** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the other OnePlus (One and X) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, LineageOS, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use LineageOS/CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
It is reported to NOT work fine specifically on Resurrection Remix roms, also some Seraph based roms are not compatible.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14 kernel - Click here
Change log for CM13 kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.50 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
The two CPUs (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and hotplug profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
Additional schedulers: fiops, bfq, sio und zen
Hotplugging done by using stock core_ctl method
Many Hotplug tweak profiles (default are: little CPU always runs on 4 cores, big CPU runs on between 2 and 4 cores based on load)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable only)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable, input boost switch
No CPU and GPU overclocking (also not planned)
No CPU and GPU voltage interface (also not planned)
GPU underclocking to 27 MHz possible
GPU boost implemented (4 levels)
msm_adreno_tz and simple_ondemand tweaked to better utilize low frequencies
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
BCL (battery current limit) driver switchable (default is on)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Thermal engine profiles (in system Tweaks section)
Kernel logger (dmesg) configurable
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
USB charge rate bumped up to 900 mA
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms activated to be used
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Rom flash survival mode configurable in Boeffla-Config
Google gcc 4.9 toolchain (64 bit) used for best stability
Always using latest CM13 Initramfs
Always based on latest CM13 kernel sources (http://github.com/CyanogenMod/android_kernel_oneplus_msm8994)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using LineageOS/CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.50 or higher for the OnePlus 2 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Last change logs:
LineageOS 14.1
http://kernel.boeffla.de/oneplus2/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/oneplus2/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
.... And its here! Finally landed for cm13 for our beloved op2. Thanks a ton @Lord Boeffla
Sent from my ONE A2003 using Tapatalk
Wohooo...
It's party time for op2 users
Awesome! Will shift to CM13 soon to just try this kernel.
Wooohoo. Awesome.
If only my BSNL allowed me to download that right now ???*
Beer time! :highfive:
3FN59977869854618
Fantastic! Waiting for this day!
I have not found any issue in Kernel but a typo in OP. You've mentioned OPX instead of OP2 in temporary alpha notice
Sent from my Amazing OnePlus 2
mido25 said:
I have not found any issue in Kernel but a typo in OP. You've mentioned OPX instead of OP2 in temporary alpha notice
Sent from my Amazing OnePlus 2
Click to expand...
Click to collapse
Good catch, and easy to correct. Thanks for spotting.
Andi
Since this is alpha will your config app not offer updates for the kernel? (The "Pro" version that is )
djsubterrain said:
Since this is alpha will your config app not offer updates for the kernel?
Click to expand...
Click to collapse
It will in future. Once I want to push a new release, the app does it of course.
Why do you ask? Any evidence or only curious?
Andi
Lord Boeffla said:
It will in future. Once I want to push a new release, the app does it of course.
Why do you ask? Any evidence or only curious?
Andi
Click to expand...
Click to collapse
Just curious and because everyone seems to want "deltas" now, lazy folk
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Dinjesk said:
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Click to expand...
Click to collapse
No, it is a public alpha, so all limitations of closed alpha are obsolete for it.
Andi
Dinjesk said:
fantastic news this release. finally we can openly talk about it and share it.
ps. @Lord Boeffla does it still need the pro version off your app?
Click to expand...
Click to collapse
You need pro version to use tunables in governors. I bet profiles will be up soon in next few days.
Sent from my Amazing OnePlus 2
mido25 said:
You need pro version to use tunables in governors. I bet profiles will be up soon in next few days.
Sent from my Amazing OnePlus 2
Click to expand...
Click to collapse
you can still use old profiles, i am using this one since the alpha1 test
http://forum.xda-developers.com/showpost.php?p=65968195&postcount=422
Does this mean OOS 3.0 version is coming soon?
alexferdean said:
Does this mean OOS 3.0 version is coming soon?
Click to expand...
Click to collapse
not before oneplus will release kernel sources.
question has been asked to much!!
Related
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the Samsung devices area, where I provide my kernels already for more than two years to Galaxy S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod / CyanogenOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
1) When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
2) Do NOT use TWRP's function to root your device after a clean rom flash!!! The installed supersu version is not up to date and may cause a bootloop with latest COS/CMs kernels !!!
3) Make sure you flash the correct kernel version, depending on whether you use cm11s stock or genuine cm11, COS13.0, COS12.1, COS12.1.1 or genuine CM13 !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Saying that, the Boeffla-Sound app in Play Store is not designed to work on the OPO, neither was it developed by me, hence it will never work on the OPO ever. Boeffla-Config is the way to go here !!!
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app.
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
Change logs can be found at the first page of the kernel homepage:
www.boeffla.de
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Additional governors: zzmoove, intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, pegasusq, nightmare, lionheart
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones and speaker volume configurable)
zRam (1-4 logical devices)
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency configurable, touch boost switch
Swipe2Wake gesture implemented
Swipe2Sleep - 3 gestures implemented
Boeffla generic wakelock blocker V1.1.0 (documentation)
CPU Overclocking up to 2.88 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support with fixed simple_ondemand
Show GPU frequency usage per frequency in Boeffla-Config
Panel partial updates reverted to avoid graphical glitches
Last CM12 touchscreen firmware reverted as it does not work properly for some users
Color control to adjust RGB color space + inverted mode
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported (default is off, new Mattiadj tweak set included)
Android logger (logcat) configurable (depending on rom)
Kernel logger (dmesg) configurable
Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support (module, do not mount inside /data)
NFS support (module)
exFat opensource support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
Module support in general activated in Kernel
TCP Congestion changed to Westwood
Swap supported (but not recommended, use zRam instead)
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Insecure kernel (adb has root privileges)
Automatic EFS backup
Kernel survival mode by Boeffla-Config app to survive CM rom flashes (not CMs however)
Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
Integrated full busybox 1.23.1 (own compilation)
Auto-Root by kernel possible by request (latest su included)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Kexec hardboot supported
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Google gcc 4.8 toolchain used for best stability
Always using latest Initramfs
Always based on latest OnePlus One kernel sources
Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are on stock cm11s or genuine cm11 !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.1.48 or higher for the OnePlus One Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change logs:
CM14.1
http://kernel.boeffla.de/bacon/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/bacon/boeffla-kernel-cm/cm13.0/changelog.htm
COS13.1
http://kernel.boeffla.de/bacon/boeffla-kernel-cms/cm13.1s1/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-one/general/unofficial-boeffla-kernel-profile-t2998145
--- reserved 2 ---
Yes a new Kernel. Can never have too much Kernel love for the OPO. WIll check it out ASAP. Thank you sir!
Omgggg i loved your kernel from s3, can you port zzzmove?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Omgggg i loved your kernel from s3, can you port zzzmove?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
Hi,
oh yes, zzmoove is already in
Thanks to master @ZaneZam, who was working together with me in the past 2 weeks on that topic.
If you loved my kernel already on the S3, you will even love you have the same kind of "structure" around the kernel. Same config app, same comfort functions there etc etc.
So, ... enjoy
Andi
waaaaaa... my lord.... welcome .... missed u from S3....... so happy...
are we expecting eargasm again ???
Lol, how nice... many "old S3 chaps" here. Good to see you again guys
Andi
Lord Boeffla said:
Hi,
oh yes, zzmoove is already in
Thanks to master @ZaneZam, who was working together with me in the past 2 weeks on that topic.
If you loved my kernel already on the S3, you will even love you have the same kind of "structure" around the kernel. Same config app, same comfort functions there etc etc.
So, ... enjoy
Andi
Click to expand...
Click to collapse
Nice , are you going to port it to cm11?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Nice , are you going to port it to cm11?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
Not in my plans as I have only one device. So the same goes as long time ago for the S3 and n8000.
One device = only the "official" firmware. This is still my golden rule of thumb
If enough people help me to get a second device, it would change of course.
Andi
Lord Boeffla said:
Not in my plans as I have only one device. So the same goes as long time ago for the S3 and n8000.
One device = only the "official" firmware. This is still my golden rule of thumb
If enough people help me to get a second device, it would change of course.
Andi
Click to expand...
Click to collapse
I have invites, i can give you one if you want to buy a second device. Why you dont switch to other roms? You dont lose warranty
Sent from a OnePlus One with Vanir ROM and AK
welcome, it's nice to find you. now we will see some good!
_Beni_ said:
I have invites, i can give you one if you want to buy a second device. Why you dont switch to other roms? You dont lose warranty
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
I know.
But I loose features, and like for a daily driver phone to stay on the official firmware the vendor provides. That is my concept for more than 3 years now and I was always good with it.
So, no intention to change.
The question from other side is (although it is OT): What does CM provide me which CM11s does not have?
I am not missing anything, thats my point
It is not about invites, but paying another 300 bucks is not possible for me this year anymore (spent around 15 k€ for relocations, my car got stolen in February and so on... was an expensive year for me).
Andi
Lord Boeffla said:
I know.
But I loose features, and like for a daily driver phone to stay on the official firmware the vendor provides. That is my concept for more than 3 years now and I was always good with it.
So, no intention to change.
The question from other side is (although it is OT): What does CM provide me which CM11s does not have?
I am not missing anything, thats my point
It is not about invites, but paying another 300 bucks is not possible for me this year anymore (spent around 15 k€ for relocations, my car got stolen in February and so on... was an expensive year for me).
Andi
Click to expand...
Click to collapse
damn... sorry to hear that..
reyscott1968 said:
damn... sorry to hear that..
Click to expand...
Click to collapse
Well, no worries.
Sometimes life is a b**tch
But all good now. Just not the money left for another OPO at the moment.
Especially as I still am not sure whether I should also get a Galaxy S5 on day.
Andi
Lord Boeffla said:
Well, no worries.
Sometimes life is a b**tch
But all good now. Just not the money left for another OPO at the moment.
Especially as I still am not sure whether I should also get a Galaxy S5 on day.
Andi
Click to expand...
Click to collapse
Lets leave samsung , they dont want good thirdparty developers.
Now downloading stock opo image, never used the orgininal cm11s . Everyfeature from s3 is also in Opo kernel?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Everyfeature from s3 is also in Opo kernel?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
No, of course not.
This is technically impossible. There are things in Samsung that do not exist on this hardware (e.g. big parts of boeffla-sound).
And vice versa.
And some are not needed as they are included here by default (e.g. touch wake etc).
If you look carefully at the feature list, you can spot the differences
Andi
Pretty sure you can get the kernel to work with AnyKernel, but of course, when you do this, YMMV. Since it's designed to work best with CM11s, it might perform worse on other ROMs (and then there comes the complaints, bugs, issues, etc.). Besides, I don't see any need for any other ROMs than CM11s. It gives you everything you need.
ive used that kernel until last week on my s3, it was by far the best.
(boeffla sound was great)
hoping for a cm11 version sooner or later for the 1+1 :victory:
I have used your kernel on my s3 for along time, it's awesome! Very happy to see your work on OPO.
Just ask one question, I'm using f2fs with ak kernel on my OPO now, so does this kernel support f2fs filesystem? Cuz i didn't find it on your feature list..
sorry for my english
Hi all,
some of you know me from the OnePlus One or the Samsung devices area, where I provide my kernels already for more than two years to Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Finally I got an OnePlus Two a few weeks ago and decided to start a kernel also for this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock 2.x or 3.x, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to LineageOS, CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for OxygenOS 3.x kernel - Click here
Change log for OxygenOS 2.x kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.2.42 or higher !!!) configuration app
(get it from http://www.boeffla.de) to configure all kernel settings
The two CPUs (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and hotplug profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
Additional schedulers: fiops, bfq, sio und zen
Hotplugging done by using stock core_ctl method
Many Hotplug tweak profiles (default are: little CPU always runs on 4 cores, big CPU runs on between 2 and 4 cores based on load)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable only)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable, input boost switch
No CPU and GPU overclocking yet
No CPU and GPU voltage interface (will probably never come to save me support work)
GPU underclocking to 27 MHz possible
msm_adreno_tz and simple_ondemand tweaked to better utilize low frequencies
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
Vibration control
Haptic feedback control for gestures
BCL (battery current limit) driver switchable (default is on)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Thermal engine profiles (in system Tweaks section)
Kernel logger (dmesg) configurable
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
USB charge rate bumped up to 900 mA
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms activated to be used
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always using latest Oxygen OS Initramfs
Device tree build from kernel sources for future options on frequencies and voltages
Always based on latest Oxygen OS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8994)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
a CAF based kernel
anykernel method to use the ramdisk of the installed rom
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.03 or higher for the OnePlus Two Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Ak
* Yank555
* Hardcore
* Chainfire
* Netarchy
* Gokhanmoral
* Simone201
* Entropy512
* Faux
* Savoca
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Special thanks
Also I want to thank xda user @magnamentis for the ongoing testing to iron out the stability issues of the first alphas. He was doing that always taking the risk to "ffy" his brand new OP2.
Special thanks as well to @ZaneZam to pinpoint the issue during my absence as I was on business trips most of the time in the past weeks.
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
OOS3.0.x
http://kernel.boeffla.de/oneplus2/boeffla-kernel-oos/oos3xx/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
I am just waiting for the source code push to github to finish.
Then I will officially open up the thread and release the first beta to all of you.
Andi
Online
Hi all,
kernel is now officially released in version 1.0-beta1.
Download link, as always, on the kernel homepage.
Some notes again:
Make sure you have latest Boeffla-Config app running -> 2.02.03 !!!
This is the very very very first kernel version, so expect bugs or issues
Please be nice when you have an issue, this OP2 kernel costed me more grey hairs already than all other kernels I ever built together
Let the fun begin.
Andi
Awesome!! As stated there's no gpu over clocking, however I don't play games on my phone, will I be able to downclock the gpu?
Finally will try and report if any bug welcome to the opt forums andi i was waiting for you (really)
Alvin Vesper said:
Awesome!! As stated there's no gpu over clocking, however I don't play games on my phone, will I be able to downclock the gpu?
Click to expand...
Click to collapse
Downclock should work, yes.
Andi
Thanks a lot Andi!Had an awesome experience with the test kernel.Gonna flash this soon
Tapped from my ❶+❷
Downloading noww
I'm excited to finally try out this kernel. I've always stumbled upon threads that mentioned this kernel and since I've had my Nexus 6, I never got the chance to try this kernel out. But now that I joined the OnePlus 2 family, I can finally see what this kernel is all about!
Crackdroid said:
I'm excited to finally try out this kernel. I've always stumbled upon threads that mentioned this kernel and since I've had my Nexus 6, I never got the chance to try this kernel out. But now that I joined the OnePlus 2 family, I can finally see what this kernel is all about!
Click to expand...
Click to collapse
Sure, just for expectation management: Do not expect too much for the start now.
The msm8994 soc development is quite fresh, as well as the device.
So I am not really far where I want to be in future in terms of features etc.
But stuff will come over the time, as it was with the OPO kernels and the S5, S3, Tab 10.1 kernels etc.
Andi
Lord Boeffla said:
Sure, just for expectation management: Do not expect too much for the start now.
The msm8994 soc development is quite fresh, as well as the device.
So I am not really far where I want to be in future in terms of features etc.
But stuff will come over the time, as it was with the OPO kernels and the S5, S3, Tab 10.1 kernels etc.
Andi
Click to expand...
Click to collapse
That's definitely understandable and patience is key so there's no rush at all. Thanks for your hard work thus far!
I flashed it fine but there is no apk in the config V-2 download, its just a zip. am I missing something?
Crackdroid said:
That's definitely understandable and patience is key so there's no rush at all. Thanks for your hard work thus far!
Click to expand...
Click to collapse
Absolutely.
For future projection, the functionalities should be pretty much what I have in my OPO and S5 kernels one day. This is my goal.
Andi
Quizo said:
I flashed it fine but there is no apk in the config V-2 download, its just a zip. am I missing something?
Click to expand...
Click to collapse
You need to download the app from here:
http://boeffla.df-kunde.de/bc/
(note, it MUST be an apk. if you download a zip, your browser does not interpret the mime headers correctly and you might use another browser)
Save it on your phone, install it manually.
Andi
@Lord Boeffla
Is it possible (in future of course) to control more paramters of audio chip? (Like in your kernel for i9300 for example)
rascal0pl said:
@Lord Boeffla
Is it possible (in future of course) to control more paramters of audio chip? (Like in your kernel for i9300 for example)
Click to expand...
Click to collapse
Most likely no.
See question 2 in FAQ section:
http://www.boeffla-kernel.de/index.php/faq
Andi
Deleted
great... any possibility to add charging control to increase charging speed.. the only downside of this darn phone.. it feels like it takes for ever to charge... !!
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3, OnePlus 2, OnePlus One, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, LineageOS, Cyanogenmod, Omnirom etc.)
Thanks to generous supporters, I now own a second OnePlus 3T device which allows me to also provide a LineageOS kernel for this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use LineageOS or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14.1 kernel - Click here
Known issues
None
Features
Note: This kernel only runs on LineageOS 14.x for the OnePlus 3T - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.33 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
Configurable GPU boost (low, medium, high)
No CPU overclocking - not planned as well for next future, the OP3T is fast enough with standard frequencies
No GPU overclocking, no CPU and GPU voltage interface - this will not come in future as well as I do not like it
CPU core profiles to restrict number of CPU cores being used (the OP3T does not hotplug based on load)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker), microphone gains (only experimental)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
USB fast charging enabled (up to 900 mA instead 500 mA)
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Support for "pocket mode" - check out Boeffla Pocketmode app on Google Play Store if your rom has no pocket mode support
Boeffla touchkey LED control
Boeffla generic wakelock blocker V1.1.0 (documentation)
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys and home button are locked as long as screen is in use (touched) for better usability - configurable
Swap supported
Support for extended slider functions on certain custom roms
Remove verifiedbootstage flag to avoid triggering safetynet
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.26.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest official LineageOS kernel sources (http://github.com/LineageOS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using LineageOS or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.33 or higher for the OnePlus 3T Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to supporters
Many thanks to the following supporters, that helped in funding an additional device to allow development of this kernel for the OP3T (chronological order:
ReAnimat, midoclaze, owen g., DJSubterrain, ArminT, w0lf, f616, TGX03, ScratMan, matze779, nihilista, Kirahvi, Ingo, Raimu, albireox, #lopamo72, timobayl, Alienrobot, Selim B., Ukcain, Christian B., Carina S., schvagier, Michael L., Jason K.
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1:
Change log
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Good morning,
very first version 2.0-beta1 is out.
Expect bugs (but not too many as the kernel is very much similar to the OP3 LineageOS kernel).
Anyways enjoy
Andi
I just got the device and thought I would not unlock bootloader for some time. Damn it...
saurabh40629 said:
I just got the device and thought I would not unlock bootloader for some time. Damn it...
Click to expand...
Click to collapse
Come on. Without unlocked bootloader you have no fun
But I understand your point, it would be nice to have a device really being vanilla and unrooted.
Andi
Working nicely so far
so far so good just experiencing slow charging and heating while charge is it only me ? it takes around 1hr 49min to charge from (0 to 100)
finally ! for 3T lineage based. Welcome.
i was waiting for this, i wanted to see your kernel in action
Thank you very much, for this Kernel. This delivers the ultimate experience to the OP3T in my opinion!
Dhairya said:
so far so good just experiencing slow charging and heating while charge is it only me ? it takes around 1hr 49min to charge from (0 to 100)
Click to expand...
Click to collapse
Charging drivers are 100% original, no changes. Also nothing else changed that would cause that.
And yes, I do not face that myself at all.
Andi
Lord Boeffla said:
Charging drivers are 100% original, no changes. Also nothing else changed that would cause that.
And yes, I do not face that myself at all.
Andi
Click to expand...
Click to collapse
will try with a clean flash
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
Haven't heard of it. Do you have a link to it ?
EDIT:
Found it
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
Not by default: my rom does not change filenames, since it comes only with 3t blobs. You can either copy the files to their new names and go ahead (not tested), or you can build boeffla kernel yourself (very easy with @Lord Boeffla's provided scripts!) reverting the filename commit (tested with beta1 git status, I see no reason at all why current git shouldn't work).
BTW: @Lord Boeffla: thanx foe your efforts. Following your git with curiosity!
I get soft reboots on my OP3T on the official 20170223 build, when I try to use the gestures ("V" for Flashlight). Some else having this issue?
akoyaxd said:
I get soft reboots on my OP3T on the official 20170223 build, when I try to use the gestures ("V" for Flashlight). Some else having this issue?
Click to expand...
Click to collapse
I´m on latest RR and have no issues with gestures.
redukt said:
I´m on latest RR and have no issues with gestures.
Click to expand...
Click to collapse
Interesting.
But I definitive have this issue only if I have the boeffla kernel installed.
Edit: After wiping my system partition and reflashing LineageOS, SU, Snapdragon Camera and the kernel, it works fine.
bu44er said:
Would this kernel work with Nvertigo's 3T optimized build. Has anyone tried it?
Click to expand...
Click to collapse
nvertigo67 said:
Not by default: my rom does not change filenames, since it comes only with 3t blobs. You can either copy the files to their new names and go ahead (not tested), or you can build boeffla kernel yourself (very easy with @Lord Boeffla's provided scripts!) reverting the filename commit (tested with beta1 git status, I see no reason at all why current git shouldn't work).
BTW: @Lord Boeffla: thanx foe your efforts. Following your git with curiosity!
Click to expand...
Click to collapse
If you want to use boeffla kernel on my rom read this.
nvertigo67 said:
If you want to use boeffla kernel on my rom read this.
Click to expand...
Click to collapse
I'll stick with the kernel that ships with your ROM. I don't really know why I wanted to use a custom kernel, it's not like the ROM isn't quick as is to be honest.
Thank you for the advice tho.
*** This kernel is now end-of-life and not supported nor actively developed anymore !!! ***
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3T, 3, 2, one and X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus 5 device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
To add: A community build is NOT an official build supported here. If you use a community build and have issues, don't complain or even report.
Important notes
Read first, especially when you are new to my kernels:
http://wiki.boeffla.de
Boeffla-Kernel uses the anykernel concept = Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting change log...)
Change log for OxygenOS 5.x.x kernel - Click here
Change log for OxygenOS 4.x.x kernel - Click here
Known issues
none known
Features
Note: This kernel only runs on OOS 4.x.x for the OnePlus 5 - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: zzmoove, blu_active, impulse, cultivation
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
Underclocking CPU and GPU supported
No CPU and GPU overclocking (turned out to be slightly instable)
No CPU and GPU voltage interfaces (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Boeffla generic wakelock blocker
Control haptic feedback of gestures (except fingerprint)
Haptic feedback intensity control (from 0 to 25, with 25 being 100%)
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Wireguard supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Fully supports OOS device encryption, but does not force it
Integrated full busybox 1.27.2 (own compilation)
Compatible with systemless root
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8998)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app Boeffla-Config V2 from the downloads section on www.boeffla.de.
You need at least version 2.4.38 or higher for the OnePlus 5 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* arter97
* Grarak
* Entropy512
* Faux
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
OOS5
http://kernel.boeffla.de/oneplus5/boeffla-kernel-oos/oos5xx/changelog.htm
OOS4
http://kernel.boeffla.de/oneplus5/boeffla-kernel-oos/oos4xx/changelog.htm
--- Reserved 2 ---
Boeffla-Universe !!!
Very first public beta version is now released for the OnePlus 5, OOS version.
Please note: Expect bugs, the kernel is brand new and only 48 hours "old".
Also please carefully read the opening post as you need to be aware of some things, especially the thing about disabling battery optimisation for Boeffla-Config app !!!
Also read first, especially when you are new to my kernels:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/troubleshooting
http://boeffla.de/index.php/support/support
Finally here we go:
Version 1.0-beta1
30.06.2017
First official build
Note: This kernel only runs on OOS 4.x.x for the OnePlus 5 - nothing else !!!
Note: You need at least version 2.4.38 of Boeffla-Config V2 to allow all functionalities to be available.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
as on OOS 4.5.x a suspected bug does not let the app do that for you although the app tries !!!
Features:
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: none yet, but planned
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
Underclocking CPU and GPU supported
No CPU overclocking and voltage interface, no GPU overclocking and voltage interface (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Fully supports OOS device encryption, but does not force it
Integrated full busybox 1.26.2 (own compilation)
Compatible with systemless root
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8998)
Enjoy
Andi
Welcome @Lord Boeffla...
Thanks for your great work...[emoji4]
And one more thing...
News for those planning to go for a OnePlus 5 in future with LineageOS
Go to: www.boeffla.de
Cheers
Andi
nice to see you here
Glad to see your support for Oneplus devices
Sent from my OnePlus5 using XDA Labs
Greetings from Potsdam
unrated87 said:
Greetings from Potsdam
Click to expand...
Click to collapse
Oh, someone from Potsdam here? That is funny. Greets back. First time someone from Potsdam is showing up on XDA to me.
R u planning to go to the Stadtwerke Fest this weekend? I might go tomorrow evening, depending on weather conditions
Cheers
Andi
Yeah I will go Saturday evening as well I would like to me the almighty Lord Boeffla
unrated87 said:
Yeah I will go Saturday evening as well I would like to me the almighty Lord Boeffla
Click to expand...
Click to collapse
Goodie. Let's see what we can do. As said, I make it very dependent on weather, so probably would not work out.
But hey, we can meet any time when there is nice weather somewhere, so many nice locations here
And sorry for the rest of the folks, back on topic now.
Andi
I'm up and running with new Kernel. Phone works much smoother now.
Thank you Andi.
Also I made small donation for your other project, to keep you up and running.
I encourage others to donate as well, every penny counts to keep our Lord busy with new OP5.
Cheers!!!
dcrnic said:
I'm up and running with new Kernel. Phone works much smoother now.
Thank you Andi.
Also I made small donation for your other project, to keep you up and running.
I encourage others to donate as well, every penny counts to keep our Lord busy with new OP5.
Cheers!!!
Click to expand...
Click to collapse
Cheers my friend, much appreciated.
Both the report everything is fine, as well as your kind donation for the new project
Have a great Friday, followed by a even better weekend.
Andi
Great to see you working here too. Loved your kernel on OnePlus x.
Sent from my ONEPLUS A5000 using Tapatalk
gouthamgoumi said:
Great to see you working here too. Loved your kernel on OnePlus x.
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
Then you will feel being "at home" straight away again
Andi
Addicted to ur kernel on op3. Now the thing gonna be same on op5 too.. ?
HatRiGt said:
Addicted to ur kernel on op3. Now the thing gonna be same on op5 too.. ?
Click to expand...
Click to collapse
Great.
Then let's do that new journey together again
@all: Have a great weekend, I am off for now, just checking from time to time during the weekend.
So please help each other in case known issues appear, especially the ones using my kernels already on older devices should be able to help out a lot
Enjoy the weekend
Andi
Glad to see you here Since Galaxy S3
great to see boeffla on OP5!
is it possible to deactivate the annoying charging light?
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3T, 3, 2, One and X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
Read first, especially when you are new to my kernels:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/troubleshooting
http://boeffla.de/index.php/support/support
Boeffla-Kernel uses the anykernel concept = Flash stock kernel of rom first (by just flashing LineageOS rom dirty over first)!
This kernel is ONLY compatible to LineageOS stock, nothing else !!!
If you are using a custom rom that bases on LineageOS, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is LineageOS stock.
It is not supposed to be compatible to OxygenOS, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation).
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting change log...)
Change log for LineageOS 14 kernel - Click here
Known issues
none known
Features
Note: This kernel only runs on LineageOS for the OnePlus 5 - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.54 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: zzmoove, blu_active, impulse, cultivation
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
Underclocking CPU and GPU supported
No CPU and GPU overclocking (turned out to be slightly instable)
No CPU and GPU voltage interfaces (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.1 (own compilation)
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest LineageOS kernel sources (https://github.com/LineageOS/android_kernel_oneplus_msm8998)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app Boeffla-Config V2 from the downloads section on www.boeffla.de.
You need at least version 2.4.54 or higher for the OnePlus 5 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* arter97
* Grarak
* Entropy512
* Faux
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1
http://kernel.boeffla.de/oneplus5/boeffla-kernel-cm/cm14.0/changelog.htm
--- Reserved 2 ---
Here we go - Kernel is released now. Thread open.
Let the fun begin
Andi
One more reason to flash lineageos
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
fjsferreira said:
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
Click to expand...
Click to collapse
Mmmm.
Quoting the change log:
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Click to expand...
Click to collapse
So... yes.
Andi
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
just landed in boeffla los kernel! Thanks!
finally finally ....on my way Andy <3
fjsferreira said:
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
Click to expand...
Click to collapse
Hehehe. Nice idea, but I am not here to make real money. It is ok, all the important functionality is and will always be free in my app.
Thanks
Andi
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
[FONT="]Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read the [/FONT]documentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Lord Boeffla said:
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read thedocumentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Click to expand...
Click to collapse
Wow thanks for this I was waiting for that !! So far so good great with many many options !!
Regards thanks for your hard work Lord boeffla ?
Hi Lord, ur kernel is amazing. Nice work
Bug on RR Remix Unofficial Version ( with OOS cam )
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
BFMSAND said:
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
Click to expand...
Click to collapse
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Lord Boeffla said:
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Click to expand...
Click to collapse
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
BFMSAND said:
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
Click to expand...
Click to collapse
This would most probably require a special change in the kernel, which is RR specific.
I am sorry, but I will not do that as it violates my objectives.
Also I would never install RR myself, so I could not even do it for analysis.
Sorry, no fun.
Andi
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
katinatez said:
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
Click to expand...
Click to collapse
Thanks my friend. Already merged.
I expect to ship an updated kernel out soon... just waiting for the latest nightly which is due today.
Andi