I have a stock H811 connected to a Kenwood head unit over Bluetooth. My problem is that I have no audio for media or phone unless I manually disconnect/reconnect (no audio on auto connect). Bluetooth audio works fine with an S4 and same head unit.
Edit: I tried clearing data/cache for Bluetooth & repairing.
Related
I have a LG Nitro HD running on AT&T. The phone came pre-loaded with 2.3.5. The bluetooth phone part works as I can make and receive calls with my car (Suzuki Kizoshi 2010), but the audio over bluetooth doesn't work. The phone part works as I can make and receive calls. This is very important for me to be able to play the audio over bluetooth as I have a long commute to work and like to listen to my music. Any help is greatly appreciated. Thank You.
It's been about a month and still no solution. Has anyone else come across this problem?
I do not have this problem. I have a Pioneer X930BT headunit in my car and my Nitro streams audio over bluetooth (A2DP) to it perfectly as well as phone calls.
Have you tried streaming Sirius or spotify over bluetooth? I found that the only app on the phone that streams audio to my car correctly is the pre-installed audio app that comes with the phone.
I can confirm google music and napster stream great over bluetooth. I have not used spotify or sirius for android.
Are you sure your car supports audio profile?
I stream spotify, tunein radio every day through bluetooth.
Spotify actually pauses when bluetooth connection is lost which is great for getting out of the car. I wish TuneIn would do it.
Sent from my LG-P930 using Tapatalk
I have had the same problem with my nitro, it will automatically connect the phone but the media (A2DP) seems to drop automatically after connection. I've found if I manually re-connect to the receiver both will stay connected.
(settings > Wireless & Network > Bluetooth settings > *tap device name*)
I, like you, use it every time I'm in the car so it's annoying but it's a fix until there is a valid solution like a update or properly built rom.
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
theoski said:
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
Click to expand...
Click to collapse
That seems to be your problem JoTomlin and Kaiser. Before I installed my new headunit in my subaru I had tons of issues with my captivate playing music over bluetooth because the car had seperate profiles for A2DP and handsfree. When I got my new headunit which has a single profile containing both A2DP and handsfree it all worked without headache on the captivate and now the nitro. This is a problem with your car stereo. If its anything like my subarus, it would prefer to connect to handsfree and it would have to physically disconnect handsfree to connect A2DP (I would have to manually connect via the bluetooth menu). I solved it by getting a tunelink bluetooth audio receiver so handsfree would connect to the stereo and to the tunelink at the same time. Eventually I got tired of that and bought a new headunit.
Apparently a lot of people have swapped out their factory Kizashi factory head units for something better. But again, you'll want to bug Suzuki about something like this.
FWIW, I can stream Pandora just fine over a VW headunit with factory bluetooth. I do have to sometimes to a reconnect/pair though.
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
JoTomlin509 said:
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
Click to expand...
Click to collapse
Did you factory reset after updating?
Ok, so here's the deal. I have a rooted T-mo G3 (D851) on a stock rom, out of the box it's been awesome to use with my Pioneer AVH-X2600BT head unit in my scooby. I was messing around with themes a short while ago and then the bluetooth stopped working intermittently. From what I can tell the mix-rate of the A2DP stream changes from 44k to 3hz and all you hear are beeps at multiple amplitudes. The beeps are playing out of the buffer in the head unit until it empties then it resets the connection to the phone. It still plays out these beeps until it's empty even if I disconnect the phone from the head unit.
I don't have this problem with two other iPhones. And previous to my screwing around, it'd work flawlessly since a bought it (launch day.)
Could I have screwed up a mixrate setting someplace? I do have a custom mixer xml for boosting headphone port and speaker audio but I never touched the settings for the bluetooth driver.
This behavior is intermittent and it matters very little what content I'm playing through it. I do notice that when this is happening, no metadata or control is capable through AVRCP either. (i.e. Pandora app can't connect to the phone, no album art, etc)
Sometimes it'll stop doing it and play normally for the rest of the session (drive) after a few minutes and everything is normal. Sometimes it doesn't do it at all and sometimes I can't get it work normally at all.
Here's a video showing the behavior:
http://youtu.be/qYuuTG01x1E
Reset your Bluetooth on your headunit and pair it again with all your bluetooth devices.
I had a similar problem with my LG G3 and my Pioneer AVH-8500 where my Pioneer will not recognize my LG G3 anymore but recognizes my Note 3.
I fixed the problem by resetting my Bluetooth on my Pioneer and had to pair all my devices back to it again.
You will have to look into your Pioneer manual on how to reset your bluetooth.
Edit: I just remembered something.
Did you happen to update or change your firmware.
Some KitKat firmwares are missing the Bluetooth Metadata and will not function properly.
Use autoaudio download it from playstore. This fixes my problem on metadata
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Vexamus said:
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Click to expand...
Click to collapse
How exactly did you reflash the bt radio? I have the same head unit and am having problems with it dropping the bt connection to my G3
I just got forced to upgrade my LG G3 to Android 5.0 and it completely screwed up my Bluetooth audio connection in my car.
Bluetooth sync to home audio playback is fine, but BTooth audio is completely corrupted with the Pioneer AVH-X2600BT.
I cant find the instructions on how to reflash my stereo firmware to reset bluetooth settings. I cleared my bluetooth devices in the stereo setup, but to no avail. Can you point me to instructions on a reflash?
I am having the same issue. I have 2 other bluetooth devices that my G3 will connect to and playback is fine for as long as I have battery life. But when connected to my Pioneer AVH-x2600bt, I get constant skipping after 2 minutes of playback. I can pause it for a couple of minutes and when I start playing again it's fine for another 2 minutes. I have done a hard reset on the Pioneer and reconnected my G3 but no change. I have unpaired and cleared all of the bluetooth data in my phone and reconnected, no change. All of the Kit Kat OS devices I have still work fine with the Pioneer but none of the Lollipop devices work. I emailed Pioneer, their reply was for me to take my deck to a service center. That will do no good. One of two things needs to happen, Google needs to update their bluetooth firmware or Pioneer needs to update the firmware for the AVH-x2600bt. Until one of those two things happen I guess I'll be using stone age technology, an auxiliary cable.
Thank you, that is all.
Hello
I can't sent the music to my car radio according to the version of Android. In version 5.0 with different kernel that doesn't work, and with 5.1.1 (blisspop) it works. I 'm preferred the custom rom because I like some features. Someone have a solution or an explanation of why?
I have a problem where I pair my bluetooth headphones and I get no audio when I try to listen to music. In fact I get no audio for anything when they are connected. They worked fine until today and I haven't installed any apps so I don't know what has caused it. I have unpaired, reconnected, rebooted and have cleared the data from bluetooth share, all to no avail. Does anyone have any idea's? I am on 5.1 GPE.
Have an issue with CM13 and 14.1 no phone option when connecting to car JVC bluetooth head unit. Media connects fine and plays audio but the head unit refuses to see the phone as a phone.
it works perfectly fine on OOS
does anyone have any ideas?
Lan3y said:
Have an issue with CM13 and 14.1 no phone option when connecting to car JVC bluetooth head unit. Media connects fine and plays audio but the head unit refuses to see the phone as a phone.
it works perfectly fine on OOS
does anyone have any ideas?
Click to expand...
Click to collapse
I've had the same problems. It's an issue with the LOS BT stack. I've created several unofficial versions of my favorite ROMs using a different BT stack that fixes this problem for me. Let me know if they work.
While playing audio on Car Stereo via A50's Bluetooth, The Audio got crackles and skips, even in receiving phone calls,
I have tried changes in developer options in Bluetooth menu, and also disabled battery optimization for Bluetooth but nothing changed :crying: Similar situation while playing in JBL Bluetooth speakers
At other side my old sony Xperia C3 D2502 is working awesome on same car Stereo.
Same problems
If you use powersaving mode disable it
Maybe the problem is from this option
You didn't mentioned which rom and baseband. I use BT with Anker BT headphones, Roidmi2S and used it with Roidmi1 and a Yatour Car unit without any crackles and pops. I'm on May update, XXUASE3, OXM CSC.