Hi guys,
I need some helps to fix my phone, here is what i did :
I used to have a custom ROM ( CM 11 by Spanorg ) and yesterday i wanted to downgrade to an official Stock ROM (B315)
I wiped out all data and system of my phone using TWRP recovery, then I installed stock recovery.
Next and in order to install my stock rom (b315) I had to first install the intermediatepack there my troubles started.
As recommended I formated my SDCard and created a folder named "dload" where I put the UPDATE.APP file of the intermediatepack
After reboot on download mode it doesn't work ! I have " Version list verify fail! " error message.
Same error is I try with the B315 stock ROM directly
worse I can't even install custom ROMS like my old one ( CM 11 by Spanorg ) : I get signature error
I can't even change my recovery software, when in booloader mode ( Volume down + power button ) My phone is unrecognized by my computer : "UNKNOWN USB COMPOSITE DEVICE".
Any idea on how i can fix this ?
nobody has a clue ^^ ?
finally it worked, I kept trying to access bootloader mode ( Volume down + power button ) without success until once i tried while my phone was connected to PC and Yooopi ! it was recognised and I manager to install a custom recovry
Related
Hi
So yesterday I was trying to install TWRP recovery in order to install Cyanogenmod 11 on Xperia S , I followed a tutorial on techglen, the problem is that now I only have the recovery on my phone , it boots instead of the system , the system files are still there but I can't boot on it , If i connect my phone to my computer I can't access the storage even if I mount it using TWRP
So i have some questions
Is my phone broken?
Instead of flashing a .elf file i flashed the .img instead , is that the source of the problem? ( i didn't do it on purpose , but i didn't pay attention :/ )
can i flash the boot.img of the old system to get it back on booting ?
If there's a way of pushing the CM11 into my phone and installing it would that fix my problem?
Can i use flash tool to flash my old system back ?
Long story short, I installed CWM and then downloaded one of the ROMS from this site.
It failed and now the phone is constantly stuck on the Huawei Logo.
I have put what i believe to be an official rom (B510.zip) on my sd card and booted into recovery using the power on and + volume.
I have then tried to install it but receive an error:
Status 7 failed to stat "/system/build.prop" No such file or directory
Installation aborted.
Please can anyone help?
daniel.locke6 said:
Long story short, I installed CWM and then downloaded one of the ROMS from this site.
It failed and now the phone is constantly stuck on the Huawei Logo.
I have put what i believe to be an official rom (B510.zip) on my sd card and booted into recovery using the power on and + volume.
I have then tried to install it but receive an error:
Status 7 failed to stat "/system/build.prop" No such file or directory
Installation aborted.
Please can anyone help?
Click to expand...
Click to collapse
Hello !
Sorry to say, you have a duty to be informed, before take the actions on your device
Now is to late, but next time, take time to documenting yourself to avoid any issues .
First, here is no working CWM for our P6 - you must use TWRP .
Second , if you have already a custom recovery installed on your device, you cannot flash a Stock Huawei Firmware !
On Generals or Q&A forum for P6 you will find all you need .
Best regards !
surdu_petru said:
Hello !
Sorry to say, you have a duty to be informed, before take the actions on your device
Now is to late, but next time, take time to documenting yourself to avoid any issues .
First, here is no working CWM for our P6 - you must use TWRP .
Second , if you have already a custom recovery installed on your device, you cannot flash a Stock Huawei Firmware !
On Generals or Q&A forum for P6 you will find all you need .
Best regards !
Click to expand...
Click to collapse
Hindsight is a great thing, but of course this does not fix my problem.
I have managed to connect to the phone via fastboot. I have downloaded what I believe to be a stock rom and tried to flash the boot.img: fastboot flash boot boot.img
FAILED (remote: partition does not exist)
I have also tried to flash system.img: fastboot flash system system.img
FAILED (remote: data too large)
Do you have a fix for this?
I have found a fix
Okay,
So I have actually found a fix for this problem.
If any user is facing the same problem as me; where they are just stuck on the huawei logo here is my fix:
Put the phone into fastboot mode: Power and Volume down (the phone has to be connected via USB)
Open fastboot: fastboot devices (this checks that the device is connected)
fastboot flash recovery recovery.img (I go this by downloading the stock rom from huawei's site and then extracted the recovery.img using the huawei update extractor).
The reason I had to reflash the recovery was because it was corrupt and I could not access it.
Finally, once this was complete, I then took out the sd card from the phone, made a folder within it called dloader and put in the UPDATE.APP from the extracted zip rom file (downloaded from huawei's site) )
I then turned the phone off and then loaded into recovery mode. This mode automatically then looks for the dloader folder, in which it located the UPDATE.APP.
The install then began, and after about 10 minutes the phone was no longer SOFT Bricked.
Hello everybody,
Here my problem :
I tried to install a custom rom, I failed. Now, my smartphone stay on the Asus logo screen. I tried to follow this - http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835 - to fix the problem, but when I connect phone and laptop, adb doesn't find the device.
If I continue and go in recovery mode (using TWRP), laptop can access the phone (I can see internal memory but not external).
And if I try the ADB sideload, there is no device again...
It's the first step, I don't see any other way to unbrick the phone...
Thanks in advance
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 be lucky your phone is recognized
Hello,
Frist, thank you for your answer. I had already tried this way but nothing. Finally, I fixed the problems (detect phone and unbrick phone).
1-In TWRP, I loaded recovery.img, boot.img and droidboot.img. Reboot in recovery mod, but I had the dead droid... so I pushed on power and volume up till I have a new screen.
2-In this part, I did a Wipe/Factory reset (useless I think), reboot in recovery mode (still dead droid). This time I selected the line "update with adb" (with an ASUS firmware). Then I had a message who told me update adb sideload. I did it and it installed the firmware. The smartphone reboot correctly.
Now, I have the same problem I had yesterday. In TWRP, my external storage isn't detected...
you use stock recovery or custom recovery, if you use stock recovery external-storage won't detected
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Edit : I guess custom, TWRP. It's why I don't understand why it doesn't allow me to mount SD card or doesn't detect this same SD Card.
Mara Udé said:
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Click to expand...
Click to collapse
i use twrp 3.0 too, but external sd detected. no need to put on external storage, you can flash Cm 13 through internal storage
if you want to install custom rom it's better if you make a backup first, so if happen you failed when installing new rom or maybe you don't like it (new rom) you can go back to stock rom through TWRP restore
Ok, failed again...
Try a different rom or redownload the rom it might have been a bad download.
The error message says there is no updater script in the zip meaning it can't install anything as the updater script tells what directories to install the files if I seen it correctly that is.
Sent from my ASUS_Z00AD using Tapatalk
Mara Udé said:
Ok, failed again...
Click to expand...
Click to collapse
maybe the CM 13 zip file you have download corrupted, try to re-download and re-flash it again. if still failed try another rom
( i'm using AICP Rom "based on CM 13 too") try it, it's awesome Rom ---> do clean install wipe all except internal storage and external storage
http://forum.xda-developers.com/zenfone2/development/rom-c-p-t3285951/post64645756#post64645756
http://opengapps.org/ ( select x86-6.0-nano )
Hi,
Sorry for this late answer. As I failed to install those roms (CM13, Bliss), I'm going to stop here and wait for the Marsmallow update. But I'm happy my phone isn't brik anymore.
Thank you all.
hello
i have a problem with my one plus 3
first of all i can access to the bootloader and the menu of the sideload
( it has : install from internal storage, install from adb, wipe data from cache , advanced and exit)
the phone wasn't root properly when it has nougat ( i saw this when i installed and execute super su ) ,
i installed and flashed recovery stock and twrp ( the most recent file)
but i forget root & unroot the phone , so i think it could have traces of the root ..
( for this reason appears dm verity is not started in enforcing mode and may not work properly ?)
on the other hand i can't enter on the twrp recovery ..
it appears the dm verity alert and it doesn't let me enter to the recovery , when i choose recovery the phone loads the dm verity again and later i'm in the menu of the adb sideload
what should i do ?
i bricked definitely the phone ?
thank you so much
I believe this problem happened to me before
try with blu_spark recovery it should work fine
https://forum.xda-developers.com/devdb/project/dl/?id=27655
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
sakout said:
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
Click to expand...
Click to collapse
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
sakout said:
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
Click to expand...
Click to collapse
Try to install original CN 20s from here: https://www.mediafire.com/file/3ktjygl15282hr6/X1_X800-CN-FN-BEXCNFN5902012221S-5.9.020S.zip/file
It will erase everithing! also recovery! so you will need to install TWRP again after this. It contains also firmware!
Here is also Cuoco92's tool v2: https://www.mediafire.com/file/6hs8fr17bioxxf9/Le1Pro_CN_CUOCO92_TOOLS_v2.7z/file
For transfering files to phone you can use an OTG cable +USB stick or through adb: https://www.themefoxx.com/2018/06/adb-file-copy-android.html