Related
Hi guys,
Planning to buy the m8 and root it. But should I be specific on the variants?
Im not from the US (The Philippines) so Most likely not gonna get atnt, sprint etc.
So my options are:
The international model
Emea (a friend of mine is selling his but it was bought in riyad, KSA)
Or the asian version (s801 2.5ghz)
Do they have like different model nos.? Different ruus / rom versions etc?
Had a bad experience when i bought a phone (m7 sprint wls) before, since im not from the us. Had limited roms available compared to the international version
Your input would really help
Sent from my HTC One
I would agree that you should not get a US variant. For one thing, they will be SIM locked. Another thing, the Sprint and Verizon versions are CDMA. Different software, and possibly different hardware (although its been discussed here, and not clear - but I would err on the side of caution and assume the hardware is different). So if your area does not use CDMA I would stay away from those variants.
All GSM versions, be aware that they can all be converted to another carrier variant once bootloader unlocked and S-off. So as long as you avoid the CDMA versions, you are good for ROMs.
I would suggest the version that supports your local 3G and LTE bands out of the box. But again, as long as you are willing to s-off the phone, you can change that in software. So if that is the case, I would just go with the best deal.
From what I understand, the Asian version is the same as any other GSM version, just with a slight overclock.
Well if you do go with a us carrier Verizon has the best coverage and thier phones are :not: sim locked. You can use them with any carrier anywhere. My second choice would be t-mobile
str8str said:
Well if you do go with a us carrier Verizon has the best coverage
Click to expand...
Click to collapse
The OP is from the Philippines. They aren't going to use a US carrier.
I would advise against CDMA variants for the reasons already mentioned.
redpoint73 said:
The OP is from the Philippines. They aren't going to use a US carrier.
I would advise against CDMA variants for the reasons already mentioned.
Click to expand...
Click to collapse
Thanks guys, I just want to be clear, so if I use a Rom or RUU on a GSM variant, as long as Im'm on S-Off / Unlocked Bootloader and/ or on SuperCID. I could use any Rom ./ RUU from different GSM variants (I checked the rooting guide for the M8 and is similar to the M7, so as far as unlocking the bootloader / root that I have an idea).
Do they have different RUUs at all??
Czai24 said:
I just want to be clear, so if I use a Rom or RUU on a GSM variant, as long as Im'm on S-Off / Unlocked Bootloader and/ or on SuperCID.
Click to expand...
Click to collapse
Yes.
Aside from the CDMA RUUs, which I wouldn't try on a GSM version unless you read definitive advice elsewhere that its ok.
Czai24 said:
Do they have different RUUs at all??
Click to expand...
Click to collapse
Only US versions have RUU, that I know of.
Yes you're right.
I thought all has ruus on it. But with supercid i could use any nandroid backup right? As long as its gsm
I think I will go for the Asian version (wwe right? Cause it has a higher clockspeed and updated s801) And go supercid and use international (gsm) roms. Will that work?
Sent from my HTC One
Czai24 said:
with supercid i could use any nandroid backup right? As long as its gsm
I think I will go for the Asian version (wwe right? Cause it has a higher clockspeed and updated s801) And go supercid and use international (gsm) roms. Will that work?
Click to expand...
Click to collapse
I believe that will work, yes.
WWE just means "world wide English". I think it refers to the Euro version.
Hello.
FIrst , i know there are 2 more threads ( or maybe more , i could only find 2 ) about this but they didn't made me understand my problem.
So I live in Europe and my M8 is an US M8 ( Canadian if i remember right) and because of that 4G isn't working here , in Europe.
Now my question is : Can I do something about this ? I'm s-off if that can help..
Thanks.
Check if your version of the M8 supports the 4G band(s) used by your carrier. If not, the band support can be changed by flashing the appropriate radio.
Also, make sure you are using the proper APN for your carrier. Sometimes carriers use a different APN for 4G enabled devices.
redpoint73 said:
Check if your version of the M8 supports the 4G band(s) used by your carrier. If not, the band support can be changed by flashing the appropriate radio.
Also, make sure you are using the proper APN for your carrier. Sometimes carriers use a different APN for 4G enabled devices.
Click to expand...
Click to collapse
Sorry but I'm a bit noob. How can I check if my M8 supports the 4G band used by my carrier? The APN is ok.
Sent from my HTC One M8 powered by ViperOneM8
freskeeeh said:
Sorry but I'm a bit noob. How can I check if my M8 supports the 4G band used by my carrier? The APN is ok.
Click to expand...
Click to collapse
1) Verify what version of the M8 you own
2) Check specs online to see what bands your M8 version is supposed to support
3) Find out what 4G band(s) your carrier uses
You haven't given much detail, and I don't know your knowledge base (what you do or don't know how to do). So I can only give general steps, and rely on you to ask specific questions on the steps above, as necessary.
Flashing the radio appropriate for your region/carrier is probably going to fix the problem. But I recommend you do the research above first, to first confirm that band support (missing in the device software) is the issue.
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
freskeeeh said:
my M8 is an US M8 ( Canadian if i remember right) =
Click to expand...
Click to collapse
Byt the way, you understand Canada is not a part of the US, right?
redpoint73 said:
1) Verify what version of the M8 you own
2) Check specs online to see what bands your M8 version is supposed to support
3) Find out what 4G band(s) your carrier uses
You haven't given much detail, and I don't know your knowledge base (what you do or don't know how to do). So I can only give general steps, and rely on you to ask specific questions on the steps above, as necessary.
Flashing the radio appropriate for your region/carrier is probably going to fix the problem. But I recommend you do the research above first, to first confirm that band support (missing in the device software) is the issue.
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
Byt the way, you understand Canada is not a part of the US, right?
Click to expand...
Click to collapse
Yeah , looks like my brain wasn't working when I wrote you later.
I have a T-Mobile M8 and their bands are 700 , 1700 , 2100. For my carrier I need 800, 1800 , 2600 so looks like I need to flash a radio.
I just did a research and found some radio here on xda but i don't know which one to download. ( If you can help me here i would be very thankful )
My phone is s-off so i'm alright , i just need to change my cid to supercid.
---
Yeah . I know Canada is not a part of the US.
Do you intend to run a custom ROM, or keep the phone stock?
I already have a custom ROM - ViperOne
@redpoint73
So can you help me in finding the radio for my M8 ?
If the latest Viper (version 4.x), I would suggest flashing the 4.16.401 firmware package. Not only to get the Euro radio (with the LTE bands you are looking for), but all the other firmware modules that correspond to the 4.16 software, for most bug-free performance.
http://forum.xda-developers.com/showthread.php?t=2696282
s-off is required (which you state you already have) to flash another region/carrier's firmware. Plus, you will need to change to the proper CID and MID.
---------- Post added at 10:57 AM ---------- Previous post was at 10:53 AM ----------
freskeeeh said:
@redpoint73
So can you help me in finding the radio for my M8 ?
Click to expand...
Click to collapse
Patience, I was typing!
Umm is that a different firmware ? Because I already have 4.16.401.10.
freskeeeh said:
Umm is that a different firmware ? Because I already have 4.16.401.10.
Click to expand...
Click to collapse
How are you determining that number?
redpoint73 said:
How are you determining that number?
Click to expand...
Click to collapse
Bootloader - OS
freskeeeh said:
Bootloader - OS
Click to expand...
Click to collapse
That isn't the firmware number.
The term "firmware" is a little confusing. On this device, when most folks say "firmware" (including the link I sent you) it refers to a package of modules including hboot, radio, WiFi, Bluetooth, and others, that DO NOT get flashed with the ROM (but are critical in the correct operation of the ROM).
Firmware does not in fact really have a "number", so referring to the software (OS) number that the firmware deployed with is the best we can do. So again, its confusing.
The OS number is bootloader just tells you what software number the current ROM is based. Flash a ROM with a different base, and that number will change. But the hboot, radio "firmware" will not change. Therefore you want to have firmware that corresponds to your ROM.
There is in fact no easy way to tell what firmware package you have installed. The best way is to look at the hboot and radio numbers. So tell me what those say on the hboot screen, and I can probably tell what firmware you are on (although I'm not that familiar with the T-Mob radio numbers).
If you read the thread I linked, it explains it a little further under the big red letters.
redpoint73 said:
That isn't the firmware number.
The term "firmware" is a little confusing. On this device, when most folks say "firmware" (including the link I sent you) it refers to a package of modules including hboot, radio, WiFi, Bluetooth, and others, that DO NOT get flashed with the ROM (but are critical in the correct operation of the ROM).
Firmware does not in fact really have a "number", so referring to the software (OS) number that the firmware deployed with is the best we can do. So again, its confusing.
The OS number is bootloader just tells you what software number the current ROM is based. Flash a ROM with a different base, and that number will change. But the hboot, radio "firmware" will not change. Therefore you want to have firmware that corresponds to your ROM.
There is in fact no easy way to tell what firmware package you have installed. The best way is to look at the hboot and radio numbers. So tell me what those say on the hboot screen, and I can probably tell what firmware you are on (although I'm not that familiar with the T-Mob radio numbers).
If you read the thread I linked, it explains it a little further under the big red letters.
Click to expand...
Click to collapse
Oh , I'm sorry. I didn't know that. I'm gonna flash that firmware right now. The sad part is will not know if this worked untill tomorrow , because I don't have 4G in the area where i live.
HBOOT : 3.19.0.0000
Radio: 1.25.214500021.06G
Thank you very much for your help and I'll come back with the result tomorrow
freskeeeh said:
Oh , I'm sorry. I didn't know that. I'm gonna flash that firmware right now. The sad part is will not know if this worked untill tomorrow , because I don't have 4G in the area where i live.
HBOOT : 3.19.0.0000
Radio: 1.25.214500021.06G
Thank you very much for your help and I'll come back with the result tomorrow
Click to expand...
Click to collapse
So after flashing that firmware my radio is still : 1.25.214500021.06G. So I guess that didn't change anything ?
freskeeeh said:
HBOOT : 3.19.0.0000
Radio: 1.25.214500021.06G
Click to expand...
Click to collapse
Interesting, you already seem to be on the Lollipop WWE Euro radio, based on this: http://forum.xda-developers.com/showpost.php?p=58306004&postcount=734
And the T-Mobile radio number is 1.23.213311491.05G, based on this: http://forum.xda-developers.com/showpost.php?p=59275459&postcount=712
Did you flash any firmware packages previously (by the method that I linked). Or was the phone modified by a previous owner?
Now why the WWE Euro radio doesn't give you LTE, is the real mystery. You've used this SIM on another phone before, and had LTE?
redpoint73 said:
Interesting, you already seem to be on the Lollipop WWE Euro radio, based on this: http://forum.xda-developers.com/showpost.php?p=58306004&postcount=734
And the T-Mobile radio number is 1.23.213311491.05G, based on this: http://forum.xda-developers.com/showpost.php?p=59275459&postcount=712
Did you flash any firmware packages previously (by the method that I linked). Or was the phone modified by a previous owner?
Now why the WWE Euro radio doesn't give you LTE, is the real mystery. You've used this SIM on another phone before, and had LTE?
Click to expand...
Click to collapse
Umm , yes. I flashed a firmware when i updated viper rom from 44.2 to 4.4.4 i think. I don't know if the phone was modified by a previous owner.
I used the SIM in another phone and it had LTE.
freskeeeh said:
Umm , yes. I flashed a firmware when i updated viper rom from 44.2 to 4.4.4 i think.
I used the SIM in another phone and it had LTE.
Click to expand...
Click to collapse
The radio number would suggest you flashed the Android 5.0 firmware, not 4.4.4.
Check the APN again. Does it match the APN on the "other" phone?
If the 4.16.401 firmware, and running current Viper, and right APN, I don't see a reason why LTE won't work. You might check the Viper thread to see if there are any other reports of a similar bug.
redpoint73 said:
The radio number would suggest you flashed the Android 5.0 firmware, not 4.4.4.
Check the APN again. Does it match the APN on the "other" phone?
If the 4.16.401 firmware, and running current Viper, and right APN, I don't see a reason why LTE won't work. You might check the Viper thread to see if there are any other reports of a similar bug.
Click to expand...
Click to collapse
The APN is good. I'm gonna check Viper thread but probably I'm just gonna leave it like this. I'm gonna buy the M9 anyway when it's available here. Just wanted to make 4G work untill I buy it but yeah. Thanks anyway for your big help Have a good day/night.
What country are you in, specifically?
I think there were a couple countries (mostly Eastern Europe, I think) that had some data issues on KitKat, but I think they had some minor radio updates. And I would think those issues would have been cleared up by now (for Lollipop).
Hello. A question here. i have VERIZON sim-unlocked phone. I live in ukraine. So can i get s-off and install on it WWE firmware (or get a WWE x.xx.401.xx RUU) - thus convert it to WWE version to use all available roms and get OTA updates for xx.xx.401.xx version? And still catch the signal/3G and so on? Or it will cause problems and i need to stick to Verizon firmware and roms?
No.
Like I told you in another thread, you can't do it. But I didn't explain why.
Verizon and Sprint are CDMA models, WWE firmware is for GSM models. They are different devices.
It won't work.
As xunholys explained, the hardware is different (Verizon vs. WWE) and therefore the firmware is different. If you try to fully convert, it either won't work, or it will brick the phone.
Your best bet is probably to use a WWE based custom ROM, and change the kernel to make it work on Verizon. At least that is what a Verizon owner (using his phone on a non-VZN network) stated. You might check the Verizon specific forum section for more detail.
But you will not be able to add full "WWE" band compatibility. The band support is built into firmware; and the firmware is not cross-compatible.
Hello everyone,
I hope someone can help me.
I have an asian unlocked M8 and I live in Mexico so I cant use LTE. To solve this I got S-off, supercid, wwe mid and wwe firmware with Android Revolution Rom and still cant use LTE (Europe LTE bands do not include band 4 aws, so its the same crap). I tried to flash att and t-moble radio but mi phone did not recognise the radio file (Unknown baseband) so I get no signal. Then I flashed the wwe radio and got the same no recognition problem. The only way to get back signal is to flash again the firmware (it does not work to switch the att radio image in wwe firmware)
I need att or t-mobile bands to use mexican carriers Telcel or Movistar LTE (band 4 aws) and I guess I should use att or t-mobile firmware with the matching based rom.
- Can someone recomend me a rom version and firmware version to download??
- Is the unknown baseband problem because of the wwe mid? Should I also change the wwe to att or t-mobile mid and cid??
Thanks for your time and help!!
chortiman said:
I tried to flash att and t-moble radio but mi phone did not recognise the radio file (Unknown baseband) so I get no signal. Then I flashed the wwe radio and got the same no recognition problem. The only way to get back signal is to flash again the firmware (it does not work to switch the att radio image in wwe firmware)
Click to expand...
Click to collapse
What if you current firmware version, is it Euro 4.16.401?
Where did you get the AT&T radio(s) and what is the file name?
Are you sure you are using the baseband for the right Android version (4.4.4 or 5.0, etc.)? If you are using the wrong radio for the Android version, that is the only reason I can see for any problems. As long as you are using the right version (Lollipop radio with a Lollipop ROM, etc), the radios should be interchangeable (with exception of Verizon, Sprint, M8x, dual SIM - don't mess with those).
But I would still advise to flash the whole firmware (not just the radio) to assure that everything plays well together.
chortiman said:
- Can someone recomend me a rom version and firmware version to download??
Click to expand...
Click to collapse
I would suggest the Lollipop AT&T firmware (4.28.502) or Dev Edition (4.16.1540 - same band support as AT&T version) which you can get here (attached with the full ROM, unfortunately): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
After that, you should be able to use just about any Lollipop ROM for the M8.
redpoint73 said:
What if you current firmware version, is it Euro 4.16.401?
Where did you get the AT&T radio(s) and what is the file name?
Are you sure you are using the baseband for the right Android version (4.4.4 or 5.0, etc.)? If you are using the wrong radio for the Android version, that is the only reason I can see for any problems. As long as you are using the right version (Lollipop radio with a Lollipop ROM, etc), the radios should be interchangeable (with exception of Verizon, Sprint, M8x, dual SIM - don't mess with those).
But I would still advise to flash the whole firmware (not just the radio) to assure that everything plays well together.
Click to expand...
Click to collapse
Yes, my current firmware is 4.16.401.10
I got the radio images from here, but I certanly mixed basebands with android versions.
I will go with your suggestion of flash a whole firmware.
redpoint73 said:
I would suggest the Lollipop AT&T firmware (4.28.502) or Dev Edition (4.16.1540 - same band support as AT&T version) which you can get here (attached with the full ROM, unfortunately): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
After that, you should be able to use just about any Lollipop ROM for the M8.
Click to expand...
Click to collapse
Can I flash this firmware with another rom, say INSERT COIN? I read in the ROM instructions to use 4.16.401.10
Can I use the ROM attached to the firmware you suggested with my local carrier?
Thank you again for your help.
chortiman said:
Can I flash this firmware with another rom, say INSERT COIN? I read in the ROM instructions to use 4.16.401.10
Click to expand...
Click to collapse
As I said, the firmware can be used with most any Lollipop M8 custom ROM.
The instructions say you need 4.16.401 firmware, but that's just a "lazy" requirement. Any Sense LP firmware should work with the current InsertCoin. To be fair, many of the "international" devs are Euro based, so they have little or no experience with other region's firmwares; and don't want to be held responsible for issues that arise for using them.
You should use or select the firmware based on region and carrier band support (in addition to Android version); not by ROM.
chortiman said:
Can I use the ROM attached to the firmware you suggested with my local carrier?
Click to expand...
Click to collapse
You can. I'm personally not crazy about AT&T specific "features" (as the ROM is meant to include). Even having AT&T as a carrier, I tend toward the non-ATT based ROMs.
You may need to manually enter your carrier's APN info to get data connection.
Perfect.
I am currently in my work but at night I will follow your suggestions and come back tomorrow -or as soon as posible- to inform if this worked and may be useful to someone else.
Best regards!!
chortiman said:
Perfect.
I am currently in my work but at night I will follow your suggestions and come back tomorrow -or as soon as posible- to inform if this worked and may be useful to someone else.
Best regards!!
Click to expand...
Click to collapse
Hi, did you solve it? no luck here.
elpicard said:
Hi, did you solve it? no luck here.
Click to expand...
Click to collapse
Hi,
I flashed succesfully the att latest firmware, but it is the same, no LTE signal.
I recently found this posts to UNLOCK QUALCOMM BANDS and I tried to follow the steps to do so, but they are very unclear and I got stuck in step 3.
I wanted to come back to this post to share a solution, but i cant find it. If you can complete the guide, please share your results.
Best regards.
chortiman said:
I flashed succesfully the att latest firmware, but it is the same, no LTE signal.
Click to expand...
Click to collapse
Check your APN, sometimes carriers use a different one to support LTE.
Otherwise, if you tried only one firmware (such as AT&T) then try another: T-Mob or Dev Ed all supposedly support AWS.
Hello there guys, im wondering if it is possible to unlock a band from my htc one m8 from at&t, i live in venezuela and my current company (Digitel) the 3g band is 900, but this phone only have the 3g band on 850, my question is can i unlock this by any chances because is annoying that my phone is from E to 4G and manually i can even recive calls when its 4G and it wont change to 3g
(sorry about my english)
You need s-off by sunshine (if not s-off already). Then you can flash another version's radio/firmware to enable the desired band(s).
May also need to change CID and MID (after s-off) if the firmware is signed.
redpoint73 said:
You need s-off by sunshine (if not s-off already). Then you can flash another version's radio/firmware to enable the desired band(s).
May also need to change CID and MID (after s-off) if the firmware is signed.
Click to expand...
Click to collapse
thanks for the reply
i have already s-off my device but im kinda noob in this what firmware do u recommend to actually have this thing working
mabf000 said:
i have already s-off my device but im kinda noob in this what firmware do u recommend to actually have this thing working
Click to expand...
Click to collapse
According to the following specs, Euro or Asia firmware should support 3G 900 MHz: http://www.gsmarena.com/htc_one_(m8)-6074.php
Although, keep in mind you should also verify the LTE (4G) band used by the carrier is also supported by the version's firmware you pick. You didn't state what band your carrier uses for LTE.
Also, it should be kept in mind, anytime you purchase a phone from a 3rd party source (other than your carrier) you need to do the proper research to verify the device actually supports your carrier's network. You're lucky this time (if you get the proper bands working). This is the first smartphone chipset that allows band support to be changed in software. On previous smartphones (and may also be true on other current smartphones using other chipsets), band support was set in hardware, meaning there is no way to change it.
redpoint73 said:
According to the following specs, Euro or Asia firmware should support 3G 900 MHz: http://www.gsmarena.com/htc_one_(m8)-6074.php
Although, keep in mind you should also verify the LTE (4G) band used by the carrier is also supported by the version's firmware you pick. You didn't state what band your carrier uses for LTE.
Also, it should be kept in mind, anytime you purchase a phone from a 3rd party source (other than your carrier) you need to do the proper research to verify the device actually supports your carrier's network. You're lucky this time (if you get the proper bands working). This is the first smartphone chipset that allows band support to be changed in software. On previous smartphones (and may also be true on other current smartphones using other chipsets), band support was set in hardware, meaning there is no way to change it.
Click to expand...
Click to collapse
thanks, my carrier uses band 3 (1800MHz) for LTE and for 3g uses band 8 (900MHz) so what firmware do you recommend?
mabf000 said:
thanks, my carrier uses band 3 (1800MHz) for LTE and for 3g uses band 8 (900MHz) so what firmware do you recommend?
Click to expand...
Click to collapse
Same as I've already stated, EMEA (Euro) or Asia supports both those bands.
EMEA is a very common (probably most common) version on this forum, so that may be your best bet as far as ease of getting the files, fellow user support, etc.
redpoint73 said:
Same as I've already stated, EMEA (Euro) or Asia supports both those bands.
EMEA is a very common (probably most common) version on this forum, so that may be your best bet as far as ease of getting the files, fellow user support, etc.
Click to expand...
Click to collapse
OK i have the AT&T htc one m8 with this stock firmware (3.42.502.1)
so if i get the s-off thing, can i install the Unlocked/Developer ROM that is (6.12.1540.4) and get the bands i want?
im looking the roms in this web (http://www.htc.com/us/support/rom-downloads.html)
mabf000 said:
OK i have the AT&T htc one m8 with this stock firmware (3.42.502.1)
so if i get the s-off thing, can i install the Unlocked/Developer ROM that is (6.12.1540.4) and get the bands i want?
Click to expand...
Click to collapse
NO. The Developer version is US, not Euro or Asia. Why do you think the Dev Edition has the bands you want, or corresponds to the Euro or Asia versions?
The Dev Edition has the exact same band support as the AT&T version, so this is the exact opposite of what you want (doesn't have the bands you want).
Euro firmware is probably what I would recommend (as previously stated), and can be found on the following threads (as well as other places):
http://forum.xda-developers.com/showthread.php?t=2696282
http://forum.xda-developers.com/htc-one-m8/development/one-firmware-4-16-401-13-noredtext-t3233629
Follow the instructions as applicable, for changing CID and MID (after s-off).
redpoint73 said:
NO. The Developer version is US, not Euro or Asia. Why do you think the Dev Edition has the bands you want, or corresponds to the Euro or Asia versions?
The Dev Edition has the exact same band support as the AT&T version, so this is the exact opposite of what you want (doesn't have the bands you want).
Euro firmware is probably what I would recommend (as previously stated), and can be found on the following threads (as well as other places):
http://forum.xda-developers.com/showthread.php?t=2696282
http://forum.xda-developers.com/htc-one-m8/development/one-firmware-4-16-401-13-noredtext-t3233629
Follow the instructions as applicable, for changing CID and MID (after s-off).
Click to expand...
Click to collapse
I did all the things you say and i installed this RUU_M8_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.19.707.2_Radio_1.25.21331147A1.06G_20.69.4196.01_F_release_414204_signed
im going to test now to see if my phone gets 3g
redpoint73 said:
NO. The Developer version is US, not Euro or Asia. Why do you think the Dev Edition has the bands you want, or corresponds to the Euro or Asia versions?
The Dev Edition has the exact same band support as the AT&T version, so this is the exact opposite of what you want (doesn't have the bands you want).
Euro firmware is probably what I would recommend (as previously stated), and can be found on the following threads (as well as other places):
http://forum.xda-developers.com/showthread.php?t=2696282
http://forum.xda-developers.com/htc-one-m8/development/one-firmware-4-16-401-13-noredtext-t3233629
Follow the instructions as applicable, for changing CID and MID (after s-off).
Click to expand...
Click to collapse
hi how are you? well finally i got to update the firmware and everything but i cant get my phone on 3g, I dont know what when wrong or i dont know if i did something wrong.
What should i do know to test the bands
this is the info on the bootloader
*** Software status: Official ***
*** UNLOCKED ***
M8_UL_CA PVT S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.29.214500021.12G
OpenDSP-v51.2.2-00593-M8974_FO.1015
OS-6.12.401.4
eMMC-boot 2048MB
mabf000 said:
well finally i got to update the firmware and everything but i cant get my phone on 3g, I dont know what when wrong or i dont know if i did something wrong.
What should i do know to test the bands
Click to expand...
Click to collapse
Try the SIM in another phone, if possible, to see if it works on 3G on another device.
Also, be sure the APN info for your carrier is properly entered. Double check and triple check every input to make sure every single character is correct. Even a single added space or missing character can prevent you from getting data properly.
redpoint73 said:
Try the SIM in another phone, if possible, to see if it works on 3G on another device.
Also, be sure the APN info for your carrier is properly entered. Double check and triple check every input to make sure every single character is correct. Even a single added space or missing character can prevent you from getting data properly.
Click to expand...
Click to collapse
ok i did what you told me and it works, it gets 3g on a google nexus and the apns is good but my htc still doesnt get 3g
mabf000 said:
ok i did what you told me and it works, it gets 3g on a google nexus and the apns is good but my htc still doesnt get 3g
Click to expand...
Click to collapse
How does the APN on the HTC compare to that on the Nexus? Are they identical?
redpoint73 said:
How does the APN on the HTC compare to that on the Nexus? Are they identical?
Click to expand...
Click to collapse
hi well yeah they have the same APN