Anyone ever been trying to flash the stock OG5.TAR through ODIN and had it fail, then sayd Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I can not get a rom or stock tar to flash and work after having other issues.
Also tried flashing twrp again, then going into recovery and flashing Sac23's Rom, and get this error:
symlink: some symlinks failed
E: Error executing updater binary in zip '/external_sd/Note_5_Sac23_Port_V2.1.zip'
Error flashing zip '/external_sd/Note_5_Sac23_Port_V2.1.zip'
and says Failed.
Dedline said:
Anyone ever been trying to flash the stock OG5.TAR through ODIN and had it fail, then sayd Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I can not get a rom or stock tar to flash and work after having other issues.
Also tried flashing twrp again, then going into recovery and flashing Sac23's Rom, and get this error:
symlink: some symlinks failed
E: Error executing updater binary in zip '/external_sd/Note_5_Sac23_Port_V2.1.zip'
Error flashing zip '/external_sd/Note_5_Sac23_Port_V2.1.zip'
and says Failed.
Click to expand...
Click to collapse
A little more info such as did you check md5 after downloading the stock tar?
Whats your current version of Android?
What other if any mods have you done?
You can try the stock rom by tx_dbs_tx here:
http://forum.xda-developers.com/showthread.php?t=3176288
Read the OP carefully.
If that works then go here:
http://forum.xda-developers.com/showthread.php?t=2956667
and flash one of the three awsome bug free roms.
Related
I can install ANY rom (cm10.1, Omega 9.1, Revolution 6.0, etc) except for Stock. I tried via CWM, TWRP, adb sideload and Odin. I also tried 3 different .zips (Greek, French DLL4 and DLL7).
I always get the same error:
E: Can't open rom.zip (bad) Installation aborted
Very frustrating.. help?
Have you made sure the rom files are complete? Check the MD5 for each rom u downloaded
Indeed.looks like a bad download.
BullHorn7 said:
I can install ANY rom (cm10.1, Omega 9.1, Revolution 6.0, etc) except for Stock. I tried via CWM, TWRP, adb sideload and Odin. I also tried 3 different .zips (Greek, French DLL4 and DLL7).
I always get the same error:
E: Can't open rom.zip (bad) Installation aborted
Very frustrating.. help?
Click to expand...
Click to collapse
Hi,
difficult to believe 3 zips are corrupted. As far as remember (but not sure as I didn't flash for a long time), if you downloaded them from samfirmware, you can't flash them through recovery: you need to unzip them first before flashing xxx.tar.md5 as PDA with odin.
Pierre.
ohtoulouz said:
Hi,
difficult to believe 3 zips are corrupted. As far as remember (but not sure as I didn't flash for a long time), if you downloaded them from samfirmware, you can't flash them through recovery: you need to unzip them first before flashing xxx.tar.md5 as PDA with odin.
Pierre.
Click to expand...
Click to collapse
hi what stock file are you trying to flash ?
and are you using oding to flash the file ?
I downloaded Freeza's spr MD4 full Odex ROM, flashed stock recovery, and tried to flash the ROM from recovery, but I get this error: E:signature verification failed - Installation aborted. Am I missing a step or something?
What's the link you downloaded from? You have to flash through from custom recovery unless its one of.the "update_MB1_to_MD4" files.
Fixed...my bad
This is the thread: http://forum.xda-developers.com/showthread.php?t=1910947
I figured out what I did, which was to mis-read freeza's OP. The reference to using stock recovery only applies to the stock images, which makes sense now that I think about it. I went back to TWRP and had no issue flashing the ROM. Mea culpa.
Im on the Sprint gs3 and after coming from odin and trying to flash MIUI v3.6.28 I get a "failed" "error executing binary script" and a "error flashing zip". Even downloaded the rom twice and got the same thing. Need help.
I installed probam(4.4.2) rom on my phone about a week ago, was having trouble with it so i tryed to wipe everything and install Skynote Air Rom (4.3). but everytime i go to install i get
"installing update..."
"format() expects 5 args got 3"
"E: error in /storage/sdcard1/Roms/Sky_Note_Air.zip"
"(status 7)"
"installation Aborted"
so after that failed i tried odin to go to complete stock firmware and re-root and get CWM recovery and now its just running stock
Now i have done a little Research but im getting mixed answers, some say its the recovery, but others say its because i need to re-partion my phone.
tried philz recovery, and TWRP but both with same error
If it needs re-partioning how would i go about doing it without bricking my phone
any help would be very appreciated
Thanks
...hello there...I suggest this steps...
1) check if your phone is rooted correctly (use GalaxyNote2Root)
2) flash Philz recovery over Odin (use philz_touch_6.02.1-n7100)
3) Try with some custom ROM that have Aroma instalation like (use Sotmax_Ultimate_Stock_V14_XXUEMK4_HD_AR)
Regards...
bradley443 said:
I installed probam(4.4.2) rom on my phone about a week ago, was having trouble with it so i tryed to wipe everything and install Skynote Air Rom (4.3). but everytime i go to install i get
"installing update..."
"format() expects 5 args got 3"
"E: error in /storage/sdcard1/Roms/Sky_Note_Air.zip"
"(status 7)"
"installation Aborted"
so after that failed i tried odin to go to complete stock firmware and re-root and get CWM recovery and now its just running stock
Now i have done a little Research but im getting mixed answers, some say its the recovery, but others say its because i need to re-partion my phone.
tried philz recovery, and TWRP but both with same error
If it needs re-partioning how would i go about doing it without bricking my phone
any help would be very appreciated
Thanks
Click to expand...
Click to collapse
I tried flashing the latest snapshot, nightly and stable build of CM.11 using TWRP. I did a factory reset first then tried flashing CM.11 followed by GApps, but all I get is "Failed" in red when I try flashing the rom.
Any Ideas?
Flash Philz Touch recovery and then flash cm11.
audit13 said:
Flash Philz Touch recovery and then flash cm11.
Click to expand...
Click to collapse
Thx. I'll give it a go and let you know! Hope this works
Update: Sadly that too failed. The last thing it tries to do before receiving the red "failed" error is this: Updating partition details...
The error is this:
E: Error executing updater binary in zip '.sdcard/Android Roms/philz_touch_6.15.4-d2att.zip
Im going to try and put these flashable files in the root of my SD card and see if that helps.
If it fails again, find and select Copy Log to SD. Often this will give more insight into the cause.
Try flashing via Odin.