDesireAudio
lsswizard
arter97
Grarek
mrg666
showp1984
gsstudios
Lord Boeffla (andip)
Chainfire
TeamTrickster
tommygreenus
Andycar (For being the best bloody coding buddy I could ask for)
The Machinex Testing Team! - AMAZING folks, just amazing.
My Awesome Testers from this thread.
Again, I'm sure there's tons more.
On to the fun part then
INSTALLATION INSTRUCTIONS:More importantly, the uninstallation instructions. The install pretty much takes care of itself.
There are two links below that you must download in order to safely have an install/uninstall solution for this kernel. The one labelled "machinex-MarkOneHundred.zip" is the kernel. UPDATE: Busybox On Rails isn't required anymore. The second zip is crucial for uninstalling, aptly named "machinex-uninstaller-Jan12.zip." When this kernel is installed (and everytime it boots), it will rename mpdecision, thermald, thermal-engine, and power.default.so with an appended "-bak" suffix, because they all interfere with the updated power/cpu code in the kernel. If you switch to a different kernel, I INSIST that you flash the uninstaller (or take a look at the scripts yourself and do the stuff manually). ATTENTION: SLIM80'S KERNEL CLEANING SCRIPT IS NO LONGER NECESSARY WHEN FLASHING THIS KERNEL!!!!!! I HAVE INTEGRATED MY OWN CLEANUP PROCESS IN THE INSTALLER!!!!!!!!!!
TLDR: NO NEED FOR BUSYBOX ON RAILS, flash zip. use uninstaller zip to uninstall.
DOWNLOADS:
!!!JANUARY 12, 2017:UPDATE!! NEW UNINSTALLER for EVERY VERSION!!!!
DO NOT MIRROR THESE ELSEWHERE. DO NOT INCLUDE THEM IN YOUR ROM WITHOUT ASKING MY PERMISSION FIRST. I AM HAPPY TO COLLABORATE, NOT TO BE ON THE RECEIVING END OF BUG REPORTS CAUSED BY THIRD PARTY DOWNLOADERS.
UNINSTALLER-JAN12: https://www.androidfilehost.com/?fid=385035244224412313
md5: 295ac70bbb17ad2e5dc59e4ca1288e79
MarkOneHundred
INSTALLER: https://www.androidfilehost.com/?fid=745849072291685412
md5: 03af9cfc399d3eda3141254291668563
SOURCE: https://www.github.com/robcore/machinex
(be gentle on my ridiculous commit history, my git skills are shoddy at best).
So keep in mind this a development thread, blah blah blah, but if we all have good discussions (let's TRY to keep it on topic), I'm more than happy to have some fellow nerd friends to talk about my passion with. Heck, I want to use this thread as a chance to meet some other developers who wanna work on stuff together, exchange ideas, learn, and teach me how to get better at git.
Enjoy!
XDA:DevDB Information
Machinex, Kernel for the Samsung Galaxy S4
Contributors
robcore
Source Code: https://www.github.com/robcore/machinex
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: MarkOneHundred
Stable Release Date: 2017-10-31
Created 2016-09-05
Last Updated 2017-10-31
Reserved
UPDATES NOTICE:
Reset your fuelguage (in Synapse) after every install! WIping your cache and dalvik-cache can be helpful for stubborn apps, as well as wiping the cache of any specific app giving you trouble!
-------------------------------------------------------------------------
UPDATES - MarkOneHundred - October 31, 2017
CHANGELOG:
- Updated memory management to roughly linux 4.4.
- Modified Cpufreq in various ways. Per-Cpu frequency touchboost, per-cpu thermal core tracking and limiting, and governors can now be changed if a cpu core is offline. The governor selected will be applied to the core once it comes back online.
- Implemented Omniboost, a generic touchboost interface that can be used for any driver, so long as driver has an external function that the booster can use.
- Built a new hotplug driver from scratch, mx_hotplug. The driver chooses to on/offline cores based on a combination of system load and current number of scheduler requests (and touch of course). What separates this hotplug driver from others is that it uses a real-time kthread in order to give it an "interactive" type calculation.
- Speaking of which, found and fixed the issues with google's most recent interactive governor, and have added it back. Due to it working perfectly now, I forward-ported Intelliactive as well.
- Updated Hardplug to be more efficient.
- Built a little userspace hotplug driver from scratch for those who just need manual core adjustments.
- Tons of other little fixes and updates, to the kernel itself and to Synapse. Please explore around Synapse for some of the updated features.
- Found and fixed any of the user reported bugs i could.
- Continued with the various core updates to 4.14.
- Updated to my own toolchain, 7.1.1 hardfloat, cortex-A15 optimized (it is similiar enough to krait to give us an edge).
- I will update this if i think of anything else.
Sticky: Kernel base is now pretty much somewhere between 3.16-3.18, however I will keep the versioning at 3.4 for certain functions that depend on kernel_version conditionals. Wifi hotspot disconnect issue still persists, but i'd like to think that one day it will be solved...
Can be found in MachineX Rom by the awesome @Andycar found here: https://forum.xda-developers.com/ga...m-machinex-debloated-nogapps-s6-apps-t3573009
See my poorly formatted wiki for older updates:
https://github.com/robcore/machinex/wiki
-----------------------------------------------------------------------
LOGS
In Synapse, under 'LOGS AND PROFILES,' you will find a button that says ALL LOGS. Please press this button IMMEDIATELY after a bug appears that you would like to report, or after a boot if you get a kernel panic (RR).
From now on, without these logs present, I am no longer able to respond to the issues brought up by users.
FIXES
The following fixes involve sqlite and the "Setting Storage" application, also known as Settings Provider, or "com.android.providers.settings package" You will be working with a file named settings.db, and the 'system' table within.
Synapse Cancelled Fix: Get rid of the init.d scripts that are conflicting with UCI service startup. Also check the SuperSU section below...
Sound Fix: Either don't use an audio mod, or don't use Faux Sound Engine. That's all she wrote.
ScreenFlickerFix: Using an SQLITE DB Editor of your choice (from playstore), navigate to the "system" table and change values for "dim_screen" and "intelligent_screen_mode" to 0. *UPDATE* NOW AVAILABLE IN SYNAPSE UNDER THE "EXTRAS TAB"
ChargingTweak: Same as above but change "adaptive_fast_charging" to 0. This is only IF you are having issues which kernel driver-level fast charge. *UPDATE* NOW AVAILABLE IN SYNAPSE UNDER THE "EXTRAS TAB"
MASSIVE THANKYOU to @Andycar for making the above two fixes possible via Synapse!
SuperSU: I'm seeing a lot of permisison errors. Make sure, when using custom roms and kernels, that SuperSU is set to be as permissive as possible so you don't get knox blocked. Here are the crucial settings:
- ENABLE SU during boot
- DISABLE (untick) Mount namespaces separation
- Install SuperSU into /system
- ENABLE Trust System User
- Though I know many have security issues with the idea of allowing apps by default, doing so will make your experience way faster and provide you with less interuptions. At the very least I would set allow by default for Synapse.
These SU settings are kinda par for the course when it comes to android modding.
build.prop: Here is a list of property removals/changes recommended for our device:
REMOVE(lines containing):
ANYTHING with "fps/FPS" in it.
persist.sys.NV_FPSLIMIT
persist.sys.NV_POWERMODE
persist.sys.NV_PROFVER
persist.sys.NV_STEREOCTR
persist.sys.NV_STEREOSEPCHG
persist.sys.NV_STEREOSEP
persist.af.resampler.quality
af.resample
persist.af.resample
ro.telephony.default_network
telephony.lteOnCdmaDevice
dalvik.vm.dexopt-flags
ro.media.enc.jpeg.quality
ro.media.enc.hprof.vid.fps
ro.ril.power_collapse
ro.ril.sensor.sleep.control
pm.sleep_mode
power.saving.mode
persist.cust.tel.eons
persist.sys.dalvik.hyperthreading
boot.fps
shutdown.fps
debug.egl.profiler
hw2d.force
hw3d.force
video.accelerate.hw
debug.mdpcomp.maxlayer
debug.egl.buffercount
debug.enabletr
ro.hwui.renderer.disable_opaque
persist.sys.media.use-awesome (this is default anyway, and is controlled via the nuplayer checkbox in developer settings, so it's unneccesary)
CHANGE:
persist.sys.storage_preload=0 to persist.sys.storage_preload=1
tunnel.decode=false to tunnel.decode=true
af.resampler.quality=4 (or anything else) to af.resampler.quality=255
ro.config.dha_ils_enable=false to ro.config.dha_ils_enable=true
#ro.config.dha_cached_max=4 (remove the #)
#ro.config.dha_empty_max=36 (remove the #)
#ro.config.dha_lmk_scale=0.594 (remove the #)
sys.config.samp_spcm_enable=false to sys.config.samp_spcm_enable=true
sys.config.spcm_preload_enable=false to sys.config.spcm_preload_enable=true
ro.security.mdpp.ux=Disabled to ro.security.mdpp.ux=Enabled
For those having gaming issues, try removing them if you have them or adding them if you don't:
debug.performance.tuning=1
persist.sys.ui.hw=1
This might solve some issues for some folks.
---------------------------------------------------------------------------
INSTALLATION NOTE: Your first boot will probably take longer than usual, because this kernel makes significant (but safe, and auto-backed-up) changes to your core operating system.
This kernel includes drivers that TW has been compatible with since JB (I checked),
but didn't update the kernel drivers for (the best example of this is Autosleep). That said, there are userspace controllers like thermald and mpdecision (a binary linked to kernel code)
that interfere with custom governors, hotplug drivers, etc, so I've made the decision to back them up in the kernel script, and have them disabled while using this kernel.
The UNINSTALLER restores everything to the state it was in before flashing machinex, which is why I so strongly emphasize its use.
PERFORMANCE AND POWER-SAVING
Regarding the age-old performance/battery-life settings questions floating around, I'm gonna go ahead and suggest the following website created by a very dedicated fella who started out with the exact line of questioning, and built a genius guide for users of custom kernels. Heck, it's useful for developers too.
His username here is @gsstudios and he is a recognized developer here on XDA. Deserves it too
http://androidmodguide.blogspot.ca/
and on XDA:
http://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
I encourage you to rate that thread 5 stars, as it is the most comprehensive guide to kernel tunables you ever did see.
Note that I *probably* don't incorporate feature requests, as I have enough on my plate with bringing up the subsystems to a point where I can call this a stable release thread. Don't like it? YOU try backporting linux 3.9 scheduling code to a Samsung 3.4 base
On that note, if anyone here is savvy regarding kernel, C and (not "or") git development, I welcome coding partners because working with a team means better quality, better time management, and a better chance of incorporating fancy tweaks.
Cheers.
SYNAPSE:
Synapse has a default "warning" that comes up the first time you open it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The initial warning is just a bug in the app because it's just been installed.
It's a design flaw in the app itself.
Synapse bases its stability check on whether the device is rebooted within 2 mins of being turned on.
Synapse does this on first boot for every single kernel that uses it,
because it has no previous internal boot settings to base its decision on,
and also because the app expects saved defaults when none have been established yet.
It is nothing to worry about.
Untick the option in settings called "stability check" going forward.
Breathe.
Does it work?
I'm on imperium kernel on Thor s7 rom, I was wondering if your kernel works with m919, tmo gs4, I was looking forward to trying out your rom.
Thank you
-jeff
Hey Jeff,
The answer is...maybe/probably. I know that's probably not what you want to hear, but let me explain.
My device is actually an i337m (which is why i included it in the thread title), but I've been using the international kernels and roms without *major* issues ever since I've owned it. This is built from international sources, and it is running well on Albe's awesome 9.0 rom, so I imagine it will perform well for the ported/upgraded roms for our phones.
So if you've been using the international roms/kernels without problems, I see no reason why this wouldn't work for you other than the bugs/current issues listed in the op.
Sent from my GT-I9505 using XDA Forums
Can you create kernel for cm 13?
Wysłane z mojego GT-I9505 przy użyciu Tapatalka
Welcome to s4 community Bro.
Congratulations . Downloading. ......
Sounds nice bro, good Job! Try this Kernel later as soon as possible on my GT-I9505 with THOR S7 v1.5!
Sent from my SM-G935F using XDA-Developers mobile app
r2089 said:
Can you create kernel for cm 13?
Wysłane z mojego GT-I9505 przy użyciu Tapatalka
Click to expand...
Click to collapse
Sorry man, but CM is not on my list of priorities.
NAROUTO said:
Welcome to s4 community Bro.
Congratulations . Downloading. ......
Click to expand...
Click to collapse
Thanks! Though I've been around here for a while
xell75 said:
Sounds nice bro, good Job! Try this Kernel later as soon as possible on my GT-I9505 with THOR S7 v1.5!
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks! I hope you enjoy!
Everyone who uses this, feel free to provide feedback to help me assess what's needed for MarkTwo!
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.
droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
Click to expand...
Click to collapse
Msm sleeper is a pretty sold hotplug for battery. I've noticed power efficient workqueues tend to slow things down/eat battery. Honestly I would try out msm sleeper for battery savings. Just note that games+youtube by design will eat into battery life. I will add some more power conscious governors soon. Also the usual stuff, the power your screen brightness the better, and turning off vibration/haptic will help.
robcore said:
Everyone who uses this, feel free to provide feedback to help me assess what's needed for MarkTwo!
Click to expand...
Click to collapse
I'm using this Kernel now on my GT-I9505 with THOR S7 v1.5 and so far a stable Kernel for me, many settings and alot settings I had never seen before as I like, very good! Just one thing til yet, Trying to set "Hellsactive" as CPU governor causes a freeze and a full reboot. Otherwise Kernel seems stable, using "Stockdemand" CPU Governor now. Keep going your work!
Sent from my SM-G935F using XDA-Developers mobile app
xell75 said:
I'm using this Kernel now on my GT-I9505 with THOR S7 v1.5 and so far a stable Kernel for me, many settings and alot settings I had never seen before as I like, very good! Just one thing til yet, Trying to set "Hellsactive" as CPU governor causes a freeze and a full reboot. Otherwise Kernel seems stable, using "Stockdemand" CPU Governor now. Keep going your work!
Click to expand...
Click to collapse
You know what, the interactive-based governors gave me trouble for the longest time. But I have found the issues in a great patchset, and am working on a fix that should be ready in a couple of hours. Until then EVERYONE STICK TO ONDEMAND-BASED GOVS!!!!
droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.
Click to expand...
Click to collapse
I'm guessing interactive based gov? If so, see my post above, MarkTwo is coming tonight.
robcore said:
You know what, the interactive-based governors gave me trouble for the longest time. But I have found the issues in a great patchset, and am working on a fix that should be ready in a couple of hours. Until then EVERYONE STICK TO ONDEMAND-BASED GOVS!!!!
Click to expand...
Click to collapse
Nice mate that's ok, thanks for the information! I'm looking forward for your new version!
Sent from my SM-G935F using XDA-Developers mobile app
xell75 said:
Nice mate that's ok, thanks for the information! I'm looking forward for your new version!
Click to expand...
Click to collapse
Dude thank YOU. I can't tell you how much I appreciate you and the others for testing this out and helping me iron out the remaining bugs, and being so understanding that "interactive based govs are broken" which is super embarrassing. Lol.
droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.
Click to expand...
Click to collapse
Update: simple gpu gov is snappy at stock settings and sooooo much better for battery consumption.
Also if memory serves me correctly, aren't you a cm kinda guy ; )
robcore said:
I'm guessing interactive based gov? If so, see my post above, MarkTwo is coming tonight.
Click to expand...
Click to collapse
Nope havent touched anything
There was a failed message when i booted the synapse app.
Something link kernel image failed but not sure should have taken a screencapture and the log.
Either way its working now.
robcore said:
Update: simple gpu gov is snappy at stock settings and sooooo much better for battery consumption.
Also if memory serves me correctly, aren't you a cm kinda guy ; )
Click to expand...
Click to collapse
More into like AOSP rom but had to use Tw for camera/video
I just noticed something.
My display colors somewhat changed? I think in a good way. Lol
simple gpu gov in marktwo?
droidblitz said:
Nope havent touched anything
There was a failed message when i booted the synapse app.
Something link kernel image failed but not sure should have taken a screencapture and the log.
Either way its working now.
More into like AOSP rom but had to use Tw for camera/video
I just noticed something.
My display colors somewhat changed? I think in a good way. Lol
simple gpu gov in marktwo?
Click to expand...
Click to collapse
Well it's great to see you here man! Lol with screen colour I made some fixes and changes to sammy's mdnie code. Upon checking the code against their roms, it turns out they've never bothered to fix discrepancies between the values in settings and the driver itself! "Standard" and "dynamic" have been switched this whole time. Also "auto" has been a placebo all along, they have had the backend in place all along but never initialized it in the list of available screen modes. On that note, for even cooler stuff check out the "video_mode" scenario in synapse. It's AWFUL for battery life, but sharpens everything to a crisp. I'm pretty sure kcal helped with color too(?).
As for simple gpu gov, works just fine on MarkOne! Franco's simplification to it made it a freakin' powerhouse while being better for battery somehow.
Building MarkTwo as we speak, then I'll test it and it's out! I'm working on the gov settings in synapse while building too. The tunable settings are ticking me off.
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3, OnePlus 2, OnePlus One, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, LineageOS, Cyanogenmod, Omnirom etc.)
Thanks to generous supporters, I now own a second OnePlus 3T device which allows me to also provide a LineageOS kernel for this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use LineageOS or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14.1 kernel - Click here
Known issues
None
Features
Note: This kernel only runs on LineageOS 14.x for the OnePlus 3T - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.33 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
Configurable GPU boost (low, medium, high)
No CPU overclocking - not planned as well for next future, the OP3T is fast enough with standard frequencies
No GPU overclocking, no CPU and GPU voltage interface - this will not come in future as well as I do not like it
CPU core profiles to restrict number of CPU cores being used (the OP3T does not hotplug based on load)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker), microphone gains (only experimental)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
USB fast charging enabled (up to 900 mA instead 500 mA)
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Support for "pocket mode" - check out Boeffla Pocketmode app on Google Play Store if your rom has no pocket mode support
Boeffla touchkey LED control
Boeffla generic wakelock blocker V1.1.0 (documentation)
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys and home button are locked as long as screen is in use (touched) for better usability - configurable
Swap supported
Support for extended slider functions on certain custom roms
Remove verifiedbootstage flag to avoid triggering safetynet
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.26.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest official LineageOS kernel sources (http://github.com/LineageOS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using LineageOS or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.33 or higher for the OnePlus 3T Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to supporters
Many thanks to the following supporters, that helped in funding an additional device to allow development of this kernel for the OP3T (chronological order:
ReAnimat, midoclaze, owen g., DJSubterrain, ArminT, w0lf, f616, TGX03, ScratMan, matze779, nihilista, Kirahvi, Ingo, Raimu, albireox, #lopamo72, timobayl, Alienrobot, Selim B., Ukcain, Christian B., Carina S., schvagier, Michael L., Jason K.
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1:
Change log
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Good morning,
very first version 2.0-beta1 is out.
Expect bugs (but not too many as the kernel is very much similar to the OP3 LineageOS kernel).
Anyways enjoy
Andi
I just got the device and thought I would not unlock bootloader for some time. Damn it...
saurabh40629 said:
I just got the device and thought I would not unlock bootloader for some time. Damn it...
Click to expand...
Click to collapse
Come on. Without unlocked bootloader you have no fun
But I understand your point, it would be nice to have a device really being vanilla and unrooted.
Andi
Working nicely so far
so far so good just experiencing slow charging and heating while charge is it only me ? it takes around 1hr 49min to charge from (0 to 100)
finally ! for 3T lineage based. Welcome.
i was waiting for this, i wanted to see your kernel in action
Thank you very much, for this Kernel. This delivers the ultimate experience to the OP3T in my opinion!
Dhairya said:
so far so good just experiencing slow charging and heating while charge is it only me ? it takes around 1hr 49min to charge from (0 to 100)
Click to expand...
Click to collapse
Charging drivers are 100% original, no changes. Also nothing else changed that would cause that.
And yes, I do not face that myself at all.
Andi
Lord Boeffla said:
Charging drivers are 100% original, no changes. Also nothing else changed that would cause that.
And yes, I do not face that myself at all.
Andi
Click to expand...
Click to collapse
will try with a clean flash
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
Haven't heard of it. Do you have a link to it ?
EDIT:
Found it
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
Not by default: my rom does not change filenames, since it comes only with 3t blobs. You can either copy the files to their new names and go ahead (not tested), or you can build boeffla kernel yourself (very easy with @Lord Boeffla's provided scripts!) reverting the filename commit (tested with beta1 git status, I see no reason at all why current git shouldn't work).
BTW: @Lord Boeffla: thanx foe your efforts. Following your git with curiosity!
I get soft reboots on my OP3T on the official 20170223 build, when I try to use the gestures ("V" for Flashlight). Some else having this issue?
akoyaxd said:
I get soft reboots on my OP3T on the official 20170223 build, when I try to use the gestures ("V" for Flashlight). Some else having this issue?
Click to expand...
Click to collapse
I´m on latest RR and have no issues with gestures.
redukt said:
I´m on latest RR and have no issues with gestures.
Click to expand...
Click to collapse
Interesting.
But I definitive have this issue only if I have the boeffla kernel installed.
Edit: After wiping my system partition and reflashing LineageOS, SU, Snapdragon Camera and the kernel, it works fine.
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
nvertigo67 said:
Not by default: my rom does not change filenames, since it comes only with 3t blobs. You can either copy the files to their new names and go ahead (not tested), or you can build boeffla kernel yourself (very easy with @Lord Boeffla's provided scripts!) reverting the filename commit (tested with beta1 git status, I see no reason at all why current git shouldn't work).
BTW: @Lord Boeffla: thanx foe your efforts. Following your git with curiosity!
Click to expand...
Click to collapse
If you want to use boeffla kernel on my rom read this.
nvertigo67 said:
If you want to use boeffla kernel on my rom read this.
Click to expand...
Click to collapse
I'll stick with the kernel that ships with your ROM. I don't really know why I wanted to use a custom kernel, it's not like the ROM isn't quick as is to be honest.
Thank you for the advice tho.
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3T, 3, 2, One and X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
Read first, especially when you are new to my kernels:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/troubleshooting
http://boeffla.de/index.php/support/support
Boeffla-Kernel uses the anykernel concept = Flash stock kernel of rom first (by just flashing LineageOS rom dirty over first)!
This kernel is ONLY compatible to LineageOS stock, nothing else !!!
If you are using a custom rom that bases on LineageOS, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is LineageOS stock.
It is not supposed to be compatible to OxygenOS, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation).
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting change log...)
Change log for LineageOS 14 kernel - Click here
Known issues
none known
Features
Note: This kernel only runs on LineageOS for the OnePlus 5 - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.54 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: zzmoove, blu_active, impulse, cultivation
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
Underclocking CPU and GPU supported
No CPU and GPU overclocking (turned out to be slightly instable)
No CPU and GPU voltage interfaces (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.1 (own compilation)
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest LineageOS kernel sources (https://github.com/LineageOS/android_kernel_oneplus_msm8998)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app Boeffla-Config V2 from the downloads section on www.boeffla.de.
You need at least version 2.4.54 or higher for the OnePlus 5 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* arter97
* Grarak
* Entropy512
* Faux
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1
http://kernel.boeffla.de/oneplus5/boeffla-kernel-cm/cm14.0/changelog.htm
--- Reserved 2 ---
Here we go - Kernel is released now. Thread open.
Let the fun begin
Andi
One more reason to flash lineageos
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
fjsferreira said:
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
Click to expand...
Click to collapse
Mmmm.
Quoting the change log:
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Click to expand...
Click to collapse
So... yes.
Andi
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
just landed in boeffla los kernel! Thanks!
finally finally ....on my way Andy <3
fjsferreira said:
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
Click to expand...
Click to collapse
Hehehe. Nice idea, but I am not here to make real money. It is ok, all the important functionality is and will always be free in my app.
Thanks
Andi
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
[FONT="]Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read the [/FONT]documentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Lord Boeffla said:
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read thedocumentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Click to expand...
Click to collapse
Wow thanks for this I was waiting for that !! So far so good great with many many options !!
Regards thanks for your hard work Lord boeffla ?
Hi Lord, ur kernel is amazing. Nice work
Bug on RR Remix Unofficial Version ( with OOS cam )
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
BFMSAND said:
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
Click to expand...
Click to collapse
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Lord Boeffla said:
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Click to expand...
Click to collapse
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
BFMSAND said:
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
Click to expand...
Click to collapse
This would most probably require a special change in the kernel, which is RR specific.
I am sorry, but I will not do that as it violates my objectives.
Also I would never install RR myself, so I could not even do it for analysis.
Sorry, no fun.
Andi
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
katinatez said:
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
Click to expand...
Click to collapse
Thanks my friend. Already merged.
I expect to ship an updated kernel out soon... just waiting for the latest nightly which is due today.
Andi