Related
having problem syncing the new watch faces on the watch?
furiousgtz said:
having problem syncing the new watch faces on the watch?
Click to expand...
Click to collapse
Same problem here, tried resetting watch, phone etc. Also uninstalled and re installed still not showing up.
2crazeybolt said:
Same problem here, tried resetting watch, phone etc. Also uninstalled and re installed still not showing up.
Click to expand...
Click to collapse
Me too! I did all of that. I just got new a new replacement note 4 and it was working fine on my previous note 4 but this will not sync any faces or no moto app.
ok I was able to get it working. I factory reset the watch and via android wear I added new wearable device and clicked on sync all app.
furiousgtz said:
ok I was able to get it working. I factory reset the watch and via android wear I added new wearable device and clicked on sync all app.
Click to expand...
Click to collapse
That did the trick, thanks i'm working good now.
Reset my phone three times and no love. I can update the original stock faces but thennew faces never show up
Same thing happened to me today. I've reset my phone 3 times and resync'd many times without any luck. Any suggestions?
Edit:
Finally, I was able to fix it. My case was as follows:
I had paranoid android installed (new faces were fine). Had to restore factory settings on my phone, phone didn't want to sync after I reset my phone so I restored factory settings on my phone. I lost the new faces. Tried resetting the phone and watch multiple times and it didn't work. I went back to stock 5.0 (LRX21O) by following this guide . After restoring my phone to stock, I reset the watch one last time. Paired the phone and watch, customized one of the new faces chose minimal face on watch (still no new faces on my phone), then customized the same new face again, when trying to select another face it only showed one (simple). I chose that one, then tried to change to a new face and viola! new faces appeared.
Not sure what of everything I did was the fixing factor but wanted to share. Hope this helps.
Faced same problem. But i managed to update my 360. Try to uninstall all 3rd party app on ur phone, uninstall motoconnect and android wear. Last step is factory reset ur moto360
Then install motoconnect, install android wear ( do not install any 3rd party app at this stage), go to android wear setting and resync available app. Just make sure your phone screen is on about 10 minutes or so, moto360 will reboot after that.
All new faces and moto body apps will show up eventually - i tried this 3 times.
Hope this may help
Motorola 360 new watch faces not showing up on watch
I had the same problem, new watch faces would show in connect app (particularly the My Design one) and I could customize them but the new ones would never show up as an available watch face option on the 360. It may be related to replacing your phone as the new watch faces worked fine with my Old Note 4 then I had to replace it (because it had a problem) so when I got my replacement Note 4 and reconnected my watch it would never give me the option for the new watch faces even after I "reset" the Moto 360 numerous times. Interestingly for some people the new watch face options don't even show up in their Motorola Connect App on their phone, I think it may be related to their phone OS version. I have a coworker with a Note 3 and the new watch faces are not a option even though his motorola connect app is up to date.
Here is what I did to fix my 360:
- uninstall all apps on your phone related to your watch (Motorola Connect, Android Wear, 3rd party, etc.)
- Reset your 360 back to factory. (not just a restart)
- Wait for watch to prompt to install Wear on phone.
- install wear on phone, it will remember your old watch, pick the menu option to forget that watch though so it acts like this is the first time you are setting up a watch.
- Go through the watch pair and setup routine with the wear app till you get to the main wear screen that shows the watch connected and what your voice actions are.
- Go through the training setup on your watch (swipe, swipe....) till it's to it's Normal screen with your notifications.
- Install Motorola Connect app on your phone, go through the setup and wait till it says "connected" to your watch
- Set your phone and your 360 down and don't touch either for 15 minutes (no new apps, settings, etc)
- Your new watch faces should now be on your 360.
- re install the rest of your wear junk.
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
[email protected] said:
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
Click to expand...
Click to collapse
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
supercluver said:
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
Click to expand...
Click to collapse
Have you tried clearing app data for the connect app on the phone, then uninstall it. Reboot both the phone and watch. Then once the phone and watch are connected again, download the connect app.
DQEight said:
Have you tried clearing app data for the connect app on the phone, then uninstall it. Reboot both the phone and watch. Then once the phone and watch are connected again, download the connect app.
Click to expand...
Click to collapse
Yeah. Apparently, and I should have guessed this, it is an issue with my running the 6.0 preview 3 on my nexus 6. So yeah, sucks but M is worth not having a couple new watch faces and a different color charging face.
supercluver said:
Yeah. Apparently, and I should have guessed this, it is an issue with my running the 6.0 preview 3 on my nexus 6. So yeah, sucks but M is worth not having a couple new watch faces and a different color charging face.
Click to expand...
Click to collapse
I thought it was M p3 too, i even removed all my wear apps and reseted the watch XD
Motorola told me to "unoptimize" the wear abb (from the battery options).
I asked if it could not be an incompatibility with M, but they did no know.
EDIT: motorla lvl2 suppoty called, they say that the newer API level in android 6.0 makes it incompatible with moto connect update
[email protected] said:
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
Click to expand...
Click to collapse
Thanks, worked PERFECTLY!
Sent from my Nexus 6 using Tapatalk
cocchiararo said:
I thought it was M p3 too, i even removed all my wear apps and reseted the watch XD
Motorola told me to "unoptimize" the wear abb (from the battery options).
I asked if it could not be an incompatibility with M, but they did no know.
EDIT: motorla lvl2 suppoty called, they say that the newer API level in android 6.0 makes it incompatible with moto connect update
Click to expand...
Click to collapse
They DO know that 6.0 is about to be released right? Ugh. Guess I'll stop trying to get this to work on my Nexus 6.
supercluver said:
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
Click to expand...
Click to collapse
i have the same problem, factory reset watch and nothing happend, if anybody have a solution please...
santiagodm said:
i have the same problem, factory reset watch and nothing happend, if anybody have a solution please...
Click to expand...
Click to collapse
if you are on 6.0, then you have to wait for an update from motorola.
cocchiararo said:
if you are on 6.0, then you have to wait for an update from motorola.
Click to expand...
Click to collapse
ok, Thanks cocchiararo, just have to wait
I don't have the option to change the charging colors. Swiping down on the watch face does nothing, and there isn't an option for it in Motorola Connect. I'm running the latest Moto 360 software on the watch, and my phone is running OS 5.1.
Has anyone had an issue where you can't get watch faces to display the date? I mark "show date" in the moto connect app and it shows where it should be but nothing on the watch itself.
Also my watch doesn't load certain watch faces... Again they show up in the moto connect app but I cant find them on the watch itself. Example, I make adjustments to the "Dials II" watch face and save it. On the watch it says I update the "minimal watch face" and dials II is not an option.
Are any of these known problems and/or does anyone know a fix for them? I could use some help here. Let me know if you need additional info....
And I need a bump for some help.
Yep. I'm having the same issue after the update. No solution as of yet.
Kraizk said:
Has anyone had an issue where you can't get watch faces to display the date? I mark "show date" in the moto connect app and it shows where it should be but nothing on the watch itself.
Also my watch doesn't load certain watch faces... Again they show up in the moto connect app but I cant find them on the watch itself. Example, I make adjustments to the "Dials II" watch face and save it. On the watch it says I update the "minimal watch face" and dials II is not an option.
Are any of these known problems and/or does anyone know a fix for them? I could use some help here. Let me know if you need additional info....
Click to expand...
Click to collapse
1. Unpair and RESET Moto 360 (do not turn back on until step 4).
2. Remove Moto360 pairing from phone.
3. Uninstall Android Wear and Motorola Connect, reboot device.
4. Reinstall Android Wear and setup Moto360.
5. Reinstall Motorola connect.
5a. Curse under your breath that you had to do this AGAIN.
Done.
Dusty Rhodes said:
1. Unpair and RESET Moto 360 (do not turn back on until step 4).
2. Remove Moto360 pairing from phone.
3. Uninstall Android Wear and Motorola Connect, reboot device.
4. Reinstall Android Wear and setup Moto360.
5. Reinstall Motorola connect.
5a. Curse under your breath that you had to do this AGAIN.
Done.
Click to expand...
Click to collapse
Thanks for the help. I swear I did this like 8 or 9 times... Finally got it though.
didn't work for me... Software update did
Just got brand new moto360 from Costco. I'm on a nexus 6 stock. Watch wouldn't show date even though I customized it on moto connect and it showed a date in there. Tried the above steps and didn't work for me...
I had checked for a system update on the watch right after I set it up, and it said it was up to date. After following the instructions above with no success, out of options, I checked for updates on the watch again. Lo and behold it started downloading an update. It took about 5-10 minutes and I got a card saying it was ready to update. Of course now the battery's already down to 63% and update requires 80%+... Another 20 minutes on the charger before I could update. Update took about 15 minutes. Now everything is magically working...
Have to say, not the greatest experience so far...
Ever since updating this evening, I'm getting unfortunately the process com.google.process.gapps has stopped over and over. I hit ok, it comes back.
No clue what's causing it. The only thing that changed was I updated Android Wear app.
USA Prime Credit Peggy said:
Ever since updating this evening, I'm getting unfortunately the process com.google.process.gapps has stopped over and over. I hit ok, it comes back.
No clue what's causing it. The only thing that changed was I updated Android Wear app.
Click to expand...
Click to collapse
Make sure your phone is running latest Google Play Services (7.0.97)
https://play.google.com/store/apps/details?id=com.google.android.gms
What Play Services version is running on your 360? Settings > About > tap Software Version. Should be 7.0.95
xdatastic said:
Make sure your phone is running latest Google Play Services (7.0.97)
https://play.google.com/store/apps/details?id=com.google.android.gms
What Play Services version is running on your 360? Settings > About > tap Software Version. Should be 7.0.95
Click to expand...
Click to collapse
mine on my moto is 6.7.74. how would I upgrade this manually?
---------- Post added at 09:27 AM ---------- Previous post was at 09:21 AM ----------
anubis1980 said:
mine on my moto is 6.7.74. how would I upgrade this manually?
Click to expand...
Click to collapse
figured it out, just sync the apps from android wear app, thanks anyway
Solution to update until they fix the issue!
Hi guys,
well this is what I did!
You have to delete Android Wear from your phone and then download the last update APK and install this on your phone, so in a sense you are taking the Android Wear back to the last update:
so firstly delete android wear app on phone
On your phone:
Google Android Wear 1.0.5.1724356 and select first entry apkmirror
scroll down to All Versions and choose whether you want the last one Mar 12th or Feb 25th, incidently I chose Feb 25th
Click on download arrow and then click to install on phone, you may need to tick allow download from outside sources, this site is google approved so is ok.
and thats it, you now have the previous version, I would advise installing My Backup pro as this will allow you to save your APKs if you accidentally update one again in the future. You could also deselect the auto update on the Android Wear app.
Best
J
Doesn't work..
Nothing of this works for me..it's so annoying.. ;(
Reset
Xelfmade said:
Nothing of this works for me..it's so annoying.. ;(
Click to expand...
Click to collapse
I had to go into my watch settings and do a factory reset and re-install android wear app (not sure if re-installing the app really did anything, but didn't hurt)...It was annoying having to set it up all over again and blocking cards I do not want to show up, but its better then this constant notification killing my battery.
Xelfmade said:
Nothing of this works for me..it's so annoying.. ;(
Click to expand...
Click to collapse
Me too. Tried once to factory reset the watch, reinstall the latest Android Wear to my phone and resync the apps. However, the result isn't encouraging at all. The watch was quite hot.
I switched off the bluetooth and let the watch to cool down. Then, I will do another trial. Wish me luck. Thanks!
Thank you sir, that did the trick in my case!
JustinConnor said:
Hi guys,
well this is what I did!
You have to delete Android Wear from your phone and then download the last update APK and install this on your phone, so in a sense you are taking the Android Wear back to the last update:
so firstly delete android wear app on phone
On your phone:
Google Android Wear 1.0.5.1724356 and select first entry apkmirror
scroll down to All Versions and choose whether you want the last one Mar 12th or Feb 25th, incidently I chose Feb 25th
Click on download arrow and then click to install on phone, you may need to tick allow download from outside sources, this site is google approved so is ok.
and thats it, you now have the previous version, I would advise installing My Backup pro as this will allow you to save your APKs if you accidentally update one again in the future. You could also deselect the auto update on the Android Wear app.
Best
J
Click to expand...
Click to collapse
Put me into the boat of this error, it's not all the time, but goes in cycles. I'll get it for an 8 hr stretch, then nothing. I've tried everything except hard resetting my watch. I'm hoping for an update on either play services for the phone or watch to get rid of it. Might be that my Corp email is my most frequent notification, but that is where i see it most.
Phone is 4.4.2 Sprint Galaxy S4T stock build with custom recovery and rooted. No system modifications other than root
reset the device
Fixed!
I did a factory reset. Didn't work the first time, I kept clicking away those pop-ups... I tried again without touching the watch and about 20 minutes later I was good to go, without the process error.
Guys it's way more easier than this , just go too apss and find google play services the touch it, click on uninstall updates then ok and just let it u installed, then go to play storeor wait till notification pup-up about play music or hangout or android wear need app requered and click. On it or in play store search for google play services , both will end at same page , then click update and let it install the latest version and finished , all errors will be vanished, enjoy it.
scorpion_s66 said:
Guys it's way more easier than this , just go to apps and find google play services the touch it, click on uninstall updates then ok and just let it u installed, then go to play store or wait till notification pup-up about play music or hangout or android wear need app required and click. On it or in play store search for google play services , both will end at same page , then click update and let it install the latest version and finished , all errors will be vanished, enjoy it.
Click to expand...
Click to collapse
My Uninstall Updates is grey and not clickable
You need to disable one of your 'Administrators.' Basically, hit the 'disable' button and it will ask you if you want to, hit yes. Then it will ask if you want to install the factory version, hit yes. Next it will take you to the 'Device Admin' in settings and you you will need to disable those, unless you only have one, in order to uninstall the previous update.
Update: The 'fix' given by scorpion_s66 did not work for me. I am now trying to reset my moto 360 but I cannot seem to do that either. All I can say is... Thanks Google! After I updated to the new Android Wear all these issues started. I reverted back to the older version but nothing changed. woooooooooooooooosssaaa wooossaaa woosa - Now I feel better (Bad Boys 2 just in case anyone doesn't get woosa).
I was impacted by this as well. After finding my watch on the charger yesterday morning red-hot and unusable (the same repeating error message mentioned earlier) I finally got it working by attempting a factory reset about 5+ times over the course of over an hour. It finally seemed to "take".
I've had this watch for about a week and while I like it and I'll keep it, I'm also coming to the conclusion that Google does not have it's A-team working on Android Wear. There are some really hacky implementations in here. I mean, why do my offline music transfers (phone to watch) automatically stop with no warning when the phone drops to 50% battery (which happens about about 50 songs). Why do I have to go through this ridiculous 5-times "ok google" to get rid of that message on the watch face? Seriously, who thought this was a good design? Why did many of our watches get nearly bricked after a Android Wear update on the phone? Why can't I use my watch or transfer music while it's charging? Why do I have to go through this elaborate process to view/access my list of apps?
Sorry for the rant. Last year I read a book titled "How Google Tests Software", which I found quite interesting at the time. This crap certainly gives me a different perspective..
aperry said:
I was impacted by this as well. After finding my watch on the charger yesterday morning red-hot and unusable (the same repeating error message mentioned earlier) I finally got it working by attempting a factory reset about 5+ times over the course of over an hour. It finally seemed to "take".
I've had this watch for about a week and while I like it and I'll keep it, I'm also coming to the conclusion that Google does not have it's A-team working on Android Wear. There are some really hacky implementations in here. I mean, why do my offline music transfers (phone to watch) automatically stop with no warning when the phone drops to 50% battery (which happens about about 50 songs). Why do I have to go through this ridiculous 5-times "ok google" to get rid of that message on the watch face? Seriously, who thought this was a good design? Why did many of our watches get nearly bricked after a Android Wear update on the phone? Why can't I use my watch or transfer music while it's charging? Why do I have to go through this elaborate process to view/access my list of apps?
Sorry for the rant. Last year I read a book titled "How Google Tests Software", which I found quite interesting at the time. This crap certainly gives me a different perspective..
Click to expand...
Click to collapse
I tend to disagree. I was having the same problem and I wasn't even able to set my moto 360 as those messages were constantly popping up. However, I came across the contacting google option, and within a minute after I made the request, they have actually got someone from the android wear team to call me... all the way to Australia and resolve my problem over the phone! Just because you read a book bad mouthing Google, doesn't mean it's all that crap!!
I took JustinConnor's reply and edited it a little, becase the original one was just partly helpful for me, so all the steps: (but still: BIG THATNKS, MAN!)
Delete android wear app from your phone
Download the last good version of ANDROID WEAR - for me it was version 1-1-1-1876095.
Make Factory Reset to your watch (not the sowt refactory reset - but REAL refactory reset through recovery mode with black-background (more of this in the end)
connect your watch to your phone via downloaded android wear app
Factory reset menu should look like black background and console-like words in the front (unfortunately I can't post links because I haven't posted 10 times yet - so forum do not allow me to do that).
zacharywater said:
I tend to disagree. I was having the same problem and I wasn't even able to set my moto 360 as those messages were constantly popping up. However, I came across the contacting google option, and within a minute after I made the request, they have actually got someone from the android wear team to call me... all the way to Australia and resolve my problem over the phone! Just because you read a book bad mouthing Google, doesn't mean it's all that crap!!
Click to expand...
Click to collapse
I'll admit that my post was born out of frustration, but I do want to clarify that the "book" I referenced was written *by* Google employees and it doesn't bad-mouth them at all. It describes with a great degree of pride their software testing process, and it's a good read for anyone in the industry.
I do continue to be frustrated by many of the design decisions in Android Wear, and I maintain they must have their B-team working on this, or at least on the design. For some reason the "ok google" message started reappearing all of the sudden the other day (after I had gone through the ridiculous steps to make it go away days before). It's probably because I don't use the feature very much, but why do I need to be reminded of this in a way that completely interferes with my watch face? Then I was out for a run yesterday and my offline music playback just stopped at 15% battery. I guess it's to protect me from myself, kind of like how the music transfer from phone to watch automatically stops at 50% battery and doesn't work at all while the watch is on the charger. Offline playback was one of the important use cases for me (jogging without phone!). It works, but it's a poor user experience. Don't get me wrong, I like the watch and I personally think it's the best looking smartwatch on the market. It has some cool features, and it's good enough to keep using daily. But the software is disappointing and it's hard for me to recommend this to any of my friends. I was lucky enough to get a deal on it for about $100, and I'd probably be much more disappointed had I paid full price.
PS: Count me as one of the people really interested to see how this upcoming wifi functionality will work. I can get about 2 days out of this watch when I'm pretty careful with it. I can deal with 2 days. But any significant active use seems to drain the battery quickly. I'm having trouble understanding how a persistent wifi connection with the cloud will not eat through the battery in a matter of just a few hours, but I'm hoping Google will pull a rabbit out of its hat here. I just hope it's more than a half-baked checkmark on the "iwatch versus android" checklist.
My watch wont charge and i cant fatory reset it either, someone anyone know what to do?
Can you be a little bit more specific?
I had Friday the same issue after updating to Android Wear 1.1.1.1901499 with Google Play Services 7.3.36 .
Charging didn't work, because always the pop-up "Unfortunately,.... bla bla bla" so I turned off the watch.
Put on the charging cradle and let it charge until it turned on by itself.
20% charged, so turned off again and keep charging
At 35% I started the "Reset Watch-Game" interrupted several times by the "Unfortunately,...."
After felt 1 hour tapping the message away, the Moto360 finally made a reset, installed the previous Android Version and since then I am fine.
Today Google updated Android Wear to 1.1.1.1901499 by PlayStore, however my Google Play Service stays on 7.3.34.
I suspect Google Play Services 7.3.36 is only for FW 5.1.1 and won't work well with FW 5.02
Cheers
Tom
tom1807 said:
Can you be a little bit more specific?
I had Friday the same issue after updating to Android Wear 1.1.1.1901499 with Google Play Services 7.3.36 .
Charging didn't work, because always the pop-up "Unfortunately,.... bla bla bla" so I turned off the watch.
Put on the charging cradle and let it charge until it turned on by itself.
20% charged, so turned off again and keep charging
At 35% I started the "Reset Watch-Game" interrupted several times by the "Unfortunately,...."
After felt 1 hour tapping the message away, the Moto360 finally made a reset, installed the previous Android Version and since then I am fine.
Today Google updated Android Wear to 1.1.1.1901499 by PlayStore, however my Google Play Service stays on 7.3.34.
I suspect Google Play Services 7.3.36 is only for FW 5.1.1 and won't work well with FW 5.02
Cheers
Tom
Click to expand...
Click to collapse
Is there a required battery percent to reset?
I know it was rumor and hear/say, but I was wondering if hope was still alive.
There is with third party apps
Tried the main one, Aerlink. It's a good attempt, I can't really critique as I have zero programming skills. I know the Pebble watch has good support, as do the many fitness trackers that seem to pop up every day.
I understand Apple doesn't want direct competition for their Watch, but still...
right now, google confirms iphone support, but only for the LG Watch Urbane, maybe later we'll get support too. "There is a slight catch though. Android Wear for iOS currently works with the LG Watch Urbane, while future Android Wear watches (including ones from Huawei, Asus and Motorola) will come with built-in support for iOS. "
That sounds like a 2 part update. A software update for the watch, and an actual app for iOS. I say that because if it's just an iOS app, why make the app recognize only one type of Wear hardware and exclude other types of Wear hardware? I suppose marketing comes into play, wanting users to constantly upgrade their hardware.
Seems to be working if your 360 is running the latest update Android Wear 1.3, mine is still running the last update so can't confirm. I can confirm mine will not pair with the current version I am on Android Wear 1.1.1.2006643.
Forgot the Link:
http://www.theverge.com/2015/8/31/9231701/moto-360-does-work-with-the-iphone
IT WORKS! So cool.
I can confirm mine will not pair with the current version I am on Android Wear 1.1.1.2006643.
Click to expand...
Click to collapse
I have had mine and my brothers connected with this version. You don't get watch faces but it does work. We have since updated to the 1.3 and now can use watch faces. the phone are a iphone 5 and a iphone 6 plus(mine)
Mine connected with 1.1.1.2006643, but it is draining the battery like no other. Now, I'm updating it to latest version with another phone, so I'll provide an update on how it works.
I had to remove it set it back up with my m8 to update it. With the watch connected to the iphone it would not update and the battery died very quickly.
after i updated it and resynced back to my iphone it seems fine. i'll give it a couple of days.
I've been running my 360 with my iPhone 6 Plus for 24 hours now and so far the battery drain is marginal.
That is also probably due to me digging into the features and using the watch a lot more than normal.
Big note though, WiFi sync is not available on iOS.
The toggle is not visible on the watch either.
Just got this up and running, not bad really. Mine seems to disconnect and attempt to reconnect a lot, usually giving me some kind of notification on the watch, but when it is connected it works as expected.
Has anyone tried to pair the watch to both an android and an iPhone at the same time?? I bought a few watch faces while attached to a Nexus tablet, but then did a factory reset to get my watch to pair with the iPhone, effectively removing all of my watch add-ons. I'd like to get some back....
Tried to pair with both iPhone and Android and that's a no go.
Also tried to Factory Reset, install on Android with apps and watchfaces and unpair on Android before trying to pair with iPhone.
That was a no go as well.
Probably a way to pair with both possible but no solution yet it seems.
BlazingGlory53 said:
Mine connected with 1.1.1.2006643, but it is draining the battery like no other. Now, I'm updating it to latest version with another phone, so I'll provide an update on how it works.
Click to expand...
Click to collapse
Did it work?
How exactly did you update it to 1.3 with another phone? I've paired my moto360 with and Android phone and updated it but it won`t show on Android Wear iOS to pair...
It seems like Android Wear iOS installs the 1.1 whenever I pair it with moto360. 1.1 is draining my battery so fast it becomes a useless watch. It actually drains faster than the charger can charge.
S.u.c.k.s
Mine was draining battery like crazy. Updated my 360 and 2 resets later all seems like back to Normal with the battery.
mlmfilho said:
Did it work?
How exactly did you update it to 1.3 with another phone? I've paired my moto360 with and Android phone and updated it but it won`t show on Android Wear iOS to pair...
It seems like Android Wear iOS installs the 1.1 whenever I pair it with moto360. 1.1 is draining my battery so fast it becomes a useless watch. It actually drains faster than the charger can charge.
S.u.c.k.s
Click to expand...
Click to collapse
Android Wear for iOS does not modify the OS on your watch.
If your watch is on 1.3, it will not change.
You have to do a factory reset in order to pair it with iOS.
Found this on Reddit written by RobertJP:
First I found one to try LCARS Android Wear Watch Face LCARS Android Wear Watch Face
Then I used the Evozi APK downloader http://apps.evozi.com/apk-downloader/ to get the phone APK
Extracted the APK (like a zip file)
Found the APK meant for the watch (android_wear_micro_apk.apk) in the extractedapk > res > raw folder
Enabled ADB on the watch (Settings > About > tap Build Number I think 7 times which enabled Developer Options)
Swipe back to previous page, Open Developer Options
Tap ADB debugging to enable
Tap Check icon to enable it
You can now type adb shell on your computer which will give you a card on your watch to allow it
Once you have a prompt you can type exit and hit enter to get back to your computers prompt
From there you just type:
adb install /location/of/android_wear_micro_apk.apk
Once it is installed it will say so on the watch and will be available in the watch face selection carousel
BrumBrum74 said:
Found this on Reddit written by RobertJP:
First I found one to try LCARS Android Wear Watch Face LCARS Android Wear Watch Face
Then I used the Evozi APK downloader http://apps.evozi.com/apk-downloader/ to get the phone APK
Extracted the APK (like a zip file)
Found the APK meant for the watch (android_wear_micro_apk.apk) in the extractedapk > res > raw folder
Enabled ADB on the watch (Settings > About > tap Build Number I think 7 times which enabled Developer Options)
Swipe back to previous page, Open Developer Options
Tap ADB debugging to enable
Tap Check icon to enable it
You can now type adb shell on your computer which will give you a card on your watch to allow it
Once you have a prompt you can type exit and hit enter to get back to your computers prompt
From there you just type:
adb install /location/of/android_wear_micro_apk.apk
Once it is installed it will say so on the watch and will be available in the watch face selection carousel
Click to expand...
Click to collapse
This works for a USB cabled watch, Moto 360 won't work.
Works on iPhone 4s also. Or at least it is for me.
Here's my experience. With 1.1 watch os, won't work. Upgraded to 1.3. Can connect with iPhone 5s now. However, only google cards work, not other notifications from other apps. Reset it and went back with aerlink.
Sent from my iPhone using Tapatalk
Ever since I installed Marshmallow on my phone I don't get notifications on my watch. They both say they're connected and my notifications are turned on in the wear app and in sound and notifications in my phone settings. Even when I try to push a fake notification it doesn't work. My watch is running 5.1.1 and my wear app is 1.3.0.2166028. I also have gotten a message on my watch saying there is no Google play installed on my phone but it is. If anybody can help I would appreciate it.
i had an issue at first with mine. what i did was uninstall android wear and unpair with the phone. then, wipe the watch. do a full factory reset. (charge it above 80 percent or itll complain on first boot) then after you get the watch to the screen of pairing install android wear and pair. after this wait for everything to finish. remember the watch does everything over bluetooth at this point so give it some time to sync.
after that it should work. you can test it then inside the app. took me a couple of resets to get my watch working perfectly.