Hello to everyone. I need some help. I have installed lewa recovery and on this I had flashed the Cyanogenmod 11 with it. Right now I need some help. My Pc don't recognize ADB drivers on the Bootloader mod. And I need to flash the cwm . Any ideas are acceptable.
Flash recovery with Rashr.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=pl
Related
Hi,
I am using custom rom (CM11 unofficial) and I flashed the kernel with Franco Kernel r394. The installation went fine but now I cant boot into custom rom, stuck at CM logo. Of course I used just temporary CWM and now I have stock recovery.
Is there any way to flash stock kernel or what should I do?
I tried find simmilar topic to this but without succes. I appreciate any help and any answer.
Thanks
defusiq said:
Hi,
I am using custom rom (CM11 unofficial) and I flashed the kernel with Franco Kernel r394. The installation went fine but now I cant boot into custom rom, stuck at CM logo. Of course I used just temporary CWM and now I have stock recovery.
Is there any way to flash stock kernel or what should I do?
I tried find simmilar topic to this but without succes. I appreciate any help and any answer.
Thanks
Click to expand...
Click to collapse
Download the skip soft toolkit and do a fastboot flashing of stock google image of 4.3JWR66Y last official update (U can get the toolkit download that for you:good: ) and flash a custom recovery then do flash a new rom/kernel .
Ashtrix said:
Download the skip soft toolkit and do a fastboot flashing of stock google image of 4.3JWR66Y last official update (U can get the toolkit download that for you:good: ) and flash a custom recovery then do flash a new rom/kernel .
Click to expand...
Click to collapse
Device mode cannot be detected.
I couldnt reinstall the drivers properly because I cant even set the USB Debugging mode when I cant boot to rom. My PC doesnt recognize the phone. I tried install it even with "Nexus Root Toolkit". Before everything was fine, ADB and the fastboot.
BTW: Should I try to install it when the device is turned off, in recovery mode (still stock, odin mode) or when its trying to boot?
defusiq said:
Device mode cannot be detected.
I couldnt reinstall the drivers properly because I cant even set the USB Debugging mode when I cant boot to rom. My PC doesnt recognize the phone. I tried install it even with "Nexus Root Toolkit". Before everything was fine, ADB and the fastboot.
BTW: Should I try to install it when the device is turned off, in recovery mode (still stock, odin mode) or when its trying to boot?
Click to expand...
Click to collapse
Go to bootloader, flash latest cwm using fastboot, boot into recovery and reflash ROM..
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Go to bootloader, flash latest cwm using fastboot, boot into recovery and reflash ROM..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
My PC still cant see any device in Fastboot or ADB mode, I´ll try it again tomorow.
Still thanks guys.
Try to get into odin otherwise then flash all the pit and phone files from that u can get drivers installed from the skipsoft toolkit (latest one from mskip best one) then flash a custom .img recovery to recovery partition, then flash any custom ROM :good:
P.S : First install the drivers from the skipsoft toolkit **MUST**!!
Ashtrix said:
Try to get into odin otherwise then flash all the pit and phone files from that u can get drivers installed from the skipsoft toolkit (latest one from mskip best one) then flash a custom .img recovery to recovery partition, then flash any custom ROM :good:
P.S : First install the drivers from the skipsoft toolkit **MUST**!!
Click to expand...
Click to collapse
My nex is back!! Thanks guys very much!
For future googlers, this guide helped me too (only GSM): http://forum.xda-developers.com/showthread.php?t=2065470
Now the first thing I will do is flash CWM permanently to wont let this happen again.
Hey guys,
i installed on the device the B118CN from here: http://forum.xda-developers.com/showpost.php?p=47993092&postcount=3 so i can flash custom roms.
But now i cant boot into the bootloader to flash TWRP, it always stucks at the Huawei logo.
I tried booting with ADB and Quickboot.
Can someone help me?
/Edit: Just found an installer ap for CWM, at the moment it woks very well will try to install a rom now.
Hi guys!
I want to install CyanogenMod 11.0 on my HTC One X.
I had already installed TWRP (v. 2.4) and did not know how to uninstall it, so I installed the CWM over TWRP. Bad idea.
I installed CWM using ROM Manager, but it did not work very well. When I reboot into recovery I'm going to TWRP and not for CWM..
A mess!
So I wanted to erase both recoverys and install stock recovery, then install the correct recovery-6.0.4.5-endeavoru.img (The recovery .img for CyanogenMod 11.0).
Is that the correct way to proceed?
Is it possible to provide me a tutorial on how to delete the two recoverys and install the recovery sotck? Pls
Thanks guys!
You dont delete a recovery, just flash it via fastboot.
Ditch rommanager, it's useless !
Yes ROM Manager is useless.. but as seen here on Wiki: http://forum.xda-developers.com/wiki/ClockworkMod_Recovery I thought it would work..
So you suggest to flash the "recovery-6.0.4.5-endeavoru.img" via fastboot?
And what about the other recoverys? Are automatically deleted?
Thanks Mr Hofs for support!
Yes via fastboot the old recovery gets completely overwritten by the new one.
Nice! Thanks!
Hi Guys,
I got into a bit trouble with my Hongkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, when I was trying to copy the zip file using the adb push YOURROMZIP.zip /sdcard/ command, I got the no device found error. And my phone is stuck at HTC logo.
With the guidance of Thant, I have tried Clockworkmod 5.8.2.7 recovery and Philz recovery, but I got the same error when I tried to ADB side load rom in both recoverys.
Now I am totaly stuck. Does anyone know the boot.img in cyanogenmod stable rom contain, Kernal I assume? Is there anyway that I can flash the kernal of my old rom so I can at least get in Android?
My Hboot Screen
https://drive.google.com/file/d/0BwqQHN9e6x81bnBQTEQ0aUUyWFk/edit?usp=sharing
-----------------------
Problem solved, all the thanks go to Thant.
Flashed philz recovery 5.15.9, mount sd card, copy rom to sd card, flash again latest Philz and flash the rom.
---------------------
The photos are not available...also try in fastboot fastboot erase cache and try again to boot into recovery...just hold power button and volume -
And if command writing failed try another recovery and which hboot do you have?
Gesendet von meinem HTC One_M8 mit Tapatalk
mmp7 said:
Hi Guys,
I got into a bit trouble with my honkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, there is no way to get into recovery mode so now I have a phone that stuck in a screen with only HTC logo. Is there any way I can rectify this?
Many thanks In advance,
Ian
my fastboot screen
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to enter recovery from fastboot
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to flash clockworkmod, I got an error, command write failed, unknown error.
Click to expand...
Click to collapse
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Thant said:
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Click to expand...
Click to collapse
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
mmp7 said:
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
Click to expand...
Click to collapse
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Thant said:
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Click to expand...
Click to collapse
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
mmp7 said:
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
Click to expand...
Click to collapse
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Thant said:
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Click to expand...
Click to collapse
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
mmp7 said:
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
Click to expand...
Click to collapse
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Thant said:
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Click to expand...
Click to collapse
Thanks a bunch. It worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I recently installed CWM after unlocking my bootloader. But realized after that every ROM requires different recovery (boot.img in the roms). But to install custom ROM you have to flash boot.img and that's what I did with the help of flashtool, but after when I'm trying to boot into recovery it's not even starting! let alone booting into recovery! , I think I bricked my phone guys! How to solve it? Please help!
I tried flashing stock firmware ftf with flashtool, and it worked! Now my phone is back stock 4.1.2.
But still one doubt how did flashing boot.img that came with flashtool soft bricked my phone? did I do something wrong? Also that boot.img was of CM 12 that i was installing at that time. Was that because I flashed boot.img even after having CWM installed prior?
Did you flash the rom from 4.3?
*blink*
Ya, I flashed the CM 12 on 4.3. But when I flashed the kernel i.e. boot.img supplied by the this zip-- ( CM11 unofficial FXP-cm-12-20150203-UNOFFICIAL-z3c_2) zip my phone bricked. I think there was something wrong with the zip, Cos today I flashed new cm-12-20150209-NIGHTLY build and it worked!
Can we change the kernel from Cynogen recovery to CWM ? and can CM 12 work with CWM?
Neon-Flash said:
Can we change the kernel from Cynogen recovery to CWM ? and can CM 12 work with CWM?
Click to expand...
Click to collapse
Of course it can :thumbup:
Here:
http://forum.xda-developers.com/showthread.php?p=58515383
*blink*
Try fotakernel, use either cwm or twrp, they are permanent (until you flash the original fotakernel)