Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS (automatic Line Selection) and this message takes the use of the left soft key rendering useless on the today screen.
I have tried the soft key software and the Shaps advance customisation but the notification message stay on always...
I would try to attach 2 pictures so everybody can have a better idea of my problem. I have make a GREEN CIRCLE pointing to the problem.
Any ideas / solutions would be greatly appreciated.
Regards,
I am having the same problem with I780PUHB3 phone ROM and russian Beeline SIM card. I figured out it depends on SIM card, so you may be lucky asking your carrier for a neew SIM card.
i had the same problem.. but when i install RealVGA, the icon is not in the taskbar anymore, and the left softkey is usable now, maybe is a problem with a space in the screen
I have/had the same problem, but unfortunately there seem to be no solution but to change the sim.
I tried it with two "3"-simcards in Austria: The new one seemingly doesn't have a second line.
remove it from registry
To make the notification disappear, remove the 2 entries under the following registry.
\HKEY_LOCAL_MACHINE\System\State\Shell\Notifications\Active
REMEMBER to back up the registry first. But everytime u get phone service again u need to do the above again.
Anyway, hope this helps.
JMOLINA said:
Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS (automatic Line Selection) and this message takes the use of the left soft key rendering useless on the today screen.
I have tried the soft key software and the Shaps advance customisation but the notification message stay on always...
I would try to attach 2 pictures so everybody can have a better idea of my problem. I have make a GREEN CIRCLE pointing to the problem.
Any ideas / solutions would be greatly appreciated.
Regards,
Click to expand...
Click to collapse
JMOLINA said:
Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS
Any ideas / solutions would be greatly appreciated.
Regards,
Click to expand...
Click to collapse
Make changes in registry as follows:
[\HKEY_LOCAL_MACHINE\Security\Phone\Skin]
Enabled=0
Is there any way to keep the indicator at the top of the screen but suppress the notification message in the bottom left?
I'd like to know which line I currently have selected but don't want to lose the use of the left soft key.
The first registry change in this thread only works until you turn the phone on and off again which is unhelpful.
The second registry change in this thread gets rid of the indicator on the top bar - thus getting rid of the notification message - but that's not quite what I want to do.
As far as i know there is no way of doing what you want, we went through this a while back when i asked the question ages ago and i dont think it has been sorted yet.
Basically the samsung dialer skin brings the line 2 functionality, it is either a choice of using that skin with the line 2 and the annoying notification, or using the standard dialer without.
Its a tough call, i went for the second option. If i ever work it out i will be sure to let you know.
I would love a further fix for this. The problem with the fix below is that I cannot use a skin for the dialer and I much prefer some of the more finger friendly dialers...
[\HKEY_LOCAL_MACHINE\Security\Phone\Skin]
Enabled=0
So any further ideas?
Hello people,
Has anyone solved this problem?
Thanks in advance
Sascha
jliu123 said:
To make the notification disappear, remove the 2 entries under the following registry.
\HKEY_LOCAL_MACHINE\System\State\Shell\Notifications\Active
REMEMBER to back up the registry first. But everytime u get phone service again u need to do the above again.
Anyway, hope this helps.
Click to expand...
Click to collapse
works on my i780 (heineken v.2.1 ROM) thx
Hi,
in some/most ROMs there's the Call History list
with these four Filter Icons at the bottom of the screen
(see screenhsot attached). I am wondering which dll/bmp/reg setting
or whatsoever I have to replace/modify to get this filter icons activated.
Could someone help? I already struggled with tapres.dll and phcanover.bmp
but couldn't get it. Maybe sounds silly for some of you, but it would be
highly appreciated if someone could lead me the way
Olioaglio
Olioaglio said:
Hi,
in some/most ROMs there's the Call History list
with these four Filter Icons at the bottom of the screen
(see screenhsot attached). I am wondering which dll/bmp/reg setting
or whatsoever I have to replace/modify to get this filter icons activated.
Could someone help? I already struggled with tapres.dll and phcanover.bmp
but couldn't get it. Maybe sounds silly for some of you, but it would be
highly appreciated if someone could lead me the way
Olioaglio
Click to expand...
Click to collapse
hy
search in oem\PhoneCanvas
usualy are only png or bmp files
if not those are in of the .dll files from here
br
I think it's the TouchDual Dialer or modifyed one.
hi people, just purchased LP+, and ive noticed there is not
settings icon (PREF), how can it be?
someone knows how to fix that problem?
thank you.
It look so boring with default contact picture.it's possible to change it to another picture. if it can how to do? have to flash it? i try to search but found nothing .hope someone could solve it.
Hello, I just purchased this device and I have a problem..
I found out that when a friend of mine sends me an SMS with Japanese characters in it (or with symbols like these ★☆★), those are not being displayed as they should. They are instead replaced by question marks!!
I thought that maybe it was a font problem, but I couldn't find a way to alter the font in my phone without rooting it..!
Do you know of a way to alter this? I couldn't find something that seemed relevant in the options..
Thanks~
Do you have Japanese enabled in the settings?
It only takes 2 taps to thank somebody here.
which setting + what about the other special(?) chars?
Hello RedLedLight and thank you for the reply!!!!!!
Could you be a bit more specific? Which settings are you refering to? There's too many.. Are you refering to the system settings(where to find the one you want), or the settings of the stock messenger app?
Well, Japanese is not supported as an input method of the stock keyboard. That's why I had to download another one which would enable me to write in Japanese.. Still, I could write and send messages with Jap chars, but when I receive an SMS, then I'd just get question marks all over!
Also, any ideas as to the why those other chars are not being displayed? They're not Japanese.. In my samsung phone there's some symbols like ♡♥ºº•○●□■◇◆♧♣▲▼▶◀↑↓←→☆★▪ who ALSO appear as question marks when I send them to this phone!!! :S