Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS (automatic Line Selection) and this message takes the use of the left soft key rendering useless on the today screen.
I have tried the soft key software and the Shaps advance customisation but the notification message stay on always...
I would try to attach 2 pictures so everybody can have a better idea of my problem. I have make a GREEN CIRCLE pointing to the problem.
Any ideas / solutions would be greatly appreciated.
Regards,
I am having the same problem with I780PUHB3 phone ROM and russian Beeline SIM card. I figured out it depends on SIM card, so you may be lucky asking your carrier for a neew SIM card.
i had the same problem.. but when i install RealVGA, the icon is not in the taskbar anymore, and the left softkey is usable now, maybe is a problem with a space in the screen
I have/had the same problem, but unfortunately there seem to be no solution but to change the sim.
I tried it with two "3"-simcards in Austria: The new one seemingly doesn't have a second line.
remove it from registry
To make the notification disappear, remove the 2 entries under the following registry.
\HKEY_LOCAL_MACHINE\System\State\Shell\Notifications\Active
REMEMBER to back up the registry first. But everytime u get phone service again u need to do the above again.
Anyway, hope this helps.
JMOLINA said:
Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS (automatic Line Selection) and this message takes the use of the left soft key rendering useless on the today screen.
I have tried the soft key software and the Shaps advance customisation but the notification message stay on always...
I would try to attach 2 pictures so everybody can have a better idea of my problem. I have make a GREEN CIRCLE pointing to the problem.
Any ideas / solutions would be greatly appreciated.
Regards,
Click to expand...
Click to collapse
JMOLINA said:
Hi every one and thanks in advance for your help.
On my Samsung i780, there is no way to accept/dismiss the ALS
Any ideas / solutions would be greatly appreciated.
Regards,
Click to expand...
Click to collapse
Make changes in registry as follows:
[\HKEY_LOCAL_MACHINE\Security\Phone\Skin]
Enabled=0
Is there any way to keep the indicator at the top of the screen but suppress the notification message in the bottom left?
I'd like to know which line I currently have selected but don't want to lose the use of the left soft key.
The first registry change in this thread only works until you turn the phone on and off again which is unhelpful.
The second registry change in this thread gets rid of the indicator on the top bar - thus getting rid of the notification message - but that's not quite what I want to do.
As far as i know there is no way of doing what you want, we went through this a while back when i asked the question ages ago and i dont think it has been sorted yet.
Basically the samsung dialer skin brings the line 2 functionality, it is either a choice of using that skin with the line 2 and the annoying notification, or using the standard dialer without.
Its a tough call, i went for the second option. If i ever work it out i will be sure to let you know.
I would love a further fix for this. The problem with the fix below is that I cannot use a skin for the dialer and I much prefer some of the more finger friendly dialers...
[\HKEY_LOCAL_MACHINE\Security\Phone\Skin]
Enabled=0
So any further ideas?
Hello people,
Has anyone solved this problem?
Thanks in advance
Sascha
jliu123 said:
To make the notification disappear, remove the 2 entries under the following registry.
\HKEY_LOCAL_MACHINE\System\State\Shell\Notifications\Active
REMEMBER to back up the registry first. But everytime u get phone service again u need to do the above again.
Anyway, hope this helps.
Click to expand...
Click to collapse
works on my i780 (heineken v.2.1 ROM) thx
Related
Hi Everyone,
I upgraded to the O2 WM6 ROM last night and theres a few things I cant do that I could on WM5 and was wondering if someone could tell me how.
1. On the desktop i cant get the two buttons at the bottom to change from Calender on the left and contacts on the right.
2. The running problems icon has gone from the start menu options and I cant find it anywhere
I know these are trivial but you know what its like when you set something up the way you want and get use to it and then its taken away.
Cheers everyone.
parf said:
Hi Everyone,
I upgraded to the O2 WM6 ROM last night and theres a few things I cant do that I could on WM5 and was wondering if someone could tell me how.
1. On the desktop i cant get the two buttons at the bottom to change from Calender on the left and contacts on the right.
2. The running problems icon has gone from the start menu options and I cant find it anywhere
I know these are trivial but you know what its like when you set something up the way you want and get use to it and then its taken away.
Cheers everyone.
Click to expand...
Click to collapse
Hi,
1. Just copy the file into the windows folder, do a soft reset, and go to start\settings\system... you will find the solution to remap the softkeys...
View attachment SoftKeyApplet.zip
2. Install this program. It will make an icon to the top right of the today screen. By this icon you can manage your running programs.
View attachment X-Button-1.5.zip
Cheers.
Cheers zsitvayb, worked a treat.
Is there a way to remove the battery indicator from the bottom right corner of the desktop next to the comm manager. Im using batterystatus which is more accurate so i have no need for it
parf said:
Cheers zsitvayb, worked a treat.
Is there a way to remove the battery indicator from the bottom right corner of the desktop next to the comm manager. Im using batterystatus which is more accurate so i have no need for it
Click to expand...
Click to collapse
Yes, that's possible. You shold do some registry tweaking... Hereby you can find a descriptipn about the registry tweaking: http://wiki.xda-developers.com/index.php?pagename=Artemis_Registry
Thanks again.
Can i ask one more, it will be the last.
When you go to text messages the left soft key is delete where as in WM5 it was new. Any way to change this back to New.
Thanks for all your help
parf said:
Thanks again.
Can i ask one more, it will be the last.
When you go to text messages the left soft key is delete where as in WM5 it was new. Any way to change this back to New.
Thanks for all your help
Click to expand...
Click to collapse
Not that I know of, but you can replace the soft menu keys on the Today Screen with this...
http://www.freewarepocketpc.net/ppc-download-wm5-new-menu.html
hi, i just want to ask a quick question, can you make the screen more sensative with a quick tweek of the registry?
mine sometimes just does not work and i have to really tap the screen to get it to work, its bad on texting as i have to keeo going back and having to respell stuff.
anyone got any ideas??
Sensitivity
You sure can change the sensitivity of the touchscreen. I've changed the sensitivity of the touchscreen by editing the register. Unfortunately at the moment i do not know which register key you should edit.
thats a start, i didnt think you could but thought to ask the question anyway, does anyone know any reg keys that you need to change to do this??
would be a huge help,
MaxCalError
joey jojo said:
hi, i just want to ask a quick question, can you make the screen more sensative with a quick tweek of the registry?
Click to expand...
Click to collapse
Hi Joey,
Isn't it this key:
http://msdn2.microsoft.com/en-us/library/ms894765.aspx
Cheers, Peter
nope, that's not it.
HKLM\Drivers\TouchPanel\PressureThreshold
higher value = more sensitive
Screen sensitivity - what values
Hi
I have Orbit (touch cruise) with Artemis Touch v4.02 ROM, with touchflo
This ROM has a program in settings called 'advanced config'.
Many settings can be done here without going into registry - including sensitivity.
However I have a question
After installation the setting was at about 7000 - I have tried mutliple settings between 2000 and 7000 but none seem to have much change.
My main problem is scrolling the address book. It is hopeless compared to the iPhone.
Nearly every attempt to scroll opens a contact at some stage in the scroll. Solution is to drag up left or right side of screen to appropriate letter eg 'B' then slowly drag to eg 'Bill'
Any ideas appreciated.
Thanks ColinK
Hi Guys,
I would like to know if it's possible for the Touch Pro 2 screen keyboard to support word suggestion (suggwords) and dynamic auto completion just like in the "good old" SIPs from days of TytnII. eg when i type "goo", I would like "good morning" to appear as a suggested word based on my past use.
I like the layout of the HTC stock Full Qwerty keyboard but much prefer the old system over the new xt9 system.
Any advise on whether and how the above can be achieved would be greatly appreciated!
cheers,
anyone?
I have the same issue. I would love to have the auto complete and suggested words working on my TP2
Use the Advanced Configuration Tool - works
http://www.touchxperience.com/en/advanced-configuration-tool.html
Solution
Hi all,
I had the same problem and could get rid of it via HD Tweak tool, which you can find here: HD Tweak
What I did was simply "20. Keyboard (SIP)" options, I have disabled 20.1 - Automatic display popup, enabled 20.2 T9 Mode and 20.3 Suggest Words to 4 words; and restart.
Now I get 4 recommendations easily when I am sending and sms etc. just like the old days in Kaiser; Works like a charm
I hope it helps.
zxcvbnmnbvcxz said:
Hi Guys,
I would like to know if it's possible for the Touch Pro 2 screen keyboard to support word suggestion (suggwords) and dynamic auto completion just like in the "good old" SIPs from days of TytnII. eg when i type "goo", I would like "good morning" to appear as a suggested word based on my past use.
Click to expand...
Click to collapse
Diable eT9. Enable COMP IME. This is a registry edit.
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
That will bring you back to the good old word suggestion and dynamic auto completion.
Hope this helps.
thank you thank you thank you!
this ##"¤%#¤ was driving me nuts!
i can write again
stupid me i forgot to write down the original settings for this. Could some please look in their registry & please tell me what the default values for this are?
*edit* never mind i found them:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\et9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : eT9 IME change to Layout Text : COMP IME
And soft reset.
*Warning*
Changing this registry to COMP IME disables your "SYM' hardware keyboard option
weenween said:
Diable eT9. Enable COMP IME. This is a registry edit.
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
That will bring you back to the good old word suggestion and dynamic auto completion.
Hope this helps.
Click to expand...
Click to collapse
Many thanks, but only one question:
I use frequently as input method the letter recognizer in my HTC Touch HD. With your modifications in the registry, I saw a list of 4 words suggested dinamically (which changes) when introducing one or another letter.
BUT, when I introduce a word that is not in the dictionary (a technical medical word, for example) in one appointment or SMS, and I want to introduce again (in another appointment or SMS) the first two or three letters again, this word is not suggested. It seems like this word is not incorporated in the custom dictionary.
I remember this new word introduced in one appointment or a SMS, was suggested when I introduce the first letters as one of 4 of the list, in my old QTEK s200 (HTC Prophet).
Do you know if is necessary any registry modifications to obtain this feature?
Best Regards and many thanks
can some send me compime.dll?
I don't see compime.dll in the Windows folder on my Tilt2. att probably removed it.
That HD Tweak worked great. When I do the reg edit on my Tmo TP2 I lose the space bar on the software keyboard...Tj
motoq9h said:
can some send me compime.dll?
I don't see compime.dll in the Windows folder on my Tilt2. att probably removed it.
Click to expand...
Click to collapse
its not, nor has ever been in my \Windows directory for my Tmo TP2, yet the registry tweak still worked. Maybe its just not viewable, even though I have it to show all files
xnifex said:
its not, nor has ever been in my \Windows directory for my Tmo TP2, yet the registry tweak still worked. Maybe its just not viewable, even though I have it to show all files
Click to expand...
Click to collapse
Thanks. I just confirmed that the file is present and hidden. I tried this hack but it completely messed up the Hard keyboard on the Tilt2. Reverting back..
weenween said:
Diable eT9. Enable COMP IME. This is a registry edit.
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
That will bring you back to the good old word suggestion and dynamic auto completion.
Hope this helps.
Click to expand...
Click to collapse
I tried the above and was able to get the auto complete (the person I want to send txt or mail too), but for this:
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
XT9SupportMSSip was already set to 0. I still cant get auto suggest to work.
I tried setting WordCompletion to 1 from 0, but that did work either.
Anyone get it working? How?
***UPDATE*** Never mind, I used AdvanceConfigTool to set word suggest to 4 words. It was set to 0, so I got 0.
HAPPY NOW!
RojasTKD said:
I tried the above and was able to get the auto complete (the person I want to send txt or mail too), but for this:
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
XT9SupportMSSip was already set to 0. I still cant get auto suggest to work.
I tried setting WordCompletion to 1 from 0, but that did work either.
Anyone get it working? How?
***UPDATE*** Never mind, I used AdvanceConfigTool to set word suggest to 4 words. It was set to 0, so I got 0.
HAPPY NOW!
Click to expand...
Click to collapse
Which version of TP2 do u have? Tmobile? Doing this change on ATT's Tilt2 completely screwed up the HW Keyboard, and I had to reset to factory..
motoq9h said:
Which version of TP2 do u have? Tmobile? Doing this change on ATT's Tilt2 completely screwed up the HW Keyboard, and I had to reset to factory..
Click to expand...
Click to collapse
I did this on my Tilt 2 and did not have any issues with my HW keyboard.
I only wish I could edit the fallowing options:
1. Number of letter before it Auto Suggest a word.
2. Set it to not automatically insert a space after I select a suggested word.
Anyone know how to do this?
Aside from that it works great.
The first time I did it, the next day it gave my a keyboard without a spacebar, it had a ".com" & "/" key instead. I did a Clear Storage and did it all again and it works fine now.
UPDATE: Well it was working until I enter my owner info and while inputting my phone number the keyboard switched to a number keypad and now it stuck there. I can't get the regular keyboard to pop back up.
This is getting frustrating!
TrekkerJmm said:
That HD Tweak worked great. When I do the reg edit on my Tmo TP2 I lose the space bar on the software keyboard...Tj
Click to expand...
Click to collapse
OK after a few days with HD Tw for some reason on my T-mo TP2 the software keyboard goes to a number only keyboard with the letters P & W so I have to put it back the original way and restart the phone then go back into HD Tw and redo the settings again anyone else have this problem? ...Tj
Best I can tell when the reg is edited to replace eT9 with the original Auto suggest & Auto Complete once the number keyboard come up, it wont go away.
this is a real bummer, I like the nice Touch input keyboard BUT I much prefer the original Auto suggest & Auto Complete. SO far I can't find a way to keep both.
RojasTKD said:
Best I can tell when the reg is edited to replace eT9 with the original Auto suggest & Auto Complete once the number keyboard come up, it wont go away.
this is a real bummer, I like the nice Touch input keyboard BUT I much prefer the original Auto suggest & Auto Complete. SO far I can't find a way to keep both.
Click to expand...
Click to collapse
EXACTLY my problem... I found out that is wont switch unless I need to select a number on my calender otherwise it lasts a couple days. I wonder if this will do this with all Rom's or just T-Mo...Tj
TrekkerJmm said:
EXACTLY my problem... I found out that is wont switch unless I need to select a number on my calender otherwise it lasts a couple days. I wonder if this will do this with all Rom's or just T-Mo...Tj
Click to expand...
Click to collapse
I have a Tilt 2 and running AT&T's stock ROM. For now I'm sticking with the eT9 as to keep an actual usable SW keyboard. Hope there a solution soon.
Hi guys,
I just picked up my MDA Vario V and noticed that some things seem to be missing compared to the normal TP2
-TF3D2 style notification bubbles
-New notification manager
-Facebook upload feature
-Option to disable the icon screen you get when clicking on the taskbar.
Is there a way to fix this through cabs, or do I need to wait for HardSPL to come out and flash a new rom?
woeds said:
Hi guys,
I just picked up my MDA Vario V and noticed that some things seem to be missing compared to the normal TP2
-TF3D2 style notification bubbles
-New notification manager
-Facebook upload feature
-Option to disable the icon screen you get when clicking on the taskbar.
Is there a way to fix this through cabs, or do I need to wait for HardSPL to come out and flash a new rom?
Click to expand...
Click to collapse
main reason why i stay clear of t-mobile branded stuff! they just can't help themselves can they? also phone will be locked to their network i bet! t-mobile is a good network but the murder these phones. sorry to see some stuff is missing but there may be hope for you in the blackstone forum! just have a look in there
Thanks for the tip. I now have the new notification screen and bubbles working. Only thing left is the Facebook integration.
does anybody know how to activate the facebook function on the MDA Vario 5?
t-design said:
does anybody know how to activate the facebook function on the MDA Vario 5?
Click to expand...
Click to collapse
This should get facebook working...
Do the following 3 reg edits...
HKCU\Software\HTC\Manila\
1. Facebook.Disable (Set the DWORD to 0)
2. Manila://people\browserlayer\peopleupdate.page.hidden (Set the DWORD to 0)
3. Manila://PeopleDetail\peopleView.page.hidden (Set the DWORD to 0)
Then do a soft reset of the device and it should work
Thanks for your help. But it does not work On the one hand now you can go on "Me" (contact card) and can see the facebook button at the bottom (it wasn't there before changing the registry settings). But by trying to start the "app" nothing happens. it's like a block..
BennyT
t-design said:
Thanks for your help. But it does not work On the one hand now you can go on "Me" (contact card) and can see the facebook button at the bottom (it wasn't there before changing the registry settings). But by trying to start the "app" nothing happens. it's like a block..
BennyT
Click to expand...
Click to collapse
What is it you're trying to start? When you are in "People", can you not go to "Updates" and link to a facebook profile?
nicelad_uk said:
What is it you're trying to start? When you are in "People", can you not go to "Updates" and link to a facebook profile?
Click to expand...
Click to collapse
I think so. I've got the german device, so I don't really know how the tabs are named on the english one. But I think I know what you mean. So I think normally you should have some kind of an "action" button for each contact where you can see the facebook status, etc.? I haven't got this tab. My tabs for each contact are: Details (with all numbers and adresses,etc); sms messaging, e-mail and phone history
BennyT
shingers5 said:
main reason why i stay clear of t-mobile branded stuff! they just can't help themselves can they? also phone will be locked to their network i bet! t-mobile is a good network but the murder these phones. sorry to see some stuff is missing but there may be hope for you in the blackstone forum! just have a look in there
Click to expand...
Click to collapse
I got the MDA Vario 5 as well. To my delight, it wasnt sim-locked.
So far, not much missing or added to the phones ROM by TMobile.
They have some Web n Walk stuff added as an 'Internet' tab and like the other guy mentioned, some notification stuff is missing.
woeds said:
Thanks for the tip. I now have the new notification screen and bubbles working. Only thing left is the Facebook integration.
Click to expand...
Click to collapse
Hey can you point me to the fix you applied? Thanks!
t-design said:
I think so. I've got the german device, so I don't really know how the tabs are named on the english one. But I think I know what you mean. So I think normally you should have some kind of an "action" button for each contact where you can see the facebook status, etc.? I haven't got this tab. My tabs for each contact are: Details (with all numbers and adresses,etc); sms messaging, e-mail and phone history
BennyT
Click to expand...
Click to collapse
Do you have this screen when in the contact...
Hi boys,
i don't have TP2, just TP1, but I am solving this problem too...i have a ported version of TF3D2 without facebook integration, but I was able to get it working.
I've attached all files that I needed for FB integration. Some files are hidden..
Copy only those manila files that are not included in your ROM.
Maybe the only needed file will be FacebookSDK.dll
copy all needed to \Windows\ folder...
hope I helped a bit
PS: you also have to make registry edit mentioned before.
nicelad_uk said:
Do you have this screen when in the contact...
Click to expand...
Click to collapse
No, I do not have this screen But after copying some files (incl. the FacebookSDK.dll) out of the fb.zip I got the following:
My own contact-card (screen2)
Contact-Card of a contact in "view-mode" (screen1) --> "Events-Tab" is missing
Contact-Card of a contact in "edit-mode" (screen3)
If I want to link a contact with a foto, I get screen4 --> After choosing "Facebook-Profil" I get the list with all my facebook contacts (screen5)
Edit: Sorry, the attached thumbnails aren't in the right order. So: "Screen2" is the first one, "Screen1" is the last, "Screen3" is the fourth, "Screen 4" is the third and "Screen5" is the second one.
I did not have any of these "facebook-links" in my TF3D-menus before.
Does anybody have an idea how to fix the problem with the events-tab ?
BennyT
does anybody know how to activate the "progams-tab" in the slider?
BennyT
Hey everyone,
I cant seem to work out how to get auto complete to work when using the hardware keyboard.
It worked on my TYTN II and i really liked the feature as i am entering service log numbers and i dont have to look at my book each time to see what the next number is.
Any ideas how to get this going>
I have set in advanced config for word suggestion to 4 (it was on 0) and in input options > options > xt9 settings > i ticked word completion in abc mode (for phone keypad only) and its not coming up.
I have soft reset the phone as well.
Have tried searching but havnt found much.
Cheers
dude u have to search for enabling old type completion.. I did it...and it works... before that I had the same problem - here - http://forum.xda-developers.com/showthread.php?p=4049651#post4049651
Thanks for that!
Found it, and now im happy
Here is the fix incase anyone else wanted this.
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
Great ! works like a charm.
Cool.... been looking for this.
Shadoxity said:
Thanks for that!
Found it, and now im happy
Here is the fix incase anyone else wanted this.
Click to expand...
Click to collapse
This is my first post, so please forgive me if the answer has already been provided somewhere else.
I have a TP2 purchased in Hong Kong that has the Chinese Fonts built into the ROM. The ROM version is 1.19.721.1 (51489) WWE.
I have checked in the registry and there is no HKLM\Software\Tegic entry.
The other keys are
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File :\windows\compime.dll
and
Layout Text : COMP IME
Word completion using the onscreen keyboard and/or hardware keyboard does not work.
There is no normal keyboard available for selection, only the Touch Input
Could anyone advise how to fix this?
Thanks in advance, Gary
this should do it
http://forum.xda-developers.com/showthread.php?t=534126- for the pdac hebrew
Just wondering if anyone has faced the qwerty keyboard changed to a funny number key pad that has only 2 alphabet p and w in it? I am wondering if it is because of this tweak that is causing it. It will change without new software installation after a few days of usage. It has happened to me in 3-4 occasions already.
Only way to overcome it is for me to restore to previous backup. After a few days, same thing would happen and again I have to restore. So frustrating!
st8800 said:
Just wondering if anyone has faced the qwerty keyboard changed to a funny number key pad that has only 2 alphabet p and w in it? I am wondering if it is because of this tweak that is causing it. It will change without new software installation after a few days of usage. It has happened to me in 3-4 occasions already.
Only way to overcome it is for me to restore to previous backup. After a few days, same thing would happen and again I have to restore. So frustrating!
Click to expand...
Click to collapse
Yea it happens to me to!
Changing the reg keys back fixes it but then i loose auto complete... stupid bloody HTC, why couldnt they just make it all work!!!
I seem to get the proper keyboard in my text messages though, and everywhere else the numbers :S
Hmm.... seems that this tweak is causing the keyboard problem then?
I really dont want to lose the auto-complete feature.
i wish one of the smarter members of the community could work it out!
Same problem here! And it's very frustrating to be trying to type words and have numbers appear... please help! I did the registry edit and am having number appear when I press letters on the keyboard......
chocovash said:
Same problem here! And it's very frustrating to be trying to type words and have numbers appear... please help! I did the registry edit and am having number appear when I press letters on the keyboard......
Click to expand...
Click to collapse
Normally, all you have to do to enable the word completion on the hardware keyboard is to pop up the SIP keyboard and tick the box at the left of the keyboard from "ABC" to "XT9," then simply slide out the hardware keyboard. It works for me every time.