Related
I can no longer hold home to get to the task manager. Holding down home does nothing now and I can't figure out why or what I could have done to cause this. Restarting doesn't fix it. Anyone know how I can restore this function without reflashing? The last thing I did was install Xposed Framework with modules 'App Settings 0.4' and 'xMulti Window Mod 1.3' so I'm thinking that's what caused it but I'm not sure why.
ROM: Tweaked 2.4.1
Kernel: Stock
Your best bet is to try and disable the new modules in xposed. Or disable xposed all together Then reboot..... also there's nO need to post in multiple threads. Patience
Sent from my SGH-T889 using Tapatalk 4
deeznutz1977 said:
Your best bet is to try and disable the new modules in xposed. Or disable xposed all together Then reboot..... also there's nO need to post in multiple threads. Patience
Click to expand...
Click to collapse
Disabled the two modules and rebooted. That fixed it. Re-enabled them, rebooted, problem came back. Double checked and the modules are configured as instructed. Everything on my phone seems fine and working great except this one little issue and it's an annoying one. I don't want to give up this MOD so there must be a way to isolate this but I must admit I'm lost.
I've noticed on my gpe when I go to install an apk I've downloaded, I can't press install. It's not grayed out or anything, it's just not responding to the press. It's fixed by a reboot. Only mods I've made are gravity box and the optimized dalvik and bionic libraries. Any ideas why this is happening?
gunnyman said:
I've noticed on my gpe when I go to install an apk I've downloaded, I can't press install. It's not grayed out or anything, it's just not responding to the press. It's fixed by a reboot. Only mods I've made are gravity box and the optimized dalvik and bionic libraries. Any ideas why this is happening?
Click to expand...
Click to collapse
Turn off Lux, Screen Adjuster and other 3rd party color settings apps, I know it sounds dumb, but just do it. Then run the APK again. Install should work again.
How weird. Thanks
gunnyman said:
How weird. Thanks
Click to expand...
Click to collapse
Don't mention it.
All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
Update: TWRP install method added for those not using Magisk. Just flash the zip and good to go.
Magisk Module v2.1a: Update Sep 5, 2017
https://www.androidfilehost.com/?fid=817550096634797320
TWRP Install:
https://www.androidfilehost.com/?fid=889764386195918352
Thanks intall working
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs
Great Tweak mate! Thank you so much
I'm expecting an important call today, but will test thoroughly later.
ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
badcrow35 said:
Thanks intall working
Click to expand...
Click to collapse
I don't own a OnePlus 5, I have a 3 but I saw a Turkish text and decided to write. How did you get access to OnePlus 5? Have you imported it from abroad or are you living in abroad?
Brought with my friend from abroad UK
ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Click to expand...
Click to collapse
dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Can anyone confirm if the zip works?
dustintinsley said:
All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
https://www.androidfilehost.com/?fid=889764386195917884
Click to expand...
Click to collapse
Work like a charm wish everything went this easy
Awesome, works just fine. This has been driving me bonkers lol.
Working great! I use xxx rom with latest Magisk. Thx! :highfive:
dreams.sri said:
Can anyone confirm if the zip works?
Click to expand...
Click to collapse
I have not tested it as I use Magisk, but it should work. Worse case is that it will still not answer from notification. Should not cause any boot loop or anything like that. Have you tried the zip? There should be no issues with it, if you have issues please let me know so I can fix it...
Binary Assault said:
Awesome, works just fine. This has been driving me bonkers lol.
Click to expand...
Click to collapse
Same here man. It was driving me nuts. I'm kinda OCD so I had to figure it out. Glad others find it useful...
But OnePlus Dialer Is Better Than Google One ?
Krsambhav16 said:
But OnePlus Dialer Is Better Than Google One ?
Click to expand...
Click to collapse
Not sure that I agree, but to each his own...
Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?
Donald Nice said:
Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?
Click to expand...
Click to collapse
You can do it either way. I prefer doing it via Magisk, but either should work.
does it vibrate when the call connects?
dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Thanks for taking time to make it. Just tried and TWRP throws error 6.
Hi Folks -
Does anyone know a way to double tap the "lockscreen" to have the phone lock (or switch off screen display).
This is a very popular/common option in Custom ROMs. But I haven't been able to locate this independently.
I've tried Nova launcher for double tap to screen off, but that doesn't work on lockscreen. None of the apps on the playstore seem to work on the lockscreen.
This is a useful feature where in one can check the notifications on the lockscreen and switch off the screen without unlocking the phone.
Any suggestions would be much appreciated. Thanks in advance.
StatusbarSleep
iamjimmy said:
Hi Folks -
Does anyone know a way to double tap the "lockscreen" to have the phone lock (or switch off screen display).
This is a very popular/common option in Custom ROMs. But I haven't been able to locate this independently.
I've tried Nova launcher for double tap to screen off, but that doesn't work on lockscreen. None of the apps on the playstore seem to work on the lockscreen.
This is a useful feature where in one can check the notifications on the lockscreen and switch off the screen without unlocking the phone.
Any suggestions would be much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Hi, I'm using StatusbarSleep, a Xposed module for double tapping lockscreen to turn off.
Samuel Holland said:
Hi, I'm using StatusbarSleep, a Xposed module for double tapping lockscreen to turn off.
Click to expand...
Click to collapse
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
iamjimmy said:
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
Click to expand...
Click to collapse
Before you jump into the deep end, ask yourself if your need to pass safety net out weighs your desire to double tap. If you use android pay, probably not...
iamjimmy said:
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
Click to expand...
Click to collapse
"The Flash" has an awesome guide on how to get your phone set up. It's right here on XDA under our device. After you get magisk installed, look for the systemless Xposed module under downloads in the magisk app. Click on it and there will be a link for the Xposed apk that goes with the systemless version. Just make sure you have a backup, or factory image, or a way to recover your phone in case of a booboo. Hope this could help; there is some really nice tools & guides here on XDA under our phone's forum.
CyberpodS2 said:
Before you jump into the deep end, ask yourself if your need to pass safety net out weighs your desire to double tap. If you use android pay, probably not...
Click to expand...
Click to collapse
Thanks for responding.
I was thinking of setting up a dual partition with one slot rooted and the other non-rooted. So when I need to access android pay (or any other safety net app), I can just reboot and switch to the non-rooted slot. So after flashing factory img on both slots, flash magdisk+kernel of one slot and let the other not have magdisk.
Anyway, I think I would use the double tap lockscreen feature way more than I use Android pay. It also saves a lot of battery life. I'll search here for guide to install Xposed Modules? Is there anything specific for the Pixel 2 XL?
iamjimmy said:
Thanks for responding.
I was thinking of setting up a dual partition with one slot rooted and the other non-rooted. So when I need to access android pay (or any other safety net app), I can just reboot and switch to the non-rooted slot. So after flashing factory img on both slots, flash magdisk+kernel of one slot and let the other not have magdisk.
Anyway, I think I would use the double tap lockscreen feature way more than I use Android pay. It also saves a lot of battery life. I'll search here for guide to install Xposed Modules? Is there anything specific for the Pixel 2 XL?
Click to expand...
Click to collapse
there is a magisk version of xposed that you can switch off with a reboot. just an FYI since using it is probably easier than trying to dual boot
Samuel Holland said:
"The Flash" has an awesome guide on how to get your phone set up. It's right here on XDA under our device. After you get magisk installed, look for the systemless Xposed module under downloads in the magisk app. Click on it and there will be a link for the Xposed apk that goes with the systemless version. Just make sure you have a backup, or factory image, or a way to recover your phone in case of a booboo. Hope this could help; there is some really nice tools & guides here on XDA under our phone's forum.
Click to expand...
Click to collapse
Thank you. I already have Kernel, Magdisk etc installed. I was looking for instructions for the Xposed Module specifically and did not find a guide for that.
So basically after installing the Xposed Module from within magdisk, just installed Status bar to sleep? Is it as simple as that?
And for next month, while dirty flashing to the new factory images, can this module be uninstalled so that one is close to stock before flashing away? Thanks in advance.
slothdabski said:
there is a magisk version of xposed that you can switch off with a reboot. just an FYI since using it is probably easier than trying to dual boot
Click to expand...
Click to collapse
Oh Really? That is great. Do you know how to install this version? Thanks.
iamjimmy said:
Oh Really? That is great. Do you know how to install this version? Thanks.
Click to expand...
Click to collapse
the magisk module is in the mgisk manager repo. flash it, then install this xposed apk https://forum.xda-developers.com/attachment.php?attachmentid=4337506&d=1511193653
info from this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Or use the Nova Launcher which has an option for double tap to sleep.
slothdabski said:
the magisk module is in the mgisk manager repo. flash it, then install this xposed apk https://forum.xda-developers.com/attachment.php?attachmentid=4337506&d=1511193653
info from this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I was able to uncheck the module in Xposed installer and did reboot. But this does not help with Safety net. Maybe I'm doing something wrong.
I Installed XposedInstaller_3.1.4_Magisk.apk. From Magisk Manager modules installed Xposed Framework SDK 27.
Could not install StatusBarSleep from XposedInstalled since it force closed when I tried to install. So installed the module through the Xposed repository on the internet.
However if I uncheck the module in Xposed installer and uncheck Xposed framework in Magisk - and reboot. After doing this, still don't pass Safety net check.
Could you please tell me what I'm doing wrong. Thank you.
dvsk69 said:
Or use the Nova Launcher which has an option for double tap to sleep.
Click to expand...
Click to collapse
I use the Nova Launcher and double tap to sleep. But I really wanted double tap on lockscreen. This does NOT work in Nova Launcher. The double tap action only works in the launcher..
did u ever get this working or did you have to goto a custom rom?
Below two apps can help you:
https://play.google.com/store/apps/details?id=com.redmanit.lockscreen
https://play.google.com/store/apps/details?id=com.jordigordillo.dtswidget
Has anyone got this working? I've done everything and the new power menu appears and the Cards and Passes does show up in gestures for about 30 seconds and then disappears. When press the power button it only shows the new power menu and not the cards.
https://www.xda-developers.com/enable-quick-wallet-access-google-pay-pixel-android-10/#disqus_thread
Same issue here. I don't even get the option for cards and passes in gestures menu....
i had to reboot like three times and then the cards magically appeared. It's not something that works instantly.
qman66 said:
i had to reboot like three times and then the cards magically appeared. It's not something that works instantly.
Click to expand...
Click to collapse
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?
elreydenj said:
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?
Click to expand...
Click to collapse
no
Got it working, but my option to enable it appeared in a different place.
Maybe do a reboot, put your code in if you have one, and then just let the phone sit for awhile.
Sent from my Pixel 4 XL using Tapatalk
Curiousn00b said:
Got it working, but my option to enable it appeared in a different place.
Maybe do a reboot, put your code in if you have one, and then just let the phone sit for awhile.
Click to expand...
Click to collapse
What do you mean by a different place?
elreydenj said:
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?
Click to expand...
Click to collapse
I'm on a custom Kernal. Booted many times and the gesture appears but still disappears in a matter of seconds. Very frustrating.
warrencoakley said:
I'm on a custom Kernal. Booted many times and the gesture appears but still disappears in a matter of seconds. Very frustrating.
Click to expand...
Click to collapse
So am I. I wonder if there is a correlation between the custom kernel and the gesture not appearing.
warrencoakley said:
What do you mean by a different place?
Click to expand...
Click to collapse
Yours appeared above Flip to Shh and mines appeared at the bottom of the list.
Sent from my Pixel 4 XL using Tapatalk
elreydenj said:
So am I. I wonder if there is a correlation between the custom kernel and the gesture not appearing.
Click to expand...
Click to collapse
Well the dev didn't specify in his installation instructions that you needed to be on a stock kernal. The only requirement was to be in Android 10. I've tried a few reboots and nothing.
Curiousn00b said:
Yours appeared above Flip to Shh and mines appeared at the bottom of the list.
Click to expand...
Click to collapse
Ah ok. Very strange. Not sure what are or not the full requirements are for installation. It's a bit vague from the dev and no real support on it.
warrencoakley said:
Well the dev didn't specify in his installation instructions that you needed to be on a stick kernal. The only requirement was to be in Android 10. I've tried a few reboots and nothing.
Click to expand...
Click to collapse
You do have the SQLite module installed, yes? GPay fix as well?
1. Install SQLite Module
2. Install GPay Fix
3. Reboot
4. Install GooglePayPowerMenu Module
5. Reboot and wait it out some
Sent from my Pixel 4 XL using Tapatalk
Curiousn00b said:
You do have the SQLite module installed, yes? GPay fix as well?
1. Install SQLite Module
2. Install GPay Fix
3. Reboot
4. Install GooglePayPowerMenu Module
5. Reboot and wait it out some
Click to expand...
Click to collapse
This is what I have installed. My GPay has been working for a long time with these modules installed.
Do I need to do anything else?
The gesture just disappears after a reboot.
Working here :good:
Working fine here. I had to reboot 2 times, disable and re-enable the toggle in order to make it work. Now it runs perfectly fine
warrencoakley said:
This is what I have installed. My GPay has been working for a long time with these modules installed.
Do I need to do anything else?
The gesture just disappears after a reboot.
Click to expand...
Click to collapse
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Sent from my Pixel 4 XL using Tapatalk
Curiousn00b said:
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Click to expand...
Click to collapse
Ok I'll try and reinstall all those modules. Yes as they are scripts it may take a few minutes to run but they don't. Not sure if the permissions should be changed or correct. The creater has another module like this for the live caption which I installed and again are scripts and run perfectly so not sure what's going on. After multiple reboots it appears in gestures and just disappears and nothing happens. See attached.
TENN3R said:
Working fine here. I had to reboot 2 times, disable and re-enable the toggle in order to make it work. Now it runs perfectly fine
Click to expand...
Click to collapse
Did you have issues with the gesture toggle disappearing?
Curiousn00b said:
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Click to expand...
Click to collapse
Tried reinstalling all the modules again and toggling the switch on and off and while doing it in gestures again it just disappeared. No idea what's going on. Not sure if one of my modules is conflicting with this module or not? Just strange it's kind of the same script as live caption but just does not want to play ball