Kernel version "Unavailable" Help - G3 Q&A, Help & Troubleshooting

I have used stock rooted ROM from robalm, ver 20u with Gabriel kernel. today I decided to try out new Fulmics ROM from xpirt. of course I made full backup with TWRP, flashed the ROM w/o problems.
after I tried the ROM a bit I decided to go back and restore my previous ROM. everything went fine except I get a warning message after boot:
Current version is not available for user. can't find matched cust for NT-code mcc/mnc [FFFFF],subset[11]
in software information about kernel version it says unavailable. naturally I went into TWRP and flashed kernel again with cache/dalwik cache wipe. no luck, result is the same.
my guess would be that something from previous ROM test survived wiping and is giving me the error. my question would be is this and how possible? any info on the subject? I've seen some threads about the issue around but no solution or explanation why it happened. I'll try flashing robalm's ROM and then restore my backup once more. other than that any info appreciated.
thx!

ok, flashing my ROM zip and then making restore did the trick. of course, I again did full wipe after flashing zip, before doing the restore. so the questions remain: did anything from previous ROM survived wipe and is that even possible?
with Fulmics ROM there was a problem where people coming from AOSP roms experienced problem with WiFi not connecting. the solution was to flash stock based rom first and then Fulmics rom and then the WiFi would work. that's what gave me the idea of something remaining after full wipe. otherwise there wouldn't be need for flashing two roms. my recent experience adds to the theory, where flashing zip first laid the ground for restore to work flawlessly this time, even with full wipe before doing restore.
it doesn't make sense. how is this possible? shouldn't full wipe perform...well...full wipe?

Related

[Q] Can I return to stock Koodo?

Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).
Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!

A few questions regarding install custom ROMs

hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
PUTALE said:
hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
Click to expand...
Click to collapse
1. No you do not need to run triangle away usually only have to run it if you are going back to stock and may want to return the phone.
2.Nope it has a Rom you are rooted !
3.That is what I do when installing a new rom factory reset wipe davlik and cache and install you may have to fix permissions with some installs as well after installing.
4.From the bit I played with the new Clean rom it is very stable with minimum if any grief Jedi 9 is also a awesome ROM and my current fave.
5.Just read up lots before you do it follow every step they tell you to take your time it is easy just make sure ya know what you are doing before you start.
6.Enjoy they are a awesome phone !!
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
PUTALE said:
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
do a backup in twrp before flashing a new one, you can always come back
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
DoctorQMM said:
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
Click to expand...
Click to collapse
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
[email protected] said:
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
Click to expand...
Click to collapse
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
PUTALE said:
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
Click to expand...
Click to collapse
Think of your Nandroid (TWRP) backup as a roll back to what you are comfortable with (check everything off so you do not lose a thing if you want) in case you find that the new thing you flashed isn't all that it was cracked up to be for you or something messes up. The Nandroid backup is EVERYONE's friend.
As for flashing a new ROM and having to start all over, I will use this as an example: I have two backups; one for Paranoid Android (4.2.1 AOSPA) and Clean 4.2.5 (4.1.2). When I originally flashed my stock to Clean, I must've gotten lucky by just wiping the system (ROM only and not a factory reset) and all my data transferred over just fine with no issues... but when flashing to PA, I had to do a full wipe then start from scratch (which was not bad if you sync your apps and contacts thru Google). Also, you might want to get another backup system such as Super Backup to back up your contacts and SMS messages (be careful with backing up call logs if you go to 4.2.1 ROMs because for some reason, things went wacky for me). Titanium is a good system to use for power users but sometimes, to keep it as simple as possible, count on Google at first for your app syncing (and if you get Amazon App Store, you will have to get that APK to download the apps from that store).
Anyway, from there (if you want to play with multiple ROMs) you now have a foundation. Dirty flashing (flashing a new version of a ROM you currently have without doing a full wipe... just in case you didn't know... for me, I just wipe System [no factory reset] then flash the upgrade) should be fine... again, I'm typing from experience because there are some people who do run into issues dirty flashing and is usually not supported by the devs unless you do a full wipe and flash. I have not had any issues whatsoever dirty flashing both PA and Clean versions.
As for methods of wiping, honestly they're all right... I just posted what I usually do when I want to do a full wipe. Only if you want to do a dirty flash, you won't have to wipe or do a partial wipe (I partial wipe e.g. Clean 4.0.5 to 4.2.5: Delete last Clean Rom backup through the Restore menu, Nandroid Back Up current working Clean Rom 4.0.5, Wipe System, Install the new 4.2.5, wipe Davlik and Cache (again, I do this just in case but some devs say it's unnecessary), then reboot and wait for the apps to reset... all was where it was when I left 4.0.5.
PUTALE said:
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
Click to expand...
Click to collapse
Yes... if you're retaining your current modem and recovery... to restore a rom just as it was when you backed it up, restore boot (which has the kernel), system and data. One your second question, when restoring a different rom , it's best to always restore system/data/boot together. You can use TiBu to restore your user app DATA, and individual apps usually have their own backup files you can restore (like Nova/Apex launchers [which can restore your widgets], calendar, etc).
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
I have never used that rom so I can't say for sure. Try it out and see what happens. If you don't like it, restore your backup.
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
That rom is one of the most recent 7105 (note2 international) samsung firmware releases... supposedly better battery life than LL7 or LL4. It's the stock MA6 pre rooted (i.e., has SuperSU app and binaries included). No other features added like you would find with CleanROM 4.2.5 for example. It includes rom and kernel... so it will write to your system, data, and boot partitions. Whatever custom recovery you have now and flash this with will not be touched.
thanks again.

[Q] Best way to fully wipe, and install newest CM? (Currently on older version of CM)

Hey I've been reading conflicting information about this, a lot of which was posted more than a year ago, so I wanted to make a new post just to see if there are any ways that are the most popular/easier now...
I'm currently rooted and running CyanogenMod M2. My phone has been having lots of issues no matter what ROM or Kernal I'm running (just battery life issues and just general slowness).
So I bought a new higher capacity battery and looking to just start my phone over fresh, completely wiping the phone's "SD" card. My goal is to completely wipe the phone, install the newest CyanogenMod and a new kernel.
I've heard two more popular ways, one would be to just relock then unlock the bootloader again which would completely wipe it (I'm confused exactly where that would leave me after I unlocked the bootloader again.. what ROM would it be currently running and would I be rooted, etc).
the other is to just completely wipe it using the option in Clockwork Mod Recovery, but I'm not sure how to install a new OS after I just wiped it since the .zip for the new CM would have been wiped when I did that.
Just reflash factory images through the provided scripts by Google - as you may know, they're available for Linux and Windows, then reflash a custom recovery, reboot. Let it boot once, don't setup Google account now; copy your ROM of choice + gapps if needed (refer to instructions on first post of the ROM thread), custom kernel, whatever. reboot to recovery, factory reset, format /system, flash ROM, kernel, gapps, reboot. Wait for it... Done. This is a clean flash. Setup your device.
Sent from my Nexus

Going from stock to stock (basically just wiping) while on CWM recovery

I'm already on the stock KK ROM (E98020g)., but with the CWM recovery. I just want to wipe everything while keeping the stock ROM, but I've seen that factory resetting or flashing stock ROMs while on a custom recovery will probably cause a some sort of brick...
I've already briefly seen the pinned stock ROM tutorial already. Before I try that (assuming it still works), can anyone tell me if there's a simpler way? It's going to take me a long time to go through that entire thread so it would be an immense help if someone could just tell me.
Have you try using system setting, storage, hard reset?
hawkwind212 said:
Have you try using system setting, storage, hard reset?
Click to expand...
Click to collapse
That's what I meant by "factory reset", sorry. Everything I've read indicates that this will cause a softbrick, which I'm trying to avoid. Is this info wrong?
I assume the reason that you install cwm and running the stock ROM is so you can have a nandroid backup? Otherwise Why else would you installed a custom recovery? So backup the ROM and do the factory reset with kk instead of cwm, which may be the reason that some people are getting the soft bricks. I can't guarantee you that everything will be according to the plan, but that's the reason backup function is there.
I originally installed CWM because I wanted to wipe and try out a custom ROM (probably CM). But then I noticed all the serious issues people were having with various custom ROMs, so I decided to skip the custom rom (for now) and just get on with wiping. I really don't want to risk any type of brick with this device.
Anyway, I think I'm going to try out the pinned stock rom thread I mentioned in the OP.

ANY custom recovery/rom kills IMEI/BASEBAND!!!!

Was on 4.4.2 stock NJ2...Odin'ed a custom recovery like TWRP...rebooted.....NO IMEI and BASEBAND. That's about as simple, yet complex it gets. Tried reverting back to stock recovery in Odin, only to find that NO IMEI and BASEBAND still shows up. THE ONLY way I've successfully kept the IMEI/BASEBAND....is by keeping everything stock, from recovery to rom. Why would this be? I've even tried restoring the EFS folder....to no avail!!!! I'M FRUSTRATED!!!! My end goal is to be able to flash a rom, use TWRP/CWM, and KEEP the IMEI/BASEBAND!!!
ANY HELP? ANYONE having the same issue or fix?
THANKS!!!!!!:good:
Possible fix...
Make sure you have not used device encryption on the rom prior to your desired rom...
If you have then a device full wipe script is needed to clean up the phone prior to flashing the new rom...
(don't forget to check your SD card for encryption or data files that may be affected)...
Flash TWRP version 2.8.6.0 and flash your new rom....
Higher TWRP versions have been buggy for me...
Best I've got atm....g
It's because you are using TWRP 3.0.0.1, that one is broken

Categories

Resources