Hi,
I am using custom rom (CM11 unofficial) and I flashed the kernel with Franco Kernel r394. The installation went fine but now I cant boot into custom rom, stuck at CM logo. Of course I used just temporary CWM and now I have stock recovery.
Is there any way to flash stock kernel or what should I do?
I tried find simmilar topic to this but without succes. I appreciate any help and any answer.
Thanks
defusiq said:
Hi,
I am using custom rom (CM11 unofficial) and I flashed the kernel with Franco Kernel r394. The installation went fine but now I cant boot into custom rom, stuck at CM logo. Of course I used just temporary CWM and now I have stock recovery.
Is there any way to flash stock kernel or what should I do?
I tried find simmilar topic to this but without succes. I appreciate any help and any answer.
Thanks
Click to expand...
Click to collapse
Download the skip soft toolkit and do a fastboot flashing of stock google image of 4.3JWR66Y last official update (U can get the toolkit download that for you:good: ) and flash a custom recovery then do flash a new rom/kernel .
Ashtrix said:
Download the skip soft toolkit and do a fastboot flashing of stock google image of 4.3JWR66Y last official update (U can get the toolkit download that for you:good: ) and flash a custom recovery then do flash a new rom/kernel .
Click to expand...
Click to collapse
Device mode cannot be detected.
I couldnt reinstall the drivers properly because I cant even set the USB Debugging mode when I cant boot to rom. My PC doesnt recognize the phone. I tried install it even with "Nexus Root Toolkit". Before everything was fine, ADB and the fastboot.
BTW: Should I try to install it when the device is turned off, in recovery mode (still stock, odin mode) or when its trying to boot?
defusiq said:
Device mode cannot be detected.
I couldnt reinstall the drivers properly because I cant even set the USB Debugging mode when I cant boot to rom. My PC doesnt recognize the phone. I tried install it even with "Nexus Root Toolkit". Before everything was fine, ADB and the fastboot.
BTW: Should I try to install it when the device is turned off, in recovery mode (still stock, odin mode) or when its trying to boot?
Click to expand...
Click to collapse
Go to bootloader, flash latest cwm using fastboot, boot into recovery and reflash ROM..
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Go to bootloader, flash latest cwm using fastboot, boot into recovery and reflash ROM..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
My PC still cant see any device in Fastboot or ADB mode, I´ll try it again tomorow.
Still thanks guys.
Try to get into odin otherwise then flash all the pit and phone files from that u can get drivers installed from the skipsoft toolkit (latest one from mskip best one) then flash a custom .img recovery to recovery partition, then flash any custom ROM :good:
P.S : First install the drivers from the skipsoft toolkit **MUST**!!
Ashtrix said:
Try to get into odin otherwise then flash all the pit and phone files from that u can get drivers installed from the skipsoft toolkit (latest one from mskip best one) then flash a custom .img recovery to recovery partition, then flash any custom ROM :good:
P.S : First install the drivers from the skipsoft toolkit **MUST**!!
Click to expand...
Click to collapse
My nex is back!! Thanks guys very much!
For future googlers, this guide helped me too (only GSM): http://forum.xda-developers.com/showthread.php?t=2065470
Now the first thing I will do is flash CWM permanently to wont let this happen again.
Related
Hi. I want to back to stock rom and recovery on my Nexus 7 2013 Wi-Fi. Before this operation i lunched Full Driver Test. The device reboot into Fastboot but the NRT didn't recognize it. Was it cause by custom recovery TWRP? Now I'm scared to lunch Flash Stock + Unroot option.
Should I just lunch Restore Stock Recovery from Advenced Ultilities before flash stock and unroot option? Or how to do this without risk?
Please help.
Sorry for my english.
This is the driver you will need if you haven't installed it from the toolkit already.
http://developer.android.com/sdk/win-usb.html
It does not matter if the toolkit flashes the ROM image or recovery image first.
Ok, i installed drivers again using NRT and it recognized fastboot correctly. So now is a question. Does option Flash stock + unroot flash stock recovery?
Couter said:
Ok, i installed drivers again using NRT and it recognized fastboot correctly. So now is a question. Does option Flash stock + unroot flash stock recovery?
Click to expand...
Click to collapse
No, that flashes the stock ROM images. You use the other option to flash the stock recovery image. NRT explains to you what each option does by hovering your mouse over it and before taking any action.
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
badmaash said:
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
Click to expand...
Click to collapse
First install a temperory CWM recovery by Odin and via that install which ever permanent recovery that u want this method helped me and i m sure will help u too.
Hit thanks if it helped
1-Use Root Genius Application to One-click root your Grand i9082 (www.rootgenius.com) it's a windows app, (you need to install Grand i9082's drivers on your PC before rooting)
2-Download the Recovery's image (.img file) and transfer on device's SD card or internal memory
3-Download "Rashr" from Google Play
4-open Rashr
5-Make backup of stock recovery (incase something goes wrong)
6-Click Install recovery from storage
7-Select the Recovery's image (.img file) in Rashr and install your recovery
8-Reboot and enjoy!
Recovery Mode not working
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
I also have same problem......!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
I also have same problem..... Now what should I do...??? anyone plz help me.....!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
Flash recovery again, try using Rashr app. If not work, might want to try flashing thru Odin.
Sent from my GT-I9082 using XDA Free mobile app
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Troy67 said:
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Click to expand...
Click to collapse
Too old recovery you must to use TWRP6.0.1 or higer to be able to install CM11 becouse is KitKat based rom read the OP in CM11 thread and download correct TWRP or CWM. Try with this CWM6.0.4.8
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Troy67 said:
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Click to expand...
Click to collapse
are you flashed boot.img via fastboot?
Thant said:
are you flashed boot.img via fastboot?
Click to expand...
Click to collapse
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Troy67 said:
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Click to expand...
Click to collapse
go in fastboot and flash the boot.img. Then try to install the rom again
Thant said:
go in fastboot and flash the boot.img. Then try to install the rom again
Click to expand...
Click to collapse
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Troy67 said:
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Click to expand...
Click to collapse
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Thant said:
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Click to expand...
Click to collapse
I dont know how many times i've tried to do a system restore in cwm recovery this week and failed each time, but tonight i tried and after the 3rd attempt it worked.
My phone is back to normal again.
Will be using the wiki instructions when i try again.
Thanks for your help
Hello,
I was trying to flash the newest version of TWRP on my Note 4 by flashing the image within TWRP(as the instructions suggested). What I did not notice was that I had an older version of TWRP installed than the one recommended in the instructions. After flashing the image and reboots the phone enters the download mode, and I am not able to proceed into recovery mode.
I downloaded the newest version of odin and flashed TWRP using the AP mode. By utilizing the auto-reboot setting I was able to boot into the OS, and everything seems to work fine. However when trying to reboot into recovery I still get the download mode. Is there any way to fix this?
All answers are greatly appreciated.
Sorry for bump.
Anyone?
fezken said:
Sorry for bump.
Anyone?
Click to expand...
Click to collapse
Are you Rooted, or are you trying to root using this method? If you're rooted download flashify and download TWRP, or CWM, or Philz for the device and it should be successful. If it's not, please reply back and i can see what's going on.
Thank you for the reply. Yes, I am indeed rooted. I tried flashing TWRP through flashify, but my phone still enters download mode when rebooting after flash. "Could not do normal boot" in the top-left corner. To make the phone boot into the OS I have to flash TWRP through Odin. This solves the "booting into the OS"- part,but when I try to boot into recovery I get the download mode aswell. I am thinking that I might have to wipe everything and re-install TWRP and the custom ROM(emotion rom MM). What is the best way of doing this?
Jonas
Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one
ICosmin said:
Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one
Click to expand...
Click to collapse
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery
cbendixe84 said:
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery
Click to expand...
Click to collapse
i have already flashed twrp 3.0.2.2 but now I would flash stock recovery but when I try to install it and turn into it op3 show me only op logo and after a few seconds the screen become black.
your phone is bricked I'm assuming. there is a thread for that. that should work for you!
sahed01 said:
your phone is bricked I'm assuming. there is a thread for that. that should work for you!
Click to expand...
Click to collapse
No it isn't. Because I managed to put stock ROM into it via adb with push command and after I have installed it from twrp that works. My only problem is that i can't flash stock recovery.
i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance
varmasagiraju said:
i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance
Click to expand...
Click to collapse
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.
ICosmin said:
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.
Click to expand...
Click to collapse
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?
varmasagiraju said:
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?
Click to expand...
Click to collapse
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)
ICosmin said:
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)
Click to expand...
Click to collapse
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??
If this procedure doesn't you can download an older version of oxygen os and update it via ota. At the first attempt when you will try it will give you an error and at the second attempt It will download all the ROM again and it will reflash by itself
varmasagiraju said:
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??
Click to expand...
Click to collapse
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.
ICosmin said:
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.
Click to expand...
Click to collapse
Thank you.
Will let you know if it worked.
I had that problem.
Solution as follows, worked everytime for me: (I have not tried this method with the newest beta 8)
1. Flash OOS 3.2.6 firmware in twrp.
2. Reboot to fastboot and flash official oxygen os recovery downloaded from the OnePlus website. (This is still the old version for some reason, thus why it won't work)
3. Side load community build with oxygen os recovery, this will flash the new firmware back and update the recovery to be community build compatible.
4. Before rebooting erase everything (factory restore)
5. Reboot to OOS, finish setting up.
6. Turn on advance reboot in developer settings.
7. Reboot to recovery via the reboot menu. First time boot into the recovery may take sometime, but it has always worked for me.
8. After everything looks good, go ahead and OEM lock in fastboot, recovery should work as usual this time and format your phone
OP did you find a solution to this?? Im on the same boat as you